Escolar Documentos
Profissional Documentos
Cultura Documentos
173
Chapter
13. Press Enter. The phasing index (followed by an asterisk) will move up to the top line of the display. 14. Press Scroll or Scroll to increase or decrease the phasing index, then press Enter to activate the value as it prints. Continue to increase or decrease the phasing index until the pattern of Hs appears as shown below:
Needs Adjustment
Correct
Needs Adjustment
15. When the print pattern is acceptable, press Stop. Printing stops, and the printer automatically enters the current phase index value into NVRAM. The display shows NOT READY. 16. Press Scroll + Scroll to lock the Enter key. 17. Close the printer cover. Press Start to put the printer into READY mode. NOTE: If you changed the phasing value, power down the printer, remove the shuttle cover, and write the new phase value on the aluminum shuttle casting.
174