Escolar Documentos
Profissional Documentos
Cultura Documentos
ST-System
>> Fittings for diameters up to and including DN2800 >>
Nowadays more and more water and gas pipe networks are extended or replaced by plastic piping systems. Due to this trend you have to deal with major differences in outside pipe diameters. In many cases this makes it impossible to use standard wide range fittings. Are you looking for a reliable and durable solution that can easily and efficiently connect all these different large diameter pipes? We have the answer for you. With the ST-System a tailor made solution for all pipe outside diameters DN40 DN2800 is provided.
For non standard sizes
The ST-System is a dedicated system, especially developed for non standard sizes. Small or large, the fittings are suitable for all diameters between DN40 DN2800. The ST-System can be used for various materials such as PE, PVC, steel, asbestos cement and (ductile) cast iron.
Fields of application
Water transport lines Water distribution lines Gas distribution lines Wastewater transport lines Maintenance & repair Pumping stations Desalination installations Industrial applications
Your benefits
Tailor made solution, suitable for any pipe outside diameter DN40 DN2800 Quick, simple and safe installation Durable corrosion protected fitting by Resicoat epoxy powder coating Very large insertion depth for an easy installation, which can also be used as a disassembly piece Reusable For above and below ground applications
Easy to install
The ST-System series are available in the pressure classes PN10, PN16 and PN25. Thanks to the large insertion depth of 300mm, the installation of the ST-System fitting is very easy. This very long build in length is standard for all sizes and types. The fitting can also be used as a dismantling joint. Longer fittings or other configurations, are possible. Please contact us for more details.
DN (mm)
DN40 DN100 DN250 DN600 DN1200 DN1600 DN80 DN200 DN500 DN1100 DN1600 DN2800
range (mm)
+2 +2 +4 +5 + 5,5 on request -1 - 1,5 -3 -4 -5
Gasket
Insert stiffener
Body Steel ST-37-2, (S-235JRG2) DIN/EN 17100.
In case of a mechanical connection on PE or PVC pipes, always use an insert stiffener.
Clamp ring
Coating
Resicoat epoxy powder coating, type RT 9000 R4, meets the requirements of ACS, Belgaqua, KTW, NSF Standard 61, WRAS, KIWA for use in potable water lines. Colour red (RAL 3003). Minimum layer thickness 250 micron.
Rubber gasket For water and gas: NBR in accordance with EN 682. Optional: EPDM, VITON. Working temperature -10C up to +50C.
Bolts and nuts Stainless steel A2 (304). Optional: stainless steel A4 (316). Working pressure (PFA) Certificates For water: 10, 16 and 25 bar. For gas: 4 bar. Higher pressures on request. KTW, DGS, BSI, WRC.
Design input
Fittings are available from DN40 up to and including DN2800 on request. For tailor made product design we request the following input data: Outside diameter in mm from both pipe ends Working pressure SDR class (in case of plastic pipe) Flange drilling pattern (PN10, PN16, ANSI, JIS, BS) Medium
Our solutions
MULTI/JOINT 3000
wide-range couplings restraint - non restraint DN50 - DN150 (2- 6)
Our expertise
Georg Fischer Waga N.V. is the jointing technology specialist, offering a complete range of products that have been used in the water & gas market for many years. No matter how complicated your connection problem is, we can offer you a solution.
MULTI/JOINT XL
wide-range couplings non restraint DN300 - DN600 (12- 24)
ST-System
dedicated couplings and flange adaptors with or without reduction DN50 - DN2800 (2- 112)
FGR
stainless steel couplings restraint - non restraint DN25 - DN2000 (1- 80)
Plast/Joint
mechanical connection for plastic pipes restraint - non restraint d63 - d315
Multi/Clamp
stainless steel repair clamps, tapping tees and saddles DN25 - DN1000 (1- 40)
Innovator and market leader in connection technology Extensive application know-how and know-why Decades of experience Long-term system solutions One stop shopping Local support worldwide Adding Quality to Peoples Lives
The technical data are not binding and not expressly warranted characteristics of the goods. They are subject to change. Please consult our General Conditions of Supply. WA2069/0810/NL Georg Fischer Waga N.V. 2010, printed in the Netherlands
Multi/Saddle Plus
wide-range tapping saddle with or without shut-off mechanism DN60 - DN300 (2 - 12)
Others
W400/W410 drilling device WAL/V leak clamp DN80 - DN1200 (3- 48) MULTI/JOINT PE adaptor
Local distributor
Georg Fischer Waga N.V. Lange Veenteweg 19, 8161 PA / P.O. box 290, 8160 AG Epe, Netherlands T +31 (0) 578 678 378 / F +31 (0) 578 620 848 waga.ps@georgfischer.com / www.waga.nl