Escolar Documentos
Profissional Documentos
Cultura Documentos
and OMV
Orbital Motors
Technical
Information
Table of Revisions
Date
Nov 2009
Nov 2010
Jul 2012
Nov 2012
Jan 2013
Apr 2013
Jun 2013
Dec 2013
Page
67
68
57
3
20
16
54
6
Changed
conversions, and layout adjusted
Dimensions changed
Typo in Major dia
Planetary Gears deleted
Correct drawing
Drawing corrected
Drawing corrected
Tabel updated
Rev
ED
EF
EG
EH
EI
EJ
EK
EL
Sauer-Danfoss is a world leader within production of low speed orbital motors with
high torque. We can offer more than 1600 different orbital motors, categorised in types,
variants and sizes (incl. different shaft versions).
The motors vary in size (rated displacement) from 8 cm3 [0.50 in3] to 800 cm3 [48.9 in3]
per revolution.
Speeds range up to approx. 2500 min-1 (rpm) for the smallest type and up to approx
600 min-1 (rpm) for the largest type.
Maximum operating torques vary from 13 Nm [115 lbfin] to 2700 Nm [24.000 lbfin]
(peak) and maximum outputs are from 2.0 kW [2.7 hp] to 70 kW [95 hp].
Characteristic features:
Smooth running over the entire speed range
Constant operating torque over a wide speed range
High starting torque
High return pressure without the use of drain line (High pressure shaft seal)
High efficiency
Long life under extreme operating conditions
Robust and compact design
High radial and axial bearing capacity
For applications in both open and closed loop hydraulic systems
Suitable for a wide variety of hydraulics fluids
2013 Sauer-Danfoss. All rights reserved.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer -Danfoss reserves the right to alter its products without prior notice. This also applies to products
already ordered provided that such alterations can be made without affecting agreed specifications. All
trademarks in this material are properties of their respective owners. Sauer-Danfoss, the Sauer-Danfoss
logotype, the Sauer-Danfoss S-icon, PLUS+1, What really matters is inside and Know-How in Motion are
trademarks of the Sauer-Danfoss Group.
Frontpage: F300 211, F300 212, F300 351, F300 145, 151-1976
The SauerDanfoss orbital motors are used in the following application areas:
Construction equipment
Agricultural equipment
Material handling & Lifting equipment
Forestry equipment
Lawn and turf equipment
Special purpose
Machine tools and stationary equipment
Marine equipment
Detailed data on all Sauer-Danfoss motors can be found in our motor catalogue, which is
divided into 5 individual subcatalogues:
General information on Sauer-Danfoss orbital motors: function, use, selection of
orbital motor, hydraulic systems, etc.
Technical data on small motors: OML and OMM
Technical data on medium sized motors: OMP, OMR, OMH and OMEW
Technical data on medium sized motors: DH and DS
Technical data on large motors: OMS, OMT and OMV
Technical data on large motors: TMT
A general survey brochure on Sauer-Danfoss orbital motors gives a quick motor
reference based on power, torque, speed and capabilities.
Max. speed
min-1
(rpm)
800
600
400
200
80
100
125
160
200
250
315
500
160
200
250
315
400
500
315
400
500
630
800
200
250
315
400
500
315
400
500
630
800
200
250
315
400
500
315
400
500
630
800
Max. Torque
lbfin Nm
22000
2400
20000
400
2200
18000
2000
16000
1800
14000
1600
1400
12000
1200
10000
1000
8000
800
6000
600
4000
400
2000
200
80
hp
80
60
40
20
100
125
160
200
250
315
500
160
Max. output
kW
60
50
40
30
20
10
80
100
125
160
200
250
315
OMS
400
Intermittend values
400
500
160
OMT
Continuous values
OMV
151-1407.11
The bar diagrams above are useful for a quick selection of relevant motor size for the
application. The final motor size can be determined by using the function diagram for
each motor size.
OMS can be found on pages 14-18
OMT can be found on pages 42-44
OMV can be found on pages 65-67
The function diagrams are based on actual tests on a representative number of motors
from our production. The diagrams apply to a return pressure between 5 and 10 bar
[75 and 150 psi] when using mineral based hydraulic oil with a viscosity of 35 mm2/s
[165 SUS] and a temperature of 50C [120F]. For further explanation concerning how to
read and use the function diagrams, please consult the paragraph "Selection of motor
size" in the technical information "General Orbital motors" 520L0232.
OMS
Technical Information
Versions
Special flange
A-2
flange
Magneto
flange
SAE B flange
Wheel
Short
Splined 1.25 in
G 1/2
US version
l
l
l
7/8-14 UNF
7/8-14 UNF
Check valve
G 1/2
Cyl. 1.25 in
European version
Port size
Cyl. 32 mm
Drain connection
Standard
flange
Shaft
Mounting flange
OMS
Versions
Yes
Yes
OMS
Yes
Yes
OMS
Yes
Yes
OMS
Yes
Yes
OMS
Yes
Yes
OMS
Yes
Yes
OMS
Tapered 35 mm
G 1/2
Tapered 1.25 in
7/8-14 UNF
P.t.o.
G 1/2
Yes
Yes
OMS
Splined 1.25 in
G 1/2
Yes
Yes
OMS
Cyl. 1 in
7/8-14 UNF
Yes
Yes
OMS
Cyl. 1.25 in
7/8-14 UNF
Yes
Yes
OMS
Splined 1 in
7/8-14 UNF
Yes
Yes
OMS
Splined 1.25 in
7/8-14 UNF
Yes
Yes
OMS
Tapered 1.25 in
7/8-14 UNF
Yes
Yes
OMS
Cyl. 1 in
7/8-14 UNF
Yes
Yes
OMS
Cyl. 1.25 in
7/8-14 UNF
Yes
Yes
OMS
Splined 1 in
7/8-14 UNF
Yes
Yes
OMS
Splined 1.25 in
7/8-14 UNF
Yes
Yes
Splined 1.25 in
7/8-14 UNF
Yes
Yes
Splined 0.875 in
7/8-14 UNF
Yes
Yes
OMS
Cyl. 32 mm
Cyl. 1.25 in
G 1/2
7/8-14 UNF
l
l
Yes
Yes
Yes
Yes
OMSW
OMSW
Tapered 35 mm
G 1/2
Yes
Yes
OMSW
Tapered 1.25 in
7/8-14 UNF
Yes
Yes
OMSW
No output shaft
G 1/2
Yes
Yes
OMSS
l
l
l
l
OMS
OMS
OMS
Technical Information
Code Numbers
Code Numbers
Dimensions Page
11
23
11
24
11
23
11
24
11
23
11
24
11
23
12
25
2345
12
26
2323
2347
11
26
2314
2315
2346
12
26
2329
2330
2331
2348
11
26
2336
2337
2338
2339
2349
11
26
2380
2381
2382
2383
2384
2385
12
27
2370
2371
2372
2373
2374
2375
2376
11
27
2360
2361
2362
2363
2364
2365
2366
2367
12
27
2350
2351
2352
2353
2354
2355
2356
2357
2358
11
27
151F
2395
2396
2397
2398
2399
2400
2401
2402
2403
11
28
151F
2413
2414
2415
2416
2417
13
28
151F
0521
0522
0523
0524
0525
0526
0527
0610
11
29
151F
2235
2236
2237
2238
2239
2240
2241
2265
2266
11
30
151F
0528
0529
0530
0531
0532
0533
0534
0609
11
29
151F
2242
2243
2244
2245
2246
2247
2248
2263
2267
11
30
151F
0535
0536
0537
0538
0539
0540
0541
0608
31
14
14
15
15
16
16
17
17
18
Code Numbers
Displacement [cm3]
151F
80
0500
100
0501
125
0502
160
0503
200
0504
250
0505
315
0506
400
0605
500
-
151F
2200
2201
2202
2203
2204
2205
2206
2261
2268
151F
0507
0508
0509
0510
0511
0512
0513
151F
2207
2208
2209
2210
2211
2212
2213
151F
0514
0515
0516
0517
0518
0519
0520
151F
2214
2215
2216
2217
2218
2219
2220
151F
0560
0561
0562
0563
0564
0565
0566
151F
0542
0543
0544
0545
0546
0547
0548
151F
2300
2301
2302
2303
2304
2305
2306
2307
151F
2316
2317
2318
2319
2320
2321
2322
151F
2308
2309
2310
2311
2312
2313
151F
2324
2325
2326
2327
2328
151F
2332
2333
2334
2335
151F
2377
2378
2379
151F
2368
2369
151F
2359
151F
2262
2269
2264
2270
Ordering
Add the four digit prefix 151F to the four digit numbers from the chart for complete
code number.
Example:
151F0504 for an OMS 200 with standard flange, cyl. 32 mm shaft and port size G 1/2.
Note: Orders will not be accepted without the four digit prefix.
OMS
Technical Information
Technical Data
Technical data for OMS
Type
Motor size
Geometric displacement
cm3
[in3]
Max. speed
min-1
[rpm]
Max. torque
Nm
[lbfin]
Max. output
cont.
int1)
cont.
int.1)
cont.
kW
[hp]
int.1)
cont.
bar
[psi]
int.1)
peak2)
l/min
[USgal/min]
cont.
int.1)
bar
[psi]
at max. press. drop cont.
Nm [lbfin]
at max. press. drop int.1)
Nm [lbfin]
OMS
OMSW
OMSS
80
80.5
[4.91]
810
1000
240
[2120]
310
[2740]
15.5
[20.8]
19.5
[26.2]
210
[3050]
275
[3990]
295
[4280]
65
[17.2]
80
[21.1]
12
[175]
180
[1590]
235
[2080]
OMS
OMSW
OMSS
100
100.0
[6.10]
750
900
305
[2700]
390
[3450]
18.0
[24.1]
22.5
[30.2]
210
[3050]
275
[3990]
295
[4280]
75
[19.8]
90
[23.8]
10
[145]
230
[2040]
300
[2660]
OMS
OMSW
OMSS
125
125.7
[7.67]
600
720
375
[3320]
490
[4340]
18.0
[24.1]
22.5
[30.2]
210
[3050]
275
[3990]
295
[4280]
75
[19.8]
90
[23.8]
10
[145]
290
[2570]
380
[3360]
OMS
OMSW
OMSS
160
159.7
[9.75]
470
560
490
[4340]
600
[5310]
16.5
[22.1]
23.0
[30.8]
210
[3050]
260
[3770]
280
[4060]
75
[19.8]
90
[23.8]
8
[115]
370
[3270]
460
[4070]
Type
OMS
OMSW
OMSS
1)
2)
OMS
OMSW
OMSS
200
200.0
[12.20]
375
450
610
[5400]
720
[6370]
16.5
[22.1]
22.0
[29.5]
210
[3050]
250
[3630]
270
[3920]
75
[19.8]
90
[23.8]
8
[115]
470
[4160]
560
[4960]
OMS
OMSW
OMSS
250
250.0
[15.26]
300
360
720
[6370]
870
[7700]
14.5
[19.4]
18.0
[24.1]
200
[2900]
250
[3630]
270
[3920]
75
[19.8]
90
[23.8]
8
[115]
560
[4960]
700
[6200]
Nm
[lbfin]
cont.
int.1)
peak2)
cont.
int.1)
Splined 1 in
360 [3190]
450 [3980]
Cyl. 1 in
300 [2660]
410 [3630]
Splined 0.875 in
200 [1770]
200 [1770]
For max. permissible combination of flow and pressure, see function diagram for actual motor.
OMS
OMSW
OMSS
500
488.0
[29.78]
155
185
850
[7520]
990
[8760]
9.0
[12.1]
10.5
[14.1]
120
[1740]
140
[2030]
160
[2320]
75
[19.8]
90
[23.8]
8
[115]
660
[5840]
770
[6820]
230
[3340]
295
[4280]
300
[4350]
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: the permissible values may occur for max. 1% of every minute.
OMS
OMSW
OMSS
400
393.0
[23.98]
190
230
865
[7660]
990
[8760]
11.0
[14.8]
12.5
[16.8]
160
[2320]
190
[2760]
210
[3050]
75
[19.8]
90
[23.8]
8
[115]
710
[6280]
840
[7430]
OMS
OMSW
OMSS
315
314.9
[19.22]
240
285
825
[7300]
1000
[8850]
15.0
[20.1]
17.0
[22.8]
200
[2900]
240
[3480]
260
[3770]
75
[19.8]
90
[23.8]
8
[115]
710
[6280]
850
[7520]
OMS
Technical Information
Technical Data
Max. Permissible Shaft
Seal Pressure
Max. return pressure without drain line or max. pressure in the drain line
P
psi
1500
bar
100
90
1200
80
70
900
60
50
600
40
30
300
20
10
0
0
100
200
300
400
500
600
700
800
min-1
(rpm)
max.
151-1674.10
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Continuous operation
p
psi
bar
16
200
14
12
150
10
8
100
50
6
4
2
0
0
0
10
2
20
4
30
6
40
10
50
12
60
14
16
70
18
80
20
90
22
l/min
US gal/min
151-1408.10
The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]
OMS
Technical Information
Technical Data
Oil Flow in Drain Line
Pressure drop
Viscosity
bar
[psi]
mm2/s
[SUS]
20 [100]
35 [165]
20 [100]
35 [165]
140 [2030]
210 [3050]
Direction of Shaft
Rotation
10
Oil flow in
drain line
l/min
[US gal/min]
1.5 [0.40]
1.0 [0.26]
3.0 [0.79]
2.0[0.53]
OMS
Technical Information
Technical Data
Permissible Shaft Loads
for OMS
Mounting flange:
Standard A-2 Magneto SAE B
Shaft:
Cyl. 32 mm Cyl. 1.25 in Splined 1.25 in.
Tapered 35 mm Tapered 1.25 in P.t.o.
Prad. Prad.
lbf
7000
6000
N
30000
0
- +
Pmax. =5000 N
25000
=1124 lbf
5000
20000
4000
15000
3000
2000
1000
10000
5000
0
-20
-10
-0.5
10
20
30
0.5
40
50
1.5
60
70
2.5
80 mm
in
151-1962.10
Mounting flange:
Wheel
Shaft:
All shaft types
Prad. Prad.
lbf
7000
6000
N
30000
0
- +
25000
Pmax. =5000 N
=1124 lbf
5000
20000
4000
15000
3000
2000
1000
0
10000
5000
0
10
0.5
20
30
40
1.5
50
60
70
2.5
80
90
3.5
100
110 mm
in
151-1964.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
520L0407 Rev EL Dec 2013
11
OMS
Technical Information
Technical Data
Permissible Shaft Loads
for OMS
Mounting flange:
Special
Shaft:
Splined 1.25 in
Prad. Prad.
lbf
7000
6000
30000
0
- +
Pmax. =5000 N
=1124 lbf
25000
5000
20000
4000
15000
3000
2000
1000
10000
5000
0
-20
-10
-0.5
10
20
0.5
30
40
50
1.5
60
70
2.5
80 mm
in
151-1960.10
Mounting flange:
A-2 Magneto
Shaft:
Cyl. 1 in Splined 1 in
Prad. Prad.
lbf
N
20000
0
- +
4000
Pmax. =5000 N
=1124 lbf
15000
3000
2000
1000
10000
5000
0
-20
-10
-0.5
10
20
0.5
30
40
1.5
50
60 mm
in
151-1961.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
12
OMS
Technical Information
Technical Data
Permissible Shaft Loads
for OMS
Mounting flange:
SAE B
Shaft:
Splined 0.875 in
Prad. Prad.
lbf
N
20000
0
- +
4000
Pmax. =5000 N
=1124 lbf
15000
3000
2000
1000
10000
5000
0
-20
-10
-0.5
10
20
0.5
30
40
1.5
50
60 mm
in
151-1963.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
13
OMS
Technical Information
Function Diagrams
Function Diagrams
Q=80 l/min
[21.1 US gal/min]
65 l/min
[17.2 US gal/min]
50 l/min
[13.2 US gal/min]
40 l/min
[10.6 US gal/min]
30 l/min
[7.9 US gal/min]
325
20 l/min
[5.3 US gal/min]
3000
Nm
10 l/min
[2.6 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
OMS 80
p=275 bar
300
2500
275
250
2000
225
9kW
12kW
200
1500
175
6hp
150
1000
6kW
100
t =81%
3hp
1hp
50
175 bar
2540 psi
140 bar
2030 psi
12hp
3kW
125
225 bar
3260 psi
210 bar
3050 psi
15kW
18hp
15hp
9hp
105 bar
1520 psi
80%
75
500
3990 psi
250 bar
3630 psi
N=18kW
78%
N=1kW
70 bar
1020 psi
75%
70%
t =60%
25
p= 30 bar
440 psi
100
200
300
400
500
600
700
800
900
min-1
(rpm)
1000
151-901.10
350
2500
p=275 bar
3990 psi
15kW
300
9kW
250
6kW
200
3kW
1500
150
50
18hp
12hp
15hp
t =83%
6hp
3hp
100
500
250 bar
3630 psi
225 bar
3260 psi
210 bar
3050 psi
175 bar
2540 psi
N=18kW
12kW
2000
1000
Q=90 l/min
[23.8 US gal/min]
3000
75 l/min
[19.8 US gal/min]
400
60 l/min
[15.9 US gal/min]
3500
50 l/min
[13.2 US gal/min]
450
40 l/min
[10.6 US gal/min]
4000
30 l/min
[7.9 US gal/min]
Nm
20 l/min
[5.3 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]
OMS 100
140 bar
2030 psi
105 bar
1520 psi
80%
N=1kW
1hp
70 bar
1020 psi
75%
70%
p= 35 bar
t =60%
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
510 psi
750
800
850
900
950
min-1
(rpm)
151-902.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Max. permissible continuous/intermittent torque for the actual shaft version can be
found on page 8.
Intermittent pressure drop and oil flow must not occur simultaneously.
14
OMS
Technical Information
Function Diagrams
Function Diagrams
3000
2500
1500
1000
15hp
12hp
6kW
6hp
21hp
15kW
12kW
9kW
300
250 bar
3630 psi
225 bar
3260 psi
210 bar
3050 psi
18kW
18hp
175 bar
2540 psi
t =85%
9hp
200
140 bar
2030 psi
83%
3kW
3hp
150
1hp
105 bar
1520 psi
80%
100
50
Q=90 l/min
[23.8 US gal/min]
75 l/min
[19.8 US gal/min]
3990 psi
350
500
p=275 bar
N=21kW
250
2000
60 l/min
[15.9 US gal/min]
3500
400
50 l/min
[13.2 US gal/min]
450
40 l/min
[10.6 US gal/min]
500
4000
30 l/min
[7.9 US gal/min]
4500
20 l/min
[5.3 US gal/min]
Nm
10 l/min
[2.6 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
OMS 125
70 bar
1020 psi
75%
70%
N=1kW
p= 35 bar
t =60%
0
50
100
150
200
250
300
350
400
450
500
510 psi
550
600
650
700
min-1
(rpm)
750
151-903.10
550
18hp
18kW
Q=90 l/min
[23.8 US gal/min]
75 l/min
[19.8 US gal/min]
60 l/min
[15.9 US gal/min]
50 l/min
[13.2 US gal/min]
40 l/min
[10.6 US gal/min]
600
5000
30 l/min
[7.9 US gal/min]
6000
20 l/min
[5.3 US gal/min]
Nm
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]
OMS 160
lbfin
p=260 bar
3770 psi
N=21kW
225 bar
3260 psi
210 bar
3050 psi
500
4000
450
6hp
12kW
9kW
6kW
400
3000
350
15kW
15hp
9hp
175 bar
2540 psi
160 bar
2320 psi
140 bar
2030 psi
21hp
12hp
300
2000
250
3hp
200
150
1000
3kW
86%
N=1kW
100
105 bar
1520 psi
t =87%
83%
85%
80%
1hp
75%
50
0
70%
70 bar
1020 psi
t =60%
p= 35 bar
510 psi
0
0
50
100
150
200
250
300
350
400
450
500
550
600
min-1
(rpm)
151-904.11
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Max. permissible continuous/intermittent torque for the actual shaft version can be
found on page 8.
Intermittent pressure drop and oil flow must not occur simultaneously.
15
6000
5000
650
15hp
600
550
6kW
9kW
12hp
1000
15kW
12kW
18kW
21hp
6hp
9hp
350
t =88%
300
2000
3630 psi
225 bar
3260 psi
210 bar
3050 psi
175 bar
2540 psi
160 bar
2320 psi
140 bar
2030 psi
N=21kW
18hp
450
400
3000
Q=90 l/min
[23.8 US gal/min]
p=250 bar
700
500
4000
75 l/min
[19.8 US gal/min]
750
60 l/min
[15.9 US gal/min]
7000
50 l/min
[13.2 US gal/min]
Nm
40 l/min
[10.6 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]
OMS 200
30 l/min
[7.9 US gal/min]
Function Diagrams
20 l/min
[5.3 US gal/min]
OMS
Technical Information
Function Diagrams
250
86%
3kW
200
3hp
N=1kW
150
105 bar
1520 psi
85%
83%
80%
1hp
100
75%
50
0
70%
70 bar
1020 psi
t =60%
p= 30 bar
440 psi
0
0
50
100
150
200
250
300
350
400
450
min-1
(rpm)
500
151-905.10
5000
700
600
9hp
3hp
300
200
1000
100
Q=90 l/min
[23.8 US gal/min]
225 bar
3260 psi
N=21kW
200 bar
2900 psi
175 bar
2540 psi
155 bar
2250 psi
140 bar
2030 psi
125 bar
1810 psi
95 bar
1390 psi
70 bar
1020 psi
21hp
18hp
12hp
6hp
400
2000
15hp
6kW
4000
18kW
12kW
9kW
500
3000
p=250 bar
3630 psi
15kW
6000
75 l/min
[19.8 US gal/min]
60 l/min
[15.9 US gal/min]
800
50 l/min
[13.2 US gal/min]
7000
40 l/min
[10.6 US gal/min]
900
30 l/min
[7.9 US gal/min]
8000
20 l/min
[5.3 US gal/min]
Nm
10 l/min
[2.6 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
OMS 250
N=1kW
1hp
3kW
86%
85%
83%
80%
75%
t =87%
70%
p= 35 bar
t =60%
0
50
100
150
200
250
510 psi
300
350
400
min-1
(rpm)
151-1039.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Max. permissible continuous/intermittent torque for the actual shaft version can be
found on page 8.
Intermittent pressure drop and oil flow must not occur simultaneously.
16
OMS
Technical Information
Function Diagrams
Function Diagrams
9000
900
7000
800
6000
700
4000
3000
2000
Q=90 l/min
[23.8 US gal/min]
75 l/min
[19.8 US gal/min]
60 l/min
[15.9 US gal/min]
50 l/min
[13.2 US gal/min]
p=240 bar
3480 psi
1000
8000
5000
40 l/min
[10.6 US gal/min]
1100
30 l/min
[7.9 US gal/min]
10000
Nm
20 l/min
[5.3 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]
OMS 315
N=18kW
15kW
9kW
600
6kW
400
t =87%
80%
85%
75%
3hp
N=1kW
1hp
200
18hp
15hp
9hp
6hp
3kW
300
100
12kW
12hp
500
1000
225 bar
3260 psi
200 bar
2900 psi
175 bar
2540 psi
160 bar
2320 psi
140 bar
2030 psi
120 bar
1740 psi
100 bar
1450 psi
83%
70 bar
1020 psi
70%
p= 35 bar
t =60%
0
25
50
75
100
125
150
175
200
225
250
510 psi
275
min-1
(rpm)
300
151-906.10
9000
900
7000
800
6000
700
4000
3000
2000
9kW
6kW
9hp
3kW
3hp
300
25
75
80 bar
1160 psi
85%
86%
50
105 bar
1520 psi
t =87%
83%
80%
75%
t =60%
0
120 bar
1740 psi
15hp
12hp
6hp
N=
1kW
1hp
200
140 bar
2030 psi
12kW
400
2760 psi
175 bar
2540 psi
160 bar
2320 psi
500
100
p=190 bar
N=15kW
600
1000
Q=90 l/min
[23.8 US gal/min]
75 l/min
[19.8 US gal/min]
60 l/min
[15.9 US gal/min]
50 l/min
[13.2 US gal/min]
40 l/min
[10.6 US gal/min]
1000
8000
5000
30 l/min
[7.9 US gal/min]
1100
20 l/min
[5.3 US gal/min]
10000
Nm
10 l/min
[2.6 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
OMS 400
100
125
60 bar
870 psi
p= 30 bar
70%
440 psi
150
175
200
225
250
min-1
(rpm)
151-1491.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Max. permissible continuous/intermittent torque for the actual shaft version can be
found on page 8.
Intermittent pressure drop and oil flow must not occur simultaneously.
17
OMS
Technical Information
Function Diagrams
Function Diagrams
9000
8000
6000
700
3000
2000
6hp
600
3kW
500
Q=90 l/min
[23.8 US gal/min]
75 l/min
[19.8 US gal/min]
60 l/min
[15.9 US gal/min]
9kW
6kW
t =88%
86% 85%
105 bar
1520 psi
90 bar
1300 psi
80 bar
1160 psi
9hp
80%
1hp
200
120 bar
1740 psi
83%
3hp
300
100
2030 psi
12hp
400
1000
p=140 bar
N=12kW
900
800
4000
50 l/min
[13.2 US gal/min]
1000
7000
5000
40 l/min
[10.6 US gal/min]
1100
30 l/min
[7.9 US gal/min]
10000
Nm
20 l/min
[5.3 US gal/min]
lbfin
Q=5 l/min
[1.3 US gal/min]
10 l/min
[2.6 US gal/min]
OMS 500
N=
1kW
75%
70%
50 bar
730 psi
t =60%
p= 25 bar
360 psi
25
50
75
100
125
150
175
200
min-1
(rpm)
151-1984.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Max. permissible continuous/intermittent torque for the actual shaft version can be
found on page 8.
Intermittent pressure drop and oil flow must not occur simultaneously.
18
OMS
Technical Information
Shaft Version
Shaft Version
58 [2.28]
18 [0.71]
45
R0.6 [0.024]
A-A
6 [0.24]
35.00 [1.378]
34.71 [1.367]
M8
32.018 [1.2605]
32.002 [1.2599]
A
35 [1.38]
A: Cylindrical 32 mm shaft
D: Parallel key
A10 8 45
DIN 6885
Keyway deviates from
standard
A
45.5 [1.791]
45.0 [1.772]
10.000 [0.3937]
9.964 [0.3923]
5.5 [0.217]
4.5 [0.177]
56.5 [2.224]
48.4 [1.906]
47.6 [1.874]
min. 20 [0.78]
45
R0.4 [0.016]
A-A
35.33 [1.391]
35.08 [1.381]
31.750 [1.2500]
31.699 [1.2480]
A
35 [1.38]
A
31.75 [1.250]
31.37 [1.235]
9.4 [0.370]
7.5 [0.295]
7.962 [0.3135]
7.937 [0.3125]
43.4 [1.708]
42.6 [1.678]
R0.5 [0.020]
min. 20 [0.78]
R4 [0.16]
A-A
A
31.75 [1.250]
31.37 [1.235]
3.0 [0.118]
2.0 [0.079]
28.2 [1.110]
27.9 [1.098]
25.40 [1.000]
25.38 [0.999]
A
35 [1.38]
C: Cylindrical 1 in shaft
F: Parallel key
1/4 1/4 11/4 in
B.S. 46
Keyway deviates from
standard
F
6.40 [0.252]
6.35 [0.250]
151-876.10
19
OMS
Technical Information
Shaft Version
Shaft Version
58 [2.28]
18 [0.71]
45
A-A
6 [0.24]
R0.4 [0.016]
M8
31.750 [1.2500]
31.725 [1.2490]
D.
35 [1.38]
A
38 [1.50]
36 [1.42]
48.4 [1.906]
47.6 [1.874]
min. 20 [0.78]
45
31.750 [1.2500]
31.725 [1.2490]
A
35 [1.38]
US version
E: Involute splined shaft
ANS B92.1 - 1970 standard
Flat root side fit
Pitch 12/24
Teeth 14
Major dia. 1.25 in
Pressure angle 30
A-A
R0.4 [0.016]
A
35 [1.38]
32 [1.26]
min. 14 [0.55]
R2 [0.08]
A-A
-20 UNC-2B
*Deviates from
SAE 6 B (B.S. 2059)
35 [1.38]
F: Splined shaft
SAE 6 B (B.S. 2059)
Straight-sided,
bottom fitting, deep.
Fit 2
Nom. size 1 in
25.348 [0.9979]
25.298 [0.9960]
6x60
A
22.3 [0.878]
21.7 [0.854]
45
*6.275 [0.2470]
*6.200 [0.2441]
1[0.04]x45
*21.54 [0.848]
*21.40 [0.843]
43.4 [1.709]
42.6 [1.677]
151-1912.11
20
OMS
Technical Information
Shaft Version
18.6 [0.732]
18.4 [0.724]
Shaft Version
22.1 [0.870]
21.9 [0.862]
R4 [0.16]
19.1.[0.752]
19.0 [0.748]
4.5 [0.177]
A-A
35 [1.38]
H: Tapered 35 mm shaft
(ISO/R775)
K: DIN 937
Across flats: 41 mm
Tightening torque:
200 10 Nm [1770 85 lbfin]
J: Taper 1:10
L: Parallel key
B6 6 20
DIN 6885
Keyway deviates from
standard
R2.5 [0.098]
13.5 [0.531]
12.5 [0.492]
33.2 [1.307]
32.8 [1.291]
M20x1.5 [0.591]
44 [1.73]
35 [1.38]
G.
A-A
A
A
13 [0.51]
4 [0.16]
6.00 [0.236]
5.97 [0.235]
20 [0.79]
36 [1.42]
58 [2.28]
54.3 [2.138]
53.7 [2.114]
12.7 [0.500]
A-A
17.16 [0.676]
16.94 [0.677]
N
4 [0.15]
5 [0.20]
31.775 [1.2510]
31.725 [1.2490]
45
35 [1.38]
A
31.75 [1.250]
31.37 [1.235]
35.6 [1.402]
34.4 [1.354]
O
7.960 [0.3134]
7.940 [0.3126]
151-1915.10
21
OMS
Technical Information
Technical Data
Shaft Version
100 [3.94]
R0.5 [0.020]
A-A
34.85 [1.372]
34.73 [1.367]
60
40 [1.57]
R6.7 [0.267]
7 [0.28]
77 [3.03]
75 [2.95]
]
40
0.3 36]
4[
8.6 3 [0.3
8.5
J. P.t.o. shaft
DIN 9611 Form 1
(ISO/R500 without pin hole)
R5 [0.20]
29.5 [1.161]
29.3 [1.154]
45
28.14 [1.108]
27.89 [1.098]
38.25 [1.506]
37.75 [1.486]
151-1948.10
min. 16 [0.63]
min. 16 [0.63]
34.4 [1.354]
34.0B[1.339]
E
A
34.4 [1.354]
34.0 [1.339]
21.0 [0.827]
min. 12 [0.47]
min. 12 [0.47]
min. 12 [0.47]
min. 12 [0.47]
A: G main ports
B: UNF main ports
7
E: ISO 228/1 - G1/2 F:
/8 - 14 UNF
D
O-ring boss port
21.4 [0.843]
C
21.0 [0.827]
D
G
21.4H
[0.843]
C
151-1971.11
151-1971.11
C: G drain port
D: UNF drain port
7
G: ISO 228/1 - G1/4 H:
/16 - 20 UNF
O-ring boss port
22
OMS
Technical Information
Dimensions European Version
Dimension
Standard Flange
R1 [0.04]
6.35 [0.250]
5.85 [0.230]
13.5 [0.531]
20 [0.79]
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
48 [1.89]
C
5.6 [0.22]
4.4 [0.17]
L1
L2
66.5 [2.618]
64.5 [2.539]
18 [0.71]
L3
1 [0.04]x45
82.55 [3.250]
82.50 [3.248]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
max. 54 [2.13]
R18 [0.71]
56 [2.20]
70 [2.76]
Rmin. 14 [0.55]
Type
OMS 80
OMS 100
OMS 125
OMS 160
OMS 200
OMS 250
OMS 315
OMS 400
Lmax
mm
[in]
167
[6.57]
170
[6.69]
175
[6.89]
181
[7.13]
188
[7.40]
196
[7.72]
208
[8.19]
221
[8.70]
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
L2
mm
[in]
124
[4.88]
127
[5.00]
132
[5.20]
138
[5.43]
145
[5.71]
153
[6.02]
165
[6.50]
178
[7.01]
Output shaft
max
min
max
P.t.o. shaft
min
L3
mm
[in]
67
[2.64]
65
[2.56]
109
[4.29]
107
[4.21]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 13 mm [0.51 in] deep
E: G 12; 15 mm [0.59 in] deep
40 [1.57]
R13 [0.51]
R20 [0.78]
m
m
ax
ax
106.8 [4.205]
106.0 [4.173]
.1
.1
28
05
[5
.0
[4
4]
.1
3]
151-1809.10
23
OMS
Technical Information
Dimensions US Version
Standard Flange
21 [0.83]
R1 [0.04]
1 [0.04]x45
6.35 [0.250]
5.85 [0.230]
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
56 [2.20]
C
5.6 [0.22]
4.4 [0.17]
L1
L2
66.5 [2.618]
64.5 [2.539]
13.5 [0.531]
18 [0.71]
L3
82.55 [3.250]
82.50 [3.248]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
R18 [0.71]
max. 54 [2.13]
40 [1.57]
70 [2.76]
max. 103 [4.06]
Type
OMS 80
96
.
[4
Drain connection
7
16 - 20 UNF;
12 mm [0.47 in] deep
O-ring boss port
M10; 13 mm [0.51 in] deep
7
8 - 14 UNF;
16.7 mm [0.657 in] deep
O-ring boss port
3]
C:
D:
E:
24
min
.1
OMS 500
max
Tapered 1.25 in
106.8 [4.205]
106.0 [4.173]
[4
OMS 400
min
12
OMS 315
max
.
ax
OMS 250
Cyl.1.25 in
Splined 1.25 in
L3
mm
[in]
57
[2.24]
55
[2.17]
67
[2.64]
65
[2.56]
05
OMS 200
Output shaft
.1
OMS 160
L2
mm
[in]
124
[4.88]
127
[5.00]
132
[5.20]
138
[5.43]
145
[5.71]
153
[6.02]
165
[6.50]
178
[7.01]
178
[7.01]
OMS 125
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
68.4
[2.693]
ax
m
OMS 100
Lmax
mm
[in]
167
[6.57]
170
[6.69]
175
[6.89]
181
[7.13]
188
[7.40]
196
[7.72]
208
[8.19]
221
[8.70]
221
[8.70]
151-1972.10
OMS
Technical Information
Dimensions European Version
6.35 [0.250]
5.85 [0.230]
R1 [0.04]
48 [1.89]
L1
C
5.6 [0.22]
4.4 [0.17]
L2
20 [0.79]
78.5 [3.091]
76.5 [3.012]
18 [0.71]
58 [2.28]
55 [2.17]
53 [2.09]
1 [0.04]x45
82.55 [3.250]
82.50 [3.248]
Special Flange
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
16.3 [0.642]
15.7 [0.618]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
70 [2.76]
OMS 100
OMS 125
OMS 160
OMS 200
OMS 250
OMS 315
OMS 400
R10 [0.39]
11.5 [0.453]
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
56 [2.20]
L2
mm
[in]
136
[5.35]
140
[5.51]
144
[5.67]
150
[5.91]
157
[6.18]
166
[6.54]
177
[6.97]
190
[7.48]
OMS 80
Lmax
mm
[in]
178
[7.01]
182
[7.17]
186
[7.32]
192
[7.56]
199
[7.83]
208
[8.19]
219
[8.62]
232
[9.13]
max. 54 [2.13]
21.3 [0.839]
20.7 [0.815]
max. 103 [4.06]
Type
max. 52 [2.05]
R18 [0.71]
1 106
06 .8
.0 [4.
[4 20
.1 5]
73
]
151-1810.10
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 13 mm [0.51 in] deep
E: G 12; 15 mm [0.59 in] deep
25
OMS
Technical Information
Dimensions US Version
21 [0.83]
6.35 [0.250]
5.85 [0.230]
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
56 [2.20]
C
5.6 [0.22]
4.4 [0.17]
L1
L2
66.5 [2.618]
64.5 [2.539]
R1 [0.04]
L3
18 [0.71]
13.5 [0.531]
1 [0.04]x45
88.55 [3.250]
82.50 [3.248]
A-2 Flange
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
max. 54 [2.13]
R18 [0.71]
40 [1.57]
70 [2.76]
OMS 80
OMS 100
OMS 500
26
min
max
min
max
Tapered 1.25 in
min
C:
D:
E:
Drain connection
716 - 20 UNF;
12 mm [0.47 in] deep
O-ring boss port
M10; 13 mm [0.51 in] deep
78 - 14 UNF;
16.7 mm [0.657 in] deep
O-ring boss port
6]
OMS 400
Cyl.1.25 in
Splined 1.25 in
max
.9
OMS 315
Cyl.1 in
Splined 1 in
L3
mm
[in]
52
[2.05]
50
[1.97]
57
[2.24]
55
[2.17]
67
[2.64]
65
[2.56]
[4
OMS 250
Output shaft
26
OMS 200
L2
mm
[in]
124
[4.88]
127
[5.00]
132
[5.20]
138
[5.43]
145
[5.71]
153
[6.02]
165
[6.50]
178
[7.01]
178
[7.01]
.1
OMS 160
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
68.4
[2.693]
ax
m
OMS 125
Lmax
mm
[in]
167
[6.57]
170
[6.69]
175
[6.89]
181
[7.13]
188
[7.40]
196
[7.72]
208
[8.19]
221
[8.70]
221
[8.70]
106.8 [4.205]
106.0 [4.173]
Type
151-1979.10
OMS
Technical Information
Dimensions US Version
2.6 [0.102]
70 [2.75]
68 [2.68]
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
56 [2.20]
C
5.6 [0.22]
4.4 [0.17]
L1
L2
21 [0.83]
L3
18.9 [0.744]
13.5 [0.531]
6x20 [0.79]
0.3 [0.012]x45
88.55 [3.250]
82.50 [3.248]
Magneto Flange
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
max. 54 [2.13]
R18 [0.71]
70 [2.76]
max. 103 [4.06]
OMS 80
OMS 100
OMS 125
OMS 160
OMS 200
OMS 250
OMS 315
OMS 400
OMS 500
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
68.4
[2.693]
L2
mm
[in]
128
[5.04]
131
[5.16]
136
[5.35]
142
[5.59]
149
[5.87]
157
[6.18]
169
[6.65]
182
[7.17]
182
[7.17]
Output shaft
Cyl.1 in
Splined 1 in
Cyl.1.25 in
Splined 1.25 in
C:
D:
E:
max
min
max
min
L3
mm
[in]
49
[1.93]
47
[1.85]
54
[2.13]
52
[2.05]
Drain connection
7
16 - 20 UNF;
12 mm [0.47 in] deep
O-ring boss port
M10; 13 mm [0.51 in] deep
7
8 - 14 UNF;
16.7 mm [0.657 in] deep
O-ring boss port
22.5
106.8 [4.205]
106.0 [4.173]
Lmax
mm
[in]
171
[6.73]
174
[6.85]
179
[7.05]
185
[7.28]
192
[7.56]
200
[7.87]
212
[8.35]
225
[8.86]
225
[8.86]
Type
22.5
151-1980.10
27
OMS
Technical Information
Dimensions US Version
101.60 [4.000]
101.55 [3.998]
5.6 [0.22]
4.4 [0.17]
3.5 [0.138]
3.3 [0.130]
1 [0.04]x45
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
56 [2.20]
L1
L2
21 [0.83]
66.5 [2.618]
64.7 [2.547]
14.3 [0.570]
9.7 [0.382]
9.3 [0.366]
56.5 [2.224]
55.5 [2.185]
R1 [0.04]
18 [0.71]
L3
SAE-B Flange
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
max. 54 [2.13]
R18 [0.71]
70 [2.76]
OMS 100
OMS 125
OMS 160
28
max
Splined 0.875 in
min
C:
D:
E:
Drain connection
716 - 20 UNF;
12 mm [0.47 in] deep
O-ring boss port
M10; 13 mm [0.51 in] deep
78 - 14 UNF;
16.7 mm [0.657 in] deep
O-ring boss port
6]
.9
[4
OMS 500
min
26
OMS 400
max
Splined 1.25 in
L3
mm
[in]
57
[2.24]
55
[2.17]
42
[1.65]
40
[1.57]
.1
OMS 315
Output shaft
ax
OMS 250
L2
mm
[in]
124
[4.88]
127
[5.00]
132
[5.20]
138
[5.43]
145
[5.71]
153
[6.02]
165
[6.50]
178
[7.01]
178
[7.01]
OMS 200
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
68.4
[2.693]
R10 [0.39]
OMS 80
Lmax
mm
[in]
167
[6.57]
170
[6.69]
175
[6.89]
181
[7.13]
188
[7.40]
196
[7.72]
208
[8.19]
221
[8.70]
221
[8.70]
146.05 [5.750]
Type
Rmin. 14 [0.55]
40 [1.57]
151-1981.10
OMS
Technical Information
Dimensions European Version
Wheel
125.000 [4.9213]
124.937 [4.9188]
58 [2.28]
max. 73 [2.87]
L1
1 [0.04]x45
R6 [0.24]
R1 [0.04]
48 [1.89]
C
5.6 [0.22]
4.4 [0.17]
L2
16 [0.63]
28.5 [1.12]
20 [0.79]
9 [0.35]
7 [0.28]
43.9 [1.738]
42.5 [1.673]
104 [4.09]
102 [4.02]
16
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
16.3 [0.642]
15.7 [0.618]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
R18 [0.71]
max. 54 [2.13]
56 [2.20]
21.3 [0.839]
20.7 [0.815]
70 [2.76]
max. 103 [4.06]
R12 [0.47]
C:
D:
E:
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
L2
mm
[in]
87
[3.43]
90
[3.54]
95
[3.74]
101
[3.98]
108
[4.25]
116
[4.57]
128
[5.04]
142
[5.59]
13.5 [0.531]
OMSW
80
OMSW
100
OMSW
125
OMSW
160
OMSW
200
OMSW
250
OMSW
315
OMSW
400
Lmax
mm
[in]
129
[5.08]
132
[5.20]
137
[5.39]
143
[5.63]
150
[5.91]
158
[6.22]
170
[6.69]
183
[7.20]
Type
16
15 0.4 [6
9.6 .3
[6. 15]
28
3]
151-1812.10
Drain connection
G 14; 12 mm [0.47 in] deep
M10; 13 mm [0.51 in] deep
G 12; 15 mm [0.59 in] deep
29
OMS
Technical Information
Dimensions US Version
Wheel
127.05 [5.000]
126.95 [4.998]
max. 73 [2.87]
R6 [0.24]
1 [0.04]x45
8 [0.31]
28.5 [1.12]
21 [0.83]
27.6 [1.047]
26.4 [1.039]
22.6 [0.890]
21.4 [0.850]
56 [2.20]
C
5.6 [0.22]
4.4 [0.17]
L1
L2
16 [0.63]
L3
R1 [0.04]
16
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
16.3 [0.642]
15.7 [0.618]
21.3 [0.839]
20.7 [0.815]
max. 52 [2.05]
max. 54 [2.13]
R18 [0.71]
70 [2.76]
R12 [0.47]
OMSW
80
OMSW
100
OMSW
125
OMSW
160
OMSW
200
OMSW
250
OMSW
315
OMSW
400
OMSW
500
Lmax
mm
[in]
130
[5.12]
133
[5.24]
138
[5.43]
144
[5.67]
151
[5.94]
159
[6.26]
171
[6.73]
184
[7.24]
184
[7.24]
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
68.4
[2.693]
L2
mm
[in]
88
[3.46]
91
[3.58]
96
[3.78]
102
[4.02]
109
[4.29]
117
[4.61]
129
[5.08]
142
[5.59]
142
[5.59]
Output shaft
max
Cyl.1.25 in
min
max
Tapered 1.25 in
min
C:
D:
E:
L3
mm
[in]
94
[3.70]
92
[3.62]
104
[4.09]
102
[4.02]
Drain connection
716 - 20 UNF;
12 mm [0.47 in] deep
O-ring boss port
M10; 13 mm [0.51 in] deep
78 - 14 UNF;
16.7 mm [0.657 in] deep
O-ring boss port
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 13 mm [0.51 in] deep E:
G 12; 15 mm [0.59 in] deep
30
Type
13.5 [0.531]
.9
1
16
4]
37
[6.
151-1982.10
OMS
Technical Information
Dimensions European Version
Short
Type
OMSS
80
OMSS
100
OMSS
125
OMSS
160
OMSS
200
OMSS
250
OMSS
315
OMSS
400
Lmax
mm
[in]
124
[4.88]
128
[5.04]
132
[5.20]
138
[5.43]
145
[5.71]
154
[6.06]
165
[6.50]
179
[7.05]
L1
mm
[in]
14.0
[0.551]
17.4
[0.685]
21.8
[0.858]
27.8
[1.094]
34.8
[1.370]
43.5
[1.713]
54.8
[2.157]
68.4
[2.693]
L2
mm
[in]
83
[3.27]
86
[3.39]
90
[3.54]
96
[3.78]
103
[4.06]
112
[4.41]
123
[4.84]
137
[5.39]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 13 mm [0.51 in] deep E:
G 12; 15 mm [0.59 in] deep
31
OMS
Technical Information
OMSS
Installing the OMSS
The cardan shaft of the OMSS motor acts as an output shaft. Because of the movement
of the shaft, no seal can be fitted at the shaft output.
Internal oil leakage from the motor will therefore flow into the attached component.
During start and operation it is important that the spline connection and the bearings
in the attached component receive oil and are adequately lubricated. To ensure that the
spline connection receives sufficient oil, a conical sealing ring between the shaft of the
attached component and the motor intermediate plate is recommended. This method is
used in the OMS.
The conical sealing ring (code. no. 633B9023) is supplied with the motor.
To ensure that oil runs to the bearings and other parts of the attached component, the
stop plate must have a hole in it (see fig. below).
We recommend an O-ring between motor and attached component. The O-ring
(code no. 151F1033) is supplied with the motor. If motor and attached component have
been separated, remember to refill before starting up. Fill the oil through the drain
connection.
OMSS
Dimensions of the
Attached Component
2.35 [0.093]
2.25 [0.089]
A
E
15 [0.59]
27.3 [1.075]
26.7 [1.051]
8.4 [0.331]
8.0 [0.315]
40.5 [1.594]
40.3 [1.587]
61.5 [2.421]
60.5 [2.382]
108.0 [4.252]
107.6 [4.236]
33 [1.30]
31 [1.22]
min. 40 [1.57]
100 [3.94]
G H
0.25 [0.010]
0.1
29.5 [1.161]
28.5 [1.122]
35.5 [1.398]
34.5 [1.358]
min. 4 [0.16]
K
K
6.2 [0.244]
5.8 [0.228]
52.3 [2.059]
51.7 [2.035]
28 [1.10]
26 [1.02]
34.2 [1.346]
33.8 [1.331]
16.5 [0.650]
15.5 [0.610]
151-873.10
A: O-ring: 100 3 mm
B: External drain channel
C: Drain connection G 14; 12 mm [0.47 in] deep
D: Conical seal ring
32
E:
F:
G:
H:
OMS
Technical Information
OMSS
Internal Spline Data for
the Component to be
Attached
The attached component must have internal splines corresponding to the external
splines on the motor cardan shaft (see drawing below).
Material:
Case hardening steel with a tensile strength corresponding at least to 20 MoCr4
(900 N/mm2) or SAE 8620.
Hardening specification:
On the surface: HV = 750 50
0.7 0.2 mm under the surface: HV = 560
Internal involute spline data
Standard ANS B92.1-1970, class 5 (corrected m X = 0.8; m = 2.1166)
Flat root side fit
Number of
z
teeth
Pitch
DP
Pressure angle
Pitch dia.
D
Major dia.
Dri
Form dia.
(min.)
Minor dia.
Space width
(circular)
Tooth thickness
(circular)
Fillet radius
Max. mea
surement
between pins*
Pin dia.
Dfi
mm
in
12
12
12/24
30
25.4
12/24
30
1.0
1.10 00.004
28.0 00.1
27.6
1.09
Di
23.0 0+0.033
0.9055 0+0.0013
Lo
4.308 0.020
0.1696 0.0008
So
2.341
0.09217
0.2
0.008
17.62 0+0.15
0.700 00.006
4.835 0.001
0.1903 0.00004
Rmin.
Rmin
Lo
So
Dri
l
d
Di
Dfi
D
151-874.10
Drain Connection on
OMSS or Attached
Component
A drain line ought to be used when pressure in the return line can exceed the
permissible pressure on the shaft seal of the attached component.
The drain line can be connected at two different points:
1) at the motor drain connection
2) at the drain connection of the attached component.
If a drain line is fitted to the attached component, it must be possible for oil to flow freely
between motor and attached component.
The drain line must be led to the tank in such a way that there is no risk of the motor and
attached component being drained of oil when at rest.
The maximum pressure in the drain line is limited by the attached component and its
shaft seal.
33
OMT
Technical Information
Versions
Wheel
Brake-wheel
Brakestandard
Short
1 1/16-12 UN
Splined 1.5 in
G 3/4
l
l
1 1/16-12 UN
Yes
Yes
OMT
Yes
Yes
OMT
Yes
Yes
OMT
Yes
Yes
OMT
Yes
Yes
OMT
Yes
Yes
OMT
Tapered 45 mm
G 3/4
Tapered 1.75 in
1 1/16-12 UN
P.t.o.
G 3/4
Yes
Yes
OMT
Cyl. 40 mm
G 3/4
Yes
Yes
OMTW
Tapered 45 mm
G 3/4
Yes
Yes
OMTW
Tapered 1.75 in
1 1/16-12 UN
Yes
Yes
G 3/4
Yes
No
G 3/4
Yes
No
Cyl. 40 mm
G 3/4
Yes
No
Splined 1.5 in
G 3/4
Yes
No
Cyl. 40 mm
G 3/4
Yes
No
OMT FH
Splined 1.5 in
G 3/4
Yes
No
OMT FH
No output shaft
G 3/4
Yes
Yes
l
l
34
US version
Check valve
G 3/4
Cyl. 1.5 in
European version
Port size
Cyl. 40 mm
Drain connection
Standard
flange
Shaft
Mounting flange
OMT
Versions
OMTW
OMT FX
OMT FX
OMT FL
OMT FL
OMTS
Function diagram - see page :
OMT
Technical Information
Code Numbers
Code Numbers
200
3001
250
3002
315
3003
400
3004
500
3005
Dimensions Page
36
40
49
151B
2050
2051
2052
2053
2054
2055
36
40
50
151B
3006
3007
3008
3009
3010
3011
36
40
49
151B
2056
2057
2058
2059
2060
2061
36
40
50
151B
3012
3013
3014
3015
3016
3017
36
40
49
151B
2062
2063
2064
2065
2066
2067
36
40
50
151B
3018
3019
3020
3021
3022
3023
36
40
49
151B
3024
3025
3026
3027
3028
3029
36
40
51
151B
3030
3031
3032
3033
3034
3035
36
40
51
151B
2080
2081
2082
2083
2084
2085
36
40
52
151B
3207
3208
3209
3210
3211
3212
36
41
53
151B
3200
3201
3202
3203
3204
3205
36
41
53
151B
4000
4001
4002
4003
4004
4005
36
41
54
151B
4007
4008
4009
4010
4011
4012
36
41
54
151B
4021
4022
4023
4024
4025
4026
36
41
54
151B
4028
4029
4030
4031
4032
4033
36
41
54
151B
3036
3037
3038
3039
3040
3041
36
55
42
42
43
43
44
44
Code Numbers
151B
160
3000
Displacement [cm3]
Ordering
Add the four digit prefix 151B to the four digit numbers from the chart for complete
code number.
Example:
151B3002 for an OMT 250 with standard flange, cyl. 40 mm shaft and port size G 3/4.
Orders will not be accepted without the four digit prefix.
35
OMT
Technical Information
Technical Data
Technical data
for OMT, OMTW, OMTS, OMT FX OMT FL and OMT FH
Type
Motor size
Geometric displacement
cm3
[in3]
Max. speed
min-1
[rpm]
Max. torque
Nm
[lbfin]
Max. output
cont.
int1)
cont.
int.1)
cont.
kW
[hp]
int.1)
cont.
bar
[psi]
int.1)
peak2)
l/min
[USgal/min]
cont.
int.1)
bar
[psi]
at max. press. drop cont.
Nm [lbfin]
at max. press. drop int.1)
Nm [lbfin]
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
160
161.1
[9.83]
625
780
470
[4160]
560
[4960]
26.5
[35.5]
32.0
[42.9]
200
[2900]
240
[3480]
280
[4060]
100
[26.4]
125
[33.0]
10
[145]
340
[3010]
410
[3630]
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
200
201.4
[12.29]
625
750
590
[5220]
710
[6280]
33.5
[44.9]
40.0
[53.6]
200
[2900]
240
[3480]
280
[4060]
125
[33.0]
150
[39.6]
10
[145]
430
[3810]
520
[4600]
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
250
251.8
[15.37]
500
600
730
[6460]
880
[7790]
33.5
[44.9]
40.0
[53.6]
200
[2900]
240
[3480]
280
[4060]
125
[33.0]
150
[39.6]
10
[145]
530
[4690]
630
[5580]
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
315
326.3
[19.91]
380
460
950
[8410]
1140
[10090]
33.5
[44.9]
40.0
[53.6]
200
[2900]
240
[3480]
280
[4060]
125
[33.0]
150
[39.6]
10
[145]
740
[6550]
890
[7880]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.
2) Peak load: the permissible values may occur for max. 1% of every minute.
For max. permissible combination of flow and pressure, see function diagram for actual motor.
36
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
400
410.9
[25.07]
305
365
1080
[9560]
1260
[11150]
30.0
[40.2]
35.0
[46.9]
180
[2610]
210
[3050]
240
[3480]
125
[33.0]
150
[39.6]
10
[145]
840
[7430]
970
[8590]
OMT
OMTW
OMTS
OMT FX
OMT FL
OMT FH
500
523.6
[31.95]
240
285
1220
[10800]
1370
[12130]
26.5
[35.5]
30.0
[40.2]
160
[2320]
180
[2610]
210
[3050]
125
[33.0]
150
[39.6]
10
[145]
950
[8410]
1060
[9380]
OMT
Technical Information
Technical Data
Technical data
for OMT, OMTW, OMTS, OMT FX OMT FL and OMT FH
Type
OMT, OMTW,
OMTS, OMT FX,
OMT FL, OMT FH
210
[3050]
250
[3630]
300
[4350]
Brake-release
pressure3)
12 bar
[170 psi]
30 bar
[440 psi]
Max pressure
in brake line
30 bar
[440 psi]
280 bar
[4060 psi]
cont.
int.1)
peak2)
Brake motors
Type
OMT FX,
OMT FL
OMT FH
Max. presssure
in drain line3)
5 bar
[70 psi]
5 bar
[70 psi]
Holding
torque4)
1200 Nm
[10620 lbfin]
1200 Nm
[10620 lbfin]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.
2) Peak load: The permissible values may occur for max. 1% of every minute.
3) Brake motors must always have a drain line. The brake-release pressure is the difference between the pressure in the brake line and the
pressure in the drain line.
4) For the supply of motors with holding torques higher than those stated, please contact the Sauer-Danfoss Sales Organization.
For max. permissible combination of flow and pressure, see function diagram for actual motor.
37
OMT
Technical Information
Technical Data
Max. Permissible Shaft
Seal Pressure
151-1405.10
Max. return pressure without drain line or max. pressure in the drain line
P
psi
1500
1200
P
bar
100
90
80
70
900
60
50
600
40
30
300
20
10
0
0
100
200
300
400
500
600
700
800
max.
min-1
(rpm)
151-1674.10
Intermittent operation: the permissible values may occur for max. 10% of every minute.
38
Continuous operation
OMT
Technical Information
Technical Data
Pressure Drop in Motor
p
psi
bar
16
200
14
12
150
10
8
100
50
6
4
2
0
0
0
20
4
40
8
60
12
16
80
100
20
24
120
28
32
140
l/min
36 US gal/min
151-1409.10
The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]
Oil Flow in Drain Line
Pressure
drop
bar
[psi]
Viscosity
mm2/s
[SUS]
20
[100]
35
[165]
20
[100]
35
[165]
140
[2030]
210
[3050]
Direction of Shaft
Rotation
Oil flow in
drain line
l/min
[US gal/min]
2.5
[0.66]
1.5
[0.40]
5.0
[1.32]
3.0
[0.79]
151-1050.10
39
OMT
Technical Information
Technical Data
Permissible Shaft Loads
for OMT
Mounting flange:
Standard
Shaft:
All shaft types
Prad. Prad.
lbf
14000
60000
12000
0
- +
Pmax. =10000 N
=2248 lbf
50000
10000
40000
8000
30000
6000
20000
4000
10000
2000
0
-60
-40
-2
-20
-1.5
-1
-0.5
20
0.5
40
1.5
60
80
2.5
100
3.5
120
4.5
140 mm
5.5
in
151-1967.10
Mounting flange:
Wheel
Shaft:
All shaft types
Prad. Prad.
lbf
14000
12000
N
60000
0
- +
Pmax. =10000 N
=2248 lbf
50000
10000
40000
8000
30000
6000
4000
20000
2000
10000
20
40
60
80
100
120
140
160 mm
in
151-1970.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
40
OMT
Technical Information
Technical Data
Permissible Shaft Loads
for OMT
Mounting flange:
Brake-wheel
Shaft:
All shaft types
Prad. Prad.
lbf
5500
25000
0
- +
5000
Pmax. =5000 N
=1124 lbf
20000
4500
Pmax. =7000 N
4000
3500
=1574 lbf
15000
3000
2500
10000
2000
1500
5000
1000
500
20
0.5
40
60
1.5
80
2.5
100
3.5
120
4.5
140 mm
5.5 in
151-1966.10
Mounting flange:
Brake-standard
Shaft:
All shaft types
Prad. Prad.
lbf
14000
12000
N
60000
0
- +P
max. =10000 N
=2248 lbf
50000
10000
40000
8000
30000
6000
4000
20000
2000
10000
0
-80
-3
-60
-2.5
-40
-2
-1.5
-20
-1
-0.5
20
0.5
40
1.5
60
2.5
80
100
3.5
120 mm
4.5
in
151-1968.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
520L0407 Rev EL Dec 2013
41
OMT
Technical Information
Function Diagrams
Function Diagrams
5000
500
4000
450
3000
2500
2000
1500
1000
Q=125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
80 l/min
[21.1 US gal/min]
p=240 bar
550
4500
3500
60 l/min
[15.9 US gal/min]
600
40 l/min
[10.6 US gal/min]
Nm
20 l/min
[5.3 US gal/min]
5500
Q=10 l/min
[2.6 US gal/min]
OMT 160
lbfin
35hp
400
25hp
250
85%
150
120 bar
1740 psi
15kW
10kW
10hp
N=5kW
5hp
100
20kW
20hp
t =86%
200
160 bar
2320 psi
30hp
300
50
200 bar
2900 psi
30kW
25kW
350
500
3480 psi
N=35kW
15hp
80 bar
1160 psi
p= 40 bar
80%
t =70%
0
100
580 psi
200
300
400
500
600
700
800
min-1
(rpm)
151-493.10
6000
5500
Q=150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
600
550
500
4000
450
3500
400
3000
350
1500
35kW
650
4500
2000
80 l/min
[21.1 US gal/min]
700
5000
2500
60 l/min
[15.9 US gal/min]
750
40 l/min
[10.6 US gal/min]
6500
Nm
Q=10 l/min
[2.6 US gal/min]
lbfin
20 l/min
[5.3 US gal/min]
OMT 200
10kW
10hp
N=5kW
25hp
15kW
15hp 20hp
40hp
160 bar
2320 psi
30hp
87%
t =88%
120 bar
1740 psi
85%
5hp
150
50
35hp
20kW
200
100
200 bar
2900 psi
25kW
250
500
3480 psi
30kW
300
1000
p=240 bar
N=40kW
80 bar
1160 psi
80%
p= 40 bar
t =70%
0
50
100
150
200
250
300
350
400
450
580 psi
500
550
600
650
700
750
min-1
(rpm)
151-494.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
42
OMT
Technical Information
Function Diagrams
Function Diagrams
p=240 bar
30kW
6000
5000
25kW
600
20kW
3480 psi
N=40kW
400
25hp
100
80 bar
1160 psi
85%
10hp
5hp
1000
120 bar
1740 psi
t =87%
300
N=5kW
160 bar
2320 psi
20hp
15hp
10kW
200
200 bar
2900 psi
40hp
35hp
30hp
15kW
4000
2000
35kW
700
500
3000
Q=150 l/min
[39.6 US gal/min]
800
125 l/min
[33.0 US gal/min]
7000
100 l/min
[26.4 US gal/min]
900
80 l/min
[21.1 US gal/min]
8000
60 l/min
[15.9 US gal/min]
9000
40 l/min
[10.6 US gal/min]
Nm
20 l/min
[5.3 US gal/min]
Q=10 l/min
[2.6 US gal/min]
OMT 250
lbfin
80%
p= 40 bar
t =70%
0
50
100
150
200
250
300
350
580 psi
400
450
500
550
600
min-1
(rpm)
151-495.10
10000
8000
900
7000
800
4000
3000
2000
Q=150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
80 l/min
[21.1 US gal/min]
60 l/min
[15.9 US gal/min]
p=240 bar
1100
1000
5000
40 l/min
[10.6 US gal/min]
1200
9000
6000
Q=10 l/min
[2.6 US gal/min]
11000
Nm
20 l/min
[5.3 US gal/min]
OMT 315
lbfin
35kW
30kW
25kW
20hp
15kW
15hp
700
600
500
10hp
400
5hp
300
20kW
25hp
3480 psi
N=40kW
200 bar
2900 psi
40hp
160 bar
2320 psi
30hp 35hp
120 bar
1740 psi
10kW
N=5kW
t =88%
87%
80 bar
1160 psi
85%
80%
p= 40 bar
200
1000
100
t =70%
0
50
100
150
580 psi
200
250
300
350
400
450
500
min-1
(rpm)
151-869.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
43
OMT
Technical Information
Function Diagrams
Function Diagrams
11000
10000
900
7000
800
3000
Q=150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
80 l/min
[21.1 US gal/min]
3050 psi
1100
8000
4000
p=210 bar
1200
1000
5000
60 l/min
[15.9 US gal/min]
1300
9000
6000
40 l/min
[10.6 US gal/min]
12000
Nm
20 l/min
[5.3 US gal/min]
lbfin
Q=10 l/min
[2.6 US gal/min]
OMT 400
N=30kW
20kW
10hp
600
500
300
1000
100
15kW
10kW
87%
t =89%
5kW
5hp
400
200
150 bar
2180 psi
25kW
700
2000
180 bar
2610 psi
120 bar
1740 psi
30hp
25hp
20hp
90 bar
1300 psi
15hp
85%
2.5hp
60 bar
870 psi
80%
N=2.5kW
p= 30 bar
t =70%
0
25
50
75
100
125
150
175
200
225
440 psi
250
275
300
325
350
375
min-1
(rpm)
151-1058.10
Q=150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
80 l/min
[21.1 US gal/min]
60 l/min
[15.9 US gal/min]
1500
40 l/min
[10.6 US gal/min]
Nm
20 l/min
[5.3 US gal/min]
lbfin
Q=10 l/min
[2.6 US gal/min]
OMT 500
12500
p=180 bar
2610 psi
1250
10000
30hp
1000
10hp
750
5000
5kW
500
N=2.5kW
2500
25kW
20kW
7500
20hp
t =90%
90 bar
1300 psi
15hp
5hp
60 bar
870 psi
87%
85%
2.5hp
250
25hp
15kW
10kW
160 bar
2320 psi
140 bar
2030 psi
120 bar
1740 psi
N=30kW
t =80%
p= 30 bar
440 psi
0
0
25
50
75
100
125
150
175
200
225
250
275
300
min-1
(rpm)
151-1116.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
44
OMT
Technical Information
Shaft Version
Shaft Version
82 [3.23]
26 [1.02]
9.5 [0.374]
45
M12
R0.5 [0.020]
A-A
43.00 [1.693]
42.71 [1.681]
45 [1.77]
A: Cylindrical 40 mm shaft
C: Parallel key
A12 8 70
DIN 6885
Keyway deviates from
standard
40.018 [1.5755]
40.002 [1.5749]
A
70.5 [2.776]
70.0 [2.756]
5.5 [0.217]
4.5 [0.177]
12.000 [0.4724]
11.957 [0.4707]
82.2 [3.236]
81.8 [3.220]
min. 20 [0.78]
45
3/8 -16 UNC
R0.5 [0.020]
A-A
42.40 [1.669]
42.14 [1.659]
38.10 [1.500]
38.05 [1.498]
45 [1.77]
A
57.5 [2.264]
56.9 [2.240]
11.5 [0.453]
9.3 [0.366]
9.545 [0.3758]
9.525 [0.3750]
151-1032.10
45
OMT
Technical Information
Shaft Version
Shaft Version
82 [3.23]
26 [1.02]
9.5 [0.374]
45
M12
R0.5 [0.020]
A-A
38.100 [1.5000]
38.075 [1.4990]
45 [1.77]
C.
A
58 [2.28]
56 [2.20]
82.2 [3.236]
81.8 [3.220]
min. 20 [0.78]
45
3/8 -16 UNC
R0.5 [0.020]
A-A
38.100 [1.5000]
38.075 [1.4990]
45 [1.77]
US version
D. Involute splined shaft
ANS B92.1 - 1970 standard
Flat root side fit
Pitch 12/24
Teeth 17
Major dia. 1.50 in
Pressure angle 30
A
58 [2.28]
56 [2.20]
151-1916.10
46
OMT
Technical Information
Shaft Version
Shaft Version
A-A
24.15 [0.951]
23.95 [0.943]
56 [2.20]
7 [0.28]
M30x2
6 [0.24]
45 [1.77]
E: Tapered 45 mm shaft
(ISO/R775)
I: DIN 937
Across flats: 46 mm
Tightening torque:
500 30 Nm [4430 270 lbfin]
H: Taper 1:10
J: Parallel key
B12 8 28
DIN 6885
Keyway deviates from
standard
A
34 [1.34]
4 [0.16]
54 [2.13]
12.000 [0.4724]
11.957 [0.4707]
22 [0.87]
82 [3.23]
K
F: Tapered 1.75 in shaft
K: Cone 1:8
SAE J501
L: 1 1/4 - 18 UNEF
Across flats 2 3/16 in
Tightening torque:
500 10 Nm (4425 90 lbfin)
M: Parallel key
7
7
1
/16 /16 1 /4
B.S. 46
Keyway deviates from
standard
16 [0.63]
A-A
5.71 [0.225]
5.61 [0.221]
4 [0.16]
45 [1.77]
32.1 [1.264]
31.5 [1.240]
11.150 [0.4390]
11.130 [0.4382]
59.00 [2.323]
57.80 [2.276]
4.5 [0.177]
80.8 [3.181]
80.0 [3.150]
102 [4.02]
45
R6.7 [0.267]
R5 [0.20]
60
A-A
29.5 [1.161]
29.3 [1.154]
34.85 [1.372]
34.73 [1.367]
A
45 [1.77]
R0.5 [0.020]
7 [0.28]
]
40
0.3 36]
4[
8.6 3 [0.3
8.5
G. P.t.o. shaft
DIN 9611 Form 1
(ISO/R500 without pin hole)
28.14 [1.108]**
27.89 [1.098]
38.25 [1.506]
37.75 [1.486]
77 [3.03]
75 [2.95]
151-1917.10
47
OMT
Technical Information
Technical Data
Port Thread Versions
B
41.5 [1.634]
41.0 [1.614]
F
min. 19 [0.75]
min. 12 [0.47]
A: G main ports
E: ISO 228/1 - G3/4
O-ring boss port
C
G
B: UN main ports
F: 1 1/16 - 12 UN
D
H
min. 13 [0.51]
min. 18 [0.67]
151-1977.11
C: G drain port
D: UNF drain port
9
G: ISO 228/1 - G1/4 H:
/16 - 18 UNF
O-ring boss port
48
OMT
Technical Information
Dimensions European Version
Dimensions
Standard Flange
125.000 [4.9213]
124.937 [4.9188]
123.8 [4.874]
122.2 [4.811]
31 [1.22]
R1.6 [0.063]
22.4 [0.882]
72 [2.83]
64 [2.52]
L1
22.1 [0.870]
21.1 [0.831]
22.1 [0.870]
21.1 [0.831]
20.3 [0.799]
19.7 [0.776]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
max. 69 [2.72]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
23.6 [0.929]
22.4 [0.882]
L2
18 [0.71]
60 [2.36]
32 [1.26]
9 [0.35]
L3
73 [2.87]
71 [2.80]
max. 67 [2.64]
max. 71 [2.80]
22.1 [0.870]
21.1 [0.831]
100 [3.94]
OMT 160
OMT 200
OMT 250
OMT 315
OMT 400
OMT 500
Lmax
mm
[in]
190
[7.48]
195
[7.68]
201
[7.91]
211
[8.31]
221
[8.70]
235
[9.25]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
140
[5.51]
145
[5.71]
151
[5.94]
161
[6.34]
171
[6.73]
185
[7.28]
Output shaft
All shafts except
P.t.o. shaft
P.t.o. shaft
L3
mm
[in]
82
max.
[3.23]
102
max.
[4.02]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 10 mm [0.39 in] deep
E: G 34; 17 mm [0.67 in] deep
1
1 60.4
59 [6
.6
[6. .315
28 ]
3]
Type
R12 [0.47]
151-889.11
49
OMT
Technical Information
Dimensions US Version
Standard Flange
127.00 [5.000]
126.95 [4.998]
123.8 [4.874]
122.2 [4.811]
31 [1.22]
R0.8 [0.003]
22.4 [0.882]
73.7 [2.902]
71.5 [2.815]
64.5 [2.539]
63.5 [2.500]
L1
23.6 [0.929]
22.4 [0.882]
max. 69 [2.72]
L2
18 [0.71]
60 [2.36]
9 [0.35]
33.15 [1.305]
30.85 [1.215]
L3
86.5 [3.406]
85.5 [3.366]
20.3 [0.799]
19.7 [0.776]
20.3 [0.799]
19.7 [0.776]
max. 67 [2.64]
max. 75 [2.95]
100 [3.94]
OMT 160
OMT 200
OMT 250
OMT 315
OMT 400
OMT 500
50
Lmax
mm
[in]
190
[7.48]
195
[7.68]
201
[7.91]
211
[8.31]
221
[8.70]
235
[9.25]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
140
[5.51]
145
[5.71]
151
[5.94]
161
[6.34]
171
[6.73]
185
[7.28]
Output shaft
Cyl. 1.5 in
Splined 1.5 in
Tapered 1.75 in
L3
mm
[in]
82
[3.23]
80.4
[3.17]
1
1 62.
61 3 [6
.5
[6. .390
35 ]
8]
Type
R12.5 [0.492]
151-889.11.22
OMT
Technical Information
Dimensions European Version
Wheel
172.000 [6.7717]
171.937 [6.7692]
160.000 [6.2992]
159.937 [6.2967]
126.25 [4.970]
123.75 [4.872]
8 [0.31]
R1.2 [0.047]
max. 69 [2.72]
13.0 [0.512]
12.0 [0.472]
22.1 [0.870]
21.1 [0.831]
22.1 [0.870]
21.1 [0.831]
20.3 [0.799]
19.7 [0.776]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
13.0 [0.512]
12.0 [0.472]
D
23.6 [0.929]
22.4 [0.882]
98.2 [3.866]
90.3 [3.555]
R1.2 [0.047]
45
18 [0.71]
4 [0.16]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
L2
L1
7 [0.28]
78.2 [3.079]
99 [3.90]
2 [0.08]x45
82 [3.23]
123.8 [4.874]
122.2 [4.811]
73 [2.87]
71 [2.80]
max. 67 [2.64]
max. 71 [2.80]
75 [2.95]
22.1 [0.870]
21.1 [0.831]
100 [3.94]
L2
mm
[in]
73
[2.87]
78
[3.07]
84
[3.31]
94
[3.70]
104
[4.09]
118
[4.65]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 10 mm [0.39 in] deep
E: G 34; 17 mm [0.67 in] deep
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
18 [0.71]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
2
1 00.4
99 [7
.6
[7. .890
85 ]
8]
OMTW
160
OMTW
200
OMTW
250
OMTW
315
OMTW
400
OMTW
500
Lmax
mm
[in]
123
[4.84]
128
[5.04]
134
[5.28]
144
[5.67]
154
[6.06]
168
[6.61]
R16 [0.63]
Type
151-897.12
51
OMT
Technical Information
Dimensions US Version
Wheel
172.000 [6.7717]
171.937 [6.7692]
160.000 [6.2992]
159.937 [6.2967]
126.25 [4.970]
123.75 [4.872]
123.8 [4.874]
122.2 [4.811]
45
7 [0.28]
18 [0.71]
23.6 [0.929]
22.4 [0.882]
R1.2 [0.047]
20.3 [0.799]
19.7 [0.776]
20.3 [0.799]
19.7 [0.776]
max. 69 [2.72]
3.5 [0.138]
L2
L1
L
98.2 [3.866]
90.3 [3.555]
R1.2 [0.047]
7 [0.28]
102.1 [4.020]
99.1 [3.902]
78.6 [3.094]
77.5 [3.051]
2 [0.08]x45
80.8 [3.181]
80.0 [3.150]
73 [2.87]
71 [2.80]
max. 67 [2.64]
max. 75 [2.95]
75 [2.95]
100 [3.94]
52
L2
mm
[in]
73
[2.87]
78
[3.07]
84
[3.31]
94
[3.70]
104
[4.09]
118
[4.65]
C: Drain connection
916 - 18 UNF;
13 mm [0.51 in] deep
O-ring boss port
D: 1 116 - 12 UN;
19 mm [0.75 in] deep
O-ring boss port
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
2
1 00.
99 4 [7
.6
[7. .890
85 ]
8]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
OMTW
160
OMTW
200
OMTW
250
OMTW
315
OMTW
400
OMTW
500
Lmax
mm
[in]
123
[4.84]
128
[5.04]
134
[5.28]
144
[5.67]
154
[6.06]
168
[6.61]
R16 [0.63]
Type
18 [0.71]
151-897.11.22
OMT
Technical Information
Dimensions European Version
Brake-Wheel
m
.2
ax
32
1 200
99 .4
.6 [7.8
[7 9
.8 0]
58
]
.
[9
75 [2.95]
13.2 [0.520]
12.8 [0.504]
4.2 [0.165]
3.8 [0.150]
111.4 [4.386]
110.6 [4.354]
120.0 [4.724]
119.6 [4.709]
76.0 [2.992]
75.8 [2.984]
L max. 1
L max. 2
L1
L2
7.2 [0.283]
6.8 [0.268]
35 [1.38]
95.8 [3.772]
95.6 [3.764]
115.4 [4.543]
114.6 [4.512]
10.2 [0.402]
9.8 [0.386]
201 [7.91]
180.00 [7.087]
179.6 [7.074]
5.2 [0.205]
4.8 [0.189]
12.2 [0.480]
11.8 [0.465]
22 [0.87]
71 [2.80]
67 [2.64]
13
L2
mm
[in]
62
[2.45]
67
[2.65]
74
[2.89]
83
[3.26]
93
[3.67]
107
[4.22]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
13 [0.51]
12 [0.47]
11.1 [0.437]
10.9 [0.429]
23.3 [0.917]
22.7 [0.894]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
23.1 [0.909]
22.9 [0.902]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
100 [3.94]
128 [5.04]
172.00 [6.772]
171.94 [6.769]
10x36
OMT
160 FX
OMT
200 FX
OMT
250 FX
OMT
315 FX
OMT
400 FX
OMT
500 FX
Lmax 2
mm
[in]
227
[8.94]
232
[9.13]
238
[9.37]
247
[9.72]
258
[10.16]
272
[10.71]
5x72
4x90
Type
Lmax 1
mm
[in]
223
[8.78]
228
[8.98]
234
[9.21]
243
[9.57]
254
[10.00]
268
[10.55]
13 [0.51]
12 [0.47]
140.0 [5.512]
139.6 [5.496]
100.0 [3.937]
99.6 [3.921]
151-1443.11
53
OMT
Technical Information
Dimensions European Version
Brake-Standard
125.000 [4.9213]
124.937 [4.9188]
123.5 [4.862]
122.5 [4.823]
86.2 [3.406]
85.5 [3.366]
31.5 [1.240]
104 [4.09]
32 [1.26]
60 [2.36]
12 [0.47]
R1.6 [0.063]
18 [0.71]
82 [3.23]
12 [0.47]
85.8 [3.378]
L2
90.5 [3.563]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
23.6 [0.929]
22.4 [0.882]
13.0 [0.512]
12.0 [0.472]
13.0 [0.512]
12.0 [0.472]
22.1 [0.870]
21.1 [0.831]
20.3 [0.799]
19.7 [0.776]
max. 67 [2.64]
max. 71 [2.80]
22.1 [0.870]
21.1 [0.831]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
22.1 [0.870]
21.1 [0.831]
100 [3.94]
Type
OMT 160
FL/FH
OMT 200
FL/FH
OMT 250
FL/FH
OMT 315
FL/FH
OMT 400
FL/FH
OMT 500
FL/FH
54
Lmax
mm
[in]
228
[8.98]
233
[9.17]
239
[9.41]
248
[9.76]
259
[10.20]
273
[10.75]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
178
[7.01]
183
[7.20]
189
[7.44]
199
[7.83]
209
[8.23]
223
[8.78]
14 [0.55]
L1
151-1453.10
OMT
Technical Information
Dimensions European Version
Short
max. 186 [7.32]
13 [0.512]
12 [0.472]
31 [1.22]
14 [0.55]
C
max. 69 [2.72]
13 [0.512]
12 [0.472]
8 [0.31]
13 [0.512]
12 [0.472]
22.1 [0.870]
21.1 [0.831]
22.1 [0.870]
21.1 [0.831]
20.3 [0.799]
19.7 [0.776]
20.3 [0.799]
19.7 [0.776]
22.1 [0.870]
21.1 [0.831]
13 [0.512]
12 [0.472]
L1
L2
23.6 [0.926]
22.4 [0.882]
18 [0.71]
22 [0.87]
R1 [0.04]
1 [0.04]x45
8 [0.31]
125.000 [4.9213]
124.937 [4.9188]
28 [1.10]
max. 67 [2.64]
max. 71 [2.80]
E
42 [1.65]
50 [1.97]
22.1 [0.870]
21.1 [0.831]
6 [0.24]
100 [3.94]
28 [1.10]
16
15 0.4 [6.3
9.6
1
[6.2 5]
83]
6 [0.24]
151-898.11
Type
OMTS
160
OMTS
200
OMTS
250
OMTS
315
OMTS
400
OMTS
500
Lmax
mm
[in]
146
[5.75]
151
[5.94]
157
[6.18]
166
[6.54]
177
[6.97]
191
[7.52]
L1*
mm
[in]
16.5
[0.650]
21.5
[0.846]
27.8
[1.094]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
96
[3.78]
101
[3.98]
107
[4.21]
116
[4.57]
127
[5.00]
142
[5.59]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M10; 10 mm [0.39 in] deep E:
G 34; 17 mm [0.67 in] deep
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
55
OMT
Technical Information
OMTS
Installing the OMTS
The cardan shaft of the OMTS motor acts as an output shaft. Because of the movement
of the shaft, no seal can be fitted at the shaft output.
Internal oil leakage from the motor will therefore flow into the attached component.
During start and operation it is important that the spline connection and the bearings
in the attached component receive oil and are adequately lubricated. To ensure that the
spline connection receives sufficient oil, a conical sealing ring between the shaft of the
attached component and the motor intermediate plate is recommended. This method is
used in the OMT.
The conical sealing ring (code. no. 633B9022) is supplied with the motor.
To ensure that oil runs to the bearings and other parts of the attached component, the
stop plate must have a hole in it (see fig. below).
We recommend an O-ring between motor and attached component. The O-ring
(code no. 151B1040) is supplied with the motor. If motor and attached component have
been separated, remember to refill before starting up. Fill the oil through the drain
connection.
OMTS
Dimensions of the
Attached Component
2.35 [0.093]
2.25 [0.089]
G
H
D
2.5 [0.098]
1.5 [0.059]
min. 5 [0.2]
25.5 [1.004]
24.5 [0.965]
46.3 [1.823]
45.7 [1.799]
69.4 [2.732]
68.6 [2.701]
63.5 [2.500]
62.5 [2.461]
51.5 [2.028]
50.5 [1.988]
39.5 [1.555]
38.5 [1.516]
133.0 [5.236]
132.6 [5.220]
min. 55 [2.17]
0.1
53.5 [2.106]
53.5 [2.098]
0.25 [0.010]
125.063 [4.9237]
125.000 [4.9212]
min. 6 [0.24]
K
K
88.5 [3.484]
87.5 [3.445]
8.2 [0.323]
7.8 [0.307]
E
18.5 [0.728]
17.5 [0.689]
30 [1.181]
29 [1.142]
11.4 [0.449]
11.0 [0.433]
151-452.10
A: O-ring: 125 3 mm
B: External drain channel
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: Conical seal ring
56
E:
F:
G:
H:
OMT
Technical Information
OMTS
Internal Spline Data for
the Component to be
Attached
The attached component must have internal splines corresponding to the external
splines on the motor cardan shaft (see drawing below).
Material:
Case hardening steel with a tensile strength corresponding at least to 20 MoCr4
(900 N/mm2) or SAE 8620.
Hardening specification:
On the surface: HV = 750 50
0.7 0.2 mm under the surface: HV = 560
Internal involute spline data
Standard ANS B92.1-1970, class 5 (corrected m X = 1; m = 2.1166)
Flat root side fit
Number of
z
teeth
Pitch
DP
Pressure angle
Pitch dia.
D
Major dia.
Dri
Form dia.
Dfi
(min.)
Minor dia.
Di
Space width
Lo
(circular)
Tooth thickness
So
(circular)
Fillet radius
Rmin.
Max.
measurement l
between pins*
Pin dia.
d
mm
in
16
16
12/24
30
33.8656
38.4 +0.4
0
12/24
30
1.3333
1.5118 +0.0157
0
37.6
1.4803
32.150
4.516
+ 0.04
0
0.037
1.2657 +0 0.00157
0.1777
0 .0014
2.170
0.0854
0.5
0.02
26.9 +0 0.1
1.059 +0.004
0
4.834
0.001
0.1903
Rmin
Lo
So
l
d
Dri
Di
Dfi
D
151-455.10
0.00004
Drain Connection on
OMTS or Attached
Component
A drain line ought to be used when pressure in the return line can exceed the
permissible pressure on the shaft seal of the attached component.
The drain line can be connected at two different points:
1) at the motor drain connection
2) at the drain connection of the attached component.
If a drain line is fitted to the attached component, it must be possible for oil to flow freely
between motor and attached component.
The drain line must be led to the tank in such a way that there is no risk of the motor and
attached component being drained of oil when at rest.
The maximum pressure in the drain line is limited by the attached component and its
shaft seal.
57
OMV
Technical Information
Versions
SAE-C flange
Wheel
Short
Splined 2.125 in
G1
l
l
1 5/16-12 UN
Yes
Yes
OMV
Yes
Yes
OMV
Yes
Yes
OMV
Yes
Yes
OMV
Tapered 60 mm
G1
Yes
Yes
OMV
Tapered 2.25 in
1 5/16-12 UN
Yes
Yes
OMV
Cyl. 2.25 in
1 5/16-12 UN
Yes
Yes
OMV
Splined 2.125 in
1 5/16-12 UN
Yes
Yes
OMV
Cyl. 50 mm
G1
Yes
Yes
OMVW
Tapered 60 mm
G1
Yes
Yes
OMVW
Tapered 2.25 in
1 5/16-12 UN
Yes
Yes
OMVW
No output shaft
G1
l
l
58
US version
1 5/16-12 UN
Check valve
G1
Cyl. 2.25 in
European version
Port size
Cyl. 50 mm
Drain connection
Standard
flange
Shaft
Mounting flange
OMV
Versions
Yes
Yes
OMVS
Function diagram - see page :
OMV
Technical Information
Code Numbers
Code Numbers
400
3101
500
3102
630
3103
800
3104
Dimensions Page
60
63
72
151B
2150
2151
2152
2153
2154
60
63
73
151B
3105
3106
3107
3108
3109
60
63
72
151B
2155
2156
2157
2158
2159
60
63
73
151B
3110
3111
3112
3113
3114
60
63
72
151B
2160
2161
2162
2163
2164
60
63
73
151B
2183
2184
2185
2186
2187
60
64
74
151B
2188
2189
2190
2191
2192
60
64
74
151B
3115
3116
3117
3118
3119
60
63
75
151B
3120
3121
3122
3123
3124
60
63
75
151B
2170
2171
2172
2173
2174
60
63
76
151B
3125
3126
3127
3128
3129
60
77
65
65
66
66
67
Code Numbers
151B
315
3100
Displacement [cm3]
Ordering
Add the four digit prefix 151B to the four digit numbers from the chart for complete
code number.
Example:
151B3101 for an OMV 400 with standard flange, cyl. 50 mm shaft and port size G 1.
Orders will not be accepted without the four digit prefix.
59
OMV
Technical Information
Technical Data
Technical data
for OMV, OMVW and OMVS
OMV
OMVW
OMVS
315
Type
Motor size
Geometric displacement
cm3
[in3]
Max. speed
min-1
[rpm]
Max. torque
Nm
[lbfin]
Max. output
314.5 [19.19]
cont.
int1)
cont.
int.1)
cont.
kW
[hp]
int.1)
cont.
bar
[psi]
int.1)
peak2)
l/min
[USgal/min]
cont.
int.1)
bar
[psi]
at max. press. drop cont.
Nm [lbfin]
at max. press. drop int.1)
Nm [lbfin]
510
630
920
[8140]
1110
[9820]
42.5
[57.0]
51.0
[68.4]
200
[2900]
240
[3480]
280
[4060]
160
[42.3]
200
[52.8]
8
[116]
710
[6280]
850
[7520]
OMV
OMVW
OMVS
400
400.9
[24.46]
500
600
1180
[10440]
1410
[12480]
53.5
[71.7]
64.0
[85.8]
200
[2900]
240
[3480]
280
[4060]
200
[52.8]
240
[63.4]
8
[116]
910
[8050]
1090
[9650]
Type
OMV
OMVW
OMVS
OMV
OMVW
OMVS
500
499.6
[30.49]
400
480
1460
[12920]
1760
[15580]
53.5
[71.7]
64.0
[85.8]
200
[2900]
240
[3480]
280
[4060]
200
[52.8]
240
[63.4]
8
[116]
1130
[10000]
1360
[12040]
OMV
OMVW
OMVS
630
629.1
[38.39]
315
380
1660
[14690]
1940
[17170]
48.0
[64.4]
56.0
[75.1]
180
[2610]
210
[3050]
240
[3480]
200
[52.8]
240
[63.4]
8
[116]
1330
[11770]
1550
[13720]
cont.
int.1)
peak2)
210
[3050]
250
[3630]
300
[4350]
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Peak load: The permissible values may occur for max. 1% of every minute.
1)
2)
For max. permissible combination of flow and pressure, see function diagram for actual motor.
60
OMV
OMVW
OMVS
800
801.8
[48.93]
250
300
1880
[16640]
2110
[18680]
42.5
[57.0]
48.0
[64.4]
160
[2320]
180
[2610]
210
[3050]
200
[52.8]
240
[63.4]
8
[116]
1510
[13360]
1700
[15050]
OMV
Technical Information
Technical Data
Max. Permissible Shaft
Seal Pressure
Max. return pressure without drain line or max. pressure in the drain line
P
psi
1500
1200
P
bar
100
90
80
70
900
60
50
600
40
30
300
20
10
0
0
100
200
300
400
500
600
max.
min-1
(rpm)
151-1673.10
Intermittent operation: the permissible values may occur for max. 10% of every minute.
Continuous operation
61
OMV
Technical Information
Technical Data
Pressure Drop in Motor
p
psi
bar
16
200
14
12
150
10
8
100
50
6
4
2
0
0
20
40
10
60
15
80
20
100
25
120
30
140
35
160
40
180
45
200
50
l/min
US gal/min
151-1410.10
The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s (165 SUS)
Oil Flow in Drain Line
Pressure
drop
bar
[psi]
140
[2030]
210
[3050]
Direction of Shaft
Rotation
62
Viscosity
mm2/s
[SUS]
20
[100]
35
[165]
20
[100]
35
[165]
Oil flow in
drain line
l/min
[US gal/min]
3.0
[0.79]
2.0
[0.53]
6.0
[1.59]
4.0
[1.06]
OMV
Technical Information
Technical Data
Permissible Shaft Loads
for OMV
Mounting flange:
Standard
Shaft:
All shaft types
Prad. Prad.
lbf
16000
14000
12000
N
70000
0
- +
Pmax. =15000 N
80
100
=3372 lbf
60000
50000
10000
40000
8000
6000
4000
2000
30000
20000
10000
0
-80
-3
-60
-2.5
-40
-2
-20
-1.5
-1
-0.5
20
0.5
40
60
1.5
2.5
3.5
120 mm
4.5
in
151-1973.10
Mounting flange:
Wheel
Shaft:
All shaft types
Prad. Prad.
lbf
16000
14000
12000
N
70000
0
- +
60000
Pmax. =15000 N
=3372 lbf
50000
10000
40000
8000
6000
4000
30000
20000
2000
10000
20
40
60
80
100
120
140
160
180
200 mm
in
151-1969.10
The output shaft runs in tapered roller bearings that permit high axial and radial forces.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of
the distance from the mounting flange to the point of load application.
The curve is based on B10 bearing life (2000 hours or 12,000,000 shaft revolutions at
100 min-1) at rated output torque, when mineral-based hydraulic oil with a sufficient
content of anti-wear additives, is used.
For 3,000,000 shaft revolutions or 500 hours increase these shaft loads with 52%.
The dash curve shows max. radial shaft load. Any shaft load exceeding the values shown
in the curve will involve a risk of breakage.
Bearing life calculations can be made using the explanation and formula provided in the
chapter "Bearing dimensioning" in the technical information "General Orbital motors"
520L0232.
520L0407 Rev EL Dec 2013
63
OMV
Technical Information
Technical Data
Permissible shaft loads
for OMV
Mounting flange:
SAE-C
Shaft:
All shaft types
Prad. Prad.
lbf
14000
12000
N
60000
50000
0
- +
Pmax. =10000 N
=2248 lbf
10000
40000
8000
30000
6000
4000
20000
2000
10000
-80
-3
-60
-2.5
-40
-2
-1.5
-20
-1
-0.5
20
0.5
40
1.5
60
2.5
80
100
3.5
120 mm
4.5
in
151-1965.10
64
OMV
Technical Information
Function Diagrams
Function Diagrams
Q=200 l/min
[52.8 US gal/min]
150 l/min
[39.6 US gal/min]
160 l/min
[42.2 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
75 l/min
[19.8 US gal/min]
1200
10000
50 l/min
[13.2 US gal/min]
Nm
25 l/min
[6.6 US gal/min]
11000
Q=10 l/min
[2.6 US gal/min]
OMV 315
lbfin
1100
9000
p=240 bar
3480 psi
1000
8000
900
7000
800
N=50kW
700
6000
600
5000
4000
3000
200
1000
100
105 bar
1520 psi
85%
300
2000
140 bar
2030 psi
40hp
t =87%
10kW
10hp
N=5kW
5hp
400
50hp
20kW
20hp
500
40kW
30kW
30hp
200 bar
2900 psi
170 bar
2540 psi
70 bar
1020 psi
80%
p= 35 bar
t =70%
0
50
100
150
200
250
300
510 psi
350
400
450
500
550
600
min-1
(rpm)
650
151-870.10
12000
10000
Q=240 l/min
[63.4 US gal/min]
200 l/min
[52.8 US gal/min]
175 l/min
[46.2 US gal/min]
p=240 bar
3480 psi
1200
10hp
400
200
40kW
20hp
600
2000
50hp
40hp
800
200 bar
2900 psi
175 bar
2540 psi
N=50kW
30hp
8000
4000
150 l/min
[39.6 US gal/min]
1400
1000
6000
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
1600
75 l/min
[19.8 US gal/min]
14000
50 l/min
[13.2 US gal/min]
Nm
25 l/min
[6.6 US gal/min]
Q=10 l/min
[2.6 US gal/min]
OMV 400
lbfin
t =88%
140 bar
2030 psi
30kW
87%
5hp
N=5kW
80%
105 bar
1520 psi
20kW
85%
10kW
70 bar
1020 psi
p= 35 bar
t =70%
0
50
100
150
200
250
300
510 psi
350
400
450
500
550
600
min-1
(rpm)
151-871.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
65
OMV
Technical Information
Function Diagrams
Function Diagrams
12000
10000
Q=240 l/min
[63.4 US gal/min]
200 l/min
[52.8 US gal/min]
175 l/min
[46.2 US gal/min]
150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
1600
100 l/min
[26.4 US gal/min]
14000
75 l/min
[19.8 US gal/min]
1800
50 l/min
[13.2 US gal/min]
16000
25 l/min
[6.6 US gal/min]
Nm
Q=10 l/min
[2.6 US gal/min]
OMV 500
lbfin
p=240 bar
1200
8000
40hp
4000
2000
0
t =88%
400
87%
105 bar
1520 psi
30hp
10kW
85%
200
20kW
20hp
N=5kW
140 bar
2030 psi
40kW
30kW
800
600
200 bar
2900 psi
175 bar
2540 psi
50kW
60hp
50hp
1000
6000
3480 psi
N=60kW
1400
10hp
70 bar
1020 psi
5hp
p= 35 bar
80%
t =70%
510 psi
0
0
50
100
150
200
250
300
350
400
450
min-1
(rpm)
500
151-872.10
15000
12500
Q=240 l/min
[63.4 US gal/min]
200 l/min
[52.8 US gal/min]
175 l/min
[46.2 US gal/min]
150 l/min
[39.6 US gal/min]
125 l/min
[33.0 US gal/min]
100 l/min
[26.4 US gal/min]
2000
75 l/min
[19.8 US gal/min]
17500
50 l/min
[13.2 US gal/min]
Nm
25 l/min
[6.6 US gal/min]
lbfin
Q=10 l/min
[2.6 US gal/min]
OMV 630
1750
p=210 bar
N=60kW
1500
3050 psi
180 bar
2610 psi
50kW
30kW
40kW
1250
60hp
50hp
150 bar
2180 psi
40hp
120 bar
1740 psi
10000
1000
t =89%
7500
87%
N=5kW
500
2500
250
30hp
10kW
750
5000
20kW
90 bar
1300 psi
20hp
85%
80%
60 bar
870 psi
10hp
t =70%
p= 30 bar
5hp
440 psi
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
min-1
(rpm)
400
151-879.10
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
66
OMV
Technical Information
Function Diagrams
Function Diagrams
15000
12500
Q = 240 l/min
63.4 US gal/min
200 l/min
52.8 US gal/min
175 l/min
46.2 US gal/min
150 l/min
39.6 US gal/min
2000
125 l/min
33.0 US gal/min
17500
100 l/min
26.4 US gal/min
2250
75 l/min
19.8 US gal/min
20000
50 l/min
13.2 US gal/min
Nm
Q = 10 l/min
2.6 US gal/min
25 l/min
6.6 US gal/min
OMV 800
lbfin
p=180 bar
2610 psi
160 bar
2320 psi
1750
1500
130 bar
1890 psi
1250
10000
100 bar
1450 psi
1000
7500
5000
750
75 bar
1090 psi
500
2500
250
50 bar
730 psi
p=25bar
360 psi
25
50
75
100
125
150
175
200
225
250
275
300
min-1
(rpm)
P301 250
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
67
OMV
Technical Information
Shaft Version
Shaft Version
82 [3.23]
26 [1.02]
9.5 [0.374]
60
70.5 [2.776]
70.0 [2.756]
53.5 [2.106]
53.2 [2.094]
50.018 [1.9692]
50.002 [1.9686]
A
60 [2.36]
A: Cylindrical 50 mm shaft
D: Parallel key
A14 9 70
DIN 6885
Keyway deviates from
standard
A-A
M12
R0.5 [0.020]
5.5 [0.217]
4.5 [0.177]
14.000 [0.5512]
13.957 [0.5495]
79 [3.11]
82.2 [3.236]
81.8 [3.220]
60
min. 20 [0.78]
A-A
R0.5 [0.020]
62.92 [2.477]
62.66 [2.467]
57.15 [2.250]
57.10 [2.248]
60 [2.36]
A
13.1 [0.516]
10.9 [0.429]
12.73 [0.501]
12.70 [0.500]
57.5 [2.264]
56.9 [2.240]
99.2 [3.906]
98.8 [3.890]
min. 26 [1.02]
60
A-A
62.93 [2.478]
62.66 [2.467]
57.15 [2.250]
57.10 [2.248]
60 [2.36]
-20 UNF
R0.5 [0.020]
A
70.4 [2.772]
70.2 [2.763]
12.73 [0.501]
12.70 [0.500]
151-878.12
68
OMV
Technical Information
Shaft Version
Shaft Version
82[3.23]
26 [1.02]
9.5 [0.374]
45
M12
R0.5 [0.020]
A-A
53.975 [2.1250]
53.950 [2.1240]
60 [2.36]
A
58 [2.28]
56 [2.20]
82.2 [3.236]
81.8 [3.220]
min. 20 [0.78]
45
3/8 -16 UNC
R0.5 [0.020]
A-A
53.975 [2.1250]
53.950 [2.1240]
60 [2.36]
US Version
E: Involute splined shaft
for OMV with standard
mounting flange
ANS B92.1 - 1970 standard
Flat root side fit
Pitch 8/16
Teeth 16
Major dia. 2.125 in
Pressure angle 30
A
57 [2.24]
55 [2.17]
76.9 [3.028]
76.5 [3.011]
min. 26 [1.02]
30
-20 UNF
R0.5 [0.020]
A-A
53.972 [2.1249]
53.954 [2.1242]
60 [2.36]
US Version
F: Involute splined shaft
for OMV with mounting
flange SAE-C
ANS B92.1 - 1970 standard
Flat root side fit
Pitch 8/16
Teeth 16
Major dia. 2.125 in
Pressure angle 30
A
56.3 [2.217]
55.3 [2.177]
151-1918.10
69
OMV
Technical Information
Shaft Version
Shaft Version
23 [0.91]
32.25 [1.270]
32.05 [1.262]
78 [3.07]
M42x3 [0.12]
8 [0.31]
9 [0.35]
60 [2.36]
G: Tapered 60 mm shaft
(ISO/R775)
J: DIN 937
Across flats: 65 mm
Tightening torque:
750 50 Nm [6640 440 lbfin]
I: Taper 1:10
K: Parallel key
B16 10 32
DIN 6885
Keyway deviates from
standard
A-A
7 [0.28]
A
40.5 [1.594]
40.0 [1.575]
6 [0.24]
16.000 [0.6299]
15.957 [0.6282]
70 [2.76]
105 [4.13]
16 [0.63]
45
4.5 [0.177]
A-A
A
51.1 [2.012]
50.5 [1.988]
73.6 [2.898]
72.4 [2.850]
7.29 [0.287]*
7.19 [0.283]
4 [0.16]
57.20 [2.252]
57.10 [2.248]
60 [2.36]
M
A
14.308 [0.5633]
14.288 [0.5625]
100.4 [3.953]
99.6 [3.921]
151-1919.10
70
OMV
Technical Information
Technical Data
Port Thread Versions
B
45.5 [1.791]
45.0 [1.772]
F
min. 19 [0.75]
min. 18 [0.71]
A: G main ports
E: ISO 228/1 - G1
O-ring boss port
B: UN main ports
F: 1 5/16 - 12 UN
min. 13 [0.51]
min. 12 [0.47]
22.5 [0.886]
22.0 [0.866]
151-1978.10
C: G drain port
D: UNF drain port
9
G: ISO 228/1 - G1/4 H:
/16 - 18 UNF
O-ring boss port
71
OMV
Technical Information
Dimensions European Version
Dimensions
Standard Flange
160.000 [6.2992]
159.937 [6.2967]
146.4 [5.764]
145.0 [5.710]
L2
39.4 [1.551]
38.6 [1.520]
20 [0.79]
60 [2.36]
R1.6 [0.063]
33
40 [1.57]
11 [0.43]
2 [0.08]x45
L3
83 [3.27]
69 [2.72]
8 [0.31]
23.9 [0.941]
22.9 [0.902]
23.9 [0.941]
22.9 [0.902]
23.9 [0.941]
22.9 [0.902]
23.9 [0.941]
22.9 [0.902]
25.3 [0.996]
24.7 [0.972]
max. 76 [2.99]
14.0 [0.551]
13.0 [0.512]
14.0 [0.551]
13.0 [0.512]
L1
14.0 [0.551]
13.0 [0.512]
24.6 [0.969]
23.4 [0.921]
14.0 [0.551]
13.0 [0.512]
max. 77 [3.03]
max. 81 [3.19]
25.3 [0.996]
24.7 [0.972]
120 [4.72]
Type
OMV 315
OMV 400
OMV 500
OMV 630
OMV 800
72
Lmax
mm
[in]
215
[8.46]
222
[8.74]
230
[9.05]
240
[9.45]
254
[10.00]
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
160
[6.30]
167
[6.57]
175
[6.89]
186
[7.32]
200
[7.87]
Output shaft
Cyl. 50 mm
Splined 2.125 in
Tapered 60 mm
0]
89
[7. 58]
0.4 [7.8
0
2 99.6
1
L3
mm
[in]
82
[3.23]
105
[4.13]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M12; 12 mm [0.47 in] deep
E: G 1; 18 mm [0.71 in] deep
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
R16 [0.63]
18 [0.71]
max. 179 [7.05]
151-890.11
OMV
Technical Information
Dimensions US Version
Standard Flange
160.000 [6.2992]
159.937 [6.2967]
146.3 [5.760]
145.7 [5.736]
39.4 [1.551]
38.6 [1.520]
R1.6 [0.063]
20 [0.79]
L2
77 [3.03]
69 [2.72]
L1
24.6 [0.969]
23.4 [0.921]
max. 76 [2.99]
2 [0.08]x45
11 [0.43]
33
60 [2.36]
40 [1.57]
L3
90 [3.54]
88 [3.46]
25.3 [0.996]
24.7 [0.972]
25.3 [0.996]
24.7 [0.972]
max. 77 [3.03]
max. 83 [3.27]
120 [4.72]
Type
OMV 315
OMV 400
OMV 500
OMV 630
OMV 800
Lmax
mm
[in]
215
[8.46]
222
[8.74]
230
[9.05]
240
[9.45]
254
[10.00]
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
160
[6.30]
167
[6.57]
175
[6.89]
186
[7.32]
200
[7.87]
Output shaft
Cyl. 2.25 in
Splined 2.125 in
Tapered 2.25 in
0]
89
[7. 58]
0.4 [7.8
0
2 99.6
1
L3
mm
[in]
82
[3.23]
100
[3.94]
C: Drain connection
916 - 18 UNF;
13 mm [0.51 in] deep
O-ring boss port
D: 1 516 - 12 UN;
19 mm [0.75 in] deep
O-ring boss port
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
R16 [0.63]
18 [0.71]
max. 179 [7.05]
151-890.11.22
73
OMV
Technical Information
Dimensions US Version
127.00 [5.000]
126.95 [4.998]
85.5 [3.366]
13.8 [0.543]
13.2 [0.520]
21.0 [0.827]
19.6 [0.772]
16.1 [0.634]
13.7 [0.539]
L3
SAE-C Flange
L2
71.0 [2.795]
max. 76 [2.99]
24.0 [0.945]
L1
81.5 [3.209]
25 [0.98]
25 [0.98]
max. 77 [3.03]
max. 83 [3.27]
OMV 315
OMV 400
OMV 500
OMV 630
OMV 800
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
185
[7.28]
192
[7.56]
200
[7.87]
211
[8.31]
225
[8.86]
Output shaft
Cyl. 2.25 in
Splined 2.125 in
L3
mm
[in]
99
[3.90]
76.7
[3.02]
C: Drain connection
916 - 18 UNF;
13 mm [0.51 in] deep
O-ring boss port
D: 1 516 - 12 UN;
19 mm [0.75 in] deep
O-ring boss port
0]
39 8]
[6.
.3 [6.35
2
6
1 61.5
1
Type
Lmax
mm
[in]
239
[9.41]
246
[9.69]
254
[10.00]
265
[10.43]
279
[10.98]
R16 [0.63]
17.7 [0.697]
17.3 [0.681]
max. 147 [5.79]
151-1485.10
74
OMV
Technical Information
Dimensions European Version
180.000 [7.0866]
179.937 [7.0841]
Wheel
146.4 [5.764]
145.0 [5.710]
148.0 [5.827]
147.9 [5.823]
R1.2 [0.047]
8 [0.31]
22 [0.87]
10 [0.39]
R1.2 [0.047]
14.0 [0.551]
13.0 [0.512]
23.9 [0.941]
22.9 [0.902]
23.9 [0.941]
22.9 [0.902]
25.3 [0.996]
24.7 [0.972]
23.9 [0.941]
22.9 [0.902]
25.3 [0.996]
24.7 [0.972]
14.0 [0.551]
13.0 [0.512]
14.0 [0.551]
13.0 [0.512]
23.9 [0.941]
22.9 [0.902]
C
max. 76 [2.99]
L1
14.0 [0.551]
13.0 [0.512]
3.6[0.142]
24.6 [0.969]
23.4 [0.921]
L2
20 [0.79]
108 [4.25]
79 [3.11]
33
L3
2 [0.08]x45
83 [3.27]
max. 77 [3.03]
max. 81 [3.19]
85 [3.35]
120 [4.72]
max. 149 [5.87]
Type
OMVW
315
OMVW
400
OMVW
500
OMVW
630
OMVW
800
Lmax
mm
[in]
146
[5.75]
153
[6.02]
161
[6.34]
172
[6.77]
185
[7.28]
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
92
[3.62]
99
[3.90]
107
[4.21]
118
[4.65]
132
[5.20]
Output shaft
Cyl. 50 mm
Tapered 60 mm
1]
83 7]
[8.
.3 [8.80
4
2
2 23.7
2
L3
mm
[in]
82
[3.23]
105
[4.13]
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: M12; 12 mm [0.47 in] deep
E: G 1; 18 mm [0.71 in] deep
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
194.000 [7.6378]
193.928 [7.6350]
18 [0.71]
R16 [0.63]
151-899.11
75
OMV
Technical Information
Dimensions US Version
Wheel
180.000 [7.0866]
179.937 [7.0841]
146.3 [5.760]
145.7 [5.736]
148.0 [5.827]
147.9 [5.823]
R1.2 [0.047]
8 [0.31]
22 [0.87]
10 [0.39]
R1.2 [0.047]
L1
24.6 [0.969]
23.4 [0.921]
max. 76 [2.99]
L2
3.6 [0.142]
20 [0.79]
108 [4.25]
79 [3.11]
33
2 [0.08]x45
100.4 [3.953]
99.6 [3.921]
90 [3.54]
88 [3.46]
25.3 [0.996]
24.7 [0.972]
max. 77 [3.03]
25.3 [0.996]
24.7 [0.972]
max. 83 [3.27]
85 [3.35]
120 [4.72]
max. 149 [5.87]
1]
83 7]
[8.
.3 [8.80
4
2
2 23.7
2
Type
OMVW
315
OMVW
400
OMVW
500
OMVW
630
OMVW
800
76
Lmax
mm
[in]
147
[5.79]
154
[6.06]
162
[6.38]
172
[6.77]
187
[7.36]
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
92
[3.62]
99
[3.90]
107
[4.21]
118
[4.65]
132
[5.20]
C: Drain connection
916 - 18 UNF;
13 mm [0.51 in] deep
O-ring boss port
D: 1 516 - 12 UN;
19 mm [0.75 in] deep
O-ring boss port
*) The gearwheel set is 3.5 mm
[0.138 in] wider across the
rollers than the L1 dimensions
194.000 [7.6378]
193.928 [7.6350]
18 [0.71]
R16 [0.63]
151-899.11.22
OMV
Technical Information
Dimensions European Version
140.000 [5.5118]
139.937 [5.5093]
28 [1.10]
22 [0.87]
L1
8 [0.31]
23.9 [0.941]
22.9 [0.902]
max. 76 [2.99]
14.0 [0.551]
13.0 [0.512]
23.9 [0.941]
22.9 [0.902]
14.0 [0.551]
13.0 [0.512]
L2
82 [3.23]
23.9 [0.941]
22.9 [0.902]
max. 77 [3.03]
max. 81 [3.19]
23.9 [0.941]
22.9 [0.902]
25.3 [0.996]
24.7 [0.972]
14 [0.55]
14.0 [0.551]
13.0 [0.512]
L
24.6 [0.969]
23.4 [0.921]
14.0 [0.551]
13.0 [0.512] 20 [0.79]
R1 [0.04]
35 [1.38]
1 [0.04]x45
8 [0.31]
Short
25.3 [0.996]
24.7 [0.972]
58 [2.28]
120 [4.72]
max. 149 [5.87]
6 [0.24]
20
ax
m
5]
Type
OMVS
315
OMVS
400
OMVS
500
OMVS
630
OMVS
800
Lmax
mm
[in]
171
[6.73]
179
[7.05]
186
[7.32]
197
[7.76]
211
[8.31]
L1*
mm
[in]
22.0
[0.866]
29.0
[1.142]
37.0
[1.457]
47.5
[1.870]
61.5
[2.421]
L2
mm
[in]
117
[4.61]
124
[4.88]
132
[5.20]
143
[5.63]
157
[6.18]
C:
D:
E:
Drain connection
G 14; 12 mm [0.47 in] deep
M12; 12 mm [0.47 in] deep
G 1; 18 mm [0.71 in] deep
28 [1.10]
.1
[8
180
.4
179 [7.102]
.6 [7.0
71]
151-900.10
77
OMV
Technical Information
OMVS
Installing the OMVS
The cardan shaft of the OMVS motor acts as an output shaft. Because of the movement
of the shaft, no seal can be fitted at the shaft output.
Internal oil leakage from the motor will therefore flow into the attached component.
During start and operation it is important that the spline connection and the bearings
in the attached component receive oil and are adequately lubricated. To ensure that the
spline connection receives sufficient oil, a conical sealing ring between the shaft of the
attached component and the motor intermediate plate is recommended. This method is
used in the OMV.
The conical sealing ring (code. no. 633B9021) is supplied with the motor.
To ensure that oil runs to the bearings and other parts of the attached component, the
stop plate must have a hole in it (see fig. below).
We recommend an O-ring between motor and attached component. The O-ring
(code no. 151B1041) is supplied with the motor. If motor and attached component have
been separated, remember to refill before starting up. Fill the oil through the drain
connection.
2.35 [0.093]
2.25 [0.089]
A
F
max. 2 [0.08]
32.5 [1.280]
31.5 [1.240]
71 [2.80]
69 [2.72]
61.2 [2.409]
61.0 [2.402]
6 [0.24]
4 [0.16]
102 [4.02]
100 [3.94]
56.3 [2.217]
55.5 [2.165]
G
H
46.2 [1.819]
45.8 [1.803]
147.9 [5.823]
147.7 [5.815]
0.1
0.25 [0.010]
min. 60 [2.36]
K
K
140.063 [5.5143]
140.000 [5.5118]
min. 6 [0.24]
OMVS
Dimensions of the
Sttached Component
D
E
8.4 [0.331]
7.6 [0.299]
min. 5 [0.2]
9.5 [0.374]
8.5 [0.335]
53.3 [1.098]
52.7 [2.075]
20.5 [0.807]
19.5 [0.768]
28.7 [1.130]
26.3 [1.035]
76.3 [3.004]
75.7 [2.980]
151-815.10
A: O-ring: 140 3 mm
B: External drain channel
C: Drain connection
G 14; 12 mm [0.47 in] deep
D: Conical seal ring
78
E:
F:
G:
H:
OMV
Technical Information
OMVS
Internal Spline Data for
the Component to be
Attached
The attached component must have internal splines corresponding to the external
splines on the motor cardan shaft (see drawing below).
Material:
Case hardening steel with a tensile strength corresponding at least to 20 MoCr4
(900 N/mm2) or SAE 8620.
Hardening specification:
On the surface: HV = 750 50
0.7 0.2 mm under the surface: HV = 560
Internal involute spline data
Standard ANS B92.1-1970, class 5 (corrected m X = 1; m = 2.54)
Flat root side fit
Number of
z
teeth
Pitch
DP
Pressure angle
Pitch dia.
D
Major dia.
Dri
Form dia.
Dfi
(min.)
Minor dia.
Di
Space width
Lo
(circular)
Tooth thickness
So
(circular)
Fillet radius
Rmin.
Max.
measurement l
between pins*
Pin dia.
d
mm
in
16
16
10/20
30
40.640
45.2 +0.4
0
10/20
30
1.6
1.780 +0.016
0
44.6
1.756
38.5 +0 0.039
1.516 +0 0.0015
5.180
0.204
0.037
0.4
0.015
5.6 0.001
So
Dri
l
0.1116
32.47
Lo
0 .0015
2.835
+ 0.15
0
Rmin
1.278
Di
Dfi
D
151-816.10
+0.006
0
0.22 0.00004
Drain Connection on
OMVS or Attached
Component
A drain line ought to be used when pressure in the return line can exceed the
permissible pressure on the shaft seal of the attached component.
The drain line can be connected at two different points:
1) at the motor drain connection
2) at the drain connection of the attached component.
If a drain line is fitted to the attached component, it must be possible for oil to flow freely
between motor and attached component.
The drain line must be led to the tank in such a way that there is no risk of the motor and
attached component being drained of oil when at rest.
The maximum pressure in the drain line is limited by the attached component and its
shaft seal.
79
Code no
151B2050
151B2051
151B2052
151B2053
151B2054
151B2055
151B2056
151B2057
151B2058
151B2059
151B2060
151B2061
151B2062
151B2063
151B2064
151B2065
151B2066
151B2067
151B2080
151B2081
151B2082
151B2083
151B2084
151B2085
151B2150
151B2151
151B2152
151B2153
151B2154
151B2155
151B2156
151B2157
151B2158
151B2159
151B2160
151B2161
151B2162
151B2163
151B2164
151B2170
151B2171
151B2172
151B2173
151B2174
151B2183
151B2184
151B2185
151B2186
151B2187
151B2188
151B2189
80
Weight
kg
[lb]
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
22.0
48.5
22.5
49.6
23.0
50.7
24.0
52.9
25.0
55.1
26.0
57.3
31.8
70.1
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
31.8
70.1
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
31.8
70.1
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
32.4
71.4
33.2
73.2
34.1
75.2
35.5
78.3
37.1
81.8
30.0
66.2
30.8
67.9
31.7
69.9
33.1
73.0
34.7
76.5
30.0
66.2
30.8
67.9
Code no
151B2190
151B2191
151B2192
151B3000
151B3001
151B3002
151B3003
151B3004
151B3005
151B3006
151B3007
151B3008
151B3009
151B3010
151B3011
151B3012
151B3013
151B3014
151B3015
151B3016
151B3017
151B3018
151B3019
151B3020
151B3021
151B3022
151B3023
151B3024
151B3025
151B3026
151B3027
151B3028
151B3029
151B3030
151B3031
151B3032
151B3033
151B3034
151B3035
151B3036
151B3037
151B3038
151B3039
151B3040
151B3041
151B3100
151B3101
151B3102
151B3103
151B3104
151B3105
Weight
kg
[lb]
31.7
69.9
33.1
73.0
34.7
76.5
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
20.0
44.1
20.5
45.2
21.0
46.3
22.0
48.5
23.0
50.7
24.0
52.9
22.0
48.5
22.5
49.6
23.0
50.7
24.0
52.9
25.0
55.1
26.0
57.3
22.0
48.5
22.5
49.6
23.0
50.7
24.0
52.9
25.0
55.1
26.0
57.3
15.0
33.1
15.5
34.2
16.0
35.3
17.0
37.5
18.0
39.7
19.0
41.9
31.8
70.1
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
31.8
70.1
Code no
151B3106
151B3107
151B3108
151B3109
151B3110
151B3111
151B3112
151B3113
151B3114
151B3115
151B3116
151B3117
151B3118
151B3119
151B3120
151B3121
151B3122
151B3123
151B3124
151B3125
151B3126
151B3127
151B3128
151B3129
151B3200
151B3201
151B3202
151B3203
151B3204
151B3205
151B3207
151B3208
151B3209
151B3210
151B3211
151B3212
151B4000
151B4001
151B4002
151B4003
151B4004
151B4005
151B4007
151B4008
151B4009
151B4010
151B4011
151B4012
151B4021
151B4022
151B4023
Weight
kg
[lb]
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
31.8
70.1
32.6
71.9
33.5
73.9
34.9
76.9
36.5
80.5
32.4
71.4
33.2
73.2
34.1
75.2
35.5
78.3
37.1
81.8
32.4
71.4
33.2
73.2
34.1
75.2
35.5
78.3
37.1
81.8
22.7
50.1
23.5
51.8
24.4
53.8
25.6
56.4
27.7
61.1
31.0
68.3
31.5
69.4
32.0
70.5
33.0
72.8
34.0
75.0
35.0
77.2
31.0
68.3
31.5
69.4
32.0
70.5
33.0
72.8
34.0
75.0
35.0
77.2
24.5
54.0
25.0
55.1
25.5
56.2
26.5
58.4
27.5
60.6
28.5
62.8
24.5
54.0
25.0
55.1
25.5
56.2
26.5
58.4
27.5
60.6
28.5
62.8
24.5
54.0
25.0
55.1
25.5
56.2
Code no
151B4024
151B4025
151B4026
151B4028
151B4029
151B4030
151B4031
151B4032
151B4033
151F0500
151F0501
151F0502
151F0503
151F0504
151F0505
151F0506
151F0507
151F0508
151F0509
151F0510
151F0511
151F0512
151F0513
151F0514
151F0515
151F0516
151F0517
151F0518
151F0519
151F0520
151F0521
151F0522
151F0523
151F0524
151F0525
151F0526
151F0527
151F0528
151F0529
151F0530
151F0531
151F0532
151F0533
151F0534
151F0535
151F0536
151F0537
151F0538
151F0539
151F0540
151F0541
Weight
kg
[lb]
26.5
58.4
27.5
60.6
28.5
62.8
24.5
54.0
25.0
55.1
25.5
56.2
26.5
58.4
27.5
60.6
28.5
62.8
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
10.3
22.7
10.5
23.1
10.8
23.8
11.2
24.7
11.6
25.6
12.1
26.7
12.8
28.2
10.3
22.7
10.5
23.1
10.8
23.8
11.2
24.7
11.6
25.6
12.1
26.7
12.8
28.2
7.8
17.2
8.0
17.6
8.3
18.3
8.7
19.2
9.1
20.1
9.6
21.2
10.3
22.7
Code no
151F0542
151F0543
151F0544
151F0545
151F0546
151F0547
151F0548
151F0560
151F0561
151F0562
151F0563
151F0564
151F0565
151F0566
151F0605
151F0608
151F0609
151F0610
151F2200
151F2201
151F2202
151F2203
151F2204
151F2205
151F2206
151F2207
151F2208
151F2209
151F2210
151F2211
151F2212
151F2213
151F2214
151F2215
151F2216
151F2217
151F2218
151F2219
151F2220
151F2235
151F2236
151F2237
151F2238
151F2239
151F2240
151F2241
151F2242
151F2243
151F2244
151F2245
151F2246
Weight
kg
[lb]
10.2
22.5
10.4
22.9
10.7
23.6
11.1
24.5
11.5
25.4
12.0
26.5
12.7
28.0
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
11.1
24.5
13.6
30.0
13.6
30.0
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
10.3
22.7
10.5
23.1
10.8
23.8
11.2
24.7
11.6
25.6
12.1
26.7
12.8
28.2
10.3
22.7
10.5
23.1
10.8
23.8
11.2
24.7
11.6
25.6
Code no
151F2247
151F2248
151F2261
151F2262
151F2263
151F2264
151F2265
151F2300
151F2301
151F2302
151F2303
151F2304
151F2305
151F2306
151F2307
151F2308
151F2309
151F2310
151F2311
151F2312
151F2313
151F2314
151F2315
151F2316
151F2317
151F2318
151F2319
151F2320
151F2321
151F2322
151F2323
151F2324
151F2325
151F2326
151F2327
151F2328
151F2329
151F2330
151F2331
151F2332
151F2333
151F2334
151F2335
151F2336
151F2337
151F2338
151F2339
151F2345
151F2346
151F2347
151F2348
Weight
kg
[lb]
12.1
26.7
12.8
28.2
13.1
28.9
13.1
28.9
13.6
30.0
13.1
28.9
13.6
30.0
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
14.0
30.9
14.0
30.9
14.0
30.9
14.0
30.9
81
Code no
151F2349
151F2350
151F2351
151F2352
151F2353
151F2354
151F2355
151F2356
151F2357
151F2358
151F2359
151F2360
151F2361
151F2362
82
Weight
kg
[lb]
14.0
30.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
14.0
30.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
Code no
151F2363
151F2364
151F2365
151F2366
151F2367
151F2368
151F2369
151F2370
151F2371
151F2372
151F2373
151F2374
151F2375
151F2376
Weight
kg
[lb]
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
14.0
30.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
14.0
30.9
Code no
151F2395
151F2396
151F2397
151F2398
151F2399
151F2400
151F2401
151F2402
151F2403
151F2413
151F2414
151F2415
151F2416
151F2417
Weight
kg
[lb]
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
11.6
25.6
12.3
27.1
13.1
28.9
14.0
30.9
9.8
21.6
10.0
22.1
10.3
22.7
10.7
23.6
11.1
24.5
83
Products we oer:
Bent Axis Motors
Closed Circuit Axial Piston Pumps
and Motors
Displays
Electrohydraulic Power Steering
Electrohydraulics
Hydraulic Power Steering
Sauer-Danfoss is a global manufacturer and supplier of highquality hydraulic and electronic components. We specialize in
providing state-of-the-art technology and solutions that excel in
the harsh operating conditions of the mobile o-highway market.
Building on our extensive applications expertise, we work closely
with our customers to ensure exceptional performance for a broad
range of o-highway vehicles.
We help OEMs around the world speed up system development,
reduce costs and bring vehicles to market faster.
Sauer-Danfoss Your Strongest Partner in Mobile Hydraulics.
Integrated Systems
Joysticks and Control Handles
Microcontrollers and Software
Local address:
Comatrol
www.comatrol.com
Schwarzmller-Inverter
www.schwarzmueller-inverter.com
Turolla
www.turollaocg.com
Valmova
www.valmova.com
Hydro-Gear
www.hydro-gear.com
Sauer-Danfoss-Daikin
www.sauer-danfoss-daikin.com
520L0407 Rev EL Dec 2013
Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444
Fax:
+45 7488 4400
Sauer-Danfoss-Daikin LTD.
Shin-Osaka TERASAKI 3rd Bldg. 6F
1-5-28 Nishimiyahara, Yodogawa-ku
Osaka 532-0004, Japan
Phone: +81 6 6395 6066
Fax:
+81 6 6395 8585
www.sauer-danfoss.com