Escolar Documentos
Profissional Documentos
Cultura Documentos
7 Matt finish Outer side & Mirror finish inside. Included
M.O.C. of Rollers / Wheels on which dust
8 collector mounted Castor
No. of Rollers / Wheels provided in each dust
9 collector 4
Polyster Antistatic Cartridge
10 Pre filter type Filter
11 Pre filter efficiency 99% to 3micron
12 Magnehelic Gauge across Prefilter Included
13 Final Filter type EU ‐9
14 Final Filter Efficiency 50% down to 0.3 Micron
15 Final filter Housing M.O.C. MS epoxy
16 Inspection glass for final filter Provided
17 Magnehelic Gauge across Final filter Provided
18 Compressed Air pressure required 6 Kg/cm2
19 Pulse valve & controller with FLP Enclosure
20 Price of Each Dust collector ( Rs) 160,000
21 Total Cost of Dust collector 320,000
22 M.O.C of Hood S.S. ‐ 304
23 S.S. Hood sheet thickness 2mm
24 Size of S.S. Hood 750mm x 750mm
25 Cost of each S.S. Hood 12,500
26 Qty of S.S. Hood ( No. ) 2
27 Total Cost of S.S. Hood 25,000
S.S. Hood shall be with the arrangement of
side movement that it is will be fixed at one
point and can be rotate to both the side.
28 Given arrangement Cost of 2 no. Hood ( Rs.) 14,000
M.O.C. of S.S. Pendent ( From Dust collector
29 to blower) S.S. 304
30 Thickness of S.S. pipe Schedule ‐ 10
31 Size of S.S. Pipe 125dia
32 Length of S.S. pipe ( Mtr.) 5
33 Qty of S.S. pipe ( No.) 2
34 Cost of S.S. Pipe Per Mtr. 3,750
35 Total Cost of S.S. Pipe 37,500
36 Cost of per TC clamp for pipe of Suitable size. 2,000
37 Total Qty of TC clamp 4
38 Total Cost of TC Clamp 16,000
M.O.C. of Flexible Pipe
39 PVC Foodgrade, Non toxic type
Size of Flexible Pipe
40 125 dia
Cost of Flexible pipe per Mtr.
41 200
Length of Flexible Pipe ( Mtr)
42 10
Qty of Flexible Pipe ( No.)
43 2
Total Cost of Flexible pipe
44 4,000
45
Area of Installation Inside the Production area
46
Equipment Fabrication As per cGMP requirement
Unloading & Erection at the place
47 Client Scope
Supervision During erection
48 Vender scope
All the S.S. Triclovers & bends require to
connect the S.S. pendent from Dust collector
49 to Blower . Included
to the other end of the dust collector.
Flexible pipe will connect from this nozzle of
50 dust collector to S.S. Hood. Included
S.S. Nozzles with triclover which will connect
to the to S.S. Hood on which flexible pipe will
51 connect. Included
BLOWER DETAILS
52 Fan Spark proof Centrifugal fan
53 Fan M.O.C MS casing+Al impeller
54 Static Pressure 300mmwc
55 Drive Impeller on Motor shaft
56 Blower make pilani
57 Motor FLP type
58 Motor Make Crompton / ABB
59 Motor Capacity 2hp
Sound Level (Db) at the mezzennine ‐ at 1
60 Mtr distance 80‐85db
61 Electrical Panel board In FLP enclosure
62 Unloading & Erection at the place Client Scope
Supervision During erection Dust collector supplier scope
63
64 Dust Collector Drawing
65 Price of Blower ( Rs) 25,000
66 Qty. of Blower 2
67 Total Cost of Blower 50,000
68 Equipment Fabrication As per cGMP requirement
G.I. Pipe after the Final Filter (EU‐9). Under the client scope but Pipe
size will be given by Dust
69 collector Vender.
Total Cost ( Basic cost) of Dust collector with
70 all above mentioned item. 466,500
CST @ 2 % against 'C' form & VAT 12.5 % (
71 with in Karnataka) 58,313
72 Excise Duty @ 8.24 % Nil (Against CT‐3 form)
Transportation , Freight & Insurance of the 5,000
Dust collector, Blower, S.S. Hood, S.S.
Pendent and Flexible pipe with all
73 acessories.
Packing & Forwarding of the Dust collector,
Blower, S.S. Hood, S.S. Pendent and Flexible
74 pipe with all acessories. 9,330
Installation & commissioning (Independent of
75 Man days) 6,000
76 Service Tax@ 10.3% 618
Total cost of Dust Collector (Including all
77 above mentioned Items) 545,761
8‐10 weeks from P.O.
78 Delivery Period confirmation
Shall be finalized at the time of
79 Payment terms & conditions Purchase Order finalization
The vender should arrange for factory
acceptance test (FAT) before dispatch/ after
manufacturing of Dust Collector. After
manufacturing of the equipment, vender will
first send his FAT report to the JUBL and
inform that the equipment is ready for FAT.
Cost of FAT should be included in quoted
rate. If delay occurs in the FAT then vender
will arrange for accommodation of the JUBL
engineer on his cost.
Vender has to provide FAT format for
80 approval within ten days of P.O. Included
DUST COLLECTOR TECHNICAL SHEET ‐ 300 CFM
7 Matt finish Outer side & Mirror finish inside. Included
M.O.C. of Rollers / Wheels on which dust
8 collector mounted castor
No. of Rollers / Wheels provided in each dust
9 collector 4
Polyster Antistatic Cartridge
10 Pre filter type Filter
11 Pre filter efficiency 99% 3 mciron
12 Magnehelic Gauge across Prefilter Included
13 Final Filter type EU ‐9
14 Final Filter Efficiency 50% down to 0.3 Micron
15 Final filter Housing M.O.C. MS epoxy
16 Inspection glass for final filter Provided
17 Magnehelic Gauge across Final filter Provided
18 Compressed Air pressure required 6 Kg/cm2
19 Pulse valve & controller with FLP Enclosure
20 Price of Each Dust collector ( Rs) 140,000
21 Total Cost of Dust collector 280,000
22 M.O.C of Hood S.S. ‐ 304
23 S.S. Hood sheet thickness 2mm
24 Size of S.S. Hood 400mm x 400mm
25 Cost of each S.S. Hood 4,000
26 Qty of S.S. Hood ( No. ) 2
27 Total Cost of S.S. Hood 8,000
S.S. Hood shall be with the arrangement of
side movement that it is will be fixed at one
point and can be rotate to both the side.
28 Given arrangement Cost of 2 no. Hood ( Rs.) 14,000
M.O.C. of S.S. Pendent ( From Dust collector
29 to blower) S.S. 304
30 Thickness of S.S. pipe Schedule ‐ 10
31 Size of S.S. Pipe 100mmdia
32 Length of S.S. pipe ( Mtr.) 5
33 Qty of S.S. pipe ( No.) 2
34 Cost of S.S. Pipe Per Mtr. 4,000
35 Total Cost of S.S. Pipe 40,000
36 Cost of per TC clamp for pipe of Suitable size. 1,000
37 Total Qty of TC clamp 4
38 Total Cost of TC Clamp 8,000
39 M.O.C. of Flexible Pipe PVC Foodgrade, Non toxic type
40 Size of Flexible Pipe 100
41 Cost of Flexible pipe per Mtr. 200
42 Length of Flexible Pipe ( Mtr) 10
43 Qty of Flexible Pipe ( No.) 2
44 Total Cost of Flexible pipe 4,000
45 Area of Installation Inside the Production area
46 Equipment Fabrication As per cGMP requirement
47 Unloading & Erection at the place Client Scope
48 Supervision During erection Vender scope
All the S.S. Triclovers & bends require to
connect the S.S. pendent from Dust collector
49 to Blower . Included
S.S. Nozzles with triclover which will connect
to the other end of the dust collector.
Flexible pipe will connect from this nozzle of
50 dust collector to S.S. Hood. Included
S.S. Nozzles with triclover which will connect
to the to S.S. Hood on which flexible pipe will
51 connect. Included
BLOWER DETAILS
52 Fan Spark proof Centrifugal fan
53 Fan M.O.C MS casing + Al impeller
54 Static Pressure 300 mmwc
55 Drive Impeller on Motor shaft
56 Blower make Pilani
57 Motor FLP type
58 Motor Make Crompton / ABB
59 Motor Capacity 1hp
Sound Level (Db) at the mezzennine ‐ at 1
60 Mtr distance 75‐80 dB
61 Electrical Panel board In FLP enclosure
62 Unloading & Erection at the place Client Scope
63 Supervision During erection Dust collector supplier scope
64 Dust Collector Drawing
65 Price of Blower ( Rs) 22,500
66 Qty. of Blower 2
67 Total Cost of Blower 45,000
68 Equipment Fabrication As per cGMP requirement
G.I. Pipe after the Final Filter (EU‐9). Under the client scope but Pipe
size will be given by Dust
69 collector Vender.
Total Cost ( Basic cost) of Dust collector with
70 all above mentioned item. 399,000
CST @ 2 % against 'C' form & VAT 12.5 % (
71 with in Karnataka) 49,875
72 Excise Duty @ 8.24 % Nil (Against CT‐3 form)
Transportation , Freight & Insurance of the
Dust collector, Blower, S.S. Hood, S.S.
Pendent and Flexible pipe with all
73 acessories. 5,000
Packing & Forwarding of the Dust collector,
Blower, S.S. Hood, S.S. Pendent and Flexible
74 pipe with all acessories. 7,980
Installation & commissioning of Dust
collector, S.S. Hood, S.S. Pendent , Flexible
75 hose( Independent of Man days) 6,000
76 Service tax @10.3 % 618
Total cost of Dust Collector (Including all
77 above mentioned Items) 468,473
8‐10 weeks from P.O.
78 Delivery Period confirmation
Shall be finalized at the time of
79 Payment terms & conditions Purchase Order finalization
The vender should arrange for factory
acceptance test (FAT) before dispatch/ after
manufacturing of Dust Collector. After
manufacturing of the equipment, vender will
first send his FAT report to the JUBL and
inform that the equipment is ready for FAT.
Cost of FAT should be included in quoted
rate. If delay occurs in the FAT then vender
will arrange for accommodation of the JUBL
engineer on his cost.
Vender has to provide FAT format for
approval within ten days of P.O.
80 Included
DUST COLLECTOR TECHNICAL SHEET ‐ 200 CFM
7 Matt finish Outer side & Mirror finish inside. Included
M.O.C. of Rollers / Wheels on which dust
8 collector mounted castor
No. of Rollers / Wheels provided in each dust
9 collector 4
Polyster Antistatic Cartridge
10 Pre filter type Filter
11 Pre filter efficiency 99% down to 3micron
12 Magnehelic Gauge across Prefilter Included
13 Final Filter type EU ‐9
14 Final Filter Efficiency 50% down to 0.3 Micron
15 Final filter Housing M.O.C. MS epoxy
16 Inspection glass for final filter Provided
17 Magnehelic Gauge across Final filter Provided
18 Compressed Air pressure required 6 Kg/cm2
19 Pulse valve & controller with FLP Enclosure
20 Price of Each Dust collector ( Rs) 140,000
21 Total Cost of Dust collector 560,000
22 M.O.C of Hood S.S. ‐ 304
23 S.S. Hood sheet thickness 2mm
24 Size of S.S. Hood 500mm x 500mm
25 Cost of each S.S. Hood 4,000
26 Qty of S.S. Hood ( No. ) 4
27 Total Cost of S.S. Hood 16,000
14,000
S.S. Hood shall be with the arrangement of
side movement that it is will be fixed at one
point and can be rotate to both the side.
28 Given arrangement Cost of 2 no. Hood ( Rs.)
M.O.C. of S.S. Pendent ( From Dust collector
29 to blower) S.S. 304
30 Thickness of S.S. pipe Schedule ‐ 10
31 Size of S.S. Pipe 100mm
32 Length of S.S. pipe ( Mtr.) 5
33 Qty of S.S. pipe ( No.) 4
34 Cost of S.S. Pipe Per Mtr. 4,000
35 Total Cost of S.S. Pipe 80,000
2,000
36 Cost of per TC clamp for pipe of Suitable size.
37 Total Qty of TC clamp 4
38 Total Cost of TC Clamp 32,000
39 M.O.C. of Flexible Pipe PVC Foodgrade, Non toxic type
40 Size of Flexible Pipe 100
41 Cost of Flexible pipe per Mtr. 200
42 Length of Flexible Pipe ( Mtr) 10
43 Qty of Flexible Pipe ( No.) 4
44 Total Cost of Flexible pipe 8,000
45 Area of Installation Inide the Production area
46 Equipment Fabrication As per cGMP requirement
47 Unloading & Erection at the place Client Scope
48 Supervision During erection Vender scope
All the S.S. Triclovers & bends require to
connect the S.S. pendent from Dust collector
49 to Blower . Included
S.S. Nozzles with triclover which will connect
to the other end of the dust collector.
Flexible pipe will connect from this nozzle of
50 dust collector to S.S. Hood. Included
S.S. Nozzles with triclover which will connect
to the to S.S. Hood on which flexible pipe will
51 connect. Included
BLOWER DETAILS
52 Fan Spark proof Centrifugal fan
53 Fan M.O.C MS casing+Al impeller
54 Static Pressure 300mmwc
55 Drive Impeller on Motor shaft
56 Blower make pilani
57 Motor FLP type
58 Motor Make Crompton / ABB
59 Motor Capacity 1hp
Sound Level (Db) at the mezzennine ‐ at 1
60 Mtr distance 85 dB
61 Electrical Panel board In FLP enclosure
62 Unloading & Erection at the place Client Scope
63 Supervision During erection Dust collector supplier scope
64 Dust Collector Drawing
65 Price of Blower ( Rs) 22,500
66 Qty. of Blower 4
67 Total Cost of Blower 90,000
68 Equipment Fabrication As per cGMP requirement
G.I. Pipe after the Final Filter (EU‐9). Under the client scope but Pipe
size will be given by Dust
69 collector Vender.
Total Cost ( Basic cost) of Dust collector with
70 all above mentioned item. 800,000
CST @ 2 % against 'C' form & VAT 12.5 % (
71 with in Karnataka) 100,000
72 Excise Duty @ 8.24 % Nil (Against CT‐3 form)
Transportation , Freight & Insurance of the
Dust collector, Blower, S.S. Hood, S.S.
Pendent and Flexible pipe with all
73 acessories. 10,000
Packing & Forwarding of the Dust collector,
Blower, S.S. Hood, S.S. Pendent and Flexible
74 pipe with all acessories. 16,000
12,000
Installation & commissioning of Dust
collector, S.S. Hood, S.S. Pendent , Flexible
75 hose( Independent of Man days)
76 Service tax @ 10.3% 1,236
Total cost of Dust Collector (Including all
77 above mentioned Items) 939,236
8‐10 weeks from P.O.
78 Delivery Period confirmation
Shall be finalized at the time of
79 Payment terms & conditions Purchase Order finalization
The vender should arrange for factory
acceptance test (FAT) before dispatch/ after
manufacturing of Dust Collector. After
manufacturing of the equipment, vender will
first send his FAT report to the JUBL and
inform that the equipment is ready for FAT.
Cost of FAT should be included in quoted
rate. If delay occurs in the FAT then vender
will arrange for accommodation of the JUBL
engineer on his cost.
Vender has to provide FAT format for
approval within ten days of P.O.
80 Included
DUST COLLECTOR TECHNICAL SHEET ‐ 200 CFM (W/O HOOD)
7 Matt finish Outer side & Mirror finish inside. Included
M.O.C. of Rollers / Wheels on which dust
8 collector mounted castor
No. of Rollers / Wheels provided in each dust
9 collector 4
Polyster Antistatic Cartridge
10 Pre filter type Filter
11 Pre filter efficiency 99% down to 3micron
12 Magnehelic Gauge across Prefilter Included
13 Final Filter type EU ‐9
14 Final Filter Efficiency 50% down to 0.3 Micron
15 Final filter Housing M.O.C. MS
16 Inspection glass for final filter Provided
17 Magnehelic Gauge across Final filter Provided
18 Compressed Air pressure required 6 Kg/cm2
19 Pulse valve & controller with FLP Enclosure
20 Price of Each Dust collector ( Rs) 140,000
21 Total Cost of Dust collector 280,000
M.O.C. of S.S. Pendent ( From Dust collector
22 to blower) S.S. 304
23 Thickness of S.S. pipe Schedule ‐ 10
24 Size of S.S. Pipe 100mmdia
25 Length of S.S. pipe ( Mtr.) 5
26 Qty of S.S. pipe ( No.) 2
27 Cost of S.S. Pipe Per Mtr. 4,000
28 Total Cost of S.S. Pipe 40,000
1,000
29 Cost of per TC clamp for pipe of Suitable size.
30 Total Qty of TC clamp 4
31 Total Cost of TC Clamp 8,000
32 M.O.C. of Flexible Pipe PVC Foodgrade, Non toxic type
33 Size of Flexible Pipe 100 mm
34 Cost of Flexible pipe per Mtr. 200
35 Length of Flexible Pipe ( Mtr) 10
36 Qty of Flexible Pipe ( No.) 2
37 Total Cost of Flexible pipe 4,000
38 Area of Installation Inide the Production area
39 Equipment Fabrication As per cGMP requirement
40 Unloading & Erection at the place Client Scope
41 Supervision During erection Vender scope
All the S.S. Triclovers & bends require to
connect the S.S. pendent from Dust collector
42 to Blower . Included
S.S. Nozzles with triclover which will connect
to the other end of the dust collector.
Flexible pipe will connect from this nozzle of
43 dust collector to S.S. Hood. Included
S.S. Nozzles with triclover which will connect
to the to S.S. Hood on which flexible pipe will
44 connect. Included
BLOWER DETAILS
46 Fan Spark proof Centrifugal fan
47 Fan M.O.C MS casing+ Al impeller
48 Static Pressure 300mmwc
49 Drive Impeller on Motor shaft
50 Blower make pilani
51 Motor FLP type
52 Motor Make Crompton / ABB
53 Motor Capacity 1hp
Sound Level (Db) at the mezzennine ‐ at 1
54 Mtr distance 75‐80db
55 Electrical Panel board In FLP enclosure
56 Unloading & Erection at the place Client Scope
57 Supervision During erection Dust collector supplier scope
58 Dust Collector Drawing
59 Price of Blower ( Rs) 22,500
60 Qty. of Blower 2
61 Total Cost of Blower 45,000
62 Equipment Fabrication As per cGMP requirement
G.I. Pipe after the Final Filter (EU‐9). Under the client scope but Pipe
size will be given by Dust
63 collector Vender.
Total Cost ( Basic cost) of Dust collector with
64 all above mentioned item. 377,000
CST @ 2 % against 'C' form & VAT 12.5 % (
65 with in Karnataka) 47,125
66 Excise Duty @ 8.24 % Nil (Against CT‐3 form)
Transportation , Freight & Insurance of the
Dust collector, Blower, S.S. Hood, S.S.
Pendent and Flexible pipe with all
67 acessories. 5,000
Packing & Forwarding of the Dust collector,
Blower, S.S. Hood, S.S. Pendent and Flexible
68 pipe with all acessories. 7,540
6,000
Installation & commissioning of Dust
collector, S.S. Hood, S.S. Pendent , Flexible
69 hose( Independent of Man days)
70 Service Tax @ 10.3% 618
Total cost of Dust Collector (Including all
71 above mentioned Items) 443,283
8‐10 weeks from P.O.
70 Delivery Period confirmation
Shall be finalized at the time of
71 Payment terms & conditions Purchase Order finalization
The vender should arrange for factory
acceptance test (FAT) before dispatch/ after
manufacturing of Dust Collector. After
manufacturing of the equipment, vender will
first send his FAT report to the JUBL and
inform that the equipment is ready for FAT.
Cost of FAT should be included in quoted
rate. If delay occurs in the FAT then vender
will arrange for accommodation of the JUBL
engineer on his cost.
Vender has to provide FAT format for
approval within ten days of P.O.
72 Included