Escolar Documentos
Profissional Documentos
Cultura Documentos
INTRODUCTION
Electrically actuated valves along with programmable controllers are widely used in modern day automatic machines. PLC Based Hydraulic Trainer (HP-10) is designed to demonstrate operation of various Hydraulic Circuits with help of PLC Controller. The trainer used different electrically operated hydraulic valves & electronic sensors to demonstrate real life applications of Hydraulic Power.
FEATURES
Designed for studying Hydraulic Circuits & components used in them. Trainer equipped with different Solenoid operated Hydraulic valves & electronic sensors. Self-contained unit complete with hydraulic power pack & oil reservoir.
DESCRIPTION
The trainer consists of a workstation panel for mounting of hydraulic components. The workstation is equipped with a power pack to supply oil under pressure to the components during operation. Two distributors, each for Pressure & Tank port are mounted on the panel. Hydraulic Connections between the components are made using hoses with easy to use Quick Release Couplers. The components supplied along with the trainer include Direction Control Valves (Solenoid Operated & Hand Lever Operated), Pressure Control Valves, Flow control valves, Check Valve, Linear Actuators, and Accumulators etc. Each hydraulic component like valve, cylinder etc is mounted on a mounting plate & has adaptors for making connections using hoses. All the connectors are having Non Return Valves to avoid spillage of oil. INNOVATIVE TECHNO LAB EQUIPMENTS
Address: Plot No. 35, Sector 7, PCNTDA, New Industrial Area, MIDC Bhosari, Pune - 411 026, (M.S.) INDIA. Telefax: +91-20-27130001, Website: www.innovativetechnolab.in, E-mail: sales@innovativetechnolab.in RIGHT TO CHANGE THE INFOMRATION WITHOUT PRIOR NOTIFICATION RESERVED.
EXPERIMENTAL CAPABILITIES
To study Hydraulic Power pack & its components. To study operation of different Hydraulic Direction Control Valves. To study operation of Hydraulic Check Valve. To study operation of Flow Control Valve. To study operation of Pressure Relief Valve. To study operation of Linear Actuators. To test following Hydraulic circuits Regenerative Circuit Speed Control of Linear Actuators Transverse & Feed Circuit To test following PLC based circuits Operation of Electrical Limit Switch Operation of Solenoid operated direction control valves Sequencing Circuit Clamping Circuit Counter Circuit Feed Back Control of Hydraulic Circuits
TECHNICAL SPECIFICATIONS
Hydraulic Power Pack Gear Pump Electric Motor 1hp, 230 V AC Oil Sump Tank 20 Litres Oil Filter Oil Level Indicator 4 Port Manifold, 2 Nos. Inline Type, Range 0-150 Bar Range 0-100 Bar 4/2 Way Valve, Spring Return 4/3 Way Valve, Manual Return Pressure Sequence Valve, Normally Closed Inline Valve One Way Flow Control Valve, Inline Double Acting Cylinder, 40 mm Bore x 100 mm Stroke, 2 Nos. Measuring Jar & Stopwatch 4/2 Single Solenoid Operated DC Valve 4/3 Double Solenoid Operated DC Valve 2 Nos.
Distribution Manifold Pressure Relief Valve Pressure Gauge Direction Control Valves Sequence Valve Non Return Valve Flow Control Valve Hydraulic Cylinder Flow Measurement Solenoid Operated DC Valves
OPTIONAL ACCESSORIES
Cut Sectioned Models of Hydraulic Valves. Charts of Symbols of Hydraulic components
REQUIRED SERVICES
Electric Supply 230 V AC, 6 A, Single Phase, Earthed. Hydraulic Oil: Grade 65, 20 Liters