Escolar Documentos
Profissional Documentos
Cultura Documentos
PH Tool Reference Standards, headquartered in Telford, PA, has supplied the NDT industry with high quality Reference Standards and Test Blocks since its founding in 1973. Whether you need Calibration Blocks, Ultrasonic Test Blocks, EDM Notches, Flatbottom holes, or Micro-holes, PH Tool can handle your order. We are a family-managed business, begun by Phil Herman Sr., who now serves as Founder/Chief Technology Officer. Phil Herman Jr. joined the business in 1991 and serves as President/CEO. The entire staff is dedicated to the development and fabrication of the finest quality reference standards available today. Our growth and high degree of product acceptance can be attributed to our emphasis on quality, attention to detail and innovative approaches to meeting the reference standard needs of our valued customers. Our Reference Standards and Test Blocks are used in ultrasonic, eddy current, magnetic particle, liquid penetrant and radiographic testing. Reference Standards can be fabricated from customer-supplied pipe, tube, bar, plate or actual customer-supplied parts. We will supply the material to your specifications if needed. While our normal lead times are very short, Same-day, twenty-four hour and forty-eight hour RUSH service is available on many standards. Standard Test Blocks are available from stock in steel, stainless steel and aluminum for immediate shipment, and can be ordered anytime online at phtool.com or by calling us at 267-203-1600. Test Blocks in exotic alloys are also available including alloy steel, stainless steel, inconel, titanium, copper-nickel, NAB, monel, hastelloy and others. Specials can be fabricated to your design by our fully-equipped CNC machine shop. A walk through our immaculate 16,000 square foot facility will reveal a total of 15 sinker and wire EDMs, six CNC machining centers, ten surface grinders, a vast collection of metrology equipment, and countless other shop machines. All test blocks are permanently engraved with the block description, material and serial number. Customer artwork and logos can be laser engraved on our blocks. The QA Program at PH Tool meets all industry and government specifications. We are Nuclear Industry (NUPIC) and Navy approved and listed as the suggested vendor in several Alert Service Bulletins (ASB) including Bell Helicopter, Boeing and McDonnell Douglas. All Reference Standards and Test Blocks are delivered with an automated Certification Report providing NIST traceability. Replicas of EDM notches are archived at PH Tool and are available if needed. This catalog identifies all of the standard test blocks available as well as many of the popular EDM notch and Flat-bottom hole Reference Standards used in industry today. In addition, youll find information on other services including recertification of existing standards, manufacture of application-specific reference standards, and precision radius, angle and go/no-go gages. Throughout our history, PH Tool has earned an excellent reputation with its customers for supplying the best Reference Standards and Test Blocks available. Our manufacturing and technical support staffs are always prepared to assist the NDT engineer or technician with their reference standard needs. Meeting the demands of the increasingly complex and quality-conscious NDT marketplace is a challenge we gladly accept. We welcome your inquiries and look forward to serving you.
Contents
EDM Notch Information Sheet Nano Notch Information Sheet What is EDM?
Explanation of EDM and Advantages ...................................................... 1
3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6
14 14 14 14
Tech Scales
Tech Scales (Pack of 5)............................................................................. 16
21 21 21 21 21
Services Available
Sinker EDM.............................................................................................. Wire EDM ................................................................................................ CNC Machining of Standards .................................................................. CNC Milling............................................................................................. Turning and Boring .................................................................................. Surface Grinding ...................................................................................... Replication and Recertification to NIST .................................................. Welding and Cladding.............................................................................. Surface Roughness Measurement............................................................. Electrical Conductivity Measurement ...................................................... 24 24 24 24 24 25 25 25 25 25
Price Lists
Current Standard Test Block Price List.................................................... Current Dimensional Inspection Price List .............................................. 28 29
EDM
N O T C H E S
Since 1973.
PH Tool Reference Standards has been the recognized leader in the manufacture of EDM Notch standards used in the Non-Destructive Testing (NDT) industry. We are the only company that makes standards, and nothing but standards. As a result, our expertise is second-to-none, as is our commitment to producing the finest notch standards available today. Lets face it, without professionallymanufactured, NIST traceable standards, how reliable are the results of your inspection? In the quality conscious age were in, it is increasingly important to trust your critical masters to the company who can deliver on the promise of making the standards of excellence. welded components in the weld, toe, heat-affected zone, or base metal. A wide range of items can be notched including, but not limited to: tube, pipe, bar, plate, wire, rod, engine components, structural aircraft parts, automotive parts, pistons, turbine blades, impellors, disks, hubs, springs, and surgical implants.
NIST Traceability
All EDM Notch Reference Standards are 100% inspected, NIST traceable, and include a comprehensive certification report. At PH Tool our dimensions are carefully obtained via replication and observation using video measurement systems, and contain reliable/ repeatable dimensions traceable to the National Institute of Standards and Technology (NIST).
Industry Applications
Aerospace - Airline - Automotive - Manufacturing Medical - Military - Petrochemical - Power Generation Primary Metals - Research - Transportation
We believe that our success depends on ensuring the success of our customers by providing comprehensive, consistent quality in everything we do.
N A N O N O T C H E S
If there were a Guinness Book of World Records category for the narrowest EDM Notch ever made, PH Tool would be in it. Through our proprietary Sinker EDM process, we have developed a unique way to cut our Nano Notches smaller than ever thought possible. Nanos as small as 0.0006 inch (15 microns) wide have been successfully machined in our lab.
Industry Applications
Aerospace Airline Automotive Manufacturing Medical Military Petrochemical Power Generation Primary Metals Research Transportation
We believe that our success depends on ensuring the success of our customers by providing comprehensive, consistent quality in everything we do.
WHAT IS EDM?
Electrical Discharge Machining (EDM) is a nonconventional metal removal machining method that employs the use of an electrode to machine the desired shape into a workpiece under carefully controlled conditions. EDM offers several advantages over conventional, chip-making machining methods including: 1. 2. 3. 4. 5. The ability to machine extremely narrow notches. The ability to access hard-to-reach locations such as pipe/tube IDs without the need to section the workpiece. The ability to hold very close dimensional tolerances. The ability to machine harder materials and exotic alloys. The ability to machine irregular shapes not otherwise possible.
All conductive materials are able to be EDMd. EDM notches can be machined on both the OD and ID of pipe and tube. Notches can be machined on IDs as small as 0.040. Transverse (circumferential) notches are normally made with electrodes precisely ground to the respective radius of the workpiece. This ensures uniform notch depth along the notch length. Notches can also be made to match an irregular surface, or have a thumbnail (semi-elliptical) profile. The basic notch shapes available are detailed below. All notch shapes below can be longitudinally or circumferentially oriented, and can be located on the OD or ID of hollow cylindrical products.
Square Notch
This notch is also referred to as a Buttress notch, and has parallel-sided walls and minimal corner radius at notch bottom. Typical of notches over 0.010 wide. Available in depths from 0.0001; widths from 0.010; and lengths from 0.005 through 3.00.
U-Notch
w d
This notch has parallel-sided walls at the entry surface and a corner radius at notch bottom resembling a U-shape. Typical of notches under 0.010 wide. Available in depths from 0.0001; widths from 0.003; and lengths from 0.005 through 3.00.
V-Notch
a d
This notch has angled side walls that meet at the notch bottom. Typical V-notch included angles (a) are 40, 45, 60, 70, 75 and 90, with 60 being the most common. V-notch half-angle should complement beam angle for maximum response. Available in depths from 0.002, and lengths from 0.020 through 2.00.
w d
Nano Notch
The absolute narrowest notch available today. Available in widths from 0.0006, depths from 0.0001; lengths from 0.005 through 1.00. Some depth limitations exist on ultra-narrow notches depending on configuration and alloy. Call Technical Sales to discuss possibilities.
Tel: 267-203-1600
Fax: 267-203-1601
Flat-bottom hole
dia dp
The flat-bottom hole (FBH) is machined to have a flat reflecting surface at the hole bottom. The hole bottom is typically parallel to the beam entry surface, but can be machined at other desired angles. Primarily used in Ultrasonic testing, with some application in Eddy Current testing, FBHs can be machined just about anywhere they are needed for a particular inspection. Available in diameters from .010. ID FBHs can be machined without the need to section the part by our EDM process.
Side-drilled hole
dia dp
The side-drilled hole (SDH) is typically a drilled hole, the side wall of which is used as the reflecting surface. Unlike a FBH, the bottom of a SDH serves no purpose. SDHs are often reamed after initial drilling. SDHs are often drilled in pipe walls at specified locations from the diameter, e.g.: 1/4T, 1/2T, and 3/4T. They can be drilled either longitudinally or circumferentially to the axis of the pipe. They can also be machined in plate, bar or other products. Primary use is Ultrasonic testing. Available in diameters from .010.
dia
dp
Micro-sized hole
The micro-sized hole (MSH) is a small diameter hole used primarily in Liquid Penetrant inspection. Hole diameter is normally 0.004 to 0.005, and hole depth is 0.008 to 0.010. These micro-sized holes meet the requirements of the U.S. Navys NSTR-99 Rev. 2 (Qualification Examination Requirements for Nondestructive Test Personnel). They can be machined in welded plate, pipe, bolts, or any test prop. Also available in diameters and depths other than stated above. Diameters as small as 0.0015 (0.038mm) are possible, depending on depth.
dia dp
dia dp
dp dia
Irregularly-shaped pits
These holes and pits are machined in irregular configurations, not described above. Includes oval-bottom pits, round-bottom pits, 90 conical pits, star-shaped, square holes, hex holes, and realistic pits. EDM pit electrodes can be cast from real pits and used to reproduce actual pits very accurately. If you still havent seen the hole you need, use your imagination...well figure out how to accomplish it.
Tel: 267-203-1600
Fax: 267-203-1601
IIW-Type 2 Block
This is a modified version of the original IIW-Type 1 design. Includes a 2.0 radius x .250 deep cut-out superposed on the 4.0 radius for distance calibration. Also includes numbers 3, 5 and 8 through holes (3/64, 5/64 and 8/64 diameter) and distance calibration marks to the 2.0 hole. In accordance with International Institute of Welding, ASTM E164, and U.S. Air Force NDI Manual T.O. 33B-1-1 specifications. Dimensions: 12.0 x 4.0 x 1.0. NSN is 6635-00-415-9225. Metric version available.
DC Block
AWS-type block used for shear wave distance calibration. Contains a 1.0 radius overlaying a 2.0 radius on a 180 segment. In accordance with ASTM E164 and BRR/AWS X-1 specifications. Dimensions: 2.0 radius section is .5 thick, 1.0 radius section is 1.0 thick. Metric version available.
SC Block
AWS-type block used for shear wave sensitivity calibration. Contains two .062 diameter through holes. In accordance with ASTM E164 and BRR/AWS requirements. Dimensions: 3.00 x 1.25 x .905. Metric version available.
DSC Block
AWS-type block used for shear wave distance and sensitivity calibration. Contains a 1.0 radius opposite a 3.0 radius. The 3.0 radius includes a .375 deep x .032 wide radiused slot. Also contains a 0 reference point for checking exit point on wedge, and a .125 diameter through hole and corresponding markings at 45, 60 and 70 for measuring actual refracted angle. In accordance with ASTM E164 and AWS 6.16.1B. Dimensions: 1.0 thick. Metric version available.
DS Block
AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0 high section between two 4.0 sections. In accordance with AWS requirements. Dimensions: 6.0 x 4.0 x 2.0.
Tel: 267-203-1600
Fax: 267-203-1601
5-Step Block
Thickness and linearity calibration. This 5-Step block comes in thicknesses of .100, .200, .300, .400 and .500. Step face measures .750 x .750. In accordance with ASTM E797. Two metric versions available. (5A and 5B)
Tel: 267-203-1600
Fax: 267-203-1601
Tel: 267-203-1600
Fax: 267-203-1601
VW Step Block
Metric 8-step thickness and linearity calibration block. This block comes in thicknesses of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, and 8.0mm. Step face measures 15mm x 15mm.
10-Step Block
Special step block for thickness and linearity calibration. There are three versions of the block available. The 10-Step Inch version is made to PH Tool drawing no. 10142 and goes from 0.100 to 1.000 in 0.100 increments. Face measures 0.750 x 0.750. The 10-Step Metric 10A version (drawing no. 10143) goes from 2.5 to 25.0mm in 2.5mm increments. The 10-Step Metric 10B version (drawing no. 10144) goes from 2.0 to 20.0mm in 2.0mm increments. Step face on both metric versions is 20mm x 20mm.
Tel: 267-203-1600
Fax: 267-203-1601
FAST UT Sizing Block - This popular block contains 1/32 dia. SDHs at
0.100, 0.200, 0.300, 0.400 with corresponding beam exit marks for 70 engraved on both sides. Also contains two EDM notches at 0.050 and 0.100 deep x .011 wide x 0.500 long. Alloy: ASTM A516 Grade 70 PVQ plate. In accordance with PH Dwg. No. 10539 Rev. 01. Dimensions: 0.500 x 1.000 x 12.000. Specials with EDM slots and holes are also available.
Tel: 267-203-1600
Fax: 267-203-1601
ASTM Specials
Special blocks are available in exotic alloys, shapes other than the standard 2 diameter, metric dimensions, concave or convex radius ends, or non-typical quantities of blocks per set. Extra-long blocks up to 40 metal travel distance at 4 inch diameter are available. In accordance with ASTM E127 and E428 specifications. Custom hardwood storage cases available.
Tel: 267-203-1600
Fax: 267-203-1601
Tel: 267-203-1600
Fax: 267-203-1601
4" 9"
NOTCH No. 1 2 3 4 TYPE SQUARE SQUARE SQUARE SQUARE DEPTH 0.0354 0.0347 0.0355 0.0355 WIDTH 0.0179 0.0182 0.0202 0.0201
#3
LENGTH 0.97 0.97 0.97 0.97 LOCATION OD ID OD ID ORIENTATION LONGITUDINA LONGITUDINA L TRANSVERSE TRANSVERSE
10
Tel: 267-203-1600
Fax: 267-203-1601
11
Tel: 267-203-1600
Fax: 267-203-1601
2" .500"
4" 9"
#3
12
Tel: 267-203-1600
Fax: 267-203-1601
48
Typical standard for circumferential scanning containing two (2) notches, one (1) OD longitudinal and one (1) ID longitudinal. Typical length required is 48. Notch depth, width, and length vary by specification. Notch location can be customer-specified. ID notch location can be 12 from end on IDs over approximately 0.180. Reduces to 6 from .058 end on 0.080 ID. This design is common to many UT specifications including MIL-T-16420K and MIL-T-23226.
#1 .250 12 14
#3
#2
48
13-Notch UT Standard
Custom standard containing 13 EDM notches. Twelve (12) are .100 long and are separated by .100. One (1) is 1.000 long. Notch depth varies from 10% to 90% of wall thickness. Notch width is 0.005. Narrower notch widths are available if preferred or if standard will be dual purpose UT/ET., All notches 13" on this standard are longitudinally 8 9 10 .064 oriented, however circumferential notches can be machined also. 11 12 13
6.5 6.7 7.6 7.8 8.0 13.0
.500"
SER NO.
0.0
4.0
5.7 5.9
6.1 6.3
13
Tel: 267-203-1600
Fax: 267-203-1601
36
Popular standard for round bar inspection containing one (1) circumferentially oriented V-Notch (normally 60 included angle), and one (1) FBH. Notch depth and length, and FBH depth and diameter vary by specification. V-Notches are uniformly deep relative to the diameter. V-Notch angles other than 60 are available.
#1
#2
#3
1.680
18
36
54
72
5/8-11 STUD
SERIAL NO.
#1
#3 #4 #5 1.3 typ #6 #7 #8
#2 24 0
12
16
20 24
.235"
#1
14
Tel: 267-203-1600
Fax: 267-203-1601
3"
KAPL ID NO. #5
#1
#2
#6
1" TYP
5"
#3 #7
A
#4 #8
DETAIL B
.273"
SECTION A-A
Remember, we routinely build Specials and Purpose-built Blocks for UT. If you need one block or 100, we can make it. And if your need is an Emergency, such as a plant outage or a grounded plane, our Rush service will get it to you when you need it.
15
Tel: 267-203-1600
Fax: 267-203-1601
TECH SCALES
Tech Scales (Pack of 5)
Youve seen them at our booth at trade shows over the years, now our handy NDT Technician scales are available for sale in packages of five scales. Made of sturdy, anodized aluminum, these great little scales are Inch on one side (0 to 8 inch in increments of .050, and .100), and Metric on the other (0 to 200 mm in 1 mm increments.)
16
Tel: 267-203-1600
Fax: 267-203-1601
12
This standard is used to establish and verify system response for ET examination of nonferromagnetic steam generator heat exchanger tubing. Manufactured from tubing of the same nominal size and material type as that being examined. Discontinuities include one (1) through-wall hole (0.052 dia for tubing 3/4 and under; 0.067 dia for over 3/4); four (4) through-wall holes @ .026 dia (for tubing 3/4 and under) or .033 dia (for tubing over 3/4) indexed 90; one (1) 7/64 FBH @ 60%; and four (4) 3/16 FBHs @ 20% indexed 90. Tubing can be customer or PH Tool-supplied. In accordance with 2007 ASME Section V, Article 8, Appendix II, Paragraph II-860.2.
0"
4"
6"
7"
8"
11"
12"
13"
This standard is used to establish and verify system response for ET examination of nonferromagnetic steam generator heat exchanger tubing. Manufactured from tubing of the same nominal size and material type as that being examined. Discontinuities include one (1) through-wall hole (0.052 dia for tubing 3/4 and under; 0.067 dia for over 3/4); one (1) 5/64 dia FBH @ 80% deep; one (1) 7/64 FBH @ 60%; one (1) 3/16 FBH @ 40%; four (4) 3/16 FBHs @ 20% indexed 90; one (1) 1/8 wide 360 OD groove at 20% deep; and one (1) 1/16 wide 360 ID groove @ 10%. Tubing can be customer or PH Tool-supplied. In accordance with ASME Section V, Article 8, Appendix I, Paragraph I-865.
14"
1
.353" SER NO.
6
.020
0.00
2.00
4.00
6.00
8.00
10.00
12.00
Custom standard containing five (5) 0.010 diameter FBHs at varying depths from 0.002 to 0.006, and one (1) 0.010 diameter through-wall hole. FBH depth and location can be customer-directed. Typical separation between holes is 2.
Popular standard containing three (3) wearscars at 180 circumferential extent at depths (wall loss) of 25%, 50%, and 75% of wall thickness. 20%, 40%, 60% also popular. Extent of wearscar can be other than 180 if preferred. Standard also contains one (1) through-wall hole (0.052 dia. for tubing 3/4 and under; 0.067 dia. for tubing over 3/4. Circ extents of 120 and 360 also available.
1 .500"
1.2" TYP
12" 6 7
This standard contains nine (9) circumferentially-oriented OD EDM notches. All notches are 20% TWD (through-wall depth). Circumferential extent is 10 through 90 in 10 increments. Notch width is normally 0.005 to 0.010. Other variations are available.
17
Tel: 267-203-1600
Fax: 267-203-1601
3/4 .010
Used with ASME and other eddy current calibration standards. ID of support ring fits OD of tube standard with approximately 0.010 clearance. Length of support ring typically varies from 1/4 to 1 depending on application. Available in many materials.
ID Thinning Standard
Popular eddy current standard used to represent general uniform wastage (ID wall loss). Contains four (4) 2.0 long bands @ 10%, 20%, 30%, and 40% wall loss at 360 circumferential extent. Standard is made in two (2) 11 long pieces (22 overall) and is joined with a plastic coupling on the OD. Can be made in any tube alloy and size. Material is typically available from our stock with MTRs. If we dont stock it, well get it. Or, as always, this standard can be made from customer-supplied material.
Tel: 267-203-1600
Fax: 267-203-1601
18
#1
.008
#2
.020
#3
.040
3/4" TYP
.250"
This common standard contains three (3) surface notches at depths of 0.008, 0.020, and 0.040. Notch width typically 0.004 to 0.005, with other widths possible. Optional notch #4 is a 0.030 by 0.030 45 corner notch. (not pictured on sketch) Materials offered include 7075T6 Aluminum, AISI 4340 Steel, Type 304 Stainless Steel, 6Al-4V Titanium, Inconel 600, Inconel 625, Inconel 690, and others. Notch depths are machine engraved on one edge; serial number and alloy on the other. NIST traceable. Block dims: 3.0 x 1.0 x .25. In accordance with PH Drawing No. 10075.
19
Tel: 267-203-1600
Fax: 267-203-1601
Top
Bottom
Tel: 267-203-1600
Fax: 267-203-1601
20
12
NOTCH #2 5
Used to verify system performance, this plate contains EDM notches oriented 90 to the magnetic flux. Notch dimensions are 0.063 long x 0.006 wide x 0.020 deep (maximum dimensions). Material is 3/8 thick low alloy steel plate of convenient size. Notches are normally filled flush with a nonconducting material, such as epoxy, to prevent mechanical holding of the indicating medium. Plate at left shows one (1) notch oriented parallel to the weld, and another perpendicular to the weld. In accordance with MIL-STD-271F (SHIPS), Paragraph 4.3.1.2.
C L 3/8
21
www.phtool.com
Tel: 267-203-1600
Fax: 267-203-1601
7
4 12 9 3 NOTCH #1 8
7 11 5
10
C L
C L
C L
1/2
WELD 3 WELD 2 WELD 1 CONTOURED AS-WELDED ROOT WELD IN BEVEL AREA 1/32" REINFORCEMENT 1/16" REINFORCEMENT AS-WELDED
Popular Navy LP prop consisting of a Stainless Steel plate with three (3) welds. Both the plate material and weld filler material are 300 series Stainless Steel. One weld is 1/32 reinforcement and is contoured (ground); the second is 1/16 reinforcement in the as-welded condition, the third is an as-welded root weld in a 90 V-groove. Plate contains twelve (12) microsized holes (NSTR-99) and one (1) linear indication (EDM notch). Notch is typically 0.250 long x 0.002 - 0.003 wide x 0.010 - 0.015 deep. Plate size is 5 x 7 x 1/2. Plates can be customer or PH Tool-supplied. Notches and holes of varying dimensions are also available. Certification Report with as-built hole and notch dimensions, and a map of defect locations is included.
22
Tel: 267-203-1600
Fax: 267-203-1601
Angle Gage
Go No-Go Gage
23
Tel: 267-203-1600
Fax: 267-203-1601
SERVICES AVAILABLE
Sinker EDM
Electrical Discharge Machining (EDM) using Sinker or Ram machines has been our specialty since the 1970s when this technology first became available to industry. As a pioneer in EDM, PH Tool quickly became known as the logical source for EDM Notch reference standards for the NDT community. Today, we have 13 Sinkers in our EDM Department ready to handle your notch requirements. All of our machines are purpose-built and allow us to accommodate any size standard from the smallest weighing only a few ounces to those exceeding 2 tons.
Wire EDM
EDM using Wire machines is another area of expertise for the company. This unique, non-conventional machining method allows the precise shaping of metals that cannot be machined any other way. Of the two wire EDMs we have in our EDM Department, one is especially large with table travels of 27 x 16 x 16 tall and is one of only 10 of its kind in service in the US. These machines can make complex shapes up to 16 tall including turbine disks, hubs, wheels, pipe sections of special size or heavy walls, dovetails, gears,
CNC Milling
When we decided to expand our capabilities beyond EDM Notch standards into the manufacture of ultrasonic test blocks, eddy current standards, and magnetic particle/liquid penetrant standards, we knew that wed need to invest in CNC machining centers. Today we have six CNC mills running every day making test blocks for NDT and peck drilling flat bottom holes (FBH).
Tel: 267-203-1600
Fax: 267-203-1601
24
SERVICES AVAILABLE
Surface Grinding
Ten surface grinders give us capacities that are unheard of in the NDT world. Our largest wet grinders are perfect for the incredibly accurate grinding of test blocks, while ensuring the exacting surface finishes that are expected in our industry. Beyond our normal range of grinders, we built a custom machine for grinding tall parts such as extra-long ASTM flat bottom hole reference blocks up to 48.
Tel: 267-203-1600
Fax: 267-203-1601
25
CERTIFICATION REPORT
CUSTOMER: SERIAL NO: MATERIAL:
DATE:
10/15/2010 4313768
PO NO:
Manufactured in accordance with Quality Assurance Program Revision 2 dated 1/15/08 that complies with MIL-Q-9858A, 10CFR50 App B, ANSI N45.2, ASME Sec III Div 1 and MIL-I-45208A.
#1 .750 12 14 60
#3 .049 12 14
#2
#4
NOTCH No. 1 2 3 4
TYPE U U U U
LOCATION OD ID OD ID
IT IS CERTIFIED THAT THIS REFERENCE STANDARD HAS BEEN MANUFACTURED IN ACCORDANCE WITH APPLICABLE SPECIFICATIONS AND INSPECTED WITH INSTRUMENTS CALIBRATED IAW MIL-STD-45662 (LATEST REV.), ISO 10012-1 AND ANSI/NCSL Z540-1 USING MASTER GAGE BLOCKS AND MICRORULE MASTER SCALES DIRECTLY TRACEABLE TO THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST).
SAMPLE ONLY
AUTHORIZED SIGNATURE _____________________________________________________________ PHILIP R. HERMAN, QA MANAGER
4406 BETHLEHEM PIKE, TELFORD, PA 18969 USA T: 267-203-1600 F: 267-203-1601 www.phtool.com This Certification Report shall not be reproduced except in full, without the written approval of PH TOOL.
Page 1 of 1
26
Fax: 267-203-1601
______________________ ______________________ ______________________
Company: ___________________
City/State: ______________________
Order
Descibe item(s) you wish to order below or attach purchase order. PO No.: ____________________ Need date: __________________________ Ship method: _______________ Call to discuss? Yes ___ No ___ ____________________________________________________________________ ____________________________________________________________________ __________________________________________________________________
Other
____________________________________________________________________ ____________________________________________________________________ __________________________________________________________________
27
Tel: 267-203-1600
Fax: 267-203-1601
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE IIW-TYPE 1 IIW-TYPE 1 IIW-TYPE 1 IIW-TYPE 1 CASE CORDURA SHOULDER POUCH IIW-TYPE 1, METRIC IIW-TYPE 1, METRIC IIW-TYPE 1, METRIC IIW-TYPE 1, METRIC CASE CORDURA SHOULDER POUCH IIW-TYPE 2 IIW-TYPE 2 IIW-TYPE 2 IIW-TYPE 2 CASE CORDURA SHOULDER POUCH IIW-TYPE 2, METRIC IIW-TYPE 2, METRIC IIW-TYPE 2, METRIC IIW-TYPE 2, METRIC CASE CORDURA SHOULDER POUCH MINI IIW-TYPE 2, 1x2x6", Dwg. 10147 MINI IIW-TYPE 2, 1x2x6", Dwg. 10147 MINI IIW-TYPE 2, 1x2x6", Dwg. 10147 MINI IIW-TYPE 2, 1x2x6", Dwg. 10147 CASE MINI IIW-TYPE 2, METRIC, 25x50x150mm, Dwg. 10160 MINI IIW-TYPE 2, METRIC, 25x50x150mm, Dwg. 10160 MINI IIW-TYPE 2, METRIC, 25x50x150mm, Dwg. 10160 MINI IIW-TYPE 2, METRIC, 25x50x150mm, Dwg. 10160 CASE PHASED ARRAY CRACK SIZING (PACS) BLOCK PHASED ARRAY CRACK SIZING (PACS) BLOCK PHASED ARRAY CRACK SIZING (PACS) BLOCK PHASED ARRAY CRACK SIZING (PACS) BLOCK CASE PHASED ARRAY CALIBRATION BLOCK NO. 2 PHASED ARRAY CALIBRATION BLOCK NO. 2 PHASED ARRAY CALIBRATION BLOCK NO. 2 PHASED ARRAY CALIBRATION BLOCK NO. 2 CASE Page 28 - 1
LIST PRICE 399 399 701 Call 63 63 459 459 807 Call 63 63 466 466 816 Call 63 63 536 536 938 Call 63 63 466 466 816 Call 47 536 536 938 Call 47 1495 1495 1995 Call 90 825 825 1115 Call 69
STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE DC BLOCK DC BLOCK DC BLOCK DC BLOCK CASE SC BLOCK SC BLOCK SC BLOCK SC BLOCK CASE DSC BLOCK DSC BLOCK DSC BLOCK DSC BLOCK CASE DS BLOCK DS BLOCK DS BLOCK DS BLOCK CASE 4-STEP BLOCK, .250, .500, .750, 1.000" 4-STEP BLOCK, .250, .500, .750, 1.000" 4-STEP BLOCK, .250, .500, .750, 1.000" 4-STEP BLOCK, .250, .500, .750, 1.000" CASE 4-STEP BLOCK - METRIC 4A, 6.25, 12.50, 18.75, 25.00mm 4-STEP BLOCK - METRIC 4A, 6.25, 12.50, 18.75, 25.00mm 4-STEP BLOCK - METRIC 4A, 6.25, 12.50, 18.75, 25.00mm 4-STEP BLOCK - METRIC 4A, 6.25, 12.50, 18.75, 25.00mm CASE 4-STEP BLOCK - METRIC 4B, 5.0, 10.0, 15.0, 20.0mm 4-STEP BLOCK - METRIC 4B, 5.0, 10.0, 15.0, 20.0mm 4-STEP BLOCK - METRIC 4B, 5.0, 10.0, 15.0, 20.0mm 4-STEP BLOCK - METRIC 4B, 5.0, 10.0, 15.0, 20.0mm CASE 5-STEP BLOCK, .100, .200, .300, .400, .500" 5-STEP BLOCK, .100, .200, .300, .400, .500" 5-STEP BLOCK, .100, .200, .300, .400, .500" 5-STEP BLOCK, .100, .200, .300, .400, .500" CASE
ALLOY STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM
LIST PRICE 220 220 386 Call 38 221 221 388 Call 33 291 291 510 Call 39 584 584 1021 Call 97 168 168 295 Call 30 193 193 339 Call 30 193 193 339 Call 30 185 185 324 Call 30
Page 28 - 2
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE 5-STEP BLOCK - METRIC 5A, 2.5, 5.0, 7.5, 10.0, 12.5mm 5-STEP BLOCK - METRIC 5A, 2.5, 5.0, 7.5, 10.0, 12.5mm 5-STEP BLOCK - METRIC 5A, 2.5, 5.0, 7.5, 10.0, 12.5mm 5-STEP BLOCK - METRIC 5A, 2.5, 5.0, 7.5, 10.0, 12.5mm CASE 5-STEP BLOCK - METRIC 5B, 2.0, 4.0, 6.0, 8.0, 10.0mm 5-STEP BLOCK - METRIC 5B, 2.0, 4.0, 6.0, 8.0, 10.0mm 5-STEP BLOCK - METRIC 5B, 2.0, 4.0, 6.0, 8.0, 10.0mm 5-STEP BLOCK - METRIC 5B, 2.0, 4.0, 6.0, 8.0, 10.0mm CASE 10-STEP BLOCK, 0.1 to 1.0" x 0.1" Increments 10-STEP BLOCK, 0.1 to 1.0" x 0.1" Increments 10-STEP BLOCK, 0.1 to 1.0" x 0.1" Increments 10-STEP BLOCK, 0.1 to 1.0" x 0.1" Increments CASE 10-STEP BLOCK - METRIC 10A, 2.5 to 25.0 x 2.5mm Increments 10-STEP BLOCK - METRIC 10A, 2.5 to 25.0 x 2.5mm Increments 10-STEP BLOCK - METRIC 10A, 2.5 to 25.0 x 2.5mm Increments 10-STEP BLOCK - METRIC 10A, 2.5 to 25.0 x 2.5mm Increments CASE 10-STEP BLOCK - METRIC 10B, 2.0 to 20.0 x 2.0mm Increments 10-STEP BLOCK - METRIC 10B, 2.0 to 20.0 x 2.0mm Increments 10-STEP BLOCK - METRIC 10B, 2.0 to 20.0 x 2.0mm Increments 10-STEP BLOCK - METRIC 10B, 2.0 to 20.0 x 2.0mm Increments CASE THIN-STEP BLOCK - .040, .060, .080, .100" THIN-STEP BLOCK - .040, .060, .080, .100" THIN-STEP BLOCK - .040, .060, .080, .100" THIN-STEP BLOCK - .040, .060, .080, .100" CASE MAGNA THIN-STEP BLOCK - .020, .040, .060, .080, .100" MAGNA THIN-STEP BLOCK - .020, .040, .060, .080, .100" MAGNA THIN-STEP BLOCK - .020, .040, .060, .080, .100" MAGNA THIN-STEP BLOCK - .020, .040, .060, .080, .100" CASE TIPSY STEP BLOCK, 1.0 to 4.5" x .5" Increments TIPSY STEP BLOCK, 1.0 to 4.5" x .5" Increments TIPSY STEP BLOCK, 1.0 to 4.5" x .5" Increments TIPSY STEP BLOCK, 1.0 to 4.5" x .5" Increments CASE
ALLOY STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM
LIST PRICE 213 213 373 Call 30 213 213 373 Call 30 648 648 1134 Call 53 745 745 1304 Call 53 745 745 1304 Call 53 389 389 624 Call 30 575 575 952 Call 30 549 549 880 Call 69
Page 28 - 3
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE UNIVERSAL TIPSY BLOCK, 1.0 to 4.0" and 25mm to 100mm UNIVERSAL TIPSY BLOCK, 1.0 to 4.0" and 25mm to 100mm UNIVERSAL TIPSY BLOCK, 1.0 to 4.0" and 25mm to 100mm UNIVERSAL TIPSY BLOCK, 1.0 to 4.0" and 25mm to 100mm CASE CURVED OD 5-STEP BLOCK - .100, .200, .300, .400, .500" CURVED OD 5-STEP BLOCK - .100, .200, .300, .400, .500" CURVED OD 5-STEP BLOCK - .100, .200, .300, .400, .500" CURVED OD 5-STEP BLOCK - .100, .200, .300, .400, .500" CASE EDM SLOT SIZING BLOCK - .100 to .900" x .100" Increments EDM SLOT SIZING BLOCK - .100 to .900" x .100" Increments EDM SLOT SIZING BLOCK - .100 to .900" x .100" Increments CASE DRILLED HOLE SIZING BLOCK - .100 to .900" x .100" Increments DRILLED HOLE SIZING BLOCK - .100 to .900" x .100" Increments DRILLED HOLE SIZING BLOCK - .100 to .900" x .100" Increments CASE "FAST" UT SIZING BLOCK, P/N 10072 CASE TYPE MAB MINI ANGLE BEAM TYPE MAB MINI ANGLE BEAM TYPE MAB MINI ANGLE BEAM TYPE MAB MINI ANGLE BEAM CASE IOW BEAM PROFILE BLOCK, Inch or mm IOW BEAM PROFILE BLOCK, Inch or mm IOW BEAM PROFILE BLOCK, Inch or mm IOW BEAM PROFILE BLOCK, Inch or mm CASE AWS RESOLUTION BLOCK AWS RESOLUTION BLOCK AWS RESOLUTION BLOCK AWS RESOLUTION BLOCK CASE NAVSHIPS TEST BLOCK NAVSHIPS TEST BLOCK NAVSHIPS TEST BLOCK NAVSHIPS TEST BLOCK CASE
ALLOY STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS STEEL ALUM SS STEEL STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM
LIST PRICE 605 605 965 Call 69 340 340 595 Call 53 1053 1053 1748 66 916 916 1497 66 1155 66 227 227 396 Call 39 540 540 944 Call 69 240 240 422 Call 44 408 408 712 Call 69
Page 28 - 4
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE NAVSHIPS "3020" TEST BLOCK - NAVY TYPE NAVSHIPS "3020" TEST BLOCK - NAVY TYPE NAVSHIPS "3020" TEST BLOCK - NAVY TYPE NAVSHIPS "3020" TEST BLOCK - NAVY TYPE NAVSHIPS "3020" TEST BLOCK - NAVY TYPE CASE MINI RESOLUTION BLOCK MINI RESOLUTION BLOCK MINI RESOLUTION BLOCK MINI RESOLUTION BLOCK CASE 30 FBH RESOLUTION BLOCK 30 FBH RESOLUTION BLOCK 30 FBH RESOLUTION BLOCK 30 FBH RESOLUTION BLOCK CASE ASME N-625 REFERENCE PLATE ASME N-625 REFERENCE PLATE ASME N-625 REFERENCE PLATE ASME N-625 REFERENCE PLATE CASE ASME SEC V BASIC CAL BLOCK ("T) ASME SEC V BASIC CAL BLOCK ("T) ASME SEC V BASIC CAL BLOCK ("T) CASE ASME SEC V BASIC CAL BLOCK ("T) - LONG VERSION ASME SEC V BASIC CAL BLOCK ("T) - LONG VERSION ASME SEC V BASIC CAL BLOCK ("T) - LONG VERSION CASE ASME SEC V BASIC CAL BLOCK (3/4"T) ASME SEC V BASIC CAL BLOCK (3/4"T) ASME SEC V BASIC CAL BLOCK (3/4"T) CASE ASME SEC V BASIC CAL BLOCK (3/4"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (3/4"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (3/4"T) - LONG VERSION CASE ASME SEC V BASIC CAL BLOCK (1"T) ASME SEC V BASIC CAL BLOCK (1"T) ASME SEC V BASIC CAL BLOCK (1"T) CASE
ALLOY 1018 STEEL HY-80 ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS
LIST PRICE 840 1034 840 1488 Call 69 423 423 739 Call 32 2147 2147 3757 Call 84 642 642 1122 Call 69 750 750 1014 69 938 938 1268 86 771 771 1039 69 965 965 1299 86 880 880 1207 90
Page 28 - 5
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE ASME SEC V BASIC CAL BLOCK (1"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (1"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (1"T) - LONG VERSION CASE ASME SEC V BASIC CAL BLOCK (3"T) ASME SEC V BASIC CAL BLOCK (3"T) ASME SEC V BASIC CAL BLOCK (3"T) CASE ASME SEC V BASIC CAL BLOCK (3"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (3"T) - LONG VERSION ASME SEC V BASIC CAL BLOCK (3"T) - LONG VERSION CASE ASME SEC V BASIC CAL BLOCK (5"T) ASME SEC V BASIC CAL BLOCK (5"T) ASME SEC V BASIC CAL BLOCK (5"T) CASE ASTM AREA AMPLITUDE SET OF 8 ASTM AREA AMPLITUDE SET OF 8 ASTM AREA AMPLITUDE SET OF 8 ASTM AREA AMPLITUDE SET OF 8 CASE ASTM DISTANCE/AREA AMPL. SET OF 10 ASTM DISTANCE/AREA AMPL. SET OF 10 ASTM DISTANCE/AREA AMPL. SET OF 10 ASTM DISTANCE/AREA AMPL. SET OF 10 CASE ASTM DISTANCE AMPLITUDE SET OF 19, #3/5/8 ASTM DISTANCE AMPLITUDE SET OF 19, #3/5/8 ASTM DISTANCE AMPLITUDE SET OF 19, #3/5/8 ASTM DISTANCE AMPLITUDE SET OF 19, #3/5/8 CASE V1/5 (A2) TEST BLOCK V1/5 (A2) TEST BLOCK V1/5 (A2) TEST BLOCK V1/5 (A2) TEST BLOCK CASE V2 (A4) 12.5, 20, and 25mm TEST BLOCK V2 (A4) 12.5, 20, and 25mm TEST BLOCK V2 (A4) 12.5, 20, and 25mm TEST BLOCK V2 (A4) 12.5, 20, and 25mm TEST BLOCK CASE
ALLOY STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM STEEL ALUM SS TITANIUM
LIST PRICE 1320 1320 1811 135 1118 1118 1629 188 1957 1957 2851 N/A 2136 2136 Call N/A 1801 2058 2857 Call 111 2051 2460 3272 Call 117 3717 4299 5868 Call 188 556 556 953 Call 63 346 346 587 Call 39
Page 28 - 6
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com
TEST BLOCK TYPE ISO 7963 TEST BLOCK No. 2 (12.5, 20, and 25mm) ISO 7963 TEST BLOCK No. 2 (12.5, 20, and 25mm) ISO 7963 TEST BLOCK No. 2 (12.5, 20, and 25mm) ISO 7963 TEST BLOCK No. 2 (12.5, 20, and 25mm) CASE VW STEP BLOCK, 1-8mm STEPS VW STEP BLOCK, 1-8mm STEPS VW STEP BLOCK, 1-8mm STEPS VW STEP BLOCK, 1-8mm STEPS CASE ASTM E317 RESOLUTION BLOCK, FIG. 1 ASTM E317 RESOLUTION BLOCK, FIG. 1 ASTM E317 RESOLUTION BLOCK, FIG. 1 CASE ASTM E317 RESOLUTION BLOCK, FIG. 6, #3 FBHs ASTM E317 RESOLUTION BLOCK, FIG. 6, #3 FBHs ASTM E317 RESOLUTION BLOCK, FIG. 6, #3 FBHs CASE ASTM E317 RESOLUTION BLOCK, FIG. 6, #1 FBHs ASTM E317 RESOLUTION BLOCK, FIG. 6, #1 FBHs ASTM E317 RESOLUTION BLOCK, FIG. 6, #1 FBHs CASE
NOTES:
ALLOY STEEL ALUM SS TITANIUM STEEL ALUM 303 SS TITANIUM STEEL ALUM SS STEEL ALUM SS STEEL ALUM SS
LIST PRICE 346 346 587 Call 39 580 683 739 Call 30 496 496 869 55 1506 1506 2635 82 1741 1741 3047 82
1. METRIC BLOCKS NOT SEPARATELY PRICED MUST ADD 15% TO IMPERIAL (INCH) PRICING. (does not apply to IOW, V1, V2, VW, or ISO 7963 Blocks) 2. ALL OTHER STANDARDS IN THIS CATALOG, INCLUDING SPECIAL TEST BLOCKS, ARE QUOTED INDIVIDUALLY. 3. ASTM SET OF 19 WITH #1 FBH ADDS 35% TO PRICE. 4. ASTM SET OF 19 WITH #2 FBH ADDS 15% TO PRICE. 5. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Page 28 - 7
PH TOOL
4406 BETHLEHEM PIKE TELFORD PA 18969 PHONE: 267-203-1600 FAX: 267-203-1601 www.phtool.com LIST PRICE FOR DIMENSIONAL INSPECTION 137 161 137 85 71 119 196 61 66 61 119 85 172 85 137 119 N/A 172 262 262 286 347 538 716 525 620 656 775 1246 191 1472 922 1317 161 132 119 478 1163 180 381 209
Page 29