1. Contingency measures during workplace accidents, fire and other emergencies are recognized. 2. Personal protective equipments are correctly used in accordance with organization OHS procedures and practices. 3. Hazard/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment. 4. Always discharge yourself before touching any part of the computer. 5. Be careful with tools that may cause short circuit. 6. Wear rubber sole shoes when standing on the ground or in a concrete floor. 7. Always power off and unplug the computer before working on it. 8. When making circuit changes switch off and unplug the power cord from the equipment then discharge the capacitors. 9. Replace only fuses with those proper rating. 10. Hold the components by the edges and do not touch the ICs. 11. Read and follow instructions on the manual carefully. 12. Do not use excessive force if things dont quite slip into place
PC Disassembly OHS 1. Switch off and unplug the computer from the power source. 2. Disconnect all the external connector peripherals 3. Open the case 4. Unplug all the internal connectors from the motherboard. 5. Unscrew the power supply. 6. Unscrew all the drives (HDD, CDROM and Floppy drives) 7. Remove all expansion cards if there are any. 8. Unscrew the motherboard
PC Assembly Proper assembling procedure: 1. Prepare the computer case (Install power supply, I/O shield and spacers) 2. Install drives (DVD, Floppy and HDD) 3. Install the CPU, fan, heat sink and memory module on the motherboard 4. Install the motherboard into the casing and expansion cards 5. Install the cablings (Power connectors, FDD Connector, IDE/SATA Connector, USB headers and system panel header). 6. Attach the monitor, keyboard, mouse and plug into a power source. 7. Troubleshoot if necessary 8. Assemble and install network connection CHS NC-II Core competencies 1. Install computer system and network 2. Diagnose and troubleshoot computer system 3. Configure computer system and network 4. Maintain computer system and network Networking OHS 1. Work area should have proper ventilation lights. 2. Proper use of tools and equipments. 3. Apply 5S 4. Do not use loose clothes. 5. Proper use of Personal Protective Equipment (PPE). 6. Read and follow the manual carefully.
5S Sort Clearly distinguish needed items from unneeded and eliminate the latter. Straighten Keep needed items in the correct place to allow for easy and immediate retrieval Shine Keep the workplace neat and clean Standardize The method by which sort, straighten, shine are made habitual. Sustain Maintain established procedures
Mastering IoT For Industrial Environments: Unlock the IoT Landscape for Industrial Environments with Industry 4.0, Covering Architecture, Protocols like MQTT, and Advancements with ESP-IDF