Escolar Documentos
Profissional Documentos
Cultura Documentos
4530
Applications:
The submersible 4530 mixer is used for high-efficiency mixing of wastewater and sludge containing solids and fibers, in municipal and industrial applications. Ideally suited to anoxic and anaerobic treatment steps, it is also used for MBBR, blending, flocculation and de-icing in other applications. The mixer is equipped with three blade propeller and reduction gear and designed to be operated completely immersed in the liquid. Available in standard and explosion-proof versions.
5. Oil casing An environmentally friendly white paraffin based, FDA approved non-toxic, oil lubricates and cools the seals between the liquid and the gearbox. Pressure build-up within the oil casing is reduced by means of a built-in air volume. 6. Bearings The motor shaft is supported by an inner single-row deep-groove ball bearing and an outer double-row roller bearing. The intermediate shaft is supported by two double-row roller bearings. The propeller shaft is supported by an inner single-row deep-groove ball bearing and an outer double-row angular contact ball bearing. All bearings are designed for more than 50,000 hours of operation. 7. Shaft seals The mixer has one corrosion resistant cemented carbide WCCR / WCCR mechanical seal and one lip seal. 8. Shafts The motor is delivered with the rotor as an integral part. Shaft material is stainless steel, ASTM/AISI 431. The shafts are completely sealed and will not come into contact with the mixed media. 9. Propeller The propeller is non-clogging and designed with three generous back swept propeller blades. It is designed to deliver the greatest possible mixing effect in relation to motor output. The propeller blade is made of epoxy coated aluminum. The propeller shaft is constructed of 431 stainless steel.
2 1
4 6
6 10 3 8 6 8 7 9
10. Monitoring system The stator incorporates three thermal switches, connected in series. The thermal switches open at 125C (257F). Optional stator housing leakage sensor (FLS) available.
Materials of Construction:
Major castings: Cast Iron ASTM A48 Class 35B Propeller: Epoxy coated Aluminum Shafts: ASTM/AISI 431 Stainless Steel Flygt products are affiliated with the following associations:
Approvals:
CSA tested and approved to UL Standard for Safety #778. Factory Mutual Research tested and approved. Suitable for use in: Class I Div 1 groups C and D Class II Div 1 groups E; F and G Class III Div 1 Hazardous locations
4530
47-1/4
47-1/4
WEIGHT (LBS.) TOTAL 460
3 3
Poles 4 4
*Horsepower consumed at the motor shaft between motor and gear in clear water.
Motor Data
Rated Output Power HP (kW) 3.5(2.6) 3 Full Locked Load Rotor Amps Amps 11.0 5.1 3.9 17.0 8.2 6.5 83.0 41.0 29.0 83.0 39.0 29.0 Locked Rotor KVA 33.1 32.7 28.9 33.1 32.7 28.9 NEC Rated Code Input Power Letter (kW) Poles/RPM L L K F F E 3.1 3.1 3.0 5.5 5.5 5.6 4/1765 4/1765 4/1760 4/1765 4/1730 4/1720 Cable Max. Part Cable Number Length (FT.) 94 20 59 94 20 59 94 20 59 94 20 59 94 20 59 94 20 59 150 640 1,045 85 350 555
6.2(4.6)
Efficiency (460v) HP 3.5 6.2 100% Load 85.5 84.0 75% Load 84.0 85.5 50% Load 80.5 85.0 100% Load 0.74 0.84
Power Factor 75% Load 0.66 0.80 50% Load 0.53 0.70
Xylem Inc., Flygt products, reserves the right to modify performance, specifications or design without notice. Xylem Inc., U.S.A. Flygt/WEDECO products, 14125 South Bridge Circle, Charlotte, NC 28273. Tel. (704) 409-9700 Fax.(704) 295-9080 Leopold, 227 S. Division Street Zelienople, PA 16063 Tel (724) 452-6300 Fax (724) 452-1377, Sanitaire, 9333 N. 49th Street Brown Deer, WI 53223-1472 Tel (414) 365-2200 Fax (414) 365-2210.
4530
Copyright 2012
Printed in U.S.A.