Escolar Documentos
Profissional Documentos
Cultura Documentos
Sizes ENTER DATA IN CYAN BOXES 1) Duct Size Calculation for Available Spiral
CFM FRICTION LOSS PER 100' OF DUCT HYDRAULIC DIAMETER INCHES AVAILABLE SPIRAL DIAMETER INCHES VELOCITY (AVAILABLE DIAMETER) FPM 20000 INSERT DATA 0.1 INSERT DATA 43.20 44 1895
6) User Defined Rectangle to Available Oval Spiral Using Rectangle Data in No. 5 Above
CALCULATED HYRAULIC DIAMETER INCHES DESIRED DEPTH (MINOR AXIS) AVAILABLE WIDTH INCHES (MAJOR AXIS) 42.88 FROM No. 5 ABOVE 24 INSERT DATA 71.12
A result of 0 or #N/A indicates that an appropriate spiral size is not available Calculation are based on STP and an absolute roughness factor of .0003 ft. SPIDA, does not warrant the information in the Spiral Duct Size Calculator (SDSC) to be free of errors. The SDSC is provided as is without warranty of any kind, either expressed or implied. The entire risk as to the quality and performance of the SDSC and data is with you. In no event will SPIDA, its board of directors or the developer of the SDSC be liable to you for any damages, including without limitation any lost profits, lost savings or other incidental or consequential damages arising out of the use or inability to
SPIDA, does not warrant the information in the Spiral Duct Size Calculator (SDSC) to be free of errors. The SDSC is provided as is without warranty of any kind, either expressed or implied. The entire risk as to the quality and performance of the SDSC and data is with you. In no event will SPIDA, its board of directors or the developer of the SDSC be liable to you for any damages, including without limitation any lost profits, lost savings or other incidental or consequential damages arising out of the use or inability to use the SDSC and data.