. 1000Base-LX/LH SFP Module Features Compliant with SFP MSA standard Compliant with IEEE 802.3z 3.3V DC power supply 1310nm, FP LD, 1.25Gbps, 15km Difference LVPECL inputs and outputs Duplex LC connector Compliant with SFF-8472 Hot Pluggable ROHS compliant Applicati ons Gigabit Ethernet 1000Base-LX Ethernet Data storage networks Description Optcore 1000Base-LX single mode Mini-GBIC Module is a high performance and cost effective transceiver. It is designed to meet Gigabit Ethernet (1000Base) application. The transceiver consists two sections: the transmitter section consists of a high reliability 1310nm FP LD with monitor photo detector (MPD) in eye safety; the receiver section consists of a high-speed InGaAs PIN photodiode (PD) and trans-impedance preamplifier. The output of the PD drives the post-amplification, quantizing, and optical signal detection circuits. The receiver is built in the LOS monitoring function. For further information, please see SFP MSA and SFF-8472 standard. With plenty experience in interoperability with 3rd party standard based network equipment such as Cisco, Huawei, 3com, HP, Alcatel-Lucent, D-LINK, Extreme, Finisar, Juniper, Netgear, Planet and ZyXEL, Optcores fiber optic transceiver are able to fulfill enterprises, service providers, telecom operators and SAN providers to build and fulfill their existing and future network expansions. Block Diagram
1000Base-LX/LH SFP Module Fiber Optic Tansceiver
Version 1.0 - 2 - www.cnoptcore.com . PECL Logic Level Logic State Unit Min Typ Max Low V VCC-1.84 - VCC-1.60 High V VCC-1.10 - VCC-0.90 Transceiver Pin Locations
Absolute Maximum Ratings Parameter Symbol Min Max Unit Storage Temperature TS -40 85 C Operating Temperature To 0 70 C Storage Relative Humidity RHS - 95 % Power Supply VCC - 3.3 V Lead Solder Temperature TSLD - 260 C Lead Solder Duration tSLD - 10 s Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes Transmitter Centre Wavelength C 1261 1310 1360 nm Average Output Power P0ut -9 -3 dBm Spectral Width (RMS) 4 nm Extinction Ratio ER 8.2 dB Output Optical Eye Compatible with Telcordia GR-253-CORE and ITU-T G.957 Data Input Swing Differential VIN 400 1600 mV Input Differential Impedance ZIN 90 100 110 TX Disable Disable 2.0 Vcc V Enable 0 0.8 V TX Fault Fault 2.0 Vcc+0.3 V Normal 0 0.8 V
1000Base-LX/LH SFP Module Fiber Optic Tansceiver
Version 1.0 - 3 - www.cnoptcore.com . Receiver Centre Wavelength C 1260 1580 nm Receiver Sensitivity -21 dBm Receiver Overload -3 dBm Optical Path Penalty 1 dB LOS De-Assert LOSD -24 dBm LOS Assert LOSA -30 dBm LOS Hysteresis 0.5 5 dB Data Output Swing Differential VOUT 400 2000 mV Note: Average received power where the BER = 10 -12, measured with a 27-1 NRZ test pattern. Power Supply The Transceiver includes internal circuit components to filter power supply noise.Under some conditions of EMI and power supply noise, external power supply filtering may be necessary. If receiver sensitivity is found to be degraded by power supply noise, the filter network illustrated in the following figure may be used to improve performance. The values of the filter components are general recommendations and may be changed to suit a particular system environment. Shielded inductors are recommended.
Recommended Application Circuits
Recommended Front Panel Layout Opening for LC
1000Base-LX/LH SFP Module Fiber Optic Tansceiver
Version 1.0 - 4 - www.cnoptcore.com . Outline Specification
Version 1.0 - 5 - www.cnoptcore.com . Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Optcore Technology Co., Ltd. No.126 Wenhua Road, Jinshui District, Zhengzhou, P.R China Tel: +86-371-63562012 Fax: +86-371-63562012 Email:sales@cnoptcore.com http://www.cnoptcore.com
2010 Optcore Technology. All rights reserved. The information presented is subject to change without notice. Optcore assumes no responsibility for inaccuracies contained herein. Trademark notice All trademarks, product and company names mentioned are the property of their respective owners.