Escolar Documentos
Profissional Documentos
Cultura Documentos
SD4
Features
Simple, compact designed, this valve is only one section for open centre and closed centre hydraulic systems. H Fitted with a main pressure relief valve. H Diameter 16 mm -- 0.63 in interchangeable spools. H Available manual and remote with flexible cables spool control kits.
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40C temperature.
Nominal flow rating Operating pressure (maximum) Back pressure (maximum) Internal leakage A(B)T Fluid Fluid temperature Viscosity with NBR (BUNA-N) seals with FPM (VITON) seals operating range min. max. Max level of contamination Ambient temperature NOTE -- For different conditions please contact Customer Service. on outlet port T Dp=100 bar - 1450 psi fluid and valve at 40C - 104F
45 l/min 250 bar 25 bar 3 cm3/min Mineral base oil from --20 to 80C from --20 to 100C from 15 to 75 mm2/s 12 mm2/s mm2/s 400 from 15 to 75 cSt 12 cSt 400 cSt 3600 psi 260 psi 0.18 in 3/min
Additional information This catalogue shows the product in the most usual configurations. Please contact Customer Service Dpt. for more detailled information or special request. WARNING! All specifications of this catalogue refers to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT.
5th edition January 2000: This edition supercedes all prior documents.
DAC002E
SD4
Dimensional data
Production batch : P99 = production year (1999) 00001 = progressive number Valve code
55 2.17
31 1.22
92 3.62 46 1.81
37 1.46
40 1.57
40 1.57
28 1.10
11 0.43
37 1.46
70 2.76
8.2 0.32
44 1.73
20 0.79
23 0.91
30 1.18
M8
20 0.79
85.5 3.37
Standard threads
PORT Inlet P A and B ports Outlet T G 3/8 BSP
(ISO228/1)
SAE UN-UNF SAE 8 (3/4--16 UNF) SAE 6 (9/16--18 UNF) SAE 8 (3/4--16 UNF)
METRIC
(ISO 262)
M18x1.5
DAC002E
SD4
Hydraulic circuit
Standard valve is supplied with positive overlap spool (1CP). AB
120 1750
Ex.: SD4/1(KG3--120)/1CP8L
Right inlet
A simmetrical body allows the reverse assembly of spool and relative control kit and lever (ED configuration).
BA
120 1750
DAC002E
SD4
Performance data Open centre
From inlet to outlet.
10 (bar) 8 Pressure drop (psi) 100
A P B T
6 4 2 0 0 15 30 Flow 45 60 (l/min)
50
A P B T
6 4 2 0 0 15 30 Flow 45 60 (l/min)
50
A P B T
6 4 2 0 0 15 30 Flow 45 60 (l/min)
50
SD4
Ordering codes Example: SD4 / 1 (KG3-120) / 1CP 8 L 1. 2. 3. 4. 5. *
4. 1.
TYPE 1
Body kits *
CODE 5KC1113000 DESCRIPTION 1 section
2.
9-10
TYPE CODE DESCRIPTION VMD5/1 direct pressure relief valve type K (standard) (KG2- 80) 5KIT105122 Range 40 to 80 bar / 580 to 1150 psi standard setting 80 bar / 1150 psi (KG3- 120) 5KIT105123 Range 63 to 200 bar / 900 to 2900 psi standard setting 120 bar / 1750 psi (KG4- 220) 5KIT105124 Range 160 to 250 bar / 2300 to 3600 psi standard setting 220 bar / 3200 psi VMD5/1 direct pressure relief valve type Y (YG2- 80) 5KIT105212 Range 63 to 160 bar / 900 to 2300 psi standard setting 80 bar / 1150 psi (YG3- 175) 5KIT105213 Range 125 to 250 bar / 1800 to 3600 psi standard setting 175 bar / 2500 psi Standard setting is referred to 10 l/min flow. SV XTAP623282 Relief blanking plug
11-12 15-16
17
1.
3.
TYPE 1CP 1N 2 3 4 6 7
Spool options
CODE 3CU1110110 3CU1110120 3CU1125130 3CU1131130 3CU1135140 3CU1150130 3CU1155130 CIRCUIT DESCRIPTION Double acting with positive overlap, 3 positions, A and B closed in neutral position Double acting, 3 positions, A and B closed in neutral position, negative overlap Double acting, 3 positions, with A open to tank in neutral position Single acting on A, 3 positions, B plugged; requires G3/8 plug (see part I ) Single acting on B, 3 positions, A plugged requires G3/8 plug (see part I ) Double acting, 3 positions, closed center Double acting, 3 positions, closed center with A and B to tank in neutral position
2.
18 K
SV
SD4
Ordering codes
II
5.
4.
TYPE 8 9 10 11 12 15 16 17 18
5.
LEB
TYPE L LEB SLP TP
B side options
CODE 5LEV105000 5LEV605000 5COP105000 5TEL105005 DESCRIPTION Standard lever box Safety lever with handlever, detent in 3 positions Without lever, with dust proof plate Cable connection
3.
SLP
I
TYPE G3/8
Port plug *
CODE 3XTAP722160 DESCRIPTION Plug for single acting spool
II
Optional handlever
CODE 170011012 DESCRIPTION Standard handlever L= 120mm/4.72in
TYPE AL01/M8x120
TP
SD4
Spools options
1
0
A B
0
A B
0
A
1CP
P T
P T
P T B port plugged
0
B
0
A B
0
A B
P T A port plugged
P T
P T
40 1.57
44.5 1.75
49 1.93
8 11 12 15 16 18
10 17
DAC002E
SD4
Special configurations Directional valve with rotary control kit
92 3.62 57.5 2.26 55 2.17
37.5 1.48
96 3.78
-5.5 - 0.21
6.5 0.26
33 1.30
+5.5 +0.21
Stroke
AB
120 1750
DAC002E
24.2 0.95
SD4
Special configurations Fixed single acting kick- out spool control
Detent in position 1.
92 3.62 55 2.17
71.5 2.81
AB Operating features
Kick-out pressure range . . . : from 63 to 100 bar : from 914 to 1450 psi Kick-out standard pressure . : 80 bar / 1160 psi
120 1750
10
DAC002E
SD4
Installation and maintenance
The SD4 valve is assembled and tested as per the technical specification of this catalogue. Before the final installation on your equipment, follow the below recommendations: ---the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat surface; in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve; prior to painting, ensure plastic port plugs are tightly in place.
A B T
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface finish. The manufacturer shall be consulted.
DAC002E
11
WALVOIL S.P.A. 42100 REGGIO EMILIA ITALY VIA ADIGE, 13/D TEL. +39.0522.932411 FAX +39.0522.300984 E-MAIL: INFO@WALVOIL.COM HTTP: //WWW.WALVOIL.COM CUSTOMER SERVICE TEL. +39.0522.932555 FAX +39.0522.932455
D1409808I DAC002E