The strong, reliable Watertec 12 drilling rig has a pullback capacity of 12,800kg and is able to operate in some of the world's harshest conditions. Ideal for charities, NGOs, government bodies, private contractors and anyone looking to drill medium to deep water wells.
The strong, reliable Watertec 12 drilling rig has a pullback capacity of 12,800kg and is able to operate in some of the world's harshest conditions. Ideal for charities, NGOs, government bodies, private contractors and anyone looking to drill medium to deep water wells.
The strong, reliable Watertec 12 drilling rig has a pullback capacity of 12,800kg and is able to operate in some of the world's harshest conditions. Ideal for charities, NGOs, government bodies, private contractors and anyone looking to drill medium to deep water wells.
Providing water to communities throughout the world, the strong, reliable Watertec 12.8 drilling rig has a pullback capacity of 12,800kg and is able to operate in some of the worlds harshest conditions. Ideal for a wide range of customers including charities, NGOs, government bodies, private contractors and anyone looking to drill medium to deep water wells.
Dando Watertec 12.8 Drilling Rig Specifcation Carrier Options Heavy duty commercial 4x4 or 6x6 truck - Crawler mounted - Trailer mounted - Mounted on customer own support vehicle/structure Deck Engine Standard ftting: 540 HP diesel engine (optional 250 HP for mud drilling applications only) Mast Dimensions Working mast height using main winch: 9140mm Working mast using the rotary head: 7600mm Mast Capacity Pullback: 12800kgf Pulldown: 7500kgf Hook load (max): 12800kgf Rotary Head Performance Standard Rotation (max) 190rpm Torque (max) 8850Nm Other options available Rotary head tilt and side shift Drill Table and Break Out System As standard - Box type drill table with removable drill rod and casing guides. Break out system is a double acting hydraulic cylinder with adjustable wrench. Other options available Standard Compressor Ingersoll Rand XHP 900 (900CFM/350psi.) Other options available Main Winch (Other options available) Maximum single line pull: 7800kgf Tool Handling Winch Maximum single line pull: 2040kgf Maximum speed: 40m/ minute Drum capacity: 57m of 12mm wire rope Mud Pump Standard: Hydraulically driven 5-1/2 x 8 duplex mud pump Maximum fow rate: (222gpm) 840 litres/minute Maximum discharge pressure: 338psi Foam Pump Standard: Hydraulically driven duplex pump Maximum fow rate: 34 litres/minute Maximum discharge pressure: 750psi Inline Oil Lubricator Fitted as standard and used when operating a DTH hammer Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves Drillers Control Panel Uncomplicated and user friendly with ergonomic layout Rod Spin Safety Guard Various options available Levelling Jacks Two front and two rear jacks with individual locking valves Lighting and Electrical System Rig is provided with mast and control panel lighting. Electrical system is 24 volt Drilling Capacities* 31/2 (13.5kgs/m) drill rod = 948m 41/2 (23kgs/m) drill rod = 556m Optional Equipment RC Drilling Conversion Kit - For reverse circulation drilling applications Pipe Handling Boom Crane - For loading and unloading drill pipe and light site work Pipe Handler- For increased safety when loading drill pipes Drill Pipe Rack - Mounted on carrier Other options available on request Dando Drilling International Limited www.dando.co.uk info@dando.co.uk tel: +44 (0) 1903 731312 fax: +44 (0)1903 730305 * Depths stated are theoretical and based on 100% capacity of the machine. Depths achieved will depend on variables including ground conditions and capability of crew operating the machine. Please note: All fgures and claims made here are indicative and Dando Drilling International reserves the right to make alterations to specifcation detail without notice. All images are for reference only and may not represent the exact specifcation outlined in this document.