Você está na página 1de 2

Quiz

Q1: Electrical Engineering covers a range of subtopics including the following:-

a) b) c) d)

Power, Electronics, Control systems, Single processing, Telecommunications. Power, Electronics, Control systems, Single processing, Mechanical Eng.

Control systems, Single processing, civil Eng, mechatronic. Data processing, computer, Electronics, Control systems.

Q2: Voltage drop is defined as:-

a) The voltage increase in electrical circuit due to current flow through the resistance in the conducting line. b) The decline in voltage in an electrical circuit due to the resistance in the conducting line. c) The voltage developed across a component or conductor by the flow of current through the resistance or impedance of that component or conductor. d) b & c
Q3: Which of the following are power system components:-

a) b) c) d) a) b) c) d)

Current, power factor, voltage. Overcurrent, earth fault, distances protection. Generation, Transmission, consumers. Transformer, substation, dam. Spike, swell, interruption, Harmonic. Trip, fault, damage, over current. .Noise, transient, impulse, over volt. a&c

Q4 : power quality problems are?

Q5 : the effect of the unbalanced load is :

a) Over heating b) Over current c) Over frequency d) increases the neutral current
Q6 Power factor is the relation between:

a) b) c) d)

real power, reactive power Reactive power and apparent power. Real power and apparent power. None of the above .


0888113344 : 0008031000 : 0844343810 :

E-mail : exemplarcenter@gmail.com

Q7: 2.3 kV to 30 kV volt level called:

a) b) c) d)

Generation volt level Fault volt level Transmission volt level Customer volt level

Q8: Parallel generators Operation should fulfill following conditions:

a) Current, volt, power factor are to be equal. b) Volt, frequency to be equal, and matching of phases sequence. c) Phase sequence, neutral current, frequency are be equal. d) Resistance, reactance, reluctance.
Q9: the power fault types are

a) b) c) d)
a) b) c) d)

Phase-to-Ground (or Single Phase) Phase-to-Phase (or Two-Phase) Phase-to-Phase-to-Ground (or Two Phase-to-Ground) All are correct.
Over frequency. Gas pressure relays. Oil and winding temperature devices. All are not correct

Q10: the following are the bus bar protection types


0888113344 : 0008031000 : 0844343810 :

E-mail : exemplarcenter@gmail.com

Você também pode gostar