SPECIFICATIONS and INFORMATION REGARDING the PRODUCTS in this MANUAL are SUBJECT to CHANGE WITHOUT NOTICE. CISCO and the ABOVE-NAMED SUPPLIERS DISCLAIM All WARRANTIES, EXPRESSED or IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE of MERCHANTABILITY, FITNESS for APARTICULARPURPOSE ANDNONINFRINGEMENT or
SPECIFICATIONS and INFORMATION REGARDING the PRODUCTS in this MANUAL are SUBJECT to CHANGE WITHOUT NOTICE. CISCO and the ABOVE-NAMED SUPPLIERS DISCLAIM All WARRANTIES, EXPRESSED or IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE of MERCHANTABILITY, FITNESS for APARTICULARPURPOSE ANDNONINFRINGEMENT or
SPECIFICATIONS and INFORMATION REGARDING the PRODUCTS in this MANUAL are SUBJECT to CHANGE WITHOUT NOTICE. CISCO and the ABOVE-NAMED SUPPLIERS DISCLAIM All WARRANTIES, EXPRESSED or IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE of MERCHANTABILITY, FITNESS for APARTICULARPURPOSE ANDNONINFRINGEMENT or
Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-23776-01 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright
1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FORAPARTICULARPURPOSE ANDNONINFRINGEMENT ORARISINGFROMACOURSE OF DEALING, USAGE, ORTRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at http://cisco.com/ go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R) Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
2010 Cisco Systems, Inc. All rights reserved.
C ONT E NT S Preface v Audience v Document Organization v Document Conventions v Related Documentation for Nexus 7000 Series NX-OS Software vi Obtaining Documentation and Submitting a Service Request vii Managing the FabricPath Feature Set 1 Information About the FabricPath Feature Set 1 Licensing Requirements for the FabricPath Feature Set 1 FabricPath Feature Set Guidelines and Limitations 2 Default Settings for the FabricPath Feature Set 2 Managing the FabricPath Feature Set 2 Installing The FabricPath Feature Set 3 Uninstalling the FabricPath Feature Set 3 Enabling the FabricPath Feature Set 4 Disabling the FabricPath Feature Set 4 Disallowing the FabricPath Feature Set in a VDC 5 Allowing the FabricPath Feature Set in a VDC 6 Verifying Feature Sets 7 Configuration Example for the FabricPath Feature Set 7 Additional References 7 Related Documents 8 Feature History for FabricPath Feature Set 8 Configuring Feature Set for FabricPath OL-23776-01 iii Configuring Feature Set for FabricPath iv OL-23776-01 Contents Preface This preface describes the audience, organization and conventions of the Cisco Nexus 5000 Series NX-OS Fundamentals Configuration Guide. It also provides information on how to obtain related documentation. Audience, page v Document Organization, page v Document Conventions, page v Related Documentation for Nexus 7000 Series NX-OS Software, page vi Obtaining Documentation and Submitting a Service Request, page vii Audience This publication is for experienced users who configure and maintain Cisco NX-OS devices. Document Organization This document is organized into the following chapters: Description Chapter Describes how to install and enable the FabricPath feature set. Managing the FabricPath Feature Set, page 1 Document Conventions This document uses the following conventions: Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. Note Configuring Feature Set for FabricPath OL-23776-01 v Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Caution Related Documentation for Nexus 7000 Series NX-OS Software Cisco NX-OS documentation is available at the following URL: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html The documentation set for the Cisco NX-OS software includes the following documents: Release Notes Cisco Nexus 7000 Series NX-OS Release Notes, Release 5.x Cisco NX-OS Configuration Guides Cisco Nexus 7000 Series NX-OS Virtual Device Context Quick Start, Release 5.x Cisco Nexus 7000 Series OTV Quick Start Guide Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Security Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS OTV Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS FabricPath Configuration Guide, Release 5.x Configuring Feature Set for FabricPath Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide, Release 5.x Cisco Nexus 7000 Series NX-OS Software Upgrade and Downgrade Guide, Release 5.x Cisco Nexus 7000 Series NX-OS High Availability and Redundancy Guide, Release 5.x Cisco Nexus 7000 Series NX-OS System Management Configuration Guide, Release 5.x Configuring the Cisco Nexus 2000 Series Fabric Extender Cisco Nexus 7000 Series NX-OS Configuration Examples, Release 5.x Cisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference Cisco Nexus 7000 Series NX-OS MIB Quick Reference Cisco NX-OS Licensing Guide Cisco NX-OS XML Management Interface User Guide, Release 5.x Configuring Feature Set for FabricPath vi OL-23776-01 Preface Related Documentation for Nexus 7000 Series NX-OS Software Cisco NX-OS Command References Cisco Nexus 7000 Series NX-OS Command Reference Master Index, Release 5.x Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Interfaces Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Layer 2 Switching Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Security Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS OTV Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS FabricPath Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS Virtual Device Context Command Reference, Release 5.x Cisco Nexus 7000 Series NX-OS System Management Command Reference, Release 5.x Other Software Document Cisco Nexus 7000 Series NX-OS Troubleshooting Guide Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Configuring Feature Set for FabricPath OL-23776-01 vii Preface Obtaining Documentation and Submitting a Service Request Configuring Feature Set for FabricPath viii OL-23776-01 Preface Obtaining Documentation and Submitting a Service Request C HAP T E R 1 Managing the FabricPath Feature Set This chapter describes how to install and configure the FabricPath feature set on Cisco NX-OS devices. Information About the FabricPath Feature Set, page 1 Licensing Requirements for the FabricPath Feature Set, page 1 FabricPath Feature Set Guidelines and Limitations, page 2 Default Settings for the FabricPath Feature Set, page 2 Managing the FabricPath Feature Set, page 2 Verifying Feature Sets, page 7 Configuration Example for the FabricPath Feature Set, page 7 Additional References, page 7 Information About the FabricPath Feature Set The Cisco Nexus 7000 Series device supports a large number of features that can be enabled at run time, often dependent on the licenses available on the device. Certain complex features cannot be dynamically loaded or unloaded. In earlier releases of Cisco NX-OS, these features were loaded at boot-time regardless if the feature was configured or actively being used on the device, which created problems since system resources (specifically, memory and CPU) were being consumed. There were also undesirable traces of the feature such as running services, binaries and libraries on the filesystem, configuration commands, device drivers, messaging opcodes, and other elements. Feature sets were created to address these issues. A feature set is a collection of components that perform a specific set of functions. You must install and enable the FabricPath feature set before you can configure the components that make up the feature set. See Cisco Nexus 7000 Series NX-OS FabricPath Configuration Guide, Release 5.x for configuration instructions. Licensing Requirements for the FabricPath Feature Set The following table shows the licensing requirements for the FabricPath feature set: Configuring Feature Set for FabricPath OL-23776-01 1 License Requirement Product FabricPath requires the Enhanced Layer 2 license. For an explanation of the licensing scheme, see the Cisco NX-OS Licensing Guide. Cisco NX-OS FabricPath Feature Set Guidelines and Limitations The FabricPath feature set has the following guidelines and limitations: You must install the Enhanced Layer 2 license before you can install and configure the FabricPath feature set. You must install the FabricPath feature set in the default VDC before you can enable the feature set in any VDC (including the default VDC). The FabricPath feature set operation may cause the standby supervisor to reload if it is in an unstable state, such as following a service failure or powering up. You can check whether the standby supervisor is stable with the show modules command. When the standby supervisor is stable, it is indicated as "ha-standby". Default Settings for the FabricPath Feature Set This table lists the default settings for the FabricPath feature set parameters. Table 1: Default the FabricPath Feature Set Parameter Settings Default Parameters Disabled feature-set command Managing the FabricPath Feature Set Follow these steps to manage the FabricPath feature set: Procedure Step 1 Installing The FabricPath Feature Set, page 3 Step 2 (Optional) Uninstalling the FabricPath Feature Set, page 3 Step 3 Enabling the FabricPath Feature Set, page 4 Step 4 (Optional) Disallowing the FabricPath Feature Set in a VDC, page 5 Configuring Feature Set for FabricPath 2 OL-23776-01 Managing the FabricPath Feature Set FabricPath Feature Set Guidelines and Limitations Installing The FabricPath Feature Set You must install the FabricPath feature set in the default VDC. Before You Begin Ensure that you are in the default VDC. Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Installs the FabricPath feature set in the default VDC. install feature-set fabricpath Example: switch(config)# install feature-set fabricpath Step 2 Exits configuration mode. exit Example: switch(config)# exit switch# Step 3 Uninstalling the FabricPath Feature Set You can uninstall the FabricPath feature set. Before You Begin The FabricPath feature set must be installed in the default VDC. The FabricPath feature set must not be enabled in any VDC. Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Configuring Feature Set for FabricPath OL-23776-01 3 Installing The FabricPath Feature Set Managing the FabricPath Feature Set Purpose Command or Action Uninstalls the FabricPath feature set. You cannot uninstall the feature set if it is enabled in any VDC. no install feature-set fabricpath Example: switch(config)# no install feature-set fabricpath Step 2 Exits configuration mode. exit Example: switch(config)# exit switch# Step 3 Enabling the FabricPath Feature Set You can enable the installed FabricPath feature set in any VDC on the device. Before You Begin Ensure that you have installed the FabricPath feature set in the default VDC. Ensure that you are in the correct VDC or use the switchto vdc command. Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Enables the FabricPath feature set. The feature set must be installed before it shows as an option to this command. feature-set fabricpath Example: switch(config)# feature-set fabricpath Step 2 Exits configuration mode. exit Example: switch(config)# exit switch# Step 3 Disabling the FabricPath Feature Set You can disable the FabricPath feature set. Before You Begin Ensure that you have installed the FabricPath feature set in the default VDC. Ensure that you are in the correct VDC or use the switchto vdc command. Configuring Feature Set for FabricPath 4 OL-23776-01 Enabling the FabricPath Feature Set Managing the FabricPath Feature Set Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Disables the FabricPath feature set. no feature-set fabricpath Step 2 Example: switch(config)# no feature-set fabricpath The no feature-set fabricpath command may take some time to complete if the size of the configuration is very large. The command must clean up all of the configurations associated with the FabricPath feature set. Note Exits configuration mode. exit Example: switch(config)# exit switch# Step 3 Disallowing the FabricPath Feature Set in a VDC By default, when you install the FabricPath feature set, it is allowed in all VDCs. You can disallowthe installed FabricPath feature set in a VDC on the device. Before You Begin Ensure that you installed the FabricPath feature set in the default VDC. Ensure that you have not enabled the FabricPath feature set in the specified VDC. Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Specifies a VDC and enters VDC configuration mode. vdc vdc_ID Example: switch(config)# vdc 1 Step 2 Configuring Feature Set for FabricPath OL-23776-01 5 Disallowing the FabricPath Feature Set in a VDC Managing the FabricPath Feature Set Purpose Command or Action Disallows the FabricPath feature set in the VDC. You cannot disallow the FabricPath feature set if it is enabled in the specified VDC. no allow feature-set fabricpath Example: switch(config-vdc)# no allow feature-set fabricpath Step 3 Exits VDC configuration mode and returns to EXEC mode. end Example: switch(config-vdc)# end switch# Step 4 Allowing the FabricPath Feature Set in a VDC By default, the installed FabricPath feature set is allowed in all VDCs on the device. You can disallow the installed FabricPath feature set in a specific VDC. Subsequently, you can allow that disallowed FabricPath feature set in the VDC. Before You Begin Ensure that you have installed the FabricPath feature set in the default VDC. Procedure Purpose Command or Action Enters configuration mode. configure terminal Example: switch# configure terminal switch(config)# Step 1 Specifies a VDC and enters VDC configuration mode. vdc vdc_ID Example: switch(config)# vdc 1 Step 2 Allows the FabricPath feature set in the VDC. allow feature-set fabricpath Example: switch(config-vdc)# allow feature-set fabricpath Step 3 Exits VDC configuration mode and returns to EXEC mode. end Example: switch(config-vdc)# end switch# Step 4 Configuring Feature Set for FabricPath 6 OL-23776-01 Allowing the FabricPath Feature Set in a VDC Managing the FabricPath Feature Set Verifying Feature Sets To display information about the configured feature sets including the FabricPath feature set, perform the following task: Description Command Displays the status of the feature sets on the device. show feature-set Configuration Example for the FabricPath Feature Set The following example shows how to install the FabricPath feature set on the device and then switch to a VDC and enable the feature set in that VDC: switch# configure terminal switch(config)# install feature-set fabricpath switch(config)# exit switch# switchto vdc vdc1 switch-vdc1# configure terminal switch-vdc1(config)# feature-set fabricpath switch-vdc1(config)# switchback switch# Instead of the switchto command, you can use the ssh command to connect to the management port of the VDC. Note The following example shows how to install the FabricPath feature set in the default VDC on the device: switch# configure terminal switch(config)# install feature-set fabricpath switch(config)# feature-set fabricpath switch(config)# exit switch# The following example shows how to display the status of the feature sets on the device: switch# show feature-set Feature Set Name ID State -------------------- -------- -------- fabricpath 2 enabled fex 3 disabled switch# The following example shows how to display the services used by the FabricPath feature set: switch# show feature-set services fabricpath u2rib drap isis_l2mp 3 services in feature set fabricpath switch# Additional References This section includes additional information that is related to the FabricPath feature set commands. Configuring Feature Set for FabricPath OL-23776-01 7 Managing the FabricPath Feature Set Verifying Feature Sets Related Documents Document Title Related Topic Cisco NX-OS Licensing Guide Cisco NX-OS Licensing Cisco Nexus 7000 Series NX-OS FabricPath Configuration Guide, Release 5.x FabricPath Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide, Release 5.x Virtual device contexts (VDC) Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference, Release 5.x Command reference Feature History for FabricPath Feature Set This table lists the release history for this feature. Table 2: Feature History for FabricPath Feature Set Feature Information Releases Feature Name Added the install feature-set, allowfeature-set, and feature-set commands. 5.1(1) Feature set commands Configuring Feature Set for FabricPath 8 OL-23776-01 Related Documents Additional References I NDE X F FabricPath feature-set 1 licensing requirements 1 feature-set default VDC 7 enable in a VDC 7 guidelines 2 limitations 2 feature-set (continued) show command 7 features 1 L licensing FabricPath 1 Configuring Feature Set for FabricPath OL-23776-01 IN-1 Configuring Feature Set for FabricPath IN-2 OL-23776-01 Index