The document describes the configuration wizard that runs after terminating autoinstall on a network device. It prompts the user to configure various network settings like the system name, administrative username and password, management interface IP address, default gateway, VLAN, wireless settings, and time settings. After confirming the configuration is correct, the system saves the settings and resets with the new configuration.
The document describes the configuration wizard that runs after terminating autoinstall on a network device. It prompts the user to configure various network settings like the system name, administrative username and password, management interface IP address, default gateway, VLAN, wireless settings, and time settings. After confirming the configuration is correct, the system saves the settings and resets with the new configuration.
The document describes the configuration wizard that runs after terminating autoinstall on a network device. It prompts the user to configure various network settings like the system name, administrative username and password, management interface IP address, default gateway, VLAN, wireless settings, and time settings. After confirming the configuration is correct, the system saves the settings and resets with the new configuration.
Would you like to terminate autoinstall? [yes]: no
*** autoinstall must be terminated in order to run the configuration wizard.
Would you like to terminate autoinstall? [yes]:
System Name [Cisco_31:ad:84] (31 characters max): AUTO-INSTALL: process terminated -- no configuration loaded
Enter Administrative User Name (24 characters max): admin Enter Administrative Password (3 to 24 characters): ***** Default values (admin or Cisco or its variants) in password is not allowed. Enter Administrative Password (3 to 24 characters): ********* Re-enter Administrative Password : *********
Enable Link Aggregation (LAG) [yes][NO]: no
Management Interface IP Address: 192.168.10.10/24 Invalid response
Management Interface IP Address: 192.168.10.10 255.255.255.0 Invalid response
Management Interface Default Router: 192.168.10.11 Management Interface VLAN Identifier (0 = untagged): 0 Management Interface Port Num [1 to 4]: 1 Management Interface DHCP Server IP Address: 192.168.10.11
Virtual Gateway IP Address: 1.1.1.1
Multicast IP Address: 239.0.0.10
Mobility/RF Group Name: grupo1
Network Name (SSID): redes1
Configure DHCP Bridging Mode [yes][NO]: no
Allow Static IP Addresses [YES][no]:
Configure a RADIUS Server now? [YES][no]: Enter the RADIUS Server's Address: 192.168.20.1 Enter the RADIUS Server's Port [1812]: Enter the RADIUS Server's Secret: Invalid response
Enter the RADIUS Server's Secret: cisco
Enter Country Code list (enter 'help' for a list of countries) [US]: