Escolar Documentos
Profissional Documentos
Cultura Documentos
o
t
h
e
r
b
o
a
r
d
P4S533-MX
User Guide
ii
C
h
e
c
k
l
i
s
t
Copyright 2003 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(ASUS).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners benefit, without intent to infringe.
E1221
Revised Edition V2
January 2003
iii
F
e
a
t
u
r
e
s
Contents
Notices ............................................................................................ v
Safety information .......................................................................... vi
About this guide............................................................................. vii
ASUS contact information ............................................................ viii
P4S533-MX specifications summary.............................................. ix
Chapter 1: Product introduction
1.1 Welcome! ........................................................................... 1-2
1.2 Package contents ............................................................... 1-2
1.3 Motherboard components .................................................. 1-3
1.4 Special Features ................................................................ 1-6
1.5 Motherboard layout ............................................................ 1-7
1.6 Before you proceed ............................................................ 1-8
1.7 Motherboard installation ..................................................... 1-9
1.7.1 Placement direction ............................................... 1-9
1.7.2 Screw holes ........................................................... 1-9
1.8 Central Processing Unit (CPU) ......................................... 1-10
1.8.1 Overview............................................................... 1-11
1.8.2 Installing the CPU ................................................. 1-11
1.9 System memory ............................................................... 1-12
1.10 Expansion slots ................................................................ 1-13
1.10.1 Standard interrupt assignments ........................... 1-13
1.10.1 IRQ assignments for this motherboard ................ 1-13
1.11 Jumpers............................................................................ 1-14
1.12 Connectors ....................................................................... 1-16
Chapter 2: BIOS information
2.1 Managing and updating your BIOS .................................... 2-2
2.1.1 Using ASUS EZ Flash to update the BIOS ............ 2-2
2.1.2 Using AFLASH to update the BIOS ....................... 2-4
2.1.3 CrashFree BIOS feature ........................................ 2-7
2.2 BIOS Setup program.......................................................... 2-8
2.2.1 BIOS menu bar ...................................................... 2-8
iv
S
a
f
e
g
u
a
r
d
s
Contents
2.2.2 Legend bar ............................................................. 2-9
2.3 Main Menu........................................................................ 2-10
2.3.1 Primary and Secondary Master/Slave ................. 2-12
2.3.2 Keyboard Features .............................................. 2-14
2.4 Advanced Menu ............................................................... 2-15
2.4.1 Chip Configuration ............................................... 2-17
2.4.2 I/O Device Configuration...................................... 2-19
2.4.3 PCI Configuration ................................................ 2-20
2.5 Power Menu ..................................................................... 2-22
2.5.1 Power Up Control ................................................ 2-24
2.5.2 Hardware Monitor ................................................ 2-25
2.6 Boot Menu ........................................................................ 2-26
2.7 Exit Menu ......................................................................... 2-28
Chapter 3: Software support
3.1 Install an operating system................................................. 3-2
3.2 Support CD information ...................................................... 3-2
3.2.1 Running the support CD ........................................ 3-2
3.2.2 Drivers menu ......................................................... 3-3
3.2.3 Utilities menu ......................................................... 3-3
3.2.4 ASUS Contact Information ..................................... 3-4
v
Notices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturers instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
The use of shielded cables for connection of the monitor to the
graphics card is required to assure compliance with FCC regulations.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the users authority to
operate this equipment.
vi
Safety information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal
cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
Seek professional assistance before using an adpater or extension
cord. These devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you
are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
Before installing the motherboard and adding devices on it, carefully
read all the manuals that came with the package.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a
qualified service technician or your retailer.
vii
About this guide
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS Websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. The ASUS websites are listed in the
ASUS Contact Information on page viii.
2. Optional Documentation
Your product package may include optional documentation, such as
warranty flyers, that may have been added by your dealer. These
documents are not part of the standard package.
WARNING/DANGER: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
viii
ASUS contact information
ASUSTeK COMPUTER INC. (Asia-Pacific)
Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112
General Tel: +886-2-2894-3447
General Fax: +886-2-2894-3449
General Email: info@asus.com.tw
Technical Support
MB/Others (Tel): +886-2-2890-7121 (English)
Notebook (Tel): +886-2-2890-7122 (English)
Desktop/Server (Tel): +886-2-2890-7123 (English)
Support Fax: +886-2-2890-7698
Support Email: tsd@asus.com.tw
Web Site: www.asus.com.tw
ASUS COMPUTER INTERNATIONAL (America)
Address: 6737 Mowry Avenue, Mowry Business Center,
Building 2, Newark, CA 94560, USA
General Fax: +1-510-608-4555
General Email: tmd1@asus.com
Technical Support
Support Fax: +1-510-608-4555
General Support: +1-502-933-8713
Web Site: www.asus.com
Support Email: tsd@asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address: Harkortstr. 25, 40880 Ratingen, BRD, Germany
General Fax: +49-2102-442066
General Email: sales@asuscom.de (for marketing requests only)
Technical Support
Support Hotline: MB/Others: +49-2102-9599-0
Notebook: +49-2102-9599-10
Support Fax: +49-2102-9599-11
Support (Email): www.asuscom.de/de/support (for online support)
Web Site: www.asuscom.de
ix
P4S533-MX specifications summary
CPU
Chipset
Front Side Bus (FSB)
Memory
Expansion slots
VGA
IDE
Audio
LAN (optional)
Special features
Rear panel I/O
Internal I/O
(continued on the next page)
Socket 478 for Intel
Pentium
4/Celeron
On-die 512KB/256KB L2 cache with full speed
Supports Intel
651
SiS
962L
533/400 MHz
2 x 184-pin DIMM sockets support for PC2700/2100/PC1600
non-ECC DDR DIMMs for up to 2GB memory
2 x 168-pin DIMM sockets support for PC133/PC100
non-ECC SDRAM DIMM for up to 2GB memory
1 x AGP 4X (1.5V only)
3 x PCI
Integrated 3D graphics controller in SiS 651 chipset
2 x UltraDMA 133/100/66/33 connectors
ADI AD1980 6-channel CODEC
SiS
P4S533-MX motherboard!
The ASUS
P4S533-MX motherboard delivers a host of new features and latest
technologies making it another standout in the long line of ASUS quality
motherboards!
The motherboard incorporates the Intel
Pentium
4 Processor in 478-pin package
coupled with the SiS
651 chipset to set a new benchmark for a cost-effective
desktop platform solution.
Supporting up to 2GB of system memory with the PC2700/2100/1600 DDR DIMMs
or the PC133/PC100 SDRAM DIMMs, high-resolution graphics via an AGP 4X slot,
USB 2.0, and 6-channel audio features, the P4S533-MX is your affordable vehicle
to enter the world of computing!
Before you start installing the motherboard, and hardware devices on it, check the
items in your package with the list below.
1.2 Package contents
Check your P4S533-MX package for the following items.
ASUS P4S533-MX motherboard
ATX form factor: 9.6 in x 9.6 in (24.5 cm x 24.5 cm)
ASUS P4S533-MX series support CD
80-conductor UltraDMA/66/100 IDE cable
Ribbon cable for a 3.5-inch floppy drive
I/O shield
Bag of extra jumper caps
User Guide
9-pin COM cable
If any of the above items is damaged or missing, contact your retailer.
ASUS P4S533-MX motherboard user guide 1-3
1.3 Motherboard components
Before you install the motherboard, learn about its major components and
available features to facilitate the installation and future upgrades. Refer to the
succeeding pages for the component descriptions.
3 4
13
15
1
16
12
2
7
10
8
5 6
9 14
11
17
27 24
20
21
22
23
18 19
25 26
1-4 Chapter 1: Product introduction
ATX 12V connector. This power connector connects the 4-pin 12V plug from
the ATX 12V power supply.
North bridge controller. This SiS651 controller integrates a high
performance host interface for the Intel Pentium 4 processor, a memory
controller and SiS MuTIOL technology.
CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for
the Intel
Pentium
Pentium
4 Processor via a
478-pin surface mount ZIF socket. The Pentium 4 processor with 512KB L2 cache on
0.13 micron process includes a 533/400 MHz system bus and features the new
Hyper-Threading technology and FMB2 power design that allow up to 3.0+ GHz
core frequencies for up to 4.2GB/s data transfer rates.
SDRAM and DDRAM Combo
P4S533-MX has two DDR sockets and two SDR sockets that support up to 2GB
non-ECC PC2700/2100/PC1600 or PC133/PC100 SDRAM DIMMs.
ASUS EZ Flash
With ASUS EZ Flash, you can update BIOS before entering operating system. No
more DOS-based flash utility and bootable diskette required.
C.P.R. (CPU Parameter Recall)
When the system hangs due to overclocking failure, there is no need to open the
case to clear the CMOS data. Simply restart the system and the BIOS will
automatically restore the CPU default setting for each parameter.
CrashFree BIOS
CrashFree BIOS allows users to restore BIOS data from a floppy diskette even
when BIOS code and data are corrupted during upgrade or invaded by a virus.
Unlike other competing vendors products, ASUS motherboards now enable users
to enjoy this protection feature without the need to pay for an optional ROM.
Powerful Integrated Graphics
The P4S533-MX delivers powerful integrated 2D and 3D graphics performance for
functionality and value.
SoundMAX Digital Audio System
The SoundMax Digital Audio System is the industrys highest performance and
most reliable audio solution for business professionals, audiophiles, musicians,
and gamers. SoundMAX Digital Audio System can output 5.1 channel surround
and features state-of-the-art DLS2 MIDI synthesizer with Yamaha DLSbyXG sound
set, 5.1 Virtual Theater and supports all major game audio technologies
including Microsoft DirectX8.0, Microsoft DirectSound 3D, A3D, MacroFX,
ZoomFX, MultiDrive 5.1 and EAX.
(page 1-12)
(page 2-2)
(page 1-15)
(page 2-7)
(page 3-3)
(page 1-10)
ASUS P4S533-MX motherboard user guide 1-7
1.5 Motherboard layout
FLOPPY1
PANEL1
CD1
CHA_FAN1
SiS651
HOST/
Memory
Controller
AUX1
P4S533-MX
GAME1
FP_AUDIO1
S
u
p
e
r
I
/
O
2Mbit
Flash
BIOS
PCI Slot 1
S
E
C
_
I
D
E
1
Accelerated Graphics Port
(AGP)
USBPWR_34
SiS962L
MuTLOL
Media
I/0
ATX12V1
CPU_FAN1
2
4
.
4
c
m
(
9
.
6
i
n
)
P
R
I
_
I
D
E
1
SB_PWR1
USBPWR_56
USB_56
COM1
S
o
c
k
e
t
4
7
8
PCI Slot 2
PCI Slot 3
PS/2KBMS
T: Mouse
B: Keyboard
P
A
R
A
L
L
E
L
P
O
R
T
VGA1
Below:Mic In
Center:Line Out
Top:Line In
RJ-45
Top:
USB3
USB4
Bottom:
USB20_12
ATX Power Connector
D
I
M
M
S
o
c
k
e
t
1
(
6
4
/
7
2
-
b
i
t
,
1
6
8
-
p
i
n
m
o
d
u
l
e
)
2 3
D
I
M
M
S
o
c
k
e
t
1
(
6
4
/
7
2
-
b
i
t
,
1
6
8
-
p
i
n
m
o
d
u
l
e
)
0 1
D
D
R
D
I
M
M
2
(
6
4
/
7
2
b
i
t
,
1
8
4
-
p
i
n
m
o
d
u
l
e
)
2 3
D
D
R
D
I
M
M
1
(
6
4
/
7
2
b
i
t
,
1
8
4
-
p
i
n
m
o
d
u
l
e
)
0 1
USBPWR_12
Audio
Codec
CLRTC1
CR2032 3V
Lithium Cell
CMOS Power
SPDIF1
MDC1
24.4cm (9.6in)
1-8 Chapter 1: Product introduction
1.6 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
3. Hold components by the edges to avoid touching the ICs on them.
4. Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
5. Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
When lit, the green LED (SB_PWR1) indicates that the system is ON, in sleep
mode, or in soft-off mode, a reminder that you should shut down the system and
unplug the power cable before removing or plugging in any motherboard
component.
Install only 1.5V AGP cards on this motherboard!
P4S533-MX
Pentium
Hyper-Threading Technology
To use the Hyper-Threading Technology on this motherboard:
1. Buy an Intel Pentium 4 CPU that supports Hyper-Threading Technology. Install
the CPU.
2. Power up the system and enter BIOS Setup (see Chapter 2). Under the Boot
Menu, make sure that the item Hyper-Threading Technology is set to
Enabled. The item appears only if you installed a CPU that supports Hyper-
Threading Techonology.
3. Reboot the computer.
1. This motherboard supports Intel Pentium 4 CPUs with Hyper-Threading
Technology. (since PCB R2.00 or later versions)
2. Hyper-Threading Technology is supported under Windows XP and Linux
2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading
compliler to compile the code. If you are using any other operating systems,
disable the Hyper-Threading Techonology item in BIOS to ensure system
stability and performance.
3. It is recommended that you install WinXP Service Pack 1.
4. Make sure to enable the Hyper-Threading Technology item in BIOS before
installing a supported operating system.
5. For more information on Hyper-Threading Technology, visit www.intel.com/
info/hyperthreading.
ASUS P4S533-MX motherboard user guide 1-11
1.8.2 Installing the CPU
Follow these steps to install a CPU.
1. Locate the 478-pin ZIF socket on the motherboard.
2. Unlock the socket by pressing the
lever sideways, then lift it up to a 90-
100angle.
3. Position the CPU above the socket
such that its marked corner matches
the base of the socket lever.
4. Carefully insert the CPU into the
socket until it fits in place.
5. When the CPU is in place, push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Socket Lever
90 - 100
Gold Mark
6. Install a CPU heatsink and fan
following the instructions that came
with the heatsink package.
7. Connect the CPU fan cable to the
CPU_FAN1 connector on the
motherboard.
The CPU fits only in one correct orientation. DO NOT force the CPU into the
socket to prevent bending the pins and damaging the CPU!
Make sure that the socket lever is lifted
up to 90-100angle, otherwise the
CPU does not fit in completely.
1-12 Chapter 1: Product introduction
1.9 System memory
The motherboard has two Double Data Rate (DDR) DIMM sockets and two Single
Data Rate (SDR) DIMM sockets that supports up to 2GB non-ECC PC2700/2100/
1600 DDR or PC133/100 SDRAM DIMMs.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it has a
184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a DDR DIMM is
single notched while an SDR DIMM is double notched.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
Unlocked Retaining Clip
DDR DIMM notch
1. Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to
the motherboard and other system components.
2. DDR and SDRAM memory slots cannot be used simultaneously.
P4S533-MX