Escolar Documentos
Profissional Documentos
Cultura Documentos
A BRIEF INTRODUCTION
ON
POLYMEDICUERE PRIVATE LIMITED
Submitted in the partial fulfillment of the degree of
BACHELOR OF BUSINESS ADMINISTRATION
(INDUSTRY INTEGRATED)
Affiliated to Maharshi Dayanand University Rohtak,
Session: 2010-2012
SUBMITTED TO: SUBMITTED BY:
The controller of ANIL
The examination BBA (II), 4
th
semester
NIAM Institute of Applied Management
FARIDABAD
STUDENTS DECLARATION
I hereby declare that the Project Report conducted on
POLYMEDICURE PRIVATE LIMITED
Under the guidance of
Ms. RUCHIKA
Submitted in Partial fulfillment of the requirements for the Degree
of
BACHELOR OF BUSINESS ADMINISTRATION
(Industry Integrated)
TO
MAHARISHI DAYANAND UNIVERSITY, ROHTAK
Place: Faridabad ANIL
CERTIFICATE
This is to certify that the Project Report on
POLYMEDICURE PRIVATE LIMITED
Submitted in partial fulfillment of the requirements for the award of the degree of
BACHELOR OF BUSINESS ADMINISTRATION
(Industry Integrated)
TO
MAHARISHI DAYANAND UNIVERSITY, ROHTAK
Is a record of bonefide training carried out by
ANIL
Under my supervision and guidance and that no part of this report has been submitted
for the award of any other degree/diploma/fellowship or similar titles or prizes.
FACULTY GUIDE
Signature:
Name: Ms. RUCHIKA
Signature & seal of the Learning Center
ACKNOWLEDGEMENT
It is indeed a pleasure doing a project on POLYMEDICURE PRIVATE LIMITED. I am
grateful too, for providing me this opportunity.
I owe my indebtedness to My Project Guide Ms. RUCHIKA, for her keen interest,
encouragement and constructive support and under whose able guidance I have
completed out my project. She not only helped me in my project but also gave me an
overall exposure to other issues related to this project and answered all my queries
calmly and patiently.
The realization of this project marks the beginning of an ever - growing and
valuable learning experience in my life. Throughout the period of this project every day
was a new turning point in my career. It would be worthwhile here to mention the
contributions made by people around me, which lead to the successful completion of
this project. I express my gratitude for all that I have learnt so far and continue learning
with each passing day.
I take the pleasure to express thanks to all my colleagues for many useful
discussions and cooperation during the course of the project work.
CHAPTER 1
INTRODUCTION OF COMPANY
At POLYMED, our pursuit of excellence is a reflection of our commitment to matters
closest to our hearts - such as care, concern and love for humanity.
While our technologies are truly state - of - the - art, our business model is state - of -
the - heart.
Innovations, quality standards, products...
Everything flows forth from our passion to touch life in a meaningful way.
CHAPTER 2
ABOUT THE COMPANY
Polymed - Leading the future
POLYMED was conceived and established by a group of engineers and technocrats
dedicated to the idea of providing the benefits of modern healthcare to the mankind at
affordable price. This unique philosophy has been the driving force behind the company
since its inception in 1995. Today it has grown into one of the most dynamically
versatile manufacturers of Medical devices globally with over 75 different products.
Our vision:-
We dream of a world in which highest quality of healthcare is made available to all.
Our mission:-
To Excel in designing & delivering of healthcare products and services with user -
friendliness and safety features using latest
technology to earn trust and confidence of all stakeholders.
Modern Production Facilities & Processes
POLYMED manufactures its products using state of the art technology in ultra modern
facilities covering over 300,000 square feet of manufacturing floor space with about
50,000 square feet of clean rooms of class 100,000 to class 1,000. A tool room with
modern facilities & CNC machines supports the manufacturing processes. A high
degree of automation and an effective process control helps in delivering consistent
product quality.
Highly Trained & Experienced Personnel
POLYMED's core strength is its fully committed, well trained and technically competent
personnel. A highly qualified, experienced and motivated management provides
guidance and support to the team of over 1800 people employed in different activities.
Innovation & continuous improvement
To keep pace with the ever changing requirements of the market, POLYMED has a fully
staffed and highly equipped R & D section approved by Ministry of Science &
Technology, Government of India, to design and develop new and innovative products.
Using the latest CAD/CAM technology, the new product development is fast and
improvements, based on market response and customer feedback, are made with ease.
Assuring world class products at affordable prices is the hall mark of POLYMED.
CHAPTER 3
QUALITY SYSTEM OF COMPANY
QualityAssurance:-
POLYMED's Quality System encompasses a comprehensive and exhaustive series of
physical, chemical, biological & microbiological tests and inspection at different stages
in the manufacturing cycle, begining with constant surveillance of raw materials and its
suppliers; intensive in-process control of all manufactured components & sub-
assemblies to the final inspection & testing of the finished products. POLYMED has
successfully implemented a well documented QMS (Quality Management System)
which has been accredited by SGS Systems and Services Certifications, United
Kingdom with ISO 9001:2008, ISO-13485:2003 and CE mark from DNV, Norway thus
making the entire product range compliant with International Quality Standards.
POLYMEDs some speciality products are also US FDA 510k approved.
CHAPTER 4
PRODUCT RANGE OF COMPANY
Safety IV Cannulae
Safety I.V. Cannulae for continuous peripheral intravenous infusion
1101
PolySafety
Safety IV Cannula with snap fit cap and suturable wings
Sizes : 14G to17G*
Sizes : 18G to 26G
1102
Polypen Safety
Safety IV Cannula without port, without wings
Sizes : 14G to 17G*
Sizes : 18G to 26G
1103
Polywin Safety
Safety I.V. Cannula without port, without wings
Sizes : 14G to 17G*
Sizes : 18G to 26G
1104
Polycan Safety
Safety I.V. Cannula with wings, without port
Sizes : 14G to 17G*
Sizes : 18G to 26G
Common Features:-
User friendly, self-activating Safety mechanism
Safety needle guard automatically covers the
needle's sharp bevel after with drawl of needle from the hub, minimizing the risk
of needle stick injuries
Easy identification of needle guard after covering needle tip due to color coding
Smooth edged safety needle guard
Cannulation technique similar to conventional I.V. Cannulation.
Special tapered & kink resistant radiopaque catheter for easy insertion with
optimal flow rates
Manufactured from tested bio-compatible materials offering longer indwelling
time
Injection port with Self Locking Cap for easy opening and closing (For code :
1101)
Rounded Grip on needle hub for better support
Options available :
FEP/PUMEX catheter
Orange* 1.7 2.1 45 305
Grey* 1.3 1.7 45 200
White* 1.1 1.5 45 142
Green 0.9 1.3 45/32 95
Pink 0.8 1.1 32 65
Blue 0.6 0.9 25 36
Yellow 0.5 0.7 19 23
Violet 0.45 0.62 19 17
* New design
Instructions to use:-
I.V. Cannula with port & wings
1.
Remove the needle cover
2.
Grip the Cannula from the inj. Port & needle hub projection
3.
Insert cannula into vein at a low angle
4.
Withdraw tje needle gently
5.
Safety tip clip covered needle tip
6
Dispose of the needle in sharps container
I.V. Cannula without port & wings
1.
Remove the cannula cap
2.
Hold the bevel phase of the cannuala upwords
3.
Withdraw the needle gently
Novocent
Central Venous Catheter
11010
Single Lumen
11020
Double Lumen
11030
Triple Lumen
Common Features:-
Central Venous Catheter made of specially formulated and biocompatible
Polyurethane material provides strength during insertion and also softens at
body temperature to conform to the body tissues and reduces the risk and
vascular trauma
Specially designed soft & beveled tip for smooth & easy insertion of catheter
Soft Flexible J-Tip Guide wire prevents the vessel perforation and also provides
good torque to ensure firm insertion
Sufficiently radio-opaque material of catheter with clear, definite marking
facilitates correct placement of catheter tip
Sterile ready for use
Individually tray packed
Compete Set of CVC kit consist of :-
Indwelling catheter
Y-Introducer needle with check valve
J-Tip guide wire
Vessel dilator
Luer lock syringe
Scalpel
Catheter holder
Catheter holder clamp
Injection cap
Extension line clamp
Guiding Syringe/ LOR Syringe (Optional)
LOR Syringe Y Introducer Needle J Tip Guidewire
Oxygen Catheter
2006
Features:-
Suitable for direct administration of oxygen through the naso pharynx.
Funnel connector at proximal end
Open distal end with multiple lateral eyes
Open distal end with multiple lateral eyes
Colour coded funnel end for easy size identification
Tube length: 40 cm
Sizes: 6 FG to 16 FG
Color Code:-
Light Green
Blue
Black
White
Green
Orange
Urine Collection Bags
3015
Polyuro- Premium
Urine Collection Bag with NRV
Features for 3015:-
For short and long term urine collection bags.
Capacity : 2000 ml
Available with specially molded.
.
3002
Polyuro
Urine Collection Bag with Top Outlet
Features for 3002:-
For short and long term urine collection bags.
Capacity : 2000 ml
Available with specially molded.
3003
Urine Collection Bag with Bottom Outlet
Features for 3003:-
For short and long term urine collection bags.
Reinforced hole for hanging
Capacity : 2000 ml
Common Features for 3015, 3002, and 3003:-
Soft and kink resistant PVC tubing
With non-return valve
Conical inlet connector with cap
Tube length : 90 & 100 cm
Available sterile or non sterile
3008
Urine Collection Bag with Top Outlet &
Rod for Hanging
Features for 3008:-
For short and long term urine collection bags.
Rod at the top for hanging the urine collection bags.
Capacity : 2000 ml
3009
Leg Bag Set
Features for 3009:-
For short and long term urine collection bags.
Provide freedom of mobility and the leg of the patient.
Available with leg straps.
Capacity : 800 ml.
3010
Urine Collection Bag with T-type Bottom Outlet and Sampling port
Features for 3010:-
For short and long term urine collection bags.
For clean single hand operation the bag.
Capacity : 2000 ml
3005
Paediatric UrineCollection Bag
Features for 3005:-
For short term urine collection
Suitable for both male and female infants
Capacity : 100 ml
Provided with special adhesive for better grip and easy removal from soft skin of
the infants
Common Features for 3008, 3009, 3010 & 3005:-
Soft and kink resistant PVC tubing
With non-return valve
Bag graduated in ml to indicate the quantity of urine collected
Conical inlet connector with cap
Tube length : 90 & 100 cm
Available sterile or non sterile
Ryle's / Nasogastric Tube
4001
Ryle's Tube
Nasogastric feeding Tube
Features:-
For nasogastric introduction of nutrition and aspiration of intestinal secretion
Closed distal end coned with radio-opaque material for accurate placement
Four lateral eyes
Tube with radio-opaque line, marked at 50,60 and 70 cm from the tip for accurate
placement
Soft, frosted and kink resistant PVC tubing
Color coded funnel end connector for easy identification of size
Available with or without luer connector
Length : 105 cm
Available with or without luer connector
Blood Administration Sets
7007
Transvol Set
Options available :-
Also available in Double Drip Chamber
With or without needle
Luer lock or luer slip
Single or double filter chamber
"Y" injection port (latex or latex free)
Moulded latex flush bulb injection membrane for intermittent medication
Plastic pack or blister pack
Code type:-
7015 With double drip chamber, with airvent
7016 With double drip chamber, without airvent
Surgery & wound drainage
Redon Drain
Features:-
Provided with radio-opaque line and smooth eyes
Cross perforated length of tube: 14 cm
Markings on the tube at 19 cm from the distal tip
Soft, frosted & kink resistant PVC tubing
Length: 50, 70, 120 & 170 cm
Length: 50, 70, 120 & 170 cm
Sizes: 8, 10, 12, 14, 16 & 18 FG
Dialysis
A.V. Fistula Needles
9003
Fistula Needle with fixed wing
9023
Fistula Needle with rotating wing
Common Features for 9003 & 9023:-
To connect blood lines of the blood vessels through needles when dialysis is
carried out through an internal fistula
Back eye needle to minimize interruption of blood flow
Siliconised ultra thin walled & sharp beveled needle to minimize trauma to the
patient
Soft, frosted and kink resistant PVC tubing
Flexible butterfly wing for proper fixation
Color coded wing for easy identification of sizes
Tube length : 30 cm
Sizes : 15 G, 16 G & 17 G
Also available in Twin pack
OTHERS
Safety Syringe
12001
Features for 12001:-
Retractable syringe with self locking mechanism to prevent needle stick
injuries
Prevents reuse after activation of locking mechanism and cannot be deactivated
and remains protective through out disposal
Single hand use allowing the workers hand to remain behind the needle
1. To use, press the plunger with the thumb until a click is heard / felt. Verify
luer lock needle is firmly engaged and then remove needle cover prior to
releasing thumb pressure.
2. Aspirate, fill and inject as usual
3. If syringe is emptied, continue pressing plunger with thumb until a click is
heard / felt. Even if partial drug remains in syringe press QUICK TAB
towards needle with thumb until the click is heard / felt. In either case
allow syringe and needle to fully retract by releasing thumb pressure.
Retraction speed is controlled by end user
Allows for simple needle interchange
Sizes : 3 ml.
Needle sizes : 18G to 25G.
CHAPTER 5
RESEARCH AND METHODOLOGY
RESEARCH AND METHODOLOGY
According to Green and Toll:-
A research design is the specification of methods and procedures for acquiring the
information needed. It is the overall operation pattern or framework of the project that
stipulates which information is to be collected from which source by what procedures
The research process includes the following steps:
Defining the problem.
Statement of research objectives.
Planning the research design.
Planning the sample.
Collection of data.
Analyzing the data.
Formulation of conclusion.
Preparation of the report.
TYPES OF RESEARCH
Exploratory Research
Descriptive Research
Types of Research
Exploratory Research Descriptive Research
Exploratory Research
It is done to generate new ideas; respondents should be given sufficient freedom to
express themselves. It is generally based on secondary data that are readily available.
Therefore unable to frame detailed research questions.
Descriptive research
It is undertaken when researcher is interested in knowledge the characteristics of
certain groups such as age; sex; educational level; occupation or income; interested in
knowledge the proportion of it in a given population who have behaved in a particular
manner; making the projections of a certain things; or determining the relationship
between two or more variables, descriptive study may be necessary.
DATA COLLECTION METHOD
Data collection methods can be classified into two methods:
Primary methods
Secondary methods
DATA COLLECTION METHOD
Primary Methods Secondary Methods
PRIMARY METHODS
Data directly collected by a researcher is known as Primary Data.
The methods used for collecting primary data may be:
Survey.
Observation.
Sources of primary data
Interview methods
Depth interviews
Mail interviews
Telephone interviews
Delphi technique.
Projective technique
Focus group interviews
Questionnaire
Structured
Unstructured
Semi-unstructured
SECONDARY METHODS
Data not originally collected for use in the research project under consideration, but
rather for use by some other person or for some other project are termed
Secondary Data
It can be classified into two categories:
Internal Sources
External Sources
Sources of secondary data
Internal Sources External Sources
Sales records
Credit records
Internal records
Published Commercial
Directories Demographic-
Periodicals -data
Financial records Store audit
Statistical records Diary panel
Advertising Explosive
Primary data
For the purpose of collecting primary data, the researcher has adopted the method of
survey. Survey can be telephonic, by mail. For the purpose of collected detailed
information. Researcher has chosen surveys based on personal integrity by means of a
questionnaire.
Secondary data
It has been collected from various books and internet. Researcher has adopted this
method of collection. As the researcher liters no access to magazines and journal but a
plenty of material was available on the internet.
RESEARCH DESIGN
It is a type of blueprint prepared developing on various types of blueprints available for
the collection, measurement & analysis of data. The design of a research study is based
on the purpose of the study.
Types of research design
Qualitative Research Design.
Quantitative Research Design.
Research design: - Descriptive
The project involved the study of Clients perception towards real estate sector with
respect to certain parameters like:
Product
Promotion
Process
Physical evidence.
CHAPTER 6
SUMMARY AND CONCLUSIONS
SUMMARY AND CONCLUSIONS
Overall training experience can be summarized with the learning gained in both
behavioral and working aspect.
In the corporate, following things were learnt:
Relationship building
Team work
Adapt changes relating to work environment
Updates and knowhow of the latest laws enforced by Government
The art of putting academic knowledge in to actual work environment, taking initiatives
and completing the task on time with 100% accuracy was also learnt. At the end, I
would like to conclude that giving proper response to feedback is very important for
future improvement in performance.
CHAPTER 7
BIBLIOGRAPHY
BIBLIOGRAPHY
www.Wikipedia.org
www.goggle.com
www.yahoo.com
www.answer.com
www.niamindia.org
www.polymedicure.com
Through the magazine
Prospectus
SNO
TABLE OF CONTENTS
1. Introduction Of company
2. About the company
3. Quality system of company
4. Product range of company
Safety for cannulae
Novocent
Oxygen Cather
Urine collection bags
Ryles nesogastric tube
Blood administration test
Surgery and wound drainage
Dialysis
Others
5. Research Methodology
Meaning of Research
Research Methodology
Research Design
6.
Summary and conclusions
7. Bibliography