Você está na página 1de 23

UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002

Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
LOT 1
Comply with UNOPS specs Yes/ No If no, specify technical
differences
1 Fine Scissors Fine Scissors: straight 4-1/2 stainless steel
2 Surgical Scissors Surgical Scissors: straight , sharp/ blunt point 4-1/2 stainless steel
3 Thumb forceps
Thumb forceps, 137mm/5.5" Blunt-nosed thumb forceps with serrated tips. Stainless
steel.
4
Fine forceps
Fine forceps: curved , and straight 4-1/2; stainless steel; artery, kelly, 140 mm, stainless
steel
5 Dissecting forceps Forceps, toothed tips, treve's, stainless steel, 125mm
6
Needle holder
Needle holder, straight, Mayo-Hegar, 160mm (7") and 180mm (71/4") long, central
grove,box lock, multiple ratchet, stainless steel. 65 from each 160mm (7") and 180mm
(71/4") long. Total 130
7
Scalpel handle No 4
No. 4 Scalpel Handle.13cm long and designed to hold blades # 20,21,22,and 25 stainless
steel
8 Surgical Blades #20,21,22,and 25 (1 Pack of each size holds 100 blades)
9
Scalpel handle No 3
No 3 Scalpel Handle. 12cm long and designed to hold blades # 10,11,12 and 15 stainless
steel
10 Model Dental
Classic tooth series shows five representative types of adult dentition individually
mounted on removable stands: 2 part lower incisor with longitudinal section; 2-part lower
canine with longitudinal section; lower single-root.
11 Surgical blades #10, #11, #12, and #15 (1 pack of 100 blades for each size)
12 MOSQUITO FORCEPS straight Halsted MOSQUITO FORCEPS :5" straight halsted stainless steel
13 MOSQUITO FORCEPS curved Halsted MOSQUITO FORCEPS :5"curved halsted stainless steel
14 Artery forceps Artery forceps, Curved Forceps 5.5"
15 Hemostats, Curved Forceps Kocher Hemostats or equivalent, Curved 5.5"
16 Hemostat Straight Forceps Straight crile forceps 5.5"
17 Kidney dishes Basin, kidney, large, 825ml, 250 x135 x 35mm. stainless steel
18 Kidney dishes Basin, kidney, small, 475ml, 205x108 x 40mm stainless steel
19 Kideny dish Plastice Basin, kidney, small, 475ml,205x108 x 40mm Plastic
20 Basin round , small Basin, round, small, 4 litres, 315x90mm, stainless steeel
21 Basin round , large Basin,round, large,6 litres,315x 127 mm, stainless steeel
22 Suturing needle(Box of 20) Suturing needle rounded and cutting sizes (Box of 20)
23 Cut gut (Box of 10) Cut gut (Box of 10)
24 Pick up forceps Pick-Up Forceps 8" stainless steel
25 Jar of pickup forceps Jar of pickup forceps stainless steel
26 Nail brush Nail brush for (scrubbing lessons)
27
IV stand IV stand, variable height,approx. 1330 to 2330mm. Double hook welded to the upper
pole, telescoping.heavy 4 legged base on castors, furnished with anti-static rubber wheels.
Metalic
28
Dressing trolley.(Local) CASTORS FINISH: 75mm Twin wheel, stainless steel shelves, epoxy powder coated side
frames; FEATURES: Push handle both sides, guard rail on three sides, stainless steel
shelves. Dimensions 1060L x 500W x 950H
29
CYLINDERICAL STERLIZER DRUM, CYLINDERICAL STERLIZER DRUM, With stainless steel,perforated sides with air
tight sliding band to cover perforations, hinged lid with lifting handle
o size diameter 240mmx height 160mm
o size diameter 290 mmx height 160mm,
o size diameter 340mmx height 160mm stainless steel,
13 Each
30
Trays for Instrument different size Tray, instrument and catheter, stainless steel, with crown, cover and strap
handle,215x75x38mm. (3x13= 39)
Tray, instrument, shallow, 480x330x19mm, stainless steel>(3x13=39)
Tray, instrument, with cover,stainless steel 225x125x50mm-->(2x13=26)
Tray,instrument, with cover, stainless steel 310x195x63mm--> (2x 13=26)
TOTAL = 130
31
Trolley for Instrument Carriage, dressing with 2 shelves guard rail around top and lower shelf at proximity of
lower shelf, L900xW550xH1000, mounted on four wheel discs with rubber tiers, stainless
steel
Cart, dressing/dispensing, for ward use
Knock-down construction, approx:L950xW550xH1000
two shelves, edges turned high doubled over
mounted on ball-bearing, rubber tired swivel castors
115 kg maximum capacity, stainless steel
Technical Specifications - Comparative data form
Integrated Biomedical Laboratory Equipments for Medical Schools
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
1 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
32
AUTOCLAVE: FRONT LOADING COMPACT ELECTRICAL
AUTOCLAVE: FRONT LOADING COMPACT ELECTRICAL AUTOCLAVE:
40- 50 litter
A fully programmable Touch Screen Controller
Stainless steel chamber
Base shelf within the chamber
ultra quick Swift lock door mechanism
Self contained design with no installation required - just fill it with water and plug it in
and the machine should be ready to for use
A full Range of Accessories
Program and customize cycle parameters;
o High precision control system for accurate sterilization results;
o PC Communication port enables storage of sterilization results;
o Temperature and pressure monitoring ;intuitive display
o Cycle information recovery in the case of power failure or cycle interruption ;
o Insufficient water detector with automatic shutoff ;
o Consistent monitoring of temperature and pressure for real- time
accurate results ;
o Water-level sensors prevent cycle activation when insufficient water is detected in
the chamber or reservoir Capacity:
Double locking safety device prevents door from opening while chamber is pressurized
Control lock-out switch prevents starting a cycle if door is not properly locked
Door failure protection prevents door from opening at high pressure16L
33 Huber mall probe Mall probe, 150mm (6"), stainless
34
Electric Autopsy Bone Saw, Oscillating Saw Electric Autopsy Saw oscillating saw: Swing the highest number: More than 12, 000
times per min. Maximum swing range: More than 5 degree. Power supply: 220V/50Hz.
Machinable plaster and polymer materials. Hex drive provides 6 blade rotations extending
blade life by 50% . G. Weight: ~2.9KGS.Dimension: 260*60*50mm.Descriptions should
be in English
35
Model: Articulated standard Human Skeleton Standard articulated full Human Skeleton life size with a stand . Scientific
Human Skeleton Model
Standard anatomical skeleton model of quality for Anatomy laboratory.
Made of durable, washable, unbreakable plastic Flexible joint
ligaments
Flexible vertebral column
Human skeleton weight of the approx. 200 bones, scientific quality and highly detailed
Life-size skeleton model
Skeleton Model Measurements: 170 cm
Skeleton Model Weight: 8 kg
Hanging skeleton model stand with dust cover .
36
Model:Disarticulated standard Human Skeleton Standard life-size, disarticulated adult skeleton including all parts of the human skeleton.
37
Model: Human skull male Sets Male human Skull Model, 3 part Features: Highly accurate representation of the fissures,
foramina, processes, sutures etc. medical quality human skull replica that can be
disassembled into skull cap, base of skull and mandible . Mandible should be mounted on
a spring to easily demonstrate natural movement and the tooth individually cast for
realistic dentition .
38
Model: Human skull female Sets Female human Skull Model, 3 part Features: Highly accurate representation of the
fissures, foramina, processes, sutures etc. medical quality human skull replica that can be
disassembled into skull cap, base of skull and mandible . Mandible should be mounted on
a spring to easily demonstrate natural movement and the tooth individually cast for
realistic dentition .
39
Foetal skull model Fetal skull, natural cast of a fetal head in the 30th week of pregnancy
18.5x14.5x14cm;0.4kg ,with and without stand with stand
40
Foetal skull model Fetal skull,natural cast of a fetal head in the 30th week of pregnancy
18.5x14.5x14cm;0.4kg ,with and without stand with out stand
41
Model :Brain A life size human brain model divided medially in 2 parts along the sagittal plane, which
shows the left and right cerebrum, cerebellum and brain stem, and blood vessels. Should
include cradle base.Size: 16 x 20 x 14 cm, weight: approx. 1.4 kg
42
Model: Brain Half Model of the right brain half in life size. Represented are also Cerebellum and brain stem.
On Stand, removable. Size: 16 x 13 x 18 cm, weight: 0.3 kg.
43
Model: Nervious system A real life model showing a schematic representation of the central and peripheral nervous
system. It is 1/2 life size and is delivered on baseboard.
44
Model :Head and Neck Head model : life-size 6-part head is mounted on a base and features a removable 4-part
brain half with arteries. Eyeball with optic nerve removable and one side of the high
quality model exposes the nose, mouth cavity, pharynx, occiput and skull base. Head
model to be delivered on a removable base for easy display in a classroom
Measurements & Weights ~ 19 x 23 x 22 cm .
45
Model: Head and neck musculature Half head and neck musculature: with superficial and the internal (median section)
structures of head and neck. Half head with musculature is delivered on removable stand
for easy display in a classroom Size ~22 x 18 x 46 cm and Wigth~ 1.1 kg.
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
2 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
46
Model 1 :Eye Human Eye Anatomy Model on base: 5 times thelivesize .
Removable parts of this anatomical human eye model include:
* Upper half of the sclera with cornea and eye muscle attachments
* Both halves of choroid with iris and retina
* Lens
* Vitreous humour Weights & Measurements
size ~ 18 x 18 x 20 cm
Weight~1 kg.
47
Model 2 :Eye Human Eye Anatomy Model on base: 3 times life size,large anatomical human eye model
shows the optic nerve in its natural position in the bony orbit of the eye (floor and medial
wall). The human eyeball modle that can be dissected into:
Both halves of sclera with cornea and eye muscle attachments
Both halves of the choroid with iris and retina
Eye lens
Vitreous humour
Size ~18 x 26 x 19 cm and Weight~1.1 kg
48
Model :Ear Human Ear Model 4-5 times life-size viewing from anywhere in the classroom! The
Giant ear model should represents the outer, middle and inner ear. Auditory ossicles and
labyrinth with cochlea and vestibulocochlear nerve are removable from ear for more
detailed anatomy study. Ear model to be delivered on base for easy display. Size ~25 x 41
x 25 cm.
49
Model: Phantom Head (Dentistry)
Human Dental Model : classic tooth series shows 5 representative types of adult dentition
individually mounted on removable stands:
2-part lower incisor with longitudinal section
2-part lower canine with longitudinal section
Lower single-root pre-molar
2-part lower twin-root molar with longitudinal section showing caries attack
3-part upper triple-root molar with longitudinal section and caries insert Each tooth is
also available singly.
50
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
51
Catalogues Attach picture/catalogue of item offered
52
Packing Packing to be done according to UNOPS packing and Shipping Instructions
53
Brand Brand name / model number for all items
54
Origin Country of origin of all items
55
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT2
1
Model :Upper and lower respiratory tract Scientific Lung Model with larynx, 7 part :The lung model with larynx is first class. Lung
model containing the following removable parts for added anatomical detail:
* 2-part larynx
* Trachea with bronchial tree
* 2-part heart
* Subclavian artery and vein
* Vena cava
* Aorta
* Pulmonary artery
* Esophagus
* 2-part lung (front halves removable)
* Diaphragm
Descriptions should be in English
2
Model:The Heart
Seintifiec Heart Model : size: 2-times life-size heart model with all structures of the
human heart identified . The atriumwalls and thefront heart wall should be
removableto reveal detailes of theheart structure. Colored to depict the anatomical
structuer of the human heart. Additionally the heart model should depict the upper
section of theesophagus, theupper bronchi and theascending aorta and thefront
heart wall and theatrium walls can be removed. Heart delivered on removable stand.
Weights & Measurementssize ~32 x 18 x 18 cm and wt ~1.3 kg.

3
Model :The Liver and Biliary system
Sientific Model of the Human Liver and Biliary system: model shows the liver with:
Ducts
Gall bladder
Pancreas
Duodenum
Vessels
Extra-hepatic ducts with gall bladder
Main pancreatic duct and their orifices
The anatomy of the liver with Gall Bladder, Pancreas and Duodenum is graphically
illustrated. The liver with gall bladder, pancreas and duodenum is delivered on baseboard.
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
3 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
4
Model : Gastrointestinal System Sientifice Digestive system Model : Life-size digestive system model that demonstrates
the entire digestive system in graphic relief. The digestive system mounted on baseboard.
Digestive System features:
Nose
Mouth cavity and Pharynx
Esophagus
GI tract
Liver with gall bladder
Pancreas
Spleen
The duodenum, caecum and rectum of the digestive system should be opened . The
transverse colon removable. Size~81 x 33 x 10 cm weight 4.4 kg.
5
Model :Kidney and Urinary system
Dual Sex Urinary System model: showing:
Structures of retroperitoneal cavity
Large and small pelvis with bones and muscles
Inferior vena cava
Aorta with its branches including iliacal vessels
Upper urinary tract
Rectum
Kidney with adrenal gland.
One front half of a kidney is removable from the anatomical model of the urinary system.
With easy to change male insert (bladder and prostate, front and rear half) and female
insert (bladder, womb and ovaries, 2 lateral halves) . Parts are numbered on the Dual Sex
Urinary System.
6
Model: Male reproductive system Male Reproductive System Model Activity Set: Useful for topics such as prostate
cancer, vasectomies and sterility. Model depicting all male reproductive organs in
relationship to one another, as well as a greatly magnified section of the sperm;
Measurements: 61 x 45 cm; 1 kg
7
Model: prostate Prostate Model (schematic):
A prostate model providing a cross section of the male genital organs and showing a
healthy prostate with bladder, urethra, testicle, symphysis and rectum. The narrowing of
the urethra due to the change of the prostate is made clear via the four cross sectional
views on the base of the prostate model. The anatomical structures of the prostate model
shown with simple schematic coloring.
8
Model: Penis anatomic model Penis Model : Model of cross section of male genital organs showing all structures in
detail, mounted on a base.
9
Model :Female reproductive system Female Reproductive System Model Activity Set: Showing womens health issues and
pregnancy. Detailed lateral section of the lower female torso showing partially sectioned
organs and a magnified, cross-section of the ovum. The model illustrates the internal body
structure. Weights & Measurements: ~61 x 45 cm; 1 kg
10
Model :Pelvic model female Female Pelvis, 2 parts:
A median section female pelvis model with a removable half of genital organs including
bladder and rectum. The abdominal and pelvic muscles should be shown in anatomical
detail. The pelvic model is delivered on baseboard.Weights & Measurements: ~26 x 22 x
17 cm, 1.65 kg
11
Model- Pregnancy series Pregnancy Series - 9 Models;
Containing:
Embryo approx. 4 weeks old, 25 times life-size
1st Month Embryo,
2nd Month Embryo,
3rd Month Embryo,
4th Month Foetus (Transverse Lie)
5th Month Foetus (Breech Position)
5th Month Foetus (Transverse Lie)
5th Month twin foetus (Normal Position)
7th Month Foetus. Descriptions should be in English
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
4 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
12
Model: 3/4 life-size dual sex - muscle, 45 parts
Dual Sex Muscle Torso, 31-part
A torso depicting both the superficial and deep muscles, and the two main muscles, the
deltoid and gluteus maximus can be removed for closer studies. Allowing the study of the
vertebrae, the spinal cord, spinal nerves and vertebral arteries, exchange the male and
female genital inserts, discover the internal structures of the brain, etc. All the organs in it
are hand painted;
The following parts are removable from the torso:
6-part head
Chest and abdominal wall with muscles
7th thoracic vertebra
Female mammary gland
Gluteus maximus and deltoid muscle
2 lungs
2-part heart
2-part stomach
Liver with gall bladder
4-part intestinal tract
Front half of kidney
3-part female genital insert with fetus
4-part male genital insert .
13
Model: Functional larnyx Functional Larynx Model, 2.5 times full-size
The epiglottis, vocal cords and arytenoid cartilage should be movable in the functional
larynx. Additionally the following structures of the human larynx are represented:
Hyoid bone
Cricoid cartilage
Thyroid cartilage
Thyroid
Parathyroid glands
The Functional Larynx should have a stand.
Weights & Measurements:~ 14 x 14 x 28 cm; 0.8 kg.
14
Model: functional shoulder joint Functional Shoulder Joint Model
A functional shoulder joint model of a naturally-sized right joint with ligaments showing
the anatomy and possible physiological movements (e.g. abductions, anteversion,
retroversion, internal and external rotation) in exceptional detail. Realistic color of the
natural-cast bones; The cartilage on the joint surfaces should be marked in a separate
color; The joint model consisting of shoulder blade, collarbone and upper arm stump; the
functional shoulder joint model should be mounted on a base. Weights & Measurements:
~22 cm, 0.41 kg.
15
Model: functional hip joint Functional Hip Joint Model
A functional hip joint model of a natural-sized right joint with ligaments showing the
anatomy and possible physiological movements of the human hip joint (e.g. abductions,
anteversion, retroversion, internal and external rotation) in detail. The color of the natural-
cast bones should be realistic and the cartilage on the hip joint surfaces marked with a
separate color. It should consist of thigh stump and hipbone and should be mounted on a
base. Weights & Measurements: ~32 cm, 0.56 kg.
16
Model: functional knee joint
Functional Knee Joint Model
A functional knee joint model of a naturally-sized right knee joint with ligaments showing
the anatomy and possible physiological movements (e.g. abductions, anteversion,
retroversion, internal and external rotation) in detail. It should clearly define the ACL and
PCL. The color of the natural-cast bones of the knee joint should be realistic. The
cartilage on the knee joint surfaces is marked with a separate color. It should consist of
thigh stump, shinbone stump and calf bone stump, menisci and patella and should be
mounted on a base. Weights & Measurements: ~32 cm, 0.55 kg.
17
Model: functional elbow joint Functional Elbow Joint Model
A functional elbow joint model of a naturally-sized right elbow joint with ligaments
showing the anatomy and possible physiological movements (e.g. abductions, anteversion,
retroversion, internal and external rotation) in detail. The color of the natural-cast bones
of the joint should be realistic. The cartilage on the elbow joint surfaces is marked with a
separate color and should consist of a stump of the upper arm, ulna and radius. It should
be mounted on a base. Weights & Measurements:~33 cm,0.285 kg.
18
Model: skin Skin, Block Model, 70 times full-size
A skin model showing a section of human skin in three dimensional form. Individual skin
layers are differentiated, and important structures of the skin such as hair, sebaceous and
sweat glands, receptors, nerves and vessels are shown in detail. The skin block model
should be mounted on baseboard.
19 Model : Human Muscular system complete dual sex muscular figure, 45 parts,on stand
20
Mankins Patient care dolls-adult Basic patient care Manikin,female/male features, full size adult with movable joints, as
well as soft fingers and toes,include IM, IV, Subcutaneous injections,soft hand for finger
prick,and stomies,allows basic&advanced patient care.
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
5 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
21
Manikin child patient care doll Child patient care mankin with rotatable arms and legs and articulating hand,allows
training of basic and advanced patient care
22
Manikin Male: Human models with all internal
organs
Male deluxe torso with head,20 parts,parts are easily removable to facilitate teaching
23
Manikin: Female :Human models with all internal
organs
Female deluxe torso with head, 20parts,parts are easily removable to facilitate teaching
24 Strechers wheeled
Strecher,wheel and carrying combination. Equipped with litter,partial utility shelf,
(blanket), Dimensions L1830XW686XH864MM made from steinless steel
25 Automatic embalming Set
To be supplied with complete electric cord, plug and suitable to work on 220 volts, 1ph
50 hz, ac supply.
26
Anatomical Charts of all systems (set) (Size: 42" W x 62" H. ) separet charts for each system should be included in each set .
Head and Neck, Eye, Ear, Cardiovascular system, Respiratory system, Gastro intestinal
,Genitourinary, Reproductive (Male ,Female) Skeleton(ostiology),Body Muscules,,
Nervus system .
27
Interactive Full Human anatomy 3D DVD/CD
of the different systems
Interactive human anatomy and physiology DVDs of all systems of the body (Set of
different systems ).
28
Lab cupboard anti-corrosion, ventilate fume freely, meets the national standard, Material: FRP
29
Model : Embryo model Pregnancy series embryo model from 1st month to 7th month embryo or fetus, all models
mounted together on a base
30
Prepared Slides :Histology prepared slides of the
all systems
Set of prepared Histology slides(100 slides in each set) of all organs
31
Prepared Slides :Embryology prepared slides Set of prepared Embriollogy slides (50 Slides in each set) of the embryo at different
stages
32
Prepared Slides :Pathology prepared slides of the
all systems
Set of prepared Pathology slides (100 slides in each set) of all organs
33
Slide try cabinet Store up to 240 1 x 3 microscope slides in this polypropylene cabinet; it holds 12
horizontal slide trays. The clear acrylic door slides vertically. Slide trays are available
separately. Size: 7 3/4L x 14W x 7 1/2H.
34
3D DVD/CD Histology A full set 3D DVD/CD of the histology of the different normal tissues of the body in
full
35 3D DVD/CD Embryonic Development Afull set 3D DVD/CD of the embryonic development full set
36
3D DVD/CD Phatology of all systems A full set 3D DVD/CD of the pathology of the different normal tissues of the body full
Binocular tube, 45 degree inclination, 360 degree rotatable
Rectangular mechanical stage with coarse and fine adjustments
Condenser with iris diaphragm and filter
10xWF Eye piece, With low voltage illuminator,Objectives 4x,10x,40x,100x & oil
immersion,Dust cover and hard wooden cabinet
Main supply voltage 220V, 50Hz
40
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
41 Catalogues Attach picture/catalogue of item offered
42 Packing Packing to be done according to UNOPS packing and Shipping Instructions
43 Brand Brand name / model number for all items
44 Origin Country of origin of all items
45
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT3
Measuring lab pipette, different sizes marked in micro liter of 10ml, 15ml, 25ml, and
50ml, glass, volumetric, 3 of each sizes: [(10 ml x3x13) + (15mlx3x13) + (25mlx3x13) +
(50ml x3x13) = 3900
1
Pipette different sizes 5mL Transfer Pipet, Graduated, 500/dispenser box, 10 boxes/case (5000 each). Transfer
pipets, non-sterile. 5mL capacity. Graduated to 1mL. 150mm long. 22 drops/mL.
Packaging: Box: 500 each
2 Transfer Pipette different size
Test tubes, pyrex of different sizes with stopper (Glass). Each size shall be with rim and
rimless (culture tube). Sizes: 10mm x 75mm , 12mm x 75mm, 16mm x 100mm, 18mm x
150mm, 24mm x 150mm. 1 box of each size. 1 Box with a minimum of 72 tubes. 1 box is
with rim and the other box is rimless. 5 boxes x2= 10 boxes (rim and rimless), for 13
schools multiply by 10 = 130 boxes
3
Test tubes of different sizes with stopper Stoddard type with finger grip; brass or nickel steeel, works with maximum diameter x
overall length (mm) of 25 mm x 127mm. A pack of 10 for each school. 1 pack has 10
clamps. 13 packs x 10 clamps/pack= 130 clamps
4 Test tube clamp Funnel Separatory Glass 500ml and 1000ml 2 of each size. (2x2x13=52)
5
Funnel Test tube rack 2 of each size tube, polypropylene for 10mm x 75mm , 12mm x 75mm,
16mm x 100mm, 18mm x 150mm, 24mm x 150mm. 10 racks. For 13 medical schools:
13x10=130 racks.
6
Test tube rack Table top Centrifuge, adjustable speeds to 5,500 rpm, capacity of 15mlx8
With full accessories : Micro centrifuge tube with cap blue screw, printed graduated
cones, 50/rack tube, urine centrifuge with sediment bulb and flare.
Power supply: 220V, 50Hz
7
All purpose centrifuges Centrifuge, Micro-Heamatocrit, direct reading,24 tube capacity: accommodates twenty
four 75mm specially calibrated color coded , plastic heparinised capillary tubes, five
minute centrifugation cycle, complete with adjustable 1 to 5 minute automatic timer and
swivel magnifier.
Power supply 220V/50Hz
Microscope (scientific ) Equivalent to Olompus)
37
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
6 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
8
Micro hematocrit centrifuges Advanced microprocessor for accurate weighing results and fast stabilization
Lock-down capable
Weighting capacity: 0.001gm- 320gm
Accuracy : 0.001-0.0001gm /1-10mg/
Stainless steel weight platform
RS 232 bi-directional interface for printer or PC connections
Durable ABS housing
Built-in application programs for mass unit conversion, net total formulation, % weighing
and part counting
Simple one-button external calibration
Power supply: 220V/50Hz
9
Analytical Chemical Balance Projection Microscope
* Easy Viewing on Extra Large Size Projection Screen, 200mm Diameter.
Eyepieces and Magnification
* Four Magnifications: 75x, 150x, 300x, and 600x.
* Projection Eyepiece Included: 15x.
* Four Objectives: 5x, 10x, 20x, 40x.
* Spring Loaded 20x and 40x Objectives to Protect Slides.
Condenser - Iris - Filters
* 1.25 N.A. Abbe Substage Condenser, Condenser Movement Knob, Iris Diaphragm
and Swing-Out Filter Holder.
* Rack and Pinion Steel Gears for Easy and Better Condenser Movement.
* Condenser Alignment Screws.
Illumination
* 12V/100W Halogen Transmitted Base Illumination.
Stage Specifications
* Graduated Mechanical Stage Size 130mm x 120mm with X-Y Slide Movement
Knobs.
Focusing : Fine and Coarse Focusing Knobs.
Frame - Base - Size - Weight : Total Overall Height of Microscope: 580mm.
* Instrument Weight: 44.5 lbs.
Included Items : Stage Micrometer with 0.01mm Resolution for Precise Calibration of
On-Screen Reticle.
* Measuring Reticle Built into Viewing Screen.
* Two Movable Mechanical Pointers on Screen.
* Built-In Side Drawer with Lock and Key.
* should comes with Instruction Manual, Dust Cover, Extra Bulb, and Fuse.
10
Projection Microscope Screen, projection, portable, size ~1.27x1.27M(50"x50"), collapsible tripoid mounting,
matt white fabric,vinyl based, fungus and flame resistant, adjustable screen height, with
tension bars and metal case.
11
White Screen Metalic frame (aluminum) white board; frame: pine wood; board: MDF; Non-magnetic
white surface; size: ~250cm*120cm
12
White board
Laboratory furniture; size:3200L*1200W*750Hmm; material:MDF with fireproof board
13
Laboratory table with shelf Microscope (scientific ) Equivalent to Olompus): Binocular tube, 45 degree inclination,
360 degree rotatable. Rectangular mechanical stage with coarse and fine adjustments.
Condenser with iris diaphragm and filter. 10xWF Eye piece, with low voltage illuminator;
Objectives 4x, 10x, 40x, 100x and oil immesion; dust cover. Power: 220V, 50Hz.
With additional 5 Spare halogen bulbs and Fuses
14
Microscope (scientific ) Equivalent to Olompus) BINOCULAR STUDENT MICROSCOPES
1) Style: Binocular tube, 45 degree inclination, 360 degree rotatable..Built in mechanical
stage of this microscope allow smooth X-Y travel in 0.1 mm graduation.
2) Rack and pinion removable
3) 1.25 Abbe condencer & diaphragm for resolution and contrast control
4) Eye Pieces
High quality two eye pieces
10 x with built pointer
Achromatic wide field
5) Objectives
Objectives should be wide field
S flat achromatic, or Phase Achromatic and parafacul, give clear
sharp images
Four objectives as 4 x, 10 x, 40 x 100 x (oil immersion)
6) Stage
Horizontal
Square stage dimensions not less than 120 mm x 120 mm
Spring-loaded paired stage clamps for exact positioning of the
specimen
7) Nose Pieces : Quadruple revolving nose pieces
8) Condenser : NA 0.65 with disc diaphragm
NA 1.25 Abbe Condenser in rack and pinion focusing mount
9) Dust cover
10) Bulb Tungsten Halogen 1500 220-240 V AC
With additional 5 spare halogen bulbs and Fuses
15
BINOCULAR STUDENT MICROSCOPES Timer,stop-clock,spring wound,with second hand:100mm dial,divided 0-60x1:two large
large sweep hands,one indicating seconds the other recording minutes, start/stop
lever;zero reset lever.Housed in metal case.Runs for 30 hours on one winding.
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
7 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
16
Laboratory timer Beaker different sizes in ml (50, 100, 250, 500, and 1000) with spout and rolled rim,
borosilicate HRG glass. Of the different size the following amounts are needed 50 ml in
in Quantity of 10; 100ml in quantiry of 15; 250ml in Quantity of 20; 500ml in Quantity
of 10; and 1000ml in in Quantity of 5 .
17
Beaker, different size Burette, Teflon stopcock with stand different sizes: ml(25,50,100) two of each size.
Thus, 3x2x13=78 burettes
18
Burette, teflon stopcock Stand, Single Burette Clamp. 2 of each size. 5x8 Support stand has a sturdy cast iron
with 20" steel rod. The base shall be sturdy and chemical resistant. Stand shall come with
a burette clamp with plastic coated jaw. Stand shall come with 2 aluminum clamp holders.
2x13=26 iron stands are needed.
19
Burette stand and clamp set, different sizes Flasks of 250 ml, 500 ml and 100 ml (5 each), Erlenmeyer, narrow mouth,vial neck,
borosilicate glass HRG. (Pyrex). 5 flask from each of of the 3 sizes is needed; hence,
5x3x13=195 of Erlenmeyer flasks are requested.
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
8 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
20
Flasks Graduated cylinder different size ml(25,50,100ml). 4 from each size. 3x4x13 medical
schools = 156 graduated cylinders needed.
21 Graduated cylinder Iodine flask Glass sizes 100ml ,250ml ,500ml, 3 from each size
22
Iodine flask Automatic Electrical Autoclave: with a capacity of 40-60 Liter chamber sizes.
Table top model ; Front Loading Compact Autoclave;An ultra quick Swift lock door
mechanism
pre-set sterilization programs;
Program and customize cycle parameters;
High precision control system for accurate sterilization results;
PC Communication port enables storage of sterilization results;
Temperature and pressure monitoring ;intuitive display
Cycle information recovery in the case of power failure or cycle interruption ;
Insufficient water detector with automatic shutoff ;
Consistent monitoring of temperature and pressure for real- time accurate results ; Water-
level sensors prevent cycle activation when insufficient water is detected in the chamber or
reservoir Capacity:
Durable stainless steel chamber and door with electro-polish finish Double locking
safety device prevents door from opening while chamber is pressurized Control lock-out
switch prevents starting a cycle if door is not properly locked Door failure protection
prevents door from opening at high pressure. Power supply: 220V/50Hz
23 Automatic Electrical Autoclave
Digital Precision Balance
Weighting capacity: 0.0001gm- 320gm
Accuracy:0.001-0.0001gm /1-10mg/
Power supply: 220V/50Hz
24 Single pan micro balance
silica gel glass plate;1.20*20cm, 10*20cm, 5*20cm; analysis and preparative plate;
coating:0.2-0.25cm, 0.4-0.5cm and 1cm
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
9 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
25
Chromatography Polyscience microprocessor Water Bath 10L Capacity, 18.84 lb. WD10L11B; Control
bath fluids at temperatures as high as 100C 60C without cover with 0.1C precision and
0.2C uniformity."
26
Water bath Technical Specification
PH Range: 0-14 pH,
Resolution: 0.01 pH
Temperature Range: 0.0 to 100C (Manual Compensation)
Display: 31/2 Digit LED Display
Power Supply: 230VAC 10%, 50 Hz
With Calibration check facility & Calibration Error indication for 7.00 & 4.00 pH
Supplied with Combination Glass pH Electrode (0-70C), Standard Buffer Tablets,
Electrode Stand with Clamp, Dust Cover, Power Cord, Operational & Instruction
Manual, Manufacturer Test Certificate & Warranty Card
27
Digital pH meter Wavelength range: UV and Visible ranges 200 to 1000 nm
Wavelength accuracy (+/-) 2 nm
Spectral bandwidth 5 nm
Light source Xenon flash lamp
Detector Photodiode array
Number of cuvettes one
Size of cuvettes 100 l, 700 l, 1.5 ml, 3.5 ml
Pathlength 1 mm, 2 mm, 5 mm and 10 mm
Display 2 x 24 alphanumeric built-in backlit LCD display
Printer Built-in alphanumeric/graphic
Interface RS-232 serial port
Operating temperature 540 C
Photometric range 02 AU
Scan speed 200800 nm in 20 seconds max
Photometric repeatability 0.02 AU in a 0.12.0 AU range (9 readings) and over a
200800 nm range.
Power requirement 220 V/50Hz
28
Spectrophotometer Compact requiring very little room; Glass-free, chemical resistant housing resists damage
by accidental falls or scratches.
29
Magnetic Stirrer Heat resistant, energy efficient and low maintenace laboratory table lamp. Power
supply : 220V/50Hz
30
Table lamp Heat resistant, energy efficient and low maintenace laboratory table lamp. Power
supply : 220V/50Hz
31
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
32 Catalogues Attach picture/catalogue of item offered
33 Packing Packing to be done according to UNOPS packing and Shipping Instructions
34 Brand Brand name / model number for all items
35 Origin Country of origin of all items
36
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT4
1
Differential cell Counter, manual (Manual Cell
Counter)
Manual Blood cell (Differential) counter. Counter specificaly for every blood cell type. it
is manual counting for demonstrating how the student counts manually
2 Hemoglobinometer Automated Battery operated hemoglobin meter with full accessories
3 E.S.R. tubes ESR West green Glass Tube
4 E.S.R. tubes (Wintrobe)
Capacity:0-105mm; Graduation:1.0mm; Length:120mm; Qty(pcs)/Ctn: 1000(50pcs*20)
5 E.S.R Stands With stainless steel screw or plast screw
6 Blood Grouping sets with antisera ABO-Rh Typing with Synthetic Blood KiPart #7001001 Pkg Qty 1
7 WBC counting chamber (Haemo - cytometer)
Counter,blood cells,differential,9 units,eight keys and one totalizer,each with range 0-
999,with buzzer at 100 and dual reset knob. It is manual counting for demonstrating how
the student counts manuall
8 Stop watches, Table model Stop watches
9 Microscope slides,
plain 72/box and frost 72/box (10 box from each type). 20 boxesx72slides/box x13
medical schools =18720 total slides (9360 plain slides and 9360 frost slides)
10 Cover slips glass, 22mm, 100 slides/box; 10 boxes each for 13 medical schools= 130 boxes
11
Universal Centrifuge. Bench top. Table top Centrifuge, adjustable speeds to 5,500 rpm, capacity of 15mlx8
With full accessories : Micro centrifuge tube with cap blue screw, printed graduated
cones, 50/rack tube, urine centrifuge with sediment bulb and flare
Two sets of spare carbon Brushes,
Power supply: 220v, 50/60Hz
12
Spirometer for students (Manual). Includes an oxygen connector for supplemental oxygen - convenient handle - flexible
popple tubing and bedrail holder. -2500ml capacity.
Made of heavy duty chrome plated steel with rubber bumper
standard size with adjustable back rest
mounted on castors with locks
adjustable to different position and with over bed table
Made of heavy duty chrome plated steel with rubber bumper
standard size with adjustable back rest
mounted on castors with locks
Pediatric size
15 Nasal speculum for different sizes Nose speculum adjustable size (0,2)
Hospital bed-child
14
Hospital bed - Adult 13
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
10 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
16 Specific gravity measuring device (Manual) Hand Held Digital Specific Gravity / Salinity Water Meter.
17 Snellen's chart Standard - for testing visual acuity
18 Ishihara Chart set Standard - for color blindness test
19
High power centrifuge machine
Maximum Speed (rpm) 18,000
Maximum Capacity 4 x 200 ml
Drive System Direct self-centering drive system with brushless induction motor
Braking System Dynamic electric brake system
Power Consumption 0.8 kVA- 2.0 kVA
Power supply 220V/50Hz
Includes all accessories such as sealing lids and tubes adaptor
Safety Features
Over speed detection
Imbalance detection and cut-off
Four point lid fixing
Automatic motor driven lid lock with emergency lid lock release
Stainless steel chamber with additional inner guard ring
20
High power centrifuge machine Materials of Construction: Steel and molded plastic case, aluminum shelves, foamed
polyethylene insulation, corrosion-resistant blue enamel finish, rubber feet
Temperature: Incubating temperature continuously adjustable between room ambient
and 55
0
C (131
0
F), thermostatically controlled and indicated by included thermometer.
Variation within 0.5 0 C in stable ambient.
Electrical Power: 230 volts 50/60 HZ
Power Requirement: 100 watt heater, actual power used depends on ambient
temperature and operating temperature control setting
Capacity:
Three fixed rack shelves spaced 1 (38 mm) apart. Shelf dimensions approximately 11
wide by 5 deep (270 mm x 140 mm).
Operating Conditions: 170 C to 270 C 20% to 80% relative humidity, no condensing
Altitude limit: 2,500 meters
20 Laboratory Incubator,
Low Speed Centrifuge, brushless motor, fixed angle rotor, LCD micro centrifuge,
microprocessor controlled.
A front panel LCD display is for displaying -Pre-set and remaining centrifugal time -Pre-
set and running speed. -Pre-set and running RCF
Max. Capacity 4 x 100 ml
Speed from 0-4000 rpm
Centrifugal chamber is made of stainless steel
Rotor is made from high-strength engineering plastics
The lid can be locked for operation safety.
Safety function:
operation
spinning with alarm beeps.
exceeding the pre-set speed.
Noise level is <65 dB
Power supply: 220V/50Hz
Electronic lid lock or Brushless motor.
21 Centrifuge machine
22
Anaerobic jar Anaerobic jar for culturing anaerobes and micro aerobes in lab. The jar seals easily; size
of 2-3 liters in sizes and models for creating rapidly and automatically anaerobic, micro-
aerophilic or capnophilic conditions in an anaerobic jar.
23
Petri dish, sterile 90x15mm/20pack of 10 =200dishes, petri, polystrene; external dimension:60mm
x15 mm growth area
24 Wire loop
Non-Calibrated Loop sizes: 3mm - 26 Ga. And 4mm - 26 Ga. 20 from each
20x2=40 x 13 schools=
25
Wire Loop Holder Loop Holder : Aluminum Loop Holder with PVC Handle 6in/150mm length and
7in/175mm length; 10 form each sizes total of 20
26
Microbiology prepared slides of the different
pathogens
100 slides all organs with the followng features: Through automatic cleaning process
Packed in convenient environment friendly cardboard boxes; Non-foggy;
Non-corrosive
Grade A quality
Clear or painted
Good air and water resistance
Ground edges
27 DVD/CD sets of mircobiology with simulation A full set 3D DVD/CD of microbiology with simulation
28 DVD/CD sets of Pharmacology with simulation A full set 3D DVD/CD of pharmacology with simulation
29
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
30 Catalogues Attach picture/catalogue of item offered
31 Packing Packing to be done according to UNOPS packing and Shipping Instructions
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
11 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
32 Brand Brand name / model number for all items
33 Origin Country of origin of all items
34
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
Skills Laboratory Equipments Standard for Medical Schools LOT5
1
STETHOSCOPE Stetescope with binaural unit,plain spring non folding frame,with plastic ear tips,black
vinyl stethoscope tubing double stem chest piece,combined bell and diaphragm sprague
bowless type.With spare pair of ear tips Stethoscope,foetal,Pinard,monaural,unbreakable
plastic,Standard Length 22/56 cm, 27/69 cm; Total Weight 165, 175 grams, Diaphragm
Diameter 1.7/4,3 cm, Bell or Small Diaphragm, Diameter 1.3/3,3 cm, black finish
chestpiece and eartubes
2 Sphygmomanometer:Aneroid Adult Aneroid type; Caliberation 0 to 300mm Hg;Complete with hook,velcro fabric cuff (adult
size),bulb and valve; precision manometer with clip for fix .With case.
3
Sphygmomanometer:Aneroid Baby Aneroid type;Caliberation 0 to 300mm Hg;Complete with hook,velcro cuff( Baby
size),bulb and valve,With zipper case
4
Sphygmomanometer: Mercurial Desk top Adult

Traditional blood pressure measuring instruments with mercury locking facility, Range 0-
300 mm Hg packed in lightweight metal case.
Features:
Easy to read with clear tube
Accurate reading
Emulsoid Bladder & Soft emulsoid Bulb
Mercury lock facility.
Accessories
Cotton/Nylon cuff
Latex Bulb and Inflation Valve
Technical Specification
Measure Scope: 0-300mHg
Accuracy: 3mmHg
Glass Tube: 3.5 to 4.0mm
5
REFLEX HAMMER Reflex hammer: 7"- 7.5", solid stainless steel handle with triangular rubber Head, rubber
ring Latex free packing
6
PENLIGHT Reliable, furnished, and ready to operate. Aluminum-cased reusable penlight with strong,
nickel-plated steel slotted pocket clip. Finished in multi-layered gloss metallic lacquer.
Two AAA heavy-duty zinc chloride batteries included.
Aluminum housing with metallic gloss lacquer
Activated by pressing top button
Option to "lock on" by twisting top mechanism
Measures 5 1/4" long, 1/2" diameter
Two AAA batteries included
7
TUNING FORK Tuning fork Medical: Alumminnium Alloy of different frequencies (128Hz, 256Hz,
512Hz) 3 of each 3X 3=9
8
Oral /Axillary thermometer (Mercury )
Clinical oral/Axillary thermometer (Mercury ) , Celsius scale (35
0
- 42
0
C) and Fahrenheit
(94
0
F - 108
0
F) , Supplied in protective case.
Lense front. Stubby bulb.
9 Oral /Axillary thermometer (Digital ) Basic Clinical oral/Axillary thermometer (Digital ), Celsius scale, with case .
10
Rectal Thermometer (Mercury )
Clinical thermometer (Mercury ) , Celsius scale (35
0
- 42
0
C) and Fahrenheit (94
0
F - 108
0
F) , Supplied in protective case.Lense front. Stubby bulb.
11 WEIGHING AND HEIGHT SCALE(Mechanical)
WEIGHING AND HEIGHT SCALE (Mechanical)
A weight scale measures body weight and height.
Wight measuring: maximum scale value is 120kg, the minimum centi-value is 0.5kg.
length measuring: measuring rang is 70-190cm,the minimum centi-value is 0.5cm error
0.5cm
Main board area:~(lengthwidthheight) 700280930mm.
Outer dimension:~ (lengthwidthheight) 700280930mm
Weight: ~20- 26kg.
Scale to put human body weight through lever system, transfer to measuring spring.
Alters the spring extending to index reverse rotation through teeth beltgear in the face
Rubber pedal sticks to main board as an anti slide.
Length scale consisting of three different diameter round pipe, the mid pipe and inner
pipe with length graduation cladded on the outer pipe in turn, when using, should stick at
any position, the top of inner pipe has adjustable measuring board, pull up the measuring
board, make it and pipe right angle ,
Warranty 3 years from date of delivery
12 BABY SCALE :MECHANICAL SLIDING WEIGHT BABY SCALE
BABY SCALE: MECHANICAL SLIDING WEIGHT BABY SCALE
With Baby tray, the Scale platform and
Baby tray to be mounted on the Scale platform
Scale platform : with sliding Weights and Sliding weight bar
Should have device locking the baby Tray with the Scale platform
Max. Capacity: ~16 kg
Graduation: 10 g
Dimensions~ (WxHxD): 550 x 195 x 300 mm
Weight: approx. 5,8 kg
Operating Manual English
Warranty 2 years from date of delivery
scale corresponds to standards and requirements of the European Directive
90/384/EEC.or equivalent
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
12 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
13
Light source (Lamp ) Color Temperature: 3600k AC: 95v-240v Power Supply: 30-50w Lamp Life: Halogen
2000h Spare Parts: Table Clip, Guide Rail Clip, Wall Clip, Floor Prop. N. W: 3.8kg
Packing Size: 850*210*250mm Feature: Material: Steel; to be deilverd with spare lamp
14
Negatoscop (Xray viewer) An aluminum frame.Thickness : 22mm. Size can be custom. Lighting source: T5 or Led.
LEDs on edges provide higher optical efficiency with lower power than CCFL and thinner
backlight design.
Excellent illumination, NO flickers, lifetime 90.000 hours, 12V voltage.
Power Supply: 220V/50, Life-time 90,000 hours,
15
MEASURING TAPE Measuring Tape : 200 cm; also measuring in inches; made of plastic or equivalent,
graduation to be clear and to be printer with durable colouring .
16
EXAMINATION COUCH EXAMINATION COUCHE
Basic examination couch :Suitable and stable for examining and treatment of an adult
patent
Made of Sturdy 32 mm tubular steel frame
Powder-coated finish
Vinyl(equivalent ) covered 40 mm foam padding
Adjustable head rest
Compatible with Casualty Couch accessories
Dimensions: ~L 1820 mm, W 610 mm, H 780 mm
17
BASIC OBSTETRICS/GYNECOLOGY
EXAMINATION COUCH
BASIC OBSTETRICS/GYNECOLOGY EXAMINATION COUCHES
Wiith two sectional mattress base with perineal cut suitable for Gynecological and
Obstetrics examination ,procedueres and delivery
Made of Sturdy 32 mm tubular steel frame
Powder-coated finish
Vinyl(equivalent ) covered 40 mm foam padding
Adjustable head and hind rest
Compatible with Casualty Couch accessories
Dimensions: ~L 1820 mm, W 610 mm, H 780 mm
18
Transfer BOARD TRANSFER BOARD
The Transfer Board should have
a smooth top and bottom surface which allows for easy, low
friction gliding, facilitating patient transfers.
Comfort, convenience and adaptability are built into this transfer board.
Manufactured from high impact polyurethane
six grab slots with rounded, smooth edges for operator ease.
Length Width Depth Weight ~125 cm 46 cm 0.5 cm 2.3 kg
19
EMERGENCY POLE STRETCHER EMERGENCY POLE STRETCHER
lightweight, high-strength emergency stretchers suitable for first aid response
made with PVC coated nylon covers (equivalent)that are heat sealed making them
resistant to blood, body fluids and mildew and easy to clean.
lightweight aluminum poles with contoured,
flexible hand grips for easy handling.
Hinges at the centre permitting the stretcher to dual fold for compact storage.
Color orange preferred
Carry cases.
Length Width Height Weight Load Limit
~ 231 cm 55 cm 14 cm 6 kg 159 kg
20
OPHTHALMOSCOPE SET A basic Ophtalmoscope set, with one-piece handle and diagnostic head. Mirror optical
system, with 16 viewing lenses from -15 to +20 diopters with bulb spare, supplied with
batteries protective case, padded
21
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
22 Catalogues Attach picture/catalogue of item offered
23 Packing Packing to be done according to UNOPS packing and Shipping Instructions
24 Brand Brand name / model number for all items
25 Origin Country of origin of all items
26
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT 6
1
OTOSCOPE SET Otoscope set,with one piece handle and diagnostic headfiber-optic light speculae 2.5,3,4,5
MM,Poly. Re-usable with Bulb/Globe Spare,supplied with batteries. Case, padded,
protective and storage
2
EAR SPECULUM OF DIFFERENT SIZES Specula ear,Gruber, set of 4 sizes:size 4. 5mm, 5.5mm, 6.5mm,7.5mm, brass chromium
plated
3 TONGUE DEPRESSOR WOODEN Tongue depressor wooden
4
TOUNGE DEPRESSOR(METALIC) Tounge depressor, metallic, Mayo or equivalent, 170x22mm, tapering to 15mm at narrow
end, both ends slightly curved in opposite direction, stainless steel
5 NASAL SPECULUM Nasal Speculum; Beckman type or equivalent; size medium 5 1/2" stainless steel
6
NASAL CATHETER For administration of oxygen for nasopharyngeal route - Length : 50cm; Sizes: FG 8, 10,
12, 14; dispossable ; made of clear material
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
13 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
7
OROPHARYNGEAL AIR WAY OROPHARYNGEAL AIR WAY of different size (6 different sizes) 4 from each size for
training. Soft, clear PVC plastic. 4 from each size:
Size for Newborn, 40mm
Size for Infant, 50mm
Size for Small Child, 60mm
Size for, 70mm
Size for Med. Adult, 90mm
Size for Large Adult, 100mm. 4x6x13 medical schools =

8
LARYNGIOSCOP SETS Basic Laryngoscope set, Macintosh folding pattern,with large handle to take, two R14
batteries,Satin chrome-plated brass with a knurled finish and with 3 blades; blades should
be autoclavable
9 ENDO-TRACHEAL TUBES CUFFED
ENDO-TRACHEAL TUBES CUFFED for training reusable
Thin-walled and flexible cuff
Standard 15 mm connector
Pilot balloon with self sealing valve
Graduation marks to aid correct positioning
Sizes : 4 sizes ID (Inside diameter),OD(Outside diameter),Length(including connector)
a)2.5 mm ,3.6 mm, 171 mm b)3 mm, 4.3 mm ,190 mm c) 5.5 mm 6.9 mm 274 mm d) 6.6
mm 8.2 mm 317 mm
10 INTUBATION STYLET :
INTUBATION STYLET :To fit the Endothracieal tube with 4 sizes ID (Inside
diameter),OD(Outside diameter),Length(including connector) a)2.5 mm ,3.6 mm, 171 mm
b)3 mm, 4.3 mm ,190 mm c) 5.5 mm 6.9 mm 274 mm d) 6.6 mm 8.2 mm 317 mm
11 ENDOTRACHEAL TUBES UNCUFFED
ENDOTRACHEAL TUBES UNCUFF ED for training reusable
Smooth beveled and moulded a traumatic hooded tip
Graduation marks to aid correct positioning
Standard 15 mm connector
Clear material allows visualization of condensed exhaled air
Sizes : 4 sizes ID(Inside diameter);OD(Outside diameter);Length (including connector)
a)2.5 mm ,3.6 mm, 171 mm b)3. 3 mm 4.3 mm 190 mm c)5 5 mm 6.9 mm 274 mm d)6.5
mm 8.8 mm 327 mm
12 OXYGEN CYLINDER (12 litters)
OXYGEN CYLINDER SPECIFICATIONS :
Capacity: 12 Liter
O2 Regulator
O2 Humidifier
Adult mask
Infant mask
Nasal tube
O2 tubing
13
RESUSCITATOR BAG (AMBO BAG) WITH
MASK (ADULT & PEDIATRICS) set
RESUSCITATOR BAG (AMBO BAG) WITH MASK (ADULT &PEDIATRICS) Set
SPECIFICATIONS :
Hand held silicon type.
Main unit consists of :
Pressure regulator with mask and plastic hood.
Face mask for child (3 pieces)
Face mask for adult (3 pieces).
Oxygen reservoir bag with safety valve (1 piece)
Oxygen feeding tube ( 4 pieces)
Including carrying bag.
Specifications :
Self inflating bag volume: approx 1600ml
Oxygen reservoir bag volume : approx 2600 ml , autoclavable
Materials:
Self inflating bag: semi.
Transparent silicon rubber.
Valve housing : transparent polysulfone
Shell of mask: transparent polysulfone.
Cushion of mask: transparent silicon rubber
14
SIMPLE OXYGEN MASK SIMPLE OXYGEN MASK
Medium concentration, barbed fittings to prevent patient disconnect, elastic strap,
adjustable nose clip, Reusable 10 adult size and 10 Pediatric size .
Adult with 7' tubing,
Pediatric with 7' tubing
15
CLEAR CURVED SOFT TIP NASAL PRONGS CLEAR CURVED SOFT TIP NASAL PRONGS
Clear curved pediatric cannula with 7' Sure Flow tubing, 50/case
Clear curved adult cannula with 7' Sure Flow tubing, 50/case
50 Adult suze, 50 pediatric size, preferabliy reusable
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
14 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
16
AIRWAY MANAGEMENT TRAINING
MANIKIN
AIRWAY MANAGEMENT TRAINING MANIKIN
Anatomically accurateadult head and torso including (Adult and Pediatic size) two
form each size
oral cavity, oropharynx, larynx, trachea and lungs
Ability to confirm successful intubation by auscultation over intact chest wall
Realistic tracheostomy training, care, and suctioning
Surface should be washable with soap and water
.
17
CPR CHILD MANIKIN Child patient care mankin with rotatable arms and legs and articulating hand, allows
training of basic and advanced patient care. ~Weight :- 2.95kg
Dimensions :- 14 x 7 x 23
Descriptions :- Professional Child CPRAED Training Manikin (with CPR Monitor) with
6-8 Child ;Color Prefered Dark Skin; FaceShield LungBags, with English instruction
Sheet and a carrying case.
18
ADULT MANIKIN MALE Basic Adult patient care Manikin, Malefeatures, full size adult with movable joints, as
well as soft fingers and toes, include IM, IV, Subcutaneous injections, soft hand for finger
prick, and stomies, allows basic & advanced patient care. Should be designed to deliver
comprehensive BLS training for professional rescuers.Should includes: 4 decorated Face
Skins, 3 disposable Airways, Carrying Case, Track Suit, and 50 Manikin Wipes.
19
ADULT MANIKIN FEMALE Basic Adult patient care Manikin, femalefeatures, full size adult with movable joints, as
well as soft fingers and toes, include IM, IV, Subcutaneous. injections,soft hand for finger
prick, and stomies, allows basic & advanced patient care. Should be designed to deliver
comprehensive BLS training for professional rescuers.Should includes: 4 decorated Face
Skins, 3 disposable Airways, Carrying Case, Track Suit, and 50 Manikin Wipes.
20
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
21 Catalogues Attach picture/catalogue of item offered
22 Packing Packing to be done according to UNOPS packing and Shipping Instructions
23 Brand Brand name / model number for all items
24 Origin Country of origin of all items
25
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT 7
1
ADULT CARDIO-PULMONARY
RESUSCITATION TRAINING MANIKIN
ADULT CARDIO-PULMONARY RESUSCITATION TRAINING MANIKIN
Anatomically accurate full-body adult manikin with correct palpable
anatomical landmarks including :
Xiphoid process, ribs and nipple,disposable upper and lower airways
Head, neck and jaw should be fully articulated to allow for head tilt/chin lift and jaw
thrust maneuvers
Chest wall should allow for realistic chest compressions and simulate rise and fall during
ventilation
Sensors attached to manikin should be able to detect inflation volume and depth of chest
compression which is indicated to the performer via a monitor /performance indicator
Surface should be washable with soap and water
2
INFANT CARDIO-PULMONARY
RESUSCITATION TRAINING MANIKIN
INFANT CARDIO-PULMONARY RESUSCITATION TRAINING MANIKIN
Anatomically accurate full-body infant size manikin with correct
palpable anatomical landmarks including
xiphoid process, ribs and nipple, disposable upper and lower airways & palpable
simulated
carotid pulse
Head, neck and jaw should be fully articulated to allow for head tilt/chin lift and jaw
thrust maneuvers
Chest wall should allow for realistic chest compressions
Sensors attached to manikin should be able to detect inflation volume and depth of chest
compression which is indicated to the performer via a monitor /performance indicator
Surface should be washable with soap and water
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
15 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
3
BASIC LIFE SUPPORT MANIKIN WITH
INDICATOR
BASIC LIFE SUPPORT MANIKIN WITH INDICATOR
Should have natural obstruction of the airway to allows students to learn the important
technique of opening the airway so that in real-life situation they know how to effectively
administer air to the victim.
Head tilt/chin lift or jaw thrust should be there to allows students to correctly practice
airway maneuvers necessary when resuscitating a real patient.
It should provide realistic chest rise to verify correct ventilations.
Realistic resistance for chest compressions should be there to allows the students to
experience the amount of pressure needed to perform proper chest compressions in a real-
life situation.
Anatomically correct landmarks and sternal notch allow the student to practice
identification of all anatomical landmarks relevant to CPR
Ceratoid pulse must be there to simulate realistically check for pulse.
Provided with disposable non-rebreathing airways. Face mask are suitable for use by
more than one student during class and are quick and easy to change after each training
session.
Skill Guide CPR performance indicator provides immediate objective feedback on
correct inflation volume, excessive inflation, too fast inflation, correct compression depth,
excessive compression and in correct hand position.
Must have hard carrying case.
Cleaning kit should be provided for easy cleaning after
4
ADULT CARDIO-PULMONARY
RESUSCITATION DEFIBRILLATION
MANIKIN
ADULT CARDIO-PULMONARY RESUSCITATION DEFIBRILLATION
Anatomically accurate full-body adult manikin with correct palpable
anatomical landmarks including :
xiphoid process, ribs and nipple, disposable upper and lower airways and automatically
generated carotid pulse
Head, neck and jaw should be fully articulated to allow for head tilt/chin lift and jaw
thrust maneuvers
Cardiac rhythm simulator should generate various rhythm patterns which also responds
to defibrillation
The training system should be able to work with all types of defibrillators
Chest wall should allow for realistic chest compressions
Sensors attached to manikin should be able to detect inflation volume and depth of chest
compression which is indicated to the performer via a monitor /performance reporting
system
Performance reporting system should provide printed feedback to performer
Surface should be washable with soap and water
5
THRACIOSTOMY TUBE Thraciostomy Tube with rotating lock (Metalic), sizes 5, 7 ,and 8, stainles steel, 3
from each size 3x3=9
6
MULTIPURPOSE ADULT AIRWAY TRAINER
MANIKIN (tracheostomy, cricothyrotomy, and
pneumothorax decompression)
MULTIPURPOSE ADULT AIRWAY TRAINER
Should have anatomically accurate features enable extensive training in a variety of
airway techniques.
Fully articulated to allow head tilt/chin lift
Soft neck with cricocartilage permits classic Sellick maneuver
18mm airway permitting passed of cuffed ET tube or EOA
Adult airway management trainer
Students learn oral and nasal techniques for opening airways
Allows training for tracheostomy, cricothyrotomy, and pneumothorax
decompression
Includes 6 neck collars, 3 cricocartilages, and membrane tape
Includes trainer carrying bag
7
CHEST TUBES CHEST TUBES 5 from Each size
Chest Tubes (Reusable) With Trocar Size 12.
Chest Tubes (Reusable) With Trocar Size 14,
Chest Tubes (Reusable) With Trocar Size 22
Chest Tubes (Reusable) With Trocar Size 26
8
Water seal chest drainage set & chest tube Chest aspirating set with 2 drainage bottle , tubing,and with aspirating needle of 2 way
Luer lock stopcock 16gx3" and 18gx3"
9
PNEUMOTHORAX MANAGEMENT
TRAINING MANIKIN
PNEUMOTHORAX MANAGEMENT TRAINING MANIKIN
Anatomically accurate torso with encased ribs
Replaceable chest wall which can be used for a minimum of 20 incisions both in mid-
axillary and subclavian sites
Pleural cavity and lungs with bilateral tension pneumothorax which can
be decompressed
Surface should be washable with soap and water
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
16 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
10
THORACENTHESIS NEEDLE THORACENTHESIS NEEDLE, hypodermic,1.6x100mm,luer with stop cock and tubing
for drainage
11
DEFIBRILLATOR DEFIBRILLATOR
TECHNICAL SPECIFICATIONS
Biphasic, Manual and AED with voice prompt, compact and light weight
Energy selection 5J to 200J in steps.
Momentary energy selection access on front panel.
Should have adult and pediatric paddles integrated on same handle.
Momentary charge key on front panel and on the apex hand.
Monitor should display selected and delivered energy
Should have disarm facility.
Energy should be delivered within 30ms after the detected R wave in
synchronization mode.
Charging time maximum 5 sec for 200J.
Should have battery backup for 50 discharges of 200J.
Should supply three pairs of AED pads
Should operate on mains 230V, 50Hz
Should have safety certificate from a competent authority CE / FDA (US) /
12
ELECTROCARDIOGRAM 12 LEAD ELECTROCARDIOGRAM 12 LEAD with accessaries
SPECIFICATIONS :
Leads: 12 standard leads acquired simultaneously and continuously
Three real times continuous with rhythm, interpretation and measurementsAdult and
Pediatric
writer speed : 5,10,25 or 50mm/sec
LCD display : backlit graphic display around 5
display channel:1, 3, 6 ,12
operation modes : Auto or Manual
Copy button for generating multiple copies
Thermal printer
Rechargeable battery
Battery power capacity not less than two hours
Power:220V AC 50/60Hz
Cart Is included
Cable holder is included
ECG cable
Limb electrodes 4
Chest pump electrodes 8
Jell tube 5
ECG paper roll10, with additional spare batteries, power must be country standard
220V/50Hz
13
PUlSE OXYMETER Technical Specifications
Pulse Oximetry
Range: 0% to 99%
Resolution: 1%
Accuracy: 70% to 99% range: 2%
Method: Dual wavelength LED
Heart (Pulse) Rate
Range: 20 to 300 bpm
Resolution: 1 bpm
Accuracy: 1 bpm or 1%, whichever is greater
Alarms
Indication: Audible, visual (EN475); adjustable volume
Silence: Temporary (2 minutes) and Permanent
Parameter/Range: High Saturation: 70% to 98% or Off;
Defaults: Off
Low Saturation: 30% to 99% or Off at 85%
High Pulse: 80 to 250 bpm or Off;
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
17 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
14 Male Uretheral/Suprapubic Catheterization Trainer
Manikin
Male Catheterization Simulator for Skills of Catheter insertion Urtthral /Suprapubic
Anatomically accurate model of the male pelvis including bladder,
penis, urethra with mucosal folds, bulbous urethra & internal sphincter,without the legs
.The suprapubic bone should be visable.
A pressurised fluid system should allow for fluid/ urine flow when
catheter enters bladder
Urethra and sphincter should provide a realistic tactile sensation to the
performer.
A rubber catheter 16 CH is supplied with each male trainer
A rubber catheter 14 CH is supplied with each female trainer
A kidney dish, lubricant application and bladder syringe are supplied with each trainer
A suprapubic skin pad with bladder plug is supplied with each trainer
Bladder pressure can be altered
Surface should be washable with soap and water
15
Female Uretheral/Suprapubic Catheterization
Trainer
Female Catheterization Training Simulator

Female Catheterization Simulator for Skills of Catheter insertion Urethral /Suprapubic
Anatomically accurate model of the female pelvis including features of the female
genitalia without legs .The supra-pubic bone should be visible.
A pressurized fluid system should allow for fluid/ urine flow when catheter enters
bladder
When the catheter reaches the bladder, urination should be simulated.(e.g. Water)
Urethra and sphincter should provide a realistic tactile sensation to the
performer.
A suprapubic skin pad with bladder plug is supplied with each trainer
The simulator should allow bladder pressure changes.
The transparent urethra and the bladder models should allow through the transparent
walls, facilitating anatomical comprehension.
Surface should be washable with soap and water
16
Rectal tube Tube rectal: Child size #12 - #14 & Adult size #14 - #24, open tip one eye, funnel end,
sterile, reusable, rubber. 130 from child and adult sizes. Total 260 rectal tubes
17
Naso-gastric Tube (Adult and Ped) Pediatric: Tube, gastric feeding size ch 8 infant, 380mm long, distal end with 2 windows,
proximal end with protective lid, anatomical marking, sterile, reusable Adult: Tube, nasal
feeding, size ch 16,400mm, open tip, one eye, funnel end, open tapered end to
accommodate funnel, reusable, soft rubber, non-sterile supplied with funnel. 195 from
each size. Total 390 tubes
18
DIGITAL PROSTATE EXAMINATION
TRAINING MODEL
DIGITAL PROSTATE EXAMINATION TRAINING MODEL
Accurate anatomical model of the male pelvis including:
buttocks, anus, rectum and prostate, mounted in the left lateral position
Anus, rectum and prostate should have a realistic feel allowing the examiner to
appreciate the surface features, consistency and size of these organs
The prostate should be detachable and interchangeable allowing simulation of various
clinical scenarios including normal prostate, benign hypertrophy and carcinoma
Several rectal conditions should also be simulated
Surface should be washable with soap and water
19
Peritoneal biopsy needle Specification: #25 (12G) L 85mm
Description: Used for puncturing human peritoneal, hooking up peritoneum biopsy and
cell tissue.
20
LUMBAR PUNCTURE SIMULATION MODEL LUMBAR PUNCTURE SIMULATION MODEL
Set includes:
1 Lumbar region model
6 Puncture blocks: 2 normal CSF, 1 obesity CSF, 1 senior CSF, 1 senior obesity CSF, 1
epidural
1 Lumbar region skin cover
3 Lumbar region support bases: sitting position, lateral position, team teaching
1 Lumbar spine model
1 set of irrigator bag, tube, support base and syringe
1 Guidebook in English
21
LUMBAR PUNCTURE NEEDLE LUMBAR PUNCTURE NEEDEL 18G, 21G Reusable stainles steel 10 from each size
22
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
23 Catalogues Attach picture/catalogue of item offered
24 Packing Packing to be done according to UNOPS packing and Shipping Instructions
25 Brand Brand name / model number for all items
26 Origin Country of origin of all items
27
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT 8
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
18 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
1
INJECTION TRAINING PAD INJECTION TRAINING PAD
Realistic soft tissue layers including epidermis, dermal, sub dermal and muscle layers
Pad should allow intra-dermal, subcutaneous and intra-muscular injection
techniques
Pad should have a curved lifelike profile
2
VENEPUNCTURE TRAINING PAD VENEPUNCTURE TRAINING PAD
Strap on pad with realistic soft tissues layers with at least three palpable and infusible
veins
Veins should have self-sealing characteristics which will allow for repeated penetration
Veins should be connectable to a blood reservoir system which simulates blood flow
3
VENEPUNCTURE TRAINING MODEL HAND VENEPUNCTURE TRAINING MODEL HAND
Anatomically accurate adult hand
with skin and palpable & infusible dorsal veins
Pad should contain at least three vein of differing sizes including a paediatric size
Skin and vein system should be replaceable
Veins should have self-sealing characteristics which will allow for repeated penetration
There should be realistic flashback of blood following intravenous penetration
Surface should be washable with soap and water
4
PERIPHERAL INTRAVENOUS THERAPY
TRAINING ARM MODEL
PERIPHERAL INTRAVENOUS THERAPY TRAINING MODEL
Anatomically accurate arm with
palpable and infusible cephalic, median cubital, basilic and dorsal veins & palpable radial
artery
Skin and vessels should be replaceable
Skin should be allow realistic feel during procedures
Veins should have self-sealing characteristics which will allow for repeated penetration
There should be realistic flashback of blood following intravenous
penetration
Radial artery should have realistic pressure allowing for flashback durin arterial
puncture
Surface should be washable with soap and water
5
SURGICAL DISSECTION PAD (SMALL) SURGICAL DISSECTION PAD (SMALL)
Realistic multilayered soft tissue pad including at least 4 vessels
(veins, arteries and capiiliary vessels) which should allow for a wide variety
of incisions, dissection, ligation, suturing & stapling
Should be designed to provide a realistic sensation during procedures
6
SURGICAL DISSECTION PAD (Large ) SURGICAL DISSECTION PAD (Larg )
Realistic multilayered soft tissue pad including at least 10 vessels
(veins, arteries and capiiliary vessels) which should allow for a wide variety
of incisions, dissection, ligation, suturing & stapling
Should be designed to provide a realistic sensation during procedures
7
WOUND CLOSURE TRAINING PAD WOUND CLOSURE TRAINING PAD
Realistic soft tissue layers including epidermis, dermal and subdermal layers which should
allow for a wide variety of
incisions,
simple & advanced suturing techniques,
stapling and use of skin adhesives Skin pad should provide realistic tactile sensation to
the trainee
All layers should provide realistic retention of sutures
Pad should be mountable on a jig
8 FETOSCOPE Fetoscope, foetal, Pinard, monaural, unbreakable plastic
9
VAGINAL SPECULUM (bivalve) Larg sized: Vaginal speculum (bivalve) Graves, large 115mmx35mm, bi-valve
(Duckbill), stainless steel,
10
Vaginal Speculum medium size Medium sized : Vaginal speculum (bivalve) Graves, medium 1 3/8 "x4 ''bi- valve
(Duckbill),stainless steel,
11
Vaginal Speculum small size Small size : Vaginal speculum (bivalve) Graves, small, 75mmx20mm, bi-valve
(Duckbill), stainless steel,
12
FEMALE PELVIC EXAMINATION TRAINING
MODEL
FEMALE PELVIC EXAMINATION TRAINING MODEL
Anatomically accurate model of the female pelvis & perineum including:
external genitalia, urethra, vagina, cervix, anus and rectum
Model should allow for the insertion of different uterine assemblies
simulating different pathologies
Model should be designed to allow digital examination, bimanual examination, speculum
insertion, cervical smear procedure, catheterization,and digital rectal examination
procedures
The perineal skin, labia, vaginal surface, cervix, anus and rectum should provide a
realistic tactile sensation of the consistency and texture of these organs & tissues
Surface should be washable with soap and water
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
19 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
13
Birth simulator
BIRTHING SIMULATOR
The simulator should enables
Instructors to effectively teach the complexities associated with birthing.
Participants can experience childbirth and practice the skills required for successful
deliveries.
Should have detachable abdominal and perinea skin enables visualization of internal
maneuvers and fetal positioning during training.
learners to see how maneuvers affect the fetus in-utero.
force monitoring provides a visualization tool for proper assisted delivery.
learners see and feel the appropriate force required with hands on experience and
feedback.
Articulating baby should be presented in multiple positions to represent difficult and
routine deliveries
Product should have the following Featuers
Anatomically accurate perineum and pelvic floor muscles, with bony pelvis .
The abdominal skin should be removed to display anatomical structures and fetal
positioning
Representative full term baby with:
o Palpable fontanel and suture lines
o Palpable clavicles and scapulae
o Detachable placenta with cord
Mother allows for multiple delivery positions and techniques:
o Normal delivery
o Breech delivery
o Vacuum delivery
o Shoulder dystocia management
o Forceps delivery
14
Episiotomy suturing simulator EPISIOTOMY REPAIR TRAINING MODEL
Anatomical accurate model of the female perineum with external genitalia,
Vagina and cervix inclusive of vaginal mucosa,
Perineal muscles and skin in relevant layers which allows for realistic repair
Perineal pad should be replaceable
All layers should allow for repeated suturing
Set to include mid-line,and left and right medio-lateral repairs. Surface
should be washable with soap and water
15
Delivery sets A range of surgical instruments that offer delivery set that are used across various
maternity hospitals which are carefully manufactured that ensures flawless range of
delivery set. These sets are designed keeping in mind its application and are safe and
hygienic to use. It assist the surgeons to carry their task efficiently and with ease. [Mixing
solution Bowl 3Qt (1), iodine cup 6 Oz 3 7/16" x2" (2), Emesis Basin 12 Oz (1), Instr
Tray 12 1/4x7 3/4x2 1/4" (2), Tray Cover for 10-1877 (2), Roch Ochsner Forceps
Straight 1x2 7 1/4 (2), Spencer Wells Forceps Straight 5" (2) ore its equivalent, Spencer
Wells Forceps Straight 8" (2) or its equivalent, Rampley Sponge Forceps 9 3/4" (2) or its
equivalent, Scalpel Handle #4 (1), Javerts Placenta Forceps Serrated 9 1/2 (2) or its
equivalent, Umbilical Scissors 4" (1)
16 Delivery forceps Simpson obstetrical forceps or its equivalent size 23 cm
17
UMBILICAL CORD CATHETERISATION
TRAINING MANIKIN
UMBILICAL CORD CATHETERISATION TRAINING MANIKIN
Anatomically accurate full body neonatal size manikin
With retractable umbilical cord,
umbilical arteries and umbilical vein
allowing for umbilical vein catheterization
Surface should be washable with soap and water
18
NEONATAL VASCULAR ACCESS TRAINING
MANIKIN
NEONATAL VASCULAR ACCESS TRAINING MANIKIN
Anatomically accurate full body neonatal manikin
with palpable and infusible medien cubital, basilic, axillary, saphenous, popliteal, frontal,
temporal, external jugular and umbilical veins, accurate nasal cavity, nasopharynx,
oropharyx, trachea & airways
Skin and vessels should be replaceable
Skin should be allow realistic feel during procedures
Veins should have self-sealing characteristics which will allow for
repeated penetration
There should be realistic flashback of blood following intravenous penetration
Surface should be washable with soap and water
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
20 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
19
NEONATAL RESUSCITATION TRAINING
MANIKIN
NEONATAL RESUSCITATION TRAINING MANIKIN
Anatomically accurate full-body neonatal size manikin with correct palpable
anatomical landmarks including
xiphoid process, ribs and nipple, oropharynx,larynx, trachea, bronchi, lungs, oesophagus
and stomach & retractable umbilical cord
Chest wall should allow for realistic chest compressions
Larynx, trachea, bronchi should be designed to allow insertion of oral and
nasal airways
Esophagus and stomach should allow insertion of nasogastric and
orogastric tubes
Umbilical cord should allow umbilical catheterization
Surface should be washable with soap and water
The manikin should be supplied with
with oxygen reservoir tube,
transparent face mask, size0A,
Rendell-Baker masks, sizes 0,1 and
extension tube,60cm,
uni-suction pump, basic model, suction booster,
oxygen cylinder, 2 litres, and oxygen regulator
20
CPR BABY MANKIN CPR baby mankin: Airways open only when the CPR manikin head is correctly
hyperextended. Stomach inflation indicated by a whistling sound. Should come with 2
face pieces & 25 disposable head bags. ACD CPR-compatible (optional ACD CPR base
board). Dimensional ~Weight: 34 lbs. Dimensions: 32x11x19cm
21
PAEDIATRIC AIRWAY MANAGEMENT
TRAINING MANIKIN
PAEDIATRIC AIRWAY MANAGEMENT TRAINING MANIKIN
Anatomically accurate pediatric size head and torso including
oral cavity , oro-pharynx, larynx, trachea and lungs
Palpable carotid pulse
Ability to confirm successful intubation by auscultation over intact chest wall
Surface should be washable with soap and water
22
Infant IV Training Arm Infant IV Training Arm (medical model, nursing model,educational equipment)
Size: 64x14x10.5cm
G.W.: 4kg
23
VENOUS CUT-DOWN PAD VENOUS CUT-DOWN PAD
Realistic soft tissue layers including epidermis and subdermal layers with a minimum of
three veins, which should be
palpable through the skin and
may be filled with simulated blood
Veins should have self-sealing characteristics allowing for repeated penetration
24
Bone marrow puncture needle/aspiration set Bone marrow puncture needle
Length: 25-50mm Stain less steel
Description
1. Used for puncturing skeleton,removing bone marrow and injecting liquid medicine.
2. Sharp and hard of cutting edge.
3. Can adjust the length of extended needle.
25
DVD/VCD of emergency team in action DOT Medical First Responder
First Responder:
To provides the skills and confidence required to be the first to respond to an accident or
disaster scene. This is the introductory class to becoming an EMT and provides the
essential elements to springboard into the field of EMS or provide critical initial care until
more advanced care arrives. It is hands-on & promotes problem solving skills necessary
for proper care for patients in the municipal or private sectors. Upon completion of
course, student receives both CPR & First Responder certificates. 40 hours
* Text provided: Brady First Responder 8th Edition
Topics covered:
-Introduction to EMS Systems
-Legal and Ethical Issues
-Well-Being of the First Responder
-Human Anatomy
-Lifting, Moving and Positioning Patients
-Airway Management
-Assessment of the Patient
-Resuscitation and the use of the AED
-Caring for Medical Emergencies
-Caring for Soft Tissue Injuries, Bleeding and Shock
-Caring for Muscle and Bone Injuries
-Caring for the Geriatric Patient
-Pregnancy and Childbirth
-Caring for Infants and Children
-EMS Operations
-Multiple-Casualty Incidents, Triage, and the Incident Management System
****www.training-classes.com/course_hierarchy/OSHA_Safety
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
21 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
26
DVD/VCD on Physical examination of the body
systems :10 sets (one comprehensive set from each
system)
Physical Examination and Health Assessment DVD Series: DVD 10: Neurologic: Cranial
Nerves and Sensory System, Version 2- VIDEOS IN THE SERIES
1: Neurologic: Motor System and Reflexes
2: Head, Eyes, and Ears
3: Nose, Mouth, Throat, and Neck
4: Breasts and Regional Lymphatics
5: Thorax and Lungs
6: Cardiovascular System: Heart and Neck Vessels
7: Cardiovascular System: Peripheral Vascular System and Lymphatic System
8: Abdomen
9: Musculoskeletal System
10: Neurologic: Cranial Nerves and Sensory System
11: Male Genitalia, Anus, Rectum, and Prostate
12: Female Genitalia, Anus, and Rectum
13: Head-to-Toe Examination of the Pregnant Woman
14: Head-to-Toe Examination of the Neonate
15: Head-to-Toe Examination of the Child
16: Head-to-Toe Examination of the Adult
17: Head-to-Toe Examination of the Older Adult
27
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
28 Catalogues Attach picture/catalogue of item offered
29 Packing Packing to be done according to UNOPS packing and Shipping Instructions
30 Brand Brand name / model number for all items
31 Origin Country of origin of all items
32
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
LOT 9
1 Refrigerator
128L commercial upright fridge with compressor; big loading qty: 496 ctns; Power
supply must be 220V/50Hz
2 Hot Air Oven
Heat Circulation : Horizontal Fan Assisted
Usable Volume : not less than 3.3cubic feet
Capacity : Up to 4 perspiroMETER Units
No. of Shelfs : 2 Stainless Steel Shelves (Detachable)
Maximum Temperature: Ambient to 250
0
C
Least Count : 1
0
C
Accuracy : + 2
0
C
Heater Capacity : 750 watt x 2 Heaters = 1500 Watt
Electric Supply : 220 + 10%Volt. 50 Hz Single Phases. AC.
3
Bunsen burner Bunsen burner with Stop Cock. Nickel plated burner tube of brass 12 mm& 11mm
diameter with air regulator adjustable and a cylindrical riffled connector, mounted on an
painted metal base. Suitable for Natural gas. Brass Tube 90 x 11mm height x diameter.
Base 90mm diameter. Over all height 130 mm.
4
Delivery period Delivery time to Fededral Ministry of Health Warehouse, Addis Ababa, Federal Republic of
Ethiopia from date of receipt of purchase order must not exceed 90 days (Please specify)
5 Catalogues Attach picture/catalogue of item offered
6 Packing Packing to be done according to UNOPS packing and Shipping Instructions
7 Brand Brand name / model number for all items
8 Origin Country of origin of all items
9
Warranty Warranty if different from manufacturers . Warranty begins from date of acceptance of
goods by UNOPS Ethiopia. (Please specify)
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
22 of 23
UNOPS/Ethiopia Office/86214/ITB/GOODS/2013-002
Supply and Delivery of Medical and Laboratory Equipment to the Federal Ministry of Health Warehouse, Addis Ababa, Ethiopia)
Annex II
SPECIFICATIONS: All goods to be considered must conform with the below specifications. For electrical equipment, goods must meet with standard in Ethiopia .
Company Name:
Name of Company Representative
Email of Company Representative:
Telephone ( Landline):
Telephone (Mobile):
Signature of Company Representative:
23 of 23

Você também pode gostar