Escolar Documentos
Profissional Documentos
Cultura Documentos
Mains
Technical Data
System power (load) kVA Active power (load) kW Power factor (load) Rated Voltage V Input Data
Voltage Power factor Frequency max. starting current 400V/480V 10% 0,98 at rated operation 50/60 Hz 1,5%..3% (adjustable) < 0,1 x Ir
RT 400 400
RT Parallel System power x number of units 320 600 1000 Active power x number of units 0,8 inductive to 0,9 capacitive (others with derating) 400 / 480 up to 24KV
RT 750 750
RT 1250 1250
Output Data
Ride Through time Voltage (static) Voltage (dynamic) Recovery time Voltage THD Voltage asymmetry Overload capability Short circuit capacity Power terminals 15 seconds with rated load 30 seconds with half load 1% 5% (at mains failure) 250 ms (50% load step) < 3,5% (line-line with linear load) 120 1% 1 hour 110%, 10 minutes 125%, 1 minute 150% > 10 x Ir 3 phase plus N (4 wire)
Dimensions and Weights Weight (kg) Length (mm) Width (mm) Height (mm) General Data
System efficiency Ambient temperature Relative humidity Installation altitude Degree of protection Cable entry Classification
Data for high voltage, containerized systems or other specific requirements on request.
All data in this brochure is for information only and is subject to change without prior notice. No rights can be obtained from the contents of this brochure. Data provided in our offerings prevail at all times.
Hitec Power Protection bv P.O. Box 65 2 7600 AB Almelo The Netherlands Phone: +31 546 589 589 Fax: +31 546 589 489 E-mail: info@hitec-ups.com www.hitec-ups.com