Escolar Documentos
Profissional Documentos
Cultura Documentos
www.nafems.org
range of industry sectors, including Aerospace, Land Transport, Biomedical, Civil Construction, Consumer Goods, Marine and Offshore, Power and Pressure Systems and Process & Manufacture, is now closed. This work was carried out as part of the FENet Project. The survey, consisting of over 450 questions, included a wide range of issues covering education and awareness, the staffing of FE products, the cost of FE products; support-related matters in the widest sense, and an extensive list of functionality-related matters, including integration of the analysis function. Particular emphasis was placed on the topics of multi-physics & analysis technology, life extension & durability and product & system optimization, as these are identified themes within the FENet project. In addition to documenting current state of practice, it is anticipated that the results will provide the basis for other useful business benefits including: making a useful input to technical strategies and roadmaps; providing a focus for identifying potential areas of competitive advantage; facilitating the identification of areas for possible code development; Page 6
he FENet world-wide survey, which sought to establish the significance of barriers to the effective use of finite element analysis across a
General Information
Over 1300 replies were received from more than 40 countries, although most responses came from the UK and US. Around 50% of respondents were industrial users, 20% were consultants, 15% academics, with the remainder being made up of software vendors and researchers. Of these industrial users, there were 20% each from Aerospace, Land Transport and Process &
Figure 1: How effective would you say your companies investment in FE technology has been?
January 2004
www.nafems.org
Manufacturing; 10% each from Power & Pressure Systems, Civil Engineering & Construction and Marine & Offshore, with the remainder from Consumer Goods and BioEngineering. From the replies, it was clear that the survey had mainly reached experienced users, with Linear Statics being the most common type of analysis being carried out, closely followed by Non-linear Statics. Interestingly, 40-50% of respondents worked in "business units" with less than 5 users and over 50% of respondents had Unix platforms.
Figure 2: Most Common Types of Analysis
In terms of non-purchase of an FE system (users of the technology only were surveyed remember), 75% of respondents indicated that cost was a common or major issue, 55% reported non-relevance of the technology as a common or major issue and 65% reported unclear of the cost benefits as a common or major issue. Additionally, 44% blamed current trading conditions as a common or major issue, 42% indicated that the level of complexity was a common or major issue for the products they had considered and 40% highlighted staffing issues as a common or major issue. In terms of non-renewal of FE system maintenance contracts, 53% of respondents indicated that a common Over 60% report that their use of FEA is growing and 7580% did not see an end to the ever increasing level of detail and complexity in models. or major issue was the fact that cost outweighed the business benefits, while 28% reported perceived inadequate support as a common or major issue. The availability of in-house expertise obviously has some bearing on the need to use hot-line support and 38% reported the availability of adequate in-house expertise as a common or major issue for non-renewal. On the other hand, 26% highlighted loss of in-house staff expertise as a common or major issue for non-renewal. The fact that software upgrades were not required was a common or major issue with 26% of respondents. With respect to getting the most out of the technology, 60% reported infrequent use as a common or major issue and similarly over 70% felt that ease of use was either very important or vital. Around 65% of respondents reported that time pressure was a common or major issue in terms of not getting the most out of the technology. Clearly there January 2004 Page 7
User Environment
In terms of the user environment, around 40% of respondents work in business units that operate internal user group meetings; around 60% employ some form of mentoring and around 45% disseminate best practice (precisely how is not known). Around 95% of respondents made use of personal contacts, thus emphasizing the importance of networking. Quite surprisingly perhaps, 7080% of respondents indicated that they use newsgroups and discussions forums. Interestingly, over 80% felt that some way of capturing and re-using experience would be useful. Perhaps there is a research opportunity to re-visit the area of knowledge management and expert systems, that failed to deliver some 10 - 20 years ago?
www.nafems.org
engineering departments, 28% reported closure and 49% reported a loss in facilities. While 60% reported a loss of staff in science and engineering, only 40% reported a loss in the number of specialist subjects in degrees. This contraction is perhaps in direct response to the fact that 58% reported a reduction in the number of students entering undergraduate engineering and related courses, with the same figure for postgraduate courses. Approaching 70% of the academic respondents reported
Integration
The perhaps numerous and detailed questions relating to the general topic of integration of the analysis and simulation function into the wider business enterprise is testimony enough to the importance placed on this area by the various industry coordinators involved in the development of the survey. The various replies confirm the importance. Around 50% of respondents rated simplification and defeaturing as very important to vital, while over 40% rated re-use of data and results as very important to vital. In addition, 50% rated FE to CAD updating as very important to vital and over 40% rated reuse of data and results as very important to vital. Although only 50% of respondents overall rated the use & control of legacy data as very important, this percentage was much higher in some business sectors.
Academia
Further trends in academia also give cause for concern and indicate a sector under change. It is perhaps an indication of cause and effect that 65% of academic respondents reported increased competition amongst institutions, whilst 61% reported increased collaboration. Of greater concern to the well-being of engineering and the future supply of well-qualified graduates to industry, is that around 48% reported merging amongst science and Page 8
January 2004
www.nafems.org
Levels (TRL's), which use ratings from 0(low)-9(high) to indicate both the Priority and the Maturity of the particular technology in the respondent's business sector. The @ highest 6.2 was Priority fatigue for life
Durability and Life Extension prediction and assessment, whilst the lowest Maturity @ 3.3 was damage/deterioration modelling and assessment. The highest Priority for Product and System Optimisation (PSO) @ 5.5 was application of structural and system optimisation tools, whilst the lowest Maturity @ 2.9 was use of decision support tools for management issues. In addition, 65% of PSO respondents felt that user education and training was a barrier to the effective use of the technology and 55% of PSO respondents felt that management education and awareness was lacking. The highest Priority for MultiPhysics and Analysis Technology @ 7.1 was automatic meshing, whilst the lowest Maturity @ 1.74 was magnetic hydrodynamics. This small sample of results from the three FENet Research & Technological Development (RTD) areas were drawn from a questionnaire report based on all responses. Reports based on responses from specific industry sectors were supplied to the various FENet Industry Coordinators and these reports in turn are reflected in the FENET Industry Requirement Reports (see www.fe-net.org). In many cases the "overall" and "industry-specific" conclusions were similar, but in some cases, marked differences were apparent. In the Aero Sector report, Failure Criteria for Advanced Materials had a Priority of 7 and a Maturity of 4. Probabalistic Methods was also highlighted as being important. In the Land Transport Sector, Modelling of Connections also had a Priority of 7 and a Maturity of 4. In the Civil & Construction Sector, Material Models for Buildings had a Priority of 7 and a Maturity of 4.5. In the Power & Pressure Systems Sector, Design by Analysis appeared as a significant issue and in the Process & Manufacturing Sector, Material Data appears a significant barrier.
Figure 4: Quality of support you get from consultants
Validation
The general issue of validation is clearly important to analysis and simulation. It is rather unfortunate therefore that this section of the questionnaire was probably less than satisfactory in terms of how the questions were posed and how users were constrained in their responses. Nevertheless, it is suggested that 95% of respondents felt that poor material data for input and assessment was important to vital as a validation issue and that 95% also saw the general lack of correlation with test as an important to vital issue. Unfortunately the questionnaire did not allow users to select more than one method of results validation. As a result, the conclusions in this area should probably be interpreted as the users most popular method of model validation. It will be reassuring to many that experimentation and test is alive and well, with almost 40% of respondents indicating that they use physical tests. Surprisingly, but perhaps evidence of the complexity of analyses being carried out, only just over 30% indicated hand calculations. Also perhaps surprising is that less than 4% indicated other FE codes and around 2% indicated nothing at all. The latter result perhaps being a protest at the length of the questionnaire!
Contact
Dr Jim Wood University of Strathclyde E J.wood@mecheng.strath.ac.uk W www.fe-net.org
January 2004
Page 9