Você está na página 1de 28

Mini Float Level Switch

visit our website

PRODUCT INTRODUCTION

4 INTRODUCTION
The reed switch relies on two basic scientific principles namely: buoyancy and magnetism. Buoyancy causes the float (which contains a magnet) to rise with the liquid and magnetism helps open and close the switch. Since this product's this product has been introduced to the market, it has seen significant improvement and advances with regards to convenience, safety and lowering costs. The float switches are extremely compact, simple and are easy to install on any small locations.

4 WORKING PRINCIPLE
Fig. 1 illustrates the pivot activation (FCH Type reed switch). When float's magnet is moved close to the switch's stationary stem, the float magnet pushes the stem's switch circuit together and closes the electrical circuit. When the float magnet is moved away from the stem, the switch circuit separates and the circuit is opened.

closed These switches are not affected by electrical interference and can withstand chemicals, high temperatures and pressures if the correct material of float switch is selected.

S N magnet

open (Fig. 1)

4 LIQUID PROPERTIES AND FLOATS


The switch's float should always have a specific gravity (SG) less than the liquid that holds the float. (SG float < SG liquid) When the liquid level rises the float will rise up due to its buoyancy. The float's upward movement will actuate the switch and close the circuit. Different float materials can be used to ensure the float's SG level is less than the liquid. (Water's SG level is 1 while gasoline SG levels tend to be less than 1). Because the float switches are activated by the magnetic field inside the float, make sure the liquid contains no iron traces or substances that can induce magnetic interference.

Fig. 2 illustrates perpendicular activation (FC V TYPE float reed switches). When the liquid level rises and pushes the float up, the floats ring magnet (sealed in the float) moves close to the switchs stationary stem. The magnet pushes the circuit together and when it makes contact, it closes the electrical circuit. When the float magnet moves away from the switch, the circuit contact is released and the switch is opened.

Ring Magnet
SG=0.9 SG=1

S N

S N

S3

(Fig. 3)

Reed switch open (OFF)

Reed switch closed (ON)

(Fig. 2)

CHEMICAL RESISTANCE

Excellent
Chemical Concentration Temp Plastic Rubber Stainless

Good
Plastic

Fair

Corroded 304 316

Ammonia Water NH4OH Aque Regia 3HCI+HNO3 Benzene C6H6

10 10 10 10 Pure

PVC PP PVDF PTFE NBR BC 40 104 80 176


40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

304 316

Chemical

Concentration Temp

Rubber Stainless

Sodium Hypochlorite
NaCIO

3 3 5 5 7 7 10 10 13 13

PVC PP PVDF PTFE NBR BC 40 104 80 176


40 104 80 176 40 104 80 176 40 80 40 80 104 176 104 176

Bleaching Liquor 5 Ca(CIO)2 5 20 20 Boric Acid H3BO3 Brine

Satu

Sulfuric Acid H2SO4

10 10 30 30 50 50 60 60 70 70 80 80 90 90 98 98

40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

Butadiene 40 104 Gas 80 176 CH2=CH=CH=CH2 Butane 40 Gas 80 CH3(CH2)2CH3 10 40 Nitric Acid 10 80 HNO3 30 40 30 80
104 176 104 176 104 176

50 50 70 70 98 98
Oxalic Acid HOOCCOOH

40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

Toluene C6H5CH3 Chlorine Gas CI2

20 20 50 50 10 10 50 50 80 80 15 15 30 30 50 50 70 70

Wet 40 104 Wet 80 176 Dry 40 104 Dry 80 176

Phosphoric Acid H3PO4

Chromic Acid H2CrO4

10 10 20 20 40 40 50 50

40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

Sodium Hydroxide

NaOH

Hydrochloric Acid HCI

15 15 25 25 35 35 38 38

Excellent
Chemical Concentration Temp

Good
Plastic

Fair

Corroded 304 316

Rubber Stainless

Citric Acid C6H8O7 Gasoline Diesel Fuels Ethyl Alchol C2H5OH Formic Acid HCOOH Hydrofluric Acid
HF

10 10 10 10

PVC PP PVDF PTFE NBR BC 40 104 80 176


40 104 80 176 40 104 80 176

Pure 90

40 104 80 176 40 104 80 176

Dilute 40 104 Dilute 80 176 30 30 40 40 50 50 5 5 20 20 30 30 50 50 90 90


40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

Hydrogen peroxide H2O2

Isopropyl Alcohol 40 104 Pure (CH3)CHOH 80 176 Kerosene Methyl Alcohol CH3OH Methyl Ethyl Ketone CH3COC2H5 Potassium Chromate K2CrO4
40 104 80 176 40 104 80 176 40 104 80 176 40 104 80 176

REED SWITCH PROTECTION

4 INDUCTIVE LOADS
When using reed switches for inductive loads such as motors, relay coil, solenoids, etc., the contact points will sometimes be subjected to high voltages. Such high induced voltages may damage the reed switch or significantly reduce its life. Therefore, circuit protectors such as: RC snubbers, varistors or clamping diodes are recommended. (see Fig. 4a, Fig. 4b, Fig. 4c)
H

2 C= I (uF) 10 R= E E 10I(1+ 50 )

AC C N (RC) Fig. 4 (a) R

4 Do not directly connect the solenoid valve,motor


or magnetic switch.

H AC N
(Varistor) Fig. 4 (b)

F DC G (Diode) Fig. 4 (c)

4 CAPACITIVE LOADS
When using reed switches for capacitive loads such as capacitors, incandescent lamps or long cables, the contact points will be subjected to electrical surges.Therefore, protective circuits such as: surge suppressors or current limiting resistors are recommended. (Fig. 5a, Fig. 5b) Therefore, circuit protectors such as: RC snubbers, varistors or clamping diodes are recommended (Fig. 5a, Fig. 5b)

C E(V) R Fig. 5 (a) E(V)

Fig. 5 (b)

FLOAT SPECIFICATIONS
MODEL
A

TYPE

fAxBxfC

S.G.

Max. Pressure Weight 2 (kg/cm ) (g) 10 12 10 12 35 30 30 25 15 15 30 4 4 5 4 4 4 ATM ATM ATM ATM ATM ATM ATM 8 37.6 165 22.9 19.5 33.4 102.4 8 249.7 534 8.1 3.5 5 35.5 3.7 4 1.82 3.5 6.7 2.7 3.3 2.4 2.5 11.5

Material/Color

Max. Temp. (LC) 200 200 200 200 200 200 200 200 200 200 200 80 80 80 80 80 80 80 80 100 100 100 100 100

S1
B

28x28x9.5 45x55x15 75x108x20 38x50x15 41x38x11 52x52x15 75x73x20 30x28x9.5 100x100x20 150x150x30 28x32x9.5 25x15x10 25x25x10 48x45x18.5 20x25x10 20x20x8.1 18.2x15.3x7.2 20x20x7.5 25x25x8.8 25x15x10 18.5x26x10 19x20x10 17.5x25x10 30x45x12.8

E>0.7 E>0.65 E>0.5 E>0.62 E>0.7 E>0.55 E>0.7 E>0.82 E>0.5 E>0.45 E>0.82 E>0.65 E>0.55 E>0.6 E>0.7 E>0.75 E>0.8 E>0.75 E>0.7 E>0.5 E>0.7 E>0.55 E>0.65 E>0.5

SUS 304 / 316L SUS 316 SUS 304 SUS 316L SUS 316 SUS 316 SUS 316 SUS 304 / 316L SUS 304 SUS 304 SUS 316

S3 S6 S13 S2 S4

S5
B

S7 S8 S9 S11 P1

P2 P3 P4

white black white PP / black PP /


PP / black

PP /

C (Hollow)

white black

P5 P8 Q6 Q7

PP / white PP / black PP / white PP / white NBR / black NBR / black NBR / black NBR / black NBR / black

N1
B

N2 N3 N4 N5

C (Foam)

F2
B

42x44x14 45x45x20 48x62x18

E>0.63 E>0.65 E>0.8 5

5 5 5

18.5 35.7 65.3

PP PP PVDF

80 80 120

F3 F4

(Hollow)

STAINLESS STEEL SWITCHES


FD MH50/ 56 FD MH50A /56A FD MH50C /56C

110 Lead wire: 300mm f17 9 16 47


Lead wire: 2m

110
f17

110
f17

9 16

47

33

9 16

47

32
35B 51
35B

Hex26 1/2"PT

Hex26 1/2"PT

Hex26 1/2"PT

35B

FD MH60/ 66

FD MH60A/ 66A

51

FD MH60C/ 66C

136 f17 9 16

136 f17 75
Lead wire: 9 16 2m

136 f17
36B

36B

36B 68

68

4 SPECIFICATIONS
Type FDMH50/56 FDMH60/66 Material Switching Switching Switching Capacity Voltage Current Max. Max. Max. 0.5A 0.5A 0.5A Carry Current Max. 1A 1A 1A Lead Wire XLPE or TEFLON XLPE or TEFLON XLPE or TEFLON Max. Pressure 5 kg/cm2 5 kg/cm2 5 kg/cm2 Operating Temp. Suitable Sp. Gr.

SUS 304 240Vac 50W/SPST 200Vdc SUS 316L

-20~120LC FDMH5:0.92 (Max.200LC) FDMH6:0.75 80LC -20~120LC FDMH5:0.92 FDMH6:0.75 FDMH5:0.92 FDMH6:0.75

FDMH50A/56A SUS 304 240Vac 50W/SPST FDMH60A/66A SUS 316L 200Vdc FDMH50C/56C SUS 304 240Vac 50W/SPST FDMH60C/66C SUS 316L 200Vdc

68

Hex26 1/2"PT

Hex26 1/2"PT

32

Lead wire: 300mm

75

33

9 16

75

Hex26 1/2"PT

51

HOW TO ORDER SINGLE SWITCHES

FDMH 5 0
Type
5: f17x47L (SG: 0.92) 6: f17x75L (SG: 0.75)

B R ( 0 5 F)

Material
0: SUS304 6: SUS316L

Connection
G : without

A: M12

C: DIN

Connector M12 whose standard wire length is 2M Connector M12 whose wire is endurable with oil and made of PVC / PUR, Max.Temp: 80BC

Connecting Type
BR:1/2"PF BQ: 1/2"PT BU: 1/2"NPT BT: 1/2"BSP

Lead wire Length (Unit=100mm)


05: 500mm (below 500mm) 10: 1000mm (501~1000mm) 15: 1500mm (1001~1500mm) 500mm per Unit 300mm (Standard length)

Material of Lead wire


F: SILICON (150LC) AWG24 X f4 T: TEFLON (200LC) AWG24 X: XLPE (125LC) AWG22 (Standard) Material of Wetted parts"SUS304"

MARINE LEVEL SWITCHES

FDMRN5A0B

FDMRN5B0B

FDMRN5COB

FDMRN5D0B

f17.2 50

f20 50

f15 50

f27.2 50

f30 134 45 45

f30 134 45

f30 134 45

f30 134

M10 Nut

M10 Nut

M10 Nut

M10 Nut

4 SPECIFICATIONS
Type
FDMRN5A0B

Material

Switching Switching Switching Capacity Voltage Current Max. Max. Max. 0.5A 0.5A 0.5A

Carry Current Max. 1A 1A 1A

Lead Wire M12, 2 meter PVC,22 AWG

Max. Pressure ATM ATM

Operating Temp. Max. 80LC Max. 80LC Max. 100LC Max. 80LC

Suitable Sp. Gr. 0.5 0.5 0.5 0.5

SUS 304 240Vac 50W/SPST 200Vdc (Float:NBR) SUS 304 240Vac 50W/SPST (Float:NBR) 200Vdc SUS 304 240Vac 50W/SPST (Float:NBR) 200Vdc SUS 304 240Vac (Float:NBR) 50W/SPST 200Vdc

FDMRN5B0B FDMRN5C0B FDMRN5D0B

Silicon DIN 43650

ATM ATM

0.5A

1A

MARINE LEVEL SWITCHES

FDMRN8A0B

FDMRN8B0B

FDMRN8C0B

FDMRN8D0B

f17.2 50

f20 50

f16 50

f27.2 50

f30 32

112 32

f30

112 32

f30

112 32

f30

112

4 SPECIFICATIONS
Type
FDMRN8A0B

Material

Switching Switching Switching Capacity Voltage Current Max. Max. Max. 0.5A 0.5A 0.5A

Carry Current Max. 1A 1A 1A

Lead Wire M12, 2 meter PVC,22 AWG

Max. Pressure ATM ATM

Operating Temp. Max. 80LC Max. 80LC Max. 100LC Max. 80LC

Suitable Sp. Gr. 0.7 0.7 0.7 0.7

SUS 304 240Vac 50W/SPST 200Vdc (Float:NBR) SUS 304 240Vac 50W/SPST (Float:NBR) 200Vdc SUS 304 240Vac 50W/SPST (Float:NBR) 200Vdc SUS 304 240Vac (Float:NBR) 50W/SPST 200Vdc

FDMRN8B0B FDMRN8C0B FDMRN8D0B

Silicon DIN 43650

ATM ATM

0.5A

1A

4 FDB-0450 PARTS OF SLOSH SHIELD

Stator

Acrylic for case Upper/Lower

Acrylic cover

HOW TO ORDER MARINE LEVEL SWITCHES

FDMR N 5
Float Type
N5: f30x45L (NBR) N8: f30x32L (NBR) D:DIN Connection

(0 5 )

Connection Type
A: M12 B,C: Cable
Connector M12 whose standard wire length is 2M Connector M12 whose wire is endurable with oil and made of PVC / PUR, Max.Temp: 80BC

Tube Material
0: SUS304, 6:SUS316L

Contact Form
A: Normal open(N.O.) B: Normally closed(N.C.)

Lead wire Length (L)


05: 500mm (01~500mm) 10: 1m (501mm~1m) 15: 1.5m (1.01~1.5)
FDMRN59A0 A TYPE B TYPE

500mm per Unit 300mm (Standard length) 2M is standard length of lead wire for ASI connection

FDMRN59B0

FDMRN59C0

FDMRN59D0

FDMRN89C0

C TYPE

D TYPE

C TYPE

10

STAINLESS STEEL MODELS


FD 3091/ FD 3591 FD 4091 FD 4591

Lead wire: 300mm 1/8" PF

Lead wire: 300mm 1/8" PF 29 8

Lead wire: 300mm 3/8" PF 18 11 Hex21 Hex21 88 38 7 70 55

Lead wire: 300mm 3/8" PF 18 11 108 f45 90

5 5 Hex 17

15

5 5 Hex 17 60

15

60 28 45

28

45

5 f8 f28 f8 f30 f 9.5 f 41 M4x0.7

5 f12.7 M4x0.7

Washer: NBR Drill hole f10mm

Washer: NBR Drill hole f17mm

Washer: NBR Drill hole f17mm

FD 3092

FD 4092

FD 4592

60 45

Lead Wire 300mm


1/8"PF

98 80 Lead Wire 300mm

118 100

Lead Wire 300mm

Hex21
Hex 21 100 3/8"PF 8

Hex 17

3/8"PF

125
51

75 6

7
28 36

55

71

38

5
f8 f28

5 f9.5 f41 M4x0.7

f12.7 f45

M4x0.7

Washer: NBR Drill hole f10mm

Washer: NBR Drill hole f17mm

Washer: NBR Drill hole f17mm

11

METAL TYPES
FD 5091 FD 5092 FD 7591

Lead wire: 300mm Lead wire: 300mm 3/8" PF 8 Hex21 3 52 82 11 Hex21 100 125 3 52 5 f12.7 f52 M4x0.7 5 f12.7 f 52 M4x0.7 f17.2 f 75 70 105 73 8 3/8" PF Hex27 135 18 118 100 1/2" PF Lead Wire 300mm 10 9 30

Washer: NBR Drill hole f17mm

Washer: NBR Drill hole f17mm

Washer: NBR Drill hole f21mm

4 SPECIFICATIONS
Type Description Switching Capacity Max. Switching Voltage Max. Switching Current Max. (A) Carry Current Max. (A) Lead Wire Reversible Switch Action Max. Pressure (Kg/cm2) Operating Temperature Material Suitable Specific Gravity 0.7 0.7 10 0.5A 1A

FD3091D FD3092D
50W SPST

FD4091D FD4591D FD4092D FD4592D


50W SPST 50W SPST

FD5091D FD5092D FD7591G


50W SPST

FD1091G

60W SPDT 220Vac

240Vac/200Vdc 0.5A 1A 0.5A 1A 0.5A 1A

1A

2A

XLPE (UL3266, AWG22) YES / below 80LC, NO / UP 80LC 30 12 30 NO 30 NO 10

-20~120LC (OPTION 200LC) Stainless Steel SUS304, 316 0.65 0.55 0.55 0.5

12

ORDERING METAL SWITCHES

FD 3 0 6
Order No./ Model
10 Float : f75x108, Screw : 1/2"PF 30 Float : f28x28, Screw : 1/8"PF 31 Float : f28x28, Screw : 1/8"NPT 35 Float : f30x28, Screw : 1/8"PF 36 Float : f30x28, Screw : 1/8"NPT 40 Float : f41x38, Screw : 3/8"PF 45 Float : f45x55, Screw : 3/8"PF 50 Float : f52x52, Screw : 3/8"PF 75 Float : f75x70, Screw : 1/2"PF

2 D A (1 0

H)

Material of Wetted parts


0 : SUS304 6 : SUS316

Mounting
1 : Top or Bottom Mounting 2 : Side Mounting

Switching Capacity Max.


D: 50W 240Vac /200Vdc SPST F : 10W 125Vac SPST G: 60W 220Vac SPDT (only use for tude f17.2) S: Others

Contact Mode
A: Normally Open (N.O.) SPST B: Normally Closed (N.C.) SPST C: 1C SPDT D: N.C. Reversible E: N.O. Reversible High Temperature only available for A or B Type

Lead wire Length (Unit=100mm)


05: 500mm (below 500mm) 10: 1000mm (501~1000mm) 15: 1500mm (1001~1500mm) 500mm per Unit 300mm (Standard length)

Material of Lead wire


B: PVC cable (80 LC) C: PVC cable (80LC) D: XLPVC (105LC) F : SILICON cable (150LC) P : PVC (80LC) T : TEFLON (200LC) X : XLPE (125LC) ---------------------AWG24 AWG22 X f4 f8 Stem is not suitable. AWG22 AWG24 X f4 AWG22 AWG24 AWG22 (Standard)

High Temp. (200LC)


13

PLASTIC OH MODELS
FCH11QD 4 Installation / N.C./ N.O. Action Position

Drill hole f12.5mm

Wall Thickness Max. 5mm

Normally open N.O.


54 Hex21 Lead Wire 300mm 97 f31 M12x1.25 6.5 Magnet 18 31

Normally closed N.C. Reed Switch Magnet

8mm 8mm Reed Switch Magnet


25

Washer: NBR

1 All the products in this range come with UL E161587 approval. 1 All the products in this range are designed to be side mounted.

4 SPECIFICATIONS
Description Type

1 Waters specific gravity is used as the reference point for calculations. FCH21PD FCH31PD FCH23FD FCH33FD
50W SPST 240VAC / 200Vdc 0.5A 1A PVC AWG22 ATM 4 kg/cm2 -20~80LC PP 0.6 25 g 0.65 H21: 22 g H31: 21 g PVDF 0.85 25 g XLPE AWG22 2 kg/cm2 -20~120LC Nylon 0.8 23 g Polysuphone 0.85 25.4 g

FCH11QD

FCH24YD FCH34YD

FCH25GD FCH35GD

Switching Capacity Max. Switching Voltage Max. Switching Current Max. (A) Carry Current Max. (A) Lead Wire Max. Pressure (Kg/cm2) Operating Temperature Material Suitable Specific Gravity Weight

14

PLASTIC OH MODELS
FC H21PD / H31PD
1 FCH2 and FCH3 models are available in PP, Nylon, and PVDF. 1 Special lead wire/cable are available on request. 1 Different reed switches are available for selection. 1 For standard design specifications see catalog (p14). 1 OEM designs are welcome.

4 Optional FC H21PDO(Round)
PP Washer 90 52

4 Installation / N.C. / N.O. Action Position [ External mounting ]


@ 23B

Lead Wire 300mm

Arrow Downward Normally Closed

27.5

M16 Hex24 EPDM Parking

45

B
43

f21

f1

Drill hole f21+0.2 mm

N.C. function, i.e. the contact opens when the liquid level rises.
Max. 6mm

4 Standard FC H21PDD (Hexagon)


Washer Lead Wire 300mm
NBR

7.

[ Internal mounting ]
90 52

Arrow Upward Normally Open

(Option)

Hex22

f1 7.

PP washer

M16 Hex24 EPDM Parking

43 Drill hole f16mm

@1 7B
7

45

22.5

N.O. function - the contact point closes when the liquid level rises.

4 FC H31PD
Hex18 Lead Wire 300mm 97.5 59.5

[ External mounting ]

f1 7. 5

45

1/2"PT

43

20

15

PLASTIC OH MODELS
FC H41PD / H51PD
4 Installation / N.C. / N.O. Action Position
OFF ON

ON OFF

4 FC H41PD
102 10 Lead Wire 300mm 18
5B @1
35 B @

f17.5

25

Hex18 1/2"PT

10

42

20

10

N.O. function, i.e. the contact closes when the liquid level rises.

4 FC H51PD
118
@ 20

16 Lead Wire 300mm

10

18

30

f17.5
B

Hex21 1/2"PT

42

20

10

N.C. function, i.e. the contact opens when the liquid level rises.

4 FC H61PD
Lead Wire: 300mm

M16x2

20

f21

35

3 56 25 42

Hollow Float

f25

4 SPECIFICATIONS
Type FCH41PD FCH51PD FCH61PD Switching Switching Switching Carry Material Capacity Voltage Current Current Max. Max. Max. Max. PP 50W/SPST 240Vac 200Vdc 0.5A 1A Lead Wire XLPE PVC Operating Suitable Max. Sp. Gr. Pressure Temp. 4 kg/cm2 -20~80LC 0.55 Weight 20g 25g 31g

35

16

PLASTIC OV MODELS
FC V11QF FC V21QD FC V31PD FC V33FD, 34YD, 35GD

Lead Wire: 300mm 1/8" PF 5 Hex17 Magnet Foam Float material: PP 20 41 56 15 1/8" PF 5 Hex20 Magnet Foam Float material: PP

Lead Wire: 300mm 1/8" PF 11 5 Hex17 Magnet

Lead Wire: 300mm 1/8" PF 11 5

Lead Wire: 300mm

11

41 25

52

44 Hollow Float 25

55

Hollow Float Magnet 26.8

44

55

f 6.5 f 20

f8 f 25

f8 f 25

f8 f 25

Washer: NBR Drill hole f10mm

Washer: NBR Drill hole f10mm

O-ring: VITON Drill hole f10mm

O-ring: VITON Drill hole f10mm

4 SPECIFICATIONS
Description Type

FC V11QF FC V21QD
10W SPST 125Vac 0.5A 1A UL 1007 AWG22 PVC 50W SPST 240Vac / 200Vdc

FC V31PD FC V33FD FC V34YD FC V35GD


50W SPST 240Vac / 200Vdc 0.5A 1A UL 1007 AWG22 PVC YES/ 80LC down XLPE AWG22

Switching Capacity Max. Switching Voltage Max. Switching Current Max. (A) Carry Current Max. (A) Lead Wire Reversible Switch Action Max. Pressure (Kg/cm2) Operating Temperature Material Suitable Specific Gravity Weight (g)

ATM -20~80LC PP 0.75 12 g 0.7 18 g

4 kg/cm2 -20~80LC PP 0.55 12.8 g PVDF 0.85 18 g

2 kg/cm2 -20~120LC Nylon 0.8 15 g Polysuphone 0.75 18 g

17

PLASTIC OV MODELS

FC V11NF

FC V41PD, V41QD

FC V61PF, V61NF
Lead Wire: 300mm 1/8" PF

11

96 Lead Wire: 300mm 1/8" PF M16x2 5 15 Hex24 33 Hex17 Magnet Foam Float material: NBR EPDM Parking 56 41 20 Magnet V41PD: Hollow Float material: PP V41QD: Foam Float material: PP f 25 25 48 81 f25 15 24 Lead Wire: 280mm

127

f 6.5 f19

V61PF: Hollow Float Material: PP V61NF: Foam Float Material: NBR

Washer: NBR Drill hole f10mm

Washer: NBR Drill hole f16mm

Washer: NBR Drill hole f10mm

FC V81PD

FC V41ND

FC V51PD

Lead Wire: 300mm


M16

Lead Wire: 280mm M8 M16x2 Hex13

8 Hex25 Magnet

25 10 102 77 45

12.5 5

33 Hex24 Magnet Foam Float material: NBR 81 Hollow Float material: PP 26 48 15.3 26

43.5

Hollow Float material: PP

f 15 f 48

f18.5

f18.2

Washer: NBR Drill hole f16mm

Washer: NBR Drill hole f16mm

O-Ring: VITON Drill hole f8.5mm

18

PLASTIC OV MODELS
4 SPECIFICATIONS
Type Description
Switching Capacity Max. Switching Voltage Max. Switching Current Max. (A) Carry Current Max. (A) Lead Wire Reversible Switch Action Max. Pressure (kg/cm ) Operating Temperature Material Suitable Specific Gravity
Weight (g)
2

FC V11NF

FC V61PF FC V61NF

FC V41PD FC V41QD

FC V81PD

FC V41ND FC V51PD

10W SPST 125Vac (Break Down 250Vac) 0.5A 1A XLPE AWG22 NO ATM NO V61P: 4kg/cm V61N: ATM
2

50W SPST 240Vac / 200Vdc

UL 1007 AWG22 PVC YES V41P: 4kg/cm V41Q: ATM -20~80LC


2

NO 4 kg/cm2

NO ATM

NO 4 kg/cm2

80LC

PP (except V11N, V61N, V41N: NBR float)


0.55 11 g 0.65 0.5 16 g 0.55 0.7 23 g 0.6 180 g 0.7 17 g 0.8 8.2 g

FCV2

FCV4

FCV1

FCH2 FCV6

FCH1

19

HOW TO ORDER PLASTIC OH/OV MODELS

FC V 2 3
Order No./ Model
FC H1~H6 Side Mounting FC V1~V9 Top or bottom Mounting

F D A ( 0 5 P)

Material of Wetted parts


1 : PP 3 : PVDF 4 : Nylon 5 : Polysuphone 6 : PPS

Material of Float
F : PVDF P : PP (hollow) K : PPS N: NBR Q: PP (foam) G :Polysuphone Y : Nylon (Unsuitable for immersion in water for long persisting periods)

Switching Capacity Max.


D : 50W 240Vac /200Vdc SPST F : 10W 125Vac SPST K : 20W 150Vac/200Vdc SPDT

Contact mode
A: Normally Open (N.O.) SPST B: Normally Closed (N.C.) SPST D: NC Reversible E : NO Reversible FCV119DD & FCV119DE are unavailable for reversible option. Side mounted types are only available with D mode.

Lead wire Length (Unit=100mm)


05: 500mm (below 500mm) 10: 1000mm (501~1000) 15: 1500mm (1001~1500) 500mm per Unit 300mm (Standard length)

Material of Lead wire


B: PVC (80LC) C: PVC cable (80LC) D: XLPVC (105LC) F : SILICON cable (150LC) P : PVC (80LC) T : TEFLON (200LC) X : XLPE (125LC) S : Others ---------------------AWG24 AWG22 X f4 AWG24 AWG24 X f4 AWG22 AWG24 AWG22 For FCH61, cable length could be selected, but material cant.

"A" (Normally Open, SPST) is our standard specified switch. For further details about the lead wire please refer pages 6, 7, 9, 10and 12.

20

CUSTOMIZED PLASTIC MODELS


FC PV1 FC PV2 FC PV3

PVC Lead Wire: 300mm 1/8" PF 11 5


NO NC

PVC Lead Wire: 300mm 1/8" PF 11

PVC 1/8" PF 5 Hex20 Magnet

Lead Wire: 300mm

5 Hex20 Magnet Foam Float material: PP

11

Hex20

NO

NO NC

25
2

25 120
NC
NO NC

120 120

Magnet Foam Float material: PP 25

Foam Float material: PP

f8 f 25

f8 f 25

f8 f 25

O-Ring: VITON

O-Ring: VITON

O-Ring: VITON

1 NOTE: Float materials are optional. The above items are custom-built when client demands are unique. The benefits are listed below: 1 FCPV1 One float for one level activation. FCPV2 One float with 2 reed switches. 1 Applicable for conditions where 1 float can actuate switches at high and low levels. 1 FCPV3 Two floats actuate two independent reed switches: Each float units default setting can be either N.O. or N.C. as per cus

21

HOW TO ORDER PLASTIC SWITCHES

FC P V 1 2 D A ( 0 5 P )
Order No./ Model
PV1: Vertical Mounting, Single Float Single Switch PV2: Vertical Mounting, Single Float Dual Switch PV3: Vertical Mounting, Dual Float Dual Switch

Material of Wetted parts


1 : PP; Lead wire---PVC---Temp. 80LC 2 : NBR (only float); Lead wire---PVC---Temp. 60LC Lead wire---XLPE---Temp. 100LC 3 : PVDF; Lead wire---XLPE---Temp. 125LC 4 : Nylon; Lead wire---XLPE---Temp. 125LC (Unsuitable for immersion in water for long persisting periods)

Switching Capacity Max.


D: 50W 240Vac /200Vdc SPST F : 10W 125Vac SPST K: 20W 150Vac/200Vdc SPDT

Contact Mode
A: Normally Open (N.O.) SPST B: Normally Closed (N.C.) SPST C: SPDT F: 1 float 2 points. H: 1-N.O.,1-N.C.(2 floats)

Lead wire Length (Unit=100mm)


05: 500mm (below 500mm) 10: 1000mm (501~1000mm) 15: 1500mm (1001~1500mm) 500mm per Unit 300mm (Standard length)

Material of Lead wire


C: PVC cable (80LC) P : PVC (80LC) X : XLPE (125LC) ---- AWG22 X f4 ---- AWG22 (Standard) ---- AWG22

22

CUSTOMIZED PLASTIC MODELS

Items below are custom-built models for special applications or placement on existing facilities. Their unique characteristics are as follows: 1 Any size measuring range, but f8mm stem Max. 500mm.

1 Customized mounting thread specifications are acceptable. 1 Single or multiple contact points are workable. 1 Switch activation N.O. or N.C. choices are available.

FDSA911
Lead Wire: 300mm

FDSB911
Lead Wire: 300mm 1/8" NPT

FDSC911
Lead Wire: 300mm M12xP1.25 10 15

1/8" PF 15 5 Hex17
NO NC NO NC
1

1
mm

mm

L
mm

L
mm

NO NC

mm

L
mm

28

28

28

f8 f 28

f8 f 28

f8 f 28

Washer: NBR

Washer: NBR

Washer: NBR

FDSA912
Lead Wire: 300mm
5 1/8"PF Hex17 15
NO NC
1

FDSA921
60 45 Lead Wire 300mm
1

FDSA922
X(min=45mm)

Hex17 1/8" PF Lead Wire 300mm

mm

Hex17
1

1/8" PF

mm

NO NC

5 15

NO NC

L L
mm mm

mm

NO NC

L
mm
2

mm

f8

mm

NO NC

28 6 28

28

f8 f 28 f 28

f8 f 28

Washer: NBR

Washer: NBR

Washer: NBR

23

CUSTOMIZED STAINLESS STEEL MODELS

Items below are custom-built models for special application and location on existing equipment facilities. Their unique characteristics are as follows: 1 Any size measurement range available.

1 Customized mounting thread specification are acceptable. 1 Single or multiple contact form (point) are workable. 1 Switch activation N.O. or N.C. are available.

FDSD911
Silicon cable 1M

FDSE911
Silicon cable 1M 3/8" PF

FDSF911
Silicon cable 1M

18

2"PT
NO NC
1

2"PF
NO NC
1

NO NC

mm

mm

L
3 52 5 f 12.7 f52 M4x0.7 f 12.7
mm

mm

L
mm

L
3 52 5
mm

f 45 55

5 M4x0.7

f 12.7 f52

M4x0.7

Washer: NBR

Washer: NBR

Washer: NBR

FD4503D
PVC Cable

FD5003G
PVC Cable

FD7503G
PVC Cable

2"PF
1

2"PT
1

3"PT
1

L
f 45 55 52 3

L
73

f 12.7

f 12.7 f52

f 17.2

Washer: NBR

Washer: NBR

Washer: NBR

24

HOW TO ORDER CUSTOMIZED STAINLESS STEEL MODELS

FD S A 6 1
Type
FDSA Float : RF-SA f28x28, Screw : 1/8"PF FDSB Float : RF-SB f28x28, Screw : 1/8"NPT FDSC Float : RF-SC f28x28, Screw : M12 FDSD Float : RF-SD f52x52, Screw : 2"PT FDSE Float : RF-SE f45x55, Screw : 2"PF FDSF Float : RF-SF f52x52, Screw : 3/8"PF

2 D A 0 5

Material of Wetted parts


0 : SUS304 6 : SUS316

Mounting
1 : Top or Bottom Moun ting 2 : Side Mounting

Float Number
1~4 floats

Switching Capacity Max.


D: 50W 240Vac /200Vdc, SPST G: 60W 220Vac, SPDT (only use for tube ]f12.7) K: 20W 150Vac /200Vdc, SPDT

Contact Form
A: Normal Open (N.O.) SPST B: Normal Close (N.C.) SPST C: 1AB SPDT F : 1 float 2 points H: 1-N.O.,1-N.C.(2 floats)

Lead wire Length (Unit=100mm)


03: 300mm (SA, SB, SC, Standard length) 05: 500mm (below 500mm) 10: 1000mm (SD, SE, SF, Standard length) 15: 1500mm (1001~1500mm) 500mm per Unit

Material of Lead wire


C: PVC cable (80LC) P : PVC (80LC) T : TEFLON (200LC) X : XLPE (125LC) ---- AWG22 X 2C X f4 ---- AWG22 For SA, SB, SC Type ---- AWG24 ---- AWG22 (Standard) F : SILICON cable (150LC) ---- AWG24 X 2C X f4

25

TYPICAL WIRING DIAGRAMS

Supply water

N.O.

N.C. LOW LEVEL R1

R2

R2

AUTO SUPPLY CASE: SINGLE FLOAT DUAL SWITCHES

N.O.! N.C.!

HI LEVEL

R1

R2 Relay 2 Solenoid valve

N.O.! N.C.!

Relay 1

N.C.

N.O. HI LEVEL R1

R2

R2

AUTO DRAIN CASE: SINGLE FLOAT DUAL SWITCHES


Drain water

N.O.! N.C.!

LOW LEVEL

R1

R2 Relay 2 Solenoid valve

N.O.! N.C.!

Relay 1

Supply water

AUTO SUPPLY CASE: DUAL FLOATS DUAL SWITCHES

N.O.! N.C.!

LOW LEVEL HI LEVEL

N.C. R1

R1

N.C.

N.O.! N.C.!

R1 Relay 1 Solenoid valve

HI LEVEL

N.O. R1

R1

AUTO DRAIN CASE: DUAL FLOATS DUAL SWITCHES


Drain water

N.O.! N.C.!

LOW LEVEL

N.O.

N.O.! N.C.!

R1 Relay 1 Solenoid valve

26

[FC/FD] [FG] [FF] [FA/FB] [SP] [SF] [SD] [SE] [SA] [EC] [LR] [SC] [SC] [EB] [SB] [EG] [EF] [MEF] [EA] [JFR] [EE]

Mini Float/Magnetic Float Level Switch


[PB]

Magnetic Float Level Transmitter Side Mounting Float Switch Cable Float Level Switch Thermal Dispersion Flow Switch Paddle Flow Switch Optical Level Switch Rotary Paddle Level Switch Capacitance Level Switch Pressure Level Transmitter Loop Power Indicator Vibrating Probe Level Switch Tuning Fork Level Switch RF-Capacitance Level Transmitter RF-Capacitance / Admittance Level Switch Magnetostrictive Level Transmitter By-Pass Level Transmitter Mini By-Pass Level Transmitter Ultrasonic Level Transmitter FMCW Radar Level Transmitter Electromechanical Level Measuring System
[SE] [SB] [SC] [EB] [SB] [EF] [EB] [FA/FB] [EG]

[EA]

[LR] [EB] [EC] [FG] [JFR] [FC/FD] [SB]

[SC] [SA]

[FF] [SF]

[SD] [EA] [SE]

[FC/FD]

[SP] [PB/PM]

[EE]

[SC]

[JFR] [EB]

[SA]

[SC]

[ED]

Speed Monitor

[SRT/SRS] Conveyer Belt Misalignment Switch & Safety Cable Pull Switch Microprocessor Based Bargraphic Display Scaling Meter [BAS/ Valve and Controller for Dust Collector System BAH/BVP] [BAS/BAH/BVP] Air Hammer [BRD/AE] [BVK/BVR/BVT] Pneumatic Vibrator [PB/PM]
[BVK/ BVR/BVT]

FineTek Co., Ltd.


No.16, Tzuchiang St., Tucheng Industrial Park, New Taipei City 236, Taiwan. TEL: 886 2 2269 6789 FAX: 886 2 2268 6682 Email: info@fine-tek.com http://www.fine-tek.com

Taichung Branch TEL: 886 4 2337 0825 FAX: 886 4 2337 0836 Tainan Branch TEL: 886 6 289 0635 FAX: 886 6 289 4073 Kaohsiung Branch TEL: 886 7 333 6968 FAX: 886 7 536 8758

Fine automation (ShangHai) Co., Ltd.


No.451 DuHui Rd, MinHang District, Shanghai, China 201109 TEL: 86 21 6490 7260 FAX: 86 21 6490 7276 Email: info.sh@fine-tek.com

FineTek Pte Ltd.


No. 60 Kaki Bukit Place, #07-06 Eunos Techpark 2 Lobby B, Singapore 415979 TEL: 65 6452 6340 FAX: 65 6734 1878 Email: info.sg@fine-tek.com
Distributor:

FineTeK GmbH
Frankfurter Str. 62, OG D-65428 Ruesselsehim, Germany TEL: 49 6142 17608 0 FAX: 49 6142 17608 20 E-Mail: info@fine-tek.de

Aplus Finetek Sensor inc.


355 S. Lemon Ave, Suite D, Walnut, CA 91789 Tel : 1 909 598 2488 Fax : 1 909 598 3188 Email: peter.wu@aplusfine.com
08-FC-B0-EP, 04/23/2013

Você também pode gostar