Escolar Documentos
Profissional Documentos
Cultura Documentos
sectors. Our product range includes pre-fabricated huts and shelters, pre-engineered steel buildings, cold roll formed metal sections, and roofing and wall cladding solutions among others. We strive to provide complete structural solutions under one roof. We have in-house facility for cold rolled forming for making Z, C, U, W, L, T and pressed steel door and window sections and for profiling of sheets for roofing, wall-cladding, flashing, girts, ridge etc. We have a full fledged work shop for manufacturing columns, pillars, rafters, trusses and various other parts for pre-engineered buildings, portal truss systems and pre-fabricated huts. Our promoters MTI have been engaged in manufacture and supplies to the prestigious defence and paramilitary forces of the country for the last two decades. Some of our most valued customers include esteemed government bodies like Border Security Force, Central Industrial Security Force, Assam Rifles and Eastern Command. They have been supplying complete structural solutions to these bodies for many years now.
Select Clientele Continental Engines, Gurgaon Gayatri Automation, Alwar Shiv Shakti Minerals, Alwar Shape Engineering Co., Haridwar Jai Ganesh Engineering, Haridwar Anchor Panasonic, Roorkee Victora Auto Pvt. Ltd., Haridwar Oberoi Motors, Roorkee/Haridwar/Dehradun Jay Ace Technologies, Roorkee Recliners India Ltd., Roorkee Naulakha Surfactants, Roorkee Era Infras Haridwar - Dehradun Highway Project Dabur Research & Training Centre, Rudrapur TTK Prestige Co., Roorkee PG International, Roorkee Osho Packaging, Roorkee Himadri Chemicals, Kolkatta SKN Bentex, Roorkee Apple Formulations, Roorkee Bentex Control & Switch Gear, Roorkee Spectro Research Lab Ventures, Kanpur Nanda and Nanda Associates, Haridwar
----------------------------------------------------------------------------------------------------------------------------
Pre-engineered Buildings at UIL Pre-engineered buildings have become the choice of construction in the industrial sector. They take one-third time in setting up as compared to conventional construction and offer far more flexibility in design and construction. At UIL, our team of experts is engaged in design, fabrication & erection of world class preengineered buildings. Highest quality standards are ensured in procurement of steel and utmost care is taken in ensuring structural strength and soundness.
The U I L Advantage
----------------------------------------------------------------------------------------------------------------------------
Select Projects
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
Primary Members
Primary members consisting of columns and rafters are the main load carrying members of the structural system. They are also called Built-Up Members and are usually an "I" shape, made from individual flat plates welded together. High strength HR Plates are used in their fabrication. Built up sections are made from these plates in automatic beam welding line by submerged Arc welding (SAW). Specification Conformance: ASTM A572M
Secondary Members
Secondary structural members are used to support the wall and roof panels and consist of purlins, girts, eave struts, flange brace etc. They share part of the longitudinal loads that are applied on the building such as wind and earthquake loads. They also provide lateral bracing to the compression flanges of the main frame members thereby increasing frame capacity.
Purlins and girts are cold rolled formed light gage Z sections varying in depth from 180 to 300 mm and in thickness from 1.5 mm to 2.5 mm as per design requirements. All primary connection fasteners will be with high strength bolts conforming to the physical specification to ASTM A570M and IS: 2062
----------------------------------------------------------------------------------------------------------------------------
Design Choices Clear Span: Maximum practical width = 80 m Multiple Gable: Maximum practical module width = 80 m
For multi-level buildings, an intermediate mezzanine floor is included in our design. It consists of columns, beams, joists, deck panels and edge trims to receive reinforced concrete.
Steel Staircase
Mezzanine Floor
----------------------------------------------------------------------------------------------------------------------------
Decking Sheet for Mezzanine Floor Mezzanine deck panel is intended to carry only the dead load of the wet concrete; it acts as a permanent shuttering.
----------------------------------------------------------------------------------------------------------------------------
Crane beam to support an overhead or under hung bridge crane is part of many of our steel buildings. Brackets for structural support are welded to the primary building frame to permit attachment of the crane beam. Crane rails, beam hoist and bridge are excluded from our supply.
Under-hung Crane
Monorail Crane
For roofing and wall cladding, superior quality metal sheets are used. Our sheets are 26G TCT Hi Rib of 550 MPA Steel. Our sheeting solutions ensure high strength, better over lap, weather tightness, corrosion resistance, low maintenance cost and good aesthetics. Options available:
o o o o
Bare Galvalume Sheets Pre-painted Galvalume (PPGL) Sheets Pre-painted Galvanized (PPGI) Sheets PUF Insulated Panels
Galvalume steel is a zinc aluminum coated steel offering high corrosion resistance. This alloy coating com comprises of 55% aluminum 43% zinc and 1.5% silicon. This Coating offers a superior barrio protection against varied atmospheric conditions. The coating class is AZ-150 as per AS : 1397, which means 150gms/m2 minimum coating mass total of both sides. Galvalume sheets are available in tensile strengths of 300, 345 & 550 MPa Galvanized steel comprises of galvanized zinc coating over mild steel of minimum coating mass 120 gms / m2 as per IS 277 and IS 14246 in tensile strength of min. 240 MPa. PUF Insulated Panels The outer and inner metal skins of Insulated Panels conform to the same specifications as above. In addition, Insulated Panels have factory injected polyurethane foam (PUF) for thermal insulation.
Canopies and roof extensions are part of many PEB designs. They enhance utility as well as aesthetic value of the building. They are made using hot rolled or built-up members. They are beyond the steel lines of the building and located below the eave.
One of the most essential accessories in any PEB design gutters and down spout pipes ensure movement of water over the building surface. They are produced from the same material as wall and roof sheeting.
Wall Trimmings including corner trim, eave trim, gable trim etc. are produced from the same material as wall and roof sheeting:
Ridge Vent
We offer the option of ventilation at the ridge line through the use of a Ridge vent.
----------------------------------------------------------------------------------------------------------------------------
Contact Us
Head Office: 58/74-76, Birhana Road, Kanpur. Works: Khasra No. 138, Raipur, Bhagwanpur, Roorkee. Contact no.: +91 98390 35937 Email: mti@udhavind.com For more information on us, please visit our website www.udhavind.com
Select Products