Você está na página 1de 5

Cara buat Wifi AdHoc di Windows 8 dan 8.

1
1. Pertama kali kita periksa apakah komputer kita mendukung untuk membuat Wirele
ss ad-hoc. Caranya buka Start Screen lalu ketikkan "CMD" , pilih "Command Prompt
" lalu klik kanan > Run As Administrator.
Kemudian akan muncul jendela Command Prompt. Lalu ketikkan:
"netsh wlan show drivers"
lalu tekan tombol enter, kemudian periksa pada baris Hosted network supported ,
jika "Yes" maka komputer ada mendukung untuk membuat wireless Ad-Hoc , namun ji
ka berkata "No" maka ada harus upgrade perangkat keras komputer anda.
2. Langkah kedua , masih di Command Prompt dengan mode Run as Administrator, ket
ikkan
"netsh wlan set hostednetwork mode=allow ssid=NAMA JARINGAN key=PASSWORD"
lalu tekan tombol enter. Untuk ssid adalah nama wireless adhoc , sedangkan key a
dalah password wireless network. Ada dapat mengubah keduanya sesuai yang ada ing
inkan dengan syarat passwor minimal 8 karakter.
3. Langka ketiga adalah memuali wireless adhoc yang ada buat, ketikkan
"netsh wlan start hostednetwork"
di commad prompt lalu tekan tombol enter.
Selamat telah berhasil membuat Wireless adhoc di Windows 8 dan Windows 8.1. Tung
gu..... lalu bagaimanakah untuk menghentikan wireless adhoc ini?. Mudah ulangi l
angkah terakhir namun kata start di ganti dengan kata stop. Semoga Bermanfaat :)
We have found many users complaining about the ad hoc networks not being shown i
n the wireless network list in Windows 8.1.

As a work around, I would suggest you to use the Wireless hosted network and che
ck if that helps you connect both the computers.

- In the Search Charms, type command prompt, right click on command prompt and s
elect Run as Administrator.
- Type the following commands and press enter.

netsh wlan show drivers

note: Check the "Hosted network supported" string. If it is yes, then your wirel
ess network adapter supports hosted network feature. If not, then you will not b
e able to use it.


If the string is yes, then follow these steps and check.

To setup a hosted network,

netsh wlan set hostednetwork mode=allow ssid=DESIRED_NETWORK_NAME key=YOUR_PASSWORD

To Start the Hosted network,

netsh.exe wlan start hostednetworkname

When you are finished with it, you can stop the connection using this command:
netsh.exe wlan stop hostednetworkname

You can get detailed information about the network you started with this command
:
netsh wlan show hostednetworkname


You may even download third party to connect two computers wirelessly.
Disclaimer: Using Third Party Software, including hardware drivers can cause ser
ious problems that may prevent your computer from booting properly. Microsoft ca
nnot guarantee that any problems resulting from the use of Third Party Software
can be solved. Using Third Party Software is at your own risk.

Hope this information is helpful. If you have any concerns, let us know.
Most Helpful Reply
Hai_Nguyen_123 replied on
Because the wireless network picker in Windows 8.1 doesn't show ad-hoc networks,
connecting must be done by hand.
To see all networks in range, including ad-hoc, run this command in command shel
l (cmd.exe):
> netsh wlan show networks
SETUP
This must be done once per network.
go to "Network and Sharing Center"
click "Set up a new connection or network"
double click "Manually connect to a wireless network"
enter the SSID of the ad-hoc network (as shown by "netsh wlan show networks"
) into the "Network name" field
configure security settings accordingly
uncheck "Start this connection automatically" (important)
click "Next", then "Close"
Run this command (important):
> netsh wlan set profileparameter <ssid> connectiontype=ibss
Replace <ssid> with the SSID of your network.
CONNECT
After setting up, run this command whenever you want to connect:
> netsh wlan connect <ssid>
Replace <ssid> with the SSID of your network.
Hovering over WiFi icon in system tray will show the name of the network that yo
u are currently connected to, even if it's an ad-hoc network (the network picker
will not show it if it's ad-hoc). The name is also visible in "Network and Shar
ing Center" window.
DISCONNECT
To disconnect from the ad-hoc network: connect to a different network, turn off
wifi, or run this command:
> netsh wlan disconnect
CLEANUP
To remove the network profile from Windows, run this command:
> netsh wlan delete profile <ssid>
Replace <ssid> with the SSID of your network.
All Replies (48)
Kevin D Souza
Found this helpful 2
Answer
Kevin D Souza replied on
Hi Mikkel,


We have found many users complaining about the ad hoc networks not being shown i
n the wireless network list in Windows 8.1.

As a work around, I would suggest you to use the Wireless hosted network and che
ck if that helps you connect both the computers.

- In the Search Charms, type command prompt, right click on command prompt and s
elect Run as Administrator.
- Type the following commands and press enter.

netsh wlan show drivers

note: Check the "Hosted network supported" string. If it is yes, then your wirel
ess network adapter supports hosted network feature. If not, then you will not b
e able to use it.


If the string is yes, then follow these steps and check.

To setup a hosted network,

netsh wlan set hostednetwork mode=allow ssid=DESIRED_NETWORK_NAME key=YOUR_PASSWORD

To Start the Hosted network,

netsh.exe wlan start hostednetworkname

When you are finished with it, you can stop the connection using this command:
netsh.exe wlan stop hostednetworkname

You can get detailed information about the network you started with this command
:
netsh wlan show hostednetworkname


You may even download third party to connect two computers wirelessly.
Disclaimer: Using Third Party Software, including hardware drivers can cause ser
ious problems that may prevent your computer from booting properly. Microsoft ca
nnot guarantee that any problems resulting from the use of Third Party Software
can be solved. Using Third Party Software is at your own risk.

Hope this information is helpful. If you have any concerns, let us know.
xhp 242g1
aoisora grisaia
kindaichi didutgg.net baccano 17 dst
check nruto 220
shakugan shana
www.kuyhaa-android19.com
ova akb48 Prof Fansub
cleavage hri hari honey yaiba 27 cek ping pong yokai 10
nufamco jacco
129-130 134-138 153-154 157-169 200-201 266

Você também pode gostar