Você está na página 1de 3

6

Overview
As data service in the communication network develops, the transmission equipment
should be capable of carrying multiple kinds of service (TDM/IP). Rapid growth of
data services represented by IP leads to enormous demands for network bandwidth,
and there are high requirements for transmission equipment broadband-providing
capability, multiservice carrying capability and equipment reliability in the
construction of network infrastructure, so the network carriers should select suitable
equipment to establish transmission network and satisfy future demands.
ZXMP S200 is an SDH-based compact multi-service node equipment, fully compliant
with current ITU-T SDH series recommendations. With a transverse insertion
structure design, it is small in size, with chassis dimensions of 442 mm (width) 45.0
mm (height) 240 mm (depth). It features high level of integration, plentiful and
flexible interfaces, all front-facing operations; supports multiple installation modes
and power supply working modes; facilitates operation and maintenance.
ZXMP S200 implements flexible networking, offers good network adaptability and perfect network protection capability. It can be widely
deployed in metro access layer, edge layer, 2G/3G base station, building area, FTTH, private network, CPE service access, commercial VIP
private line access and PDH substitution.
Major characteristics
High level of integration and small size
ZXMP S200 employs a system board +plug-in board structure,
featuring high level of integration. In typical configuration, it is
only 1U in height and 5.5kg in weight, and its power
consumption is smaller than 30W. The system board is an
integrated multi-service system, comprising service unit,
network management unit, cross-connect unit, clock unit, power
supply unit and auxiliary management interface. It implements
all SDH NE basic functions on a single board. ZXMP S200
supports one extension slot, enabling on-demand extension and
upgrade via adding plug-in boards.
Multiple installation and power supply modes
With small size, the system can be installed in ETSI standard
cabinet and IEC 19-inch cabinet, supporting desktop-mounting,
wall-mounting and outdoor-mounting.
Supports 220/110V AC, -48/-60V DC or +24V DC power supply
modes. DC power supply adopts dual-input port to implement
1:1 protection.
Plentiful service interfaces and flexible
configuration
Supported service types: SDH interface, PDH interface, Data
interface, Auxiliary interface.
Employs SFP module, supports online upgrade of network
equipment from 155M to 622M. Provides 6464 VC-4 high-order
cross-connect capability and 20372037 VC-12 lower-order

ZXMP S200
Compact STM-1/STM-4 Multi-service Transport Platform


cross-connect capability. It can be used as standard TM
equipment, ADM equipment and REG equipment.
Perfect network protection mechanism
2-fiber bidirectional multiplex section protection ring
4-fiber bidirectional/unidirectional link multiplex section 1+1
or 1:1 protection
2-fiber path protection ring
Subnet connection protection
Dual-node interconnection protection mode
Good network adaptability
The equipment can use DCC channel to transfer network
management information. Additionally, it can use the twelve
time slots in E1 as ECC channel, thus implements transparent
transmission of network management information in other SDH
equipments and offers a network management networking
solution in case of hybrid networking of multi-vendor
equipments.
DCCr, DCCm, DCCr+m are optional for ECC, capable of
transparent transmission and tandem connection.
Flexible maintenance methods
All front-facing operations enable convenient maintenance
All optical interfaces adopt SFP modules whose types can be
selected according to customers service requirements
Supports online optical power detection and ALS function of
all optical interfaces
Offers diversified maintenance interfaces: NM Qx interface,
LCT terminal interface, RS232 interface, 2Mbps or 2MHz BITS
interface, environmental supervisory interface, alarm output
interface
Technical Specification
Technical Specification ZXMP S200
Size (HWD) 45mm 442mm 240 mm
Weight 5.5 kg
Number of service slots 1
Switching capacity 6464VC-4, 20372037 VC-12
Service Interface
STM-4, STM-1
E1, T1
FE(e/o)
N64K RS232/RS485/RS422, 2/4-line VF interface
Maintenance and operation Front cabling, front installation and front maintenance
Major service features
EOS
Support the VC-12-Xv/VC-3-Xv/VC-4-Xv, LCAS, and GFP
Support LST
OAM
Support order wire phone, RS-232/422 interface
Cross-scheduling of the overhead
Supports the TCM of high-order paths (HP-TCM)
Synchronization
provides two external 2.048Mbit/s or 2.048MHz clock input references
supports synchronization priority switching and SSM -based automatic switching
supports the "S1 byte algorithm patent technology" developed by ZTE
Power supply (DC/AC) 220/110V AC, -48/-60V DC, 24V DC
Power Consumption <30 Watts
MTBF/MTTR >20000h / <2 h
Noise <55 dB
Operating Environment Requirement -5 C ~+50 C, 5%~95%, Non-condensing
Altitude <4000 m
Aseismatic Degree 9 level
Electromagnetic compatibility
The electromagnetic interference meets the CISPR22 A standard. The anti-interference performance meets
the IEC1000-4 series standard.
Certificate of Certification CE, CB, RoHS




2011 ZTE CORPORATION. All rights reserved.
For more information about ZTE office, please visit website http://wwwen.zte.com.cn/en/about/global_sales_offices/
ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used without the prior written permission of ZTE. Due to
update and improvement of ZTE products and technologies, information of the document is subjected to change without notice.

Você também pode gostar