This document summarizes the specifications of three photovoltaic inverters - the SE3.3Ni, SE3.8Ni, and SE4.6Ni. The inverters have efficiencies above 96%, support a wide range of operating temperatures, include protections against islanding and leakage currents, and allow monitoring of key parameters and remote communication. They are designed for single-phase grids and meet European standards.
This document summarizes the specifications of three photovoltaic inverters - the SE3.3Ni, SE3.8Ni, and SE4.6Ni. The inverters have efficiencies above 96%, support a wide range of operating temperatures, include protections against islanding and leakage currents, and allow monitoring of key parameters and remote communication. They are designed for single-phase grids and meet European standards.
This document summarizes the specifications of three photovoltaic inverters - the SE3.3Ni, SE3.8Ni, and SE4.6Ni. The inverters have efficiencies above 96%, support a wide range of operating temperatures, include protections against islanding and leakage currents, and allow monitoring of key parameters and remote communication. They are designed for single-phase grids and meet European standards.
Broad range of the MPP voltage, thereby allowing great flexibility
when sizing installations.
Energy yield of above 96,3%. Harmonic distortion of less than 3%. Wide range of operating temperatures (from -20C to +55C without derating). High performance Anti-island protection with automatic grid disconnection. Protection against leakage currents. Galvanic separation assured by an Internal Control Unit. Safety Main operating parameters shown on an LCD. Local and remote communications. Communications Fulfils connection requirements for European markets. Other Anti-island protection. Protection against leakage currents. Protection against reverse polarity. Protection against short circuits. Protections 100-450 VDC 500 VDC Maximum DC power MPP Voltage range Maximum voltage range Maximum current Number of MPPTs Maximum number of Strings DC Input 4,5 kWp 5 kWp 20 A (2x10A) SE3.3Ni SE3.8Ni SE4.6Ni 6 kWp 20 A (2x10A) 30 A (3x10A) 1-2 1-2 1-3 2 2 3 AC Output Nominal power Maximum power Maximum effective current Nominal voltage Nominal frequency Harmonic distortion (THD) Power factor Galvanic insulation Number of phases 3,3 kW 3,8 kW 16,52 A 3,8 kW 4,4 kW 19,13 A 230 V~ 50 Hz <3% >0,99 Assured by RCMU* Single phase 4,6 kW 5,1 kW 22 A SE3.3Ni SE3.8Ni SE4.6Ni * RCMU: Residual Current Monitoring Unit. General characteristics IP 65 <1 W Forced ventilation LED / LCD RS232C / RS485 580 x 422 x 182 mm. -20C to +55C (without derating) Maximum 95% MC4 RST25i3 22,5 Kg. 23 Kg. Yield maximum Yield UE Level of protection Own consumption (stand by) Cooling system Display Comunications Dimensions Weight Operating temperature Ambient humidity Type of DC connection Type of AC connection SE3.3Ni SE3.8Ni SE4.6Ni 22,5 Kg. 96,3% 95,1% 95,1% 95,4% 96,3% 96,2% Standard 5-year warranty Inverters SE3.3Ni - SE3.8Ni - SE4.6Ni Single-phase grid-connect inverters J a n u a r y
2 0 1 1 Siliken S.A. Ronda Isaac Peral y Caballero, 14 46980 Paterna - Valencia - Spain Tel.: (+34) 902 41 22 33 Fax: (+34) 96 070 92 65 info@siliken.com www.siliken.com C/ Massamagrell, 40 Pol. Ind LHorteta. 46138 Rafelbunyol - Valencia - Spain MANUFACTURED IN SPAIN Due to our continuous improvement policy, these specifications are subject to change without prior warning. CE Marking. Electrical Safety Directive EN 50178. Electromagnetic Compatibility Directive. EN 61000-6-4: EN 55011 EN 61000-6-2: EN 61000-4-2 EN 61000-4-4 Complies with RD 661/2007, RD 1663/2000, DK 5940 and VDE 0126-1-1. Standards