Você está na página 1de 1

Clifford & Snell

Manual Call Points Yodalex ATEX


MAIN FEATURES

Tom Cribb Road, Thamesmead, London SE28 0BH Tel: +44 (0)20 8316 4477 or (0)20 8317 1717 Fax: +44 (0)20 8317 2400 Email: sales@cliffordandsnell.com Web Site: www.cliffordandsnell.com

Break Glass and Push Button Call Point Station Light Weight Glass Reinforced Polyester (GRP) Ex d Enclosure Dual 20mm gland entries, one fitted with approved stopping plug (2 * M20 holes located at the top of the Call Point. Glands supplied separately) Monitoring facility (DC only) Weather resistant high performance red paint finish as standard High intensity Red LED can be fitted as an optional extra to indicate operation. Available up to 24Vdc Meets the requirements of BS EN 54-11 Break Glass version - Optional stainless steel Lift Flap Test Key provided as standard Push Button version - Push to operate - Reset Key provided. Protection Flap as standard Stainless steel fixings

DIMENSIONS (mm)
A B

TECHNICAL SPECIFICATION
IP 66 rated Weight Relative Humidity Cetified Temp Voltage Approx. 1Kg 95% @ 40 degC 55C to +70C Up to 250V 5A (resitive) or 3A (Inductive) 1A resitive or inductive 5A resistive or inductive

Break Glass (BG)

132.5 (5.2)

Switch Ratings DC 12 - 30V 30 - 50V AC 12 - 250V Suitable for Zones 1 & 2

74 (2.9)

Up to 4 cable entries. Top Entries 2 * as standard. Internal earth continuity provided as standard 7 way 2.5mm terminal block mounted on a PCB. Single Pole change over switch supplied as standard and fitted directly onto the 7 way connector.

Push Button (PB)

MOUNTING
132.5 (5.2) 98 (3.9) Via holes through the Back Box. See Installation Instructions.

CONFIGURATOR
Unit type Break Glass Push Button Switches Single Pole Double Pole
(Suffix A = AC or D = DC. Example SPD = single pole dc switch)

APPROVAL SPECIFICATION
Standards for Manual Call Points European Standards (ATEX)
EN60079-0:2006 & EN60079-1:2007 EN61241-0:2004 & EN61241-1:2004 Break Glass Push Button Baseefa08ATEX0269 Ex II2 GD Ex tD A21 (Tamb 55C to +70C) Baseefa08ATEX0269 Ex II2 GD EX tD A21 (Tamb 55C to +70C)

Explosion Proof Entries 2 * M20 top entries A+Bstandard


(For other options select position of entries and list required

International Standards (IECEx)


IEC60079-0:2004 Edition 4 & IEC60079-1:2007 Edition 6 IEC61241-0:2004 Edition 1 & IEC61241-1: 2004 Edition 1 Break Glass Push Button IECEx BAS 08.0089 Ex II2 GD Ex tD A21 (Tamb 55C to +70C) IECEx BAS 08.0089 Ex II2 GD Ex tD A21 (Tamb 55C to +70C)

Finish Additional Options


(User to specify resistor & diode values)

Red (standard). (Other options upon application) Lift FLap End Of Line Resistor In line Resistor IN Line & EOL resistor Duty Label (Customer to specify wording) Tag Label (Customer to specify wording)
Controlled document No.D7489-01-02 (CN100301) \\My Documents\SALES DATA\data

LED Labels

Clifford & Snell a division of Signature Industries Ltd part of the Digital Angel Corporation

Você também pode gostar