Escolar Documentos
Profissional Documentos
Cultura Documentos
Table of Contents
CONVENTIONS ......................................................................................................................... III INSTALLATION INSTRUCTIONS FOR WINDOWS ........................................................... 3
DVD CONTENTS ........................................................................................................................................................3 INSTALLING UGDOC .................................................................................................................................................3
NX 8.0
Conventions
All references to "Windows" in this manual refer to (32 or 64-bit) versions of Windows XP, Windows Vista and Windows 7. The old UGS company name was replaced with Siemens PLM Software, however, some programs names, folder names and the product kit name may still retain the UGS name. Windows menu items and commands will be written in bold letters. When presenting a series of choices from a Windows pull-down menu, an arrow will be used to represent the series of submenus, (e.g., StartProgramsAccessoriesWindows Explorer). If you do not have the Symbol font installed, or you browse this document on a nonWindows computer, you may see the registered trademark symbol () in place of the arrows.
NX 8.0
NX 8.0
DVD Contents
README UGDOC_README Win32\UGDOC080 Win64\UGDOC080 Text file containing further information about this media. Text file containing supplemental information about documentation. NX 8.0 Documentation kit for Windows (32-bit XP, Vista, Windows7) NX 8.0 Documentation kit for Windows (64-bit XP, Vista, Windows7)
The contents of the Win64 kit are exactly the same as the contents of the Win32 kit, except for the installation itself which has been optimized for Windows 64-bit. Note This documentation product contains a very large number of small HTML files. This particular type of payload is very slow to install and deinstall on Microsoft systems. The sections below on Automatic Installation and Uninstalling UGDOC contain tips on expediting the installation or deinstallation. Note The documentation content has been divided into on-line HELP and API Programmers reference. By default, the installation will only install HELP, thereby reducing footprint and installation time. A custom setup dialog allows selecting the API section for sites that wish to install the Programmers reference material.
Installing UGDOC
1. Log in as Administrator. 2. Place the UGDOC media in your DVD reader. When the DVD mounts, it will automatically run the launch program. Note If this "autorun" feature is turned off for your DVD drive, please follow the instructions in the next two steps to start the launch program.
3. Click on Start ProgramsAccessories Windows Explorer, and then click on the icon for your DVD drive. 4. Double click on the program launch.exe in the top level folder. 5. Select the install button for the appropriate Windows platform.
NX 8.0
NX 8.0
6. The installation will prompt you for the appropriate installation information. Note The documentation is divided into NX_HELP and NX_API (Programmers) sections. A custom setup dialog provides the option to add the NX_API selection to the installation. The default install only install NX_HELP.
Note NX 8.0 Documentation requires Microsoft Internet Explorer as the default browser, V7.0 or higher.
NX 8.0
NX 8.0
The configurable properties for the UGDOC installation are: INSTALLDIR this property sets the directory where UGDOC will be installed. If not specified this will default to the installed directory for NX 8.0. This property is documented for completeness, but it is not recommended that this property be set. It is recommended to allow the installation to use the default NX installation directory. Note The INSTALLDIR command line property is always overridden by the Registry Key: HKLM\Software\Unigraphics Solutions\NX 8.0\INSTALLDIR that is placed in the Registry by the NX installation. The INSTALLDIR property is only effective on installations that do NOT have NX 8 installed. Caution The msiexec.exe examples below may appear on multiple lines because of document formatting but they must be entered on your computer as one line. Arguments with embedded spaces must be quoted. The following is an example of a silent installation of UGDOC. By default, it will install UGDOC (HELP only no API) in the default installation directory (wherever NX 8.0 is installed). The /qn+ switch will cause an ending message dialog to appear. No other dialogs will appear. msiexec.exe /qn+ /i "Siemens NX 8.0 Documentation.msi" The default example above will only install the NX_HELP section of the UGDOC content. To install both NX_HELP and the NX_API Programmers reference use: msiexec.exe /qn+ /i "Siemens NX 8.0 Documentation.msi" ADDLOCAL=all The following is an example that shows a UGDOC installation in a user-specified directory. The /qn+ switch will cause an ending message dialog to appear. No other dialogs will appear. msiexec.exe /qn+ /i "Siemens NX 8.0 Documentation.msi" INSTALLDIR="E:\Program Files\MyInstalls" To install both NX_HELP and NX_API use: msiexec.exe /qn+ /i "Siemens NX 8.0 Documentation.msi" INSTALLDIR="E:\Program Files\MyInstalls" ADDLOCAL=all Note Installing UGDOC in a folder other than the top level of the NX 8.0 folder (i.e. %UGII_BASE_DIR%) is not recommended because the NX 8.0 Context Sensitive Help will not be able to locate the documentation unless you also change the UGII_CSHELP_HTML_DOCS and UGII_CSHELP_DOCS environment variables. This option is primarily available for installers that wish to establish a standalone document server. Also, if NX 8.0 is installed on this system, INSTALLDIR is always overridden by the NX 8.0 Registry key for INSTALLDIR.
NX 8.0 Installation Instruction for Windows 5
NX 8.0
The following example shows a verbose (*v) log file generated to c:\temp\install.log. The /qn switch will cause no dialogs to appear. If you use the /qn switch with no + sign, you must use Task Manager to monitor the msiexec.exe as there will be no indication when the installation completes. This example shows a default installation of NX_HELP only. msiexec.exe /qn /L*v c:\temp\install.log /i "Siemens NX 8.0 Documentation.msi This example shows installation of both NX_HELP and NX_API. msiexec.exe /qn /L*v c:\temp\install.log /i "Siemens NX 8.0 Documentation.msi ADDLOCAL=all The following example shows a deinstallation of UGDOC. Only an ending dialogue will appear. msiexec.exe /qn+ /x "Siemens NX 8.0 Documentation.msi"
NX 8.0
NX 8.0
Uninstalling UGDOC
To remove UGDOC, run the setup and select Remove or use the Windows Add/Remove utility and select: StartSettingsControl PanelAdd/Remove ProgramsSiemens NX 8.0 Documentation You may also use the msiexec silent installation option /x to uninstall UGDOC e.g.:
msiexec.exe /qn+ /x "Siemens NX 8.0 Documentation.msi"
Note Uninstallation tip - The UGDOC kit contains many thousands of files, consequently it may take a long time for MSI to uninstall all these files and remove registry entries. Experienced administrators may use the following steps for the quickest possible deinstallation: Rename or remove the installed ugdoc folder manually. Rename or remove the shortcut: C:\Documents and Settings\All Users\Start Menu\Programs\Siemens NX 8.0\NX 8.0 Documentation. Use msiexec /qn+ /x "Siemens NX 8.0 Documentation.msi"
NX 8.0