Escolar Documentos
Profissional Documentos
Cultura Documentos
Finishing Solutions:
Freedom to Finish Whatever You Start
Xerox
DocuColor
8080 and
Xerox
Finishing Solutions.
3
C75 J75 DC8080 CP 800/1000
Booklets
(Saddle-Stitched)
Booklet Maker Finisher with Optional C-Z Folder x x x
C.P. Bourg
x
Horizon ColorWorks PRO x
Horizon ColorWorks PRO Plus x
Plockmatic Pro 50/35 Booklet Maker x
Professional Finisher x
Xerox
SquareFold
Trimmer x x
Xerox
Perfect Binder x
Punched/
Lay Flats
Advanced Finisher x
Booklet Maker Finisher with Optional C-Z Folder x x x
GBC
AdvancedPunch x x x
GBC
eBinder II x
GBC FusionPunch
II x
Professional Finisher x
Standard Finisher with Optional C-Z Folder x x x
Standard Finisher Plus x
Slit/Cut/Crease Duplo DC-645 Offine Slitter/Cutter/Creaser x x x x
Duplo DC-745 Offine Slitter/Cutter/Creaser x x x x
Stack/Bypass Advanced Finisher x
Booklet Maker Finisher with Optional C-Z Folder x x x
High Capacity Stacker x x x
Professional Finisher x
Standard Finisher with Optional C-Z Folder x x x
Standard Finisher Plus x
DC8080 High Capacity Stacker/High Capacity Stacker/Stapler x
Stitched Sets Advanced Finisher x
Booklet Maker Finisher with Optional C-Z Folder x x x
C.P. Bourg BDFEx Booklet Maker x
Horizon ColorWorks x
Horizon ColorWorks PRO x
Horizon ColorWorks PRO Plus x
Professional Finisher x x x
Standard Finisher with Optional C-Z Folder x x x
Standard Finisher Plus x
DC8080 Stacker/Stapler x
Tape Bound Xerox
Tape Binder x
Efcient Finishing
Xerox
IntegratedPLUS
Finishing Solution for Booklets.
Adds integrity by allowing printed stacks to
easily be moved to the nisher without splitting
the stack.
In ofine mode, the attached nisher can run
at up to 15,000 sheets/hour.
4
Xerox
SquareFold
Trimmer
Attaches to the Optional Booklet
Maker Finisher
Enhance your professional nishing even
further with creased cover sheets, face
trimming and control of trim and square fold
thickness. Create crisp, sharp square spine
booklets that can be opened at and are easy
to handle, stack and store.
Booklet Maker Finisher with
Optional C-Z Folder
Xerox
SquareFold
Trimmer
Standard Finisher Plus
Includes Standard Finisher features with
Optional C-Z Folder plus DFA (Document
Finishing Architecture) required to support
additional nishing options.
Xerox
2-Knife Trimmer
Now you can create full-bleed booklets
on your Xerox
SquareFold
Trimmer Module. This inline solution produces
professional-looking, full-bleed, at booklets
on a relatively small footprint and is perfect
for a wide range of on-demand applications.
Features
Provides full-bleed trim for square fold booklets
made on the Booklet Maker/Finisher with
SquareFold (and Face) Trimmer Module
Inline solution to minimize operator
intervention and ensure booklet integrity
Operates from a unique interface
(no DFA required)
Produces booklets up to 25 sheets of either
20 lb bond or 80 gsm
Does not affect productivity and
functionality of the booklet maker or impact
communication between the booklet making
system and printer
Reliable, robust design
Trim dimensions can be adjusted quickly and
with precision
Asymmetric trimming option
Produces booklets up to 3/16" (5 mm) thickness
Benets
Gives a professional appearance by trimming
all three sides of the booklet (whether or not
the spine is squared up)
Easy to use digital display to set up jobs
Can store up to 10 job setups in memory
Designed for long production runs without the
need for operator intervention
Provides improved ergonomicsnished
booklets are delivered at waist height,
eliminating the need for bending to
retrieve output
Standard Finisher Plus
Xerox
2-Knife Trimmer
7
Xerox
2-Knife Trimmer
GBC
FusionPunch
II
The GBC FusionPunch II prepares documents
for coil binding by punching and stacking a
wide range of stocks with the speed, quality
and reliability you need for high-volume
production. This inline punch solution
features an outstanding paper handling
system that maximizes uptime and reduces
skewing with remarkably consistent
registration. It even handles challenging
jobs with intermixed stocks, index tabs and
lighter stocks that have traditionally been
difcult to nish.
Benets
Heavy-duty design ensures a reliable high-
quality punch each and every time.
Over a dozen dies availablewhich can be
changed in seconds without toolsensures
support of all commonly-used coil bindings.
Offset stacking dramatically reduces nishing
time by fully preparing each printed set for
immediate binding.
GBC
FusionPunch
II GBC
AdvancedPunch
GBC AdvancedPunch
The new GBC AdvancedPunch lets you
create professionally bound documents
in-house by combining printing, punching
and collating into one convenient step.
Select from various interchangeable die sets
for popular binding styles without manual
punching, thereby increasing productivity and
lowering costs while producing professional
looking documents.
Features
Enables inline printing, punching and collating
for ready to bind ofine applications.
AdvancedPunch module is fully integrated with
the printer.
Select from various interchangeable (optional)
die sets for popular binding styles; no need for
ofine manual punching.
Three additional die sets can be stored within
the AdvancedPunch module.
User-friendly replacement of die sets without
need for levers or tools.
AdvancedPunch module uses a unique waste
container sensor design and includes a large
waste container to collect scrap punches.
Supports punching of pre-cut tab stock to
create punched applications such as manuals,
guides or planners.
Benets
Maximize productivity and lower overall
cost of production; reduce setup time and
cost associated with manual nishing by
providing ready-to-bind documents at the
touch of a button.
Add style and versatility to bound documents;
up to seven common punching styles produce
ready-to-bind documents at rated speeds.
Easy to create professionally bound
documents in-house for commonly used
ofine binding styles.
Designed for walk-up users or for production
professionals, so users can initiate punch
jobs right from their desktop or from the
print controllers.
A Professional Bind
8
GBC
eBinder II
The GBC eBinder II is an automated,
mechanical binding system that nishes
8.5" x 11" and A4 document sizes with a single
binding element that adjusts automatically
to every book thickness. GBC eBinder II is fully
automated and creates high-quality,
lay at books quickly and easily inline. The
innovative one-size-ts all GBC Ellipse
element produces elegant lay at and
360-degree wraparound books with a fresh,
modern appearance. The elliptical prole of
the element creates compact documents for
improved shipping, storing and stacking.
Benets
Stack, punch and bind functionality contained
all in one inline device.
Durable polyester bind element self-adjusts
for one-size-ts-all ease and productivity
(available in black, navy blue, white and
frost/clear).
Small footprint, at approximately 2 feet wide.
Produces full 360-degree lay at bookletsup
to 102 sheetswith a high-quality look.
Can bypass sheets to downstream, third-party
nishing devices.
Xerox
Tape Binder
For easily creating professional-looking
documents, the Xerox
Tape Binder
conguration for added productivity.
Benets
Excellent for documents that exceed the
stapling limit.
Adds an aesthetic, professional nish
for bound books and manuals from
15 125 sheets.
Economical solution for documents with a short
life expectancy or designed specically for
internal use, such as routine reports,
reference data and directories.
Provides tamper-resistance, helping ensure
documents remain whole.
Set-level job recovery maintains job integrity
in the event of a jam.
Can run in Binding Mode or Bypass
Mode, which passes sheets to third-
party nishing devices.
GBC
eBinder II Xerox
Tape Binder
9
Xerox
Perfect Binder
The Xerox
Perfect Binder
Benets
Grow your Business
Say yes to more applications
Use mixed media
Simple job setup and fast turnaround time
Produce More Great Work
High-value image quality
Personalize covers and content
Use Clear Dry Ink to add impact to static and
personalized content
Reduce Your Costs
Full asset utilization
Use inline with the Xerox
Color 800/1000
Presses
Use ofine/manual for other book blocks
and covers
10
Plockmatic Pro 50/35
Booklet Maker
To keep your booklet making jobs in-house,
choose the Plockmatic Pro 50/35 Booklet
Maker which offers an effective and
productive booklet making solution. Designed
to support production run lengths, it can
fold 1 to 50 sheets (35 with Pro 35) or saddle
stitch and fold 2 to 50 sheets (35 with Pro 35)
for booklets up to 200 pages (140 with Pro
35). The Plockmatic Pro 50/35 Booklet Maker
system is a modular solution that consists of a
booklet maker, face trimmer, square fold unit
and cover feeder. The optional square fold
module creates a neat square edged spine
that is a perfect complement to any booklet.
The RCT Rotate Crease Trimmer enables
three sided trimming of full bleed saddle
stitched booklets. The Cover Feeder makes it
possible to add pre-printed color covers (140 lb
index/250 gsm).
Benets
Can easily produce a variety of booklets in one
continuous operation.
Designed to support production run lengths.
Optional square fold module attens the
saddle stitch for a squared, perfect bind.
Optional cover feeder module to add pre-
printed front and back color covers to create
durable eye-catching catalogs, user manuals,
course books, etc.
Optional trimmer module trims the white
gripping edges from each sheet, enabling full
bleed applications.
Flexibility due to ofine capability.
Duplo Slitter/Cutter/Creaser (SCC)
Nearline Booklet Maker
The Duplo Slitter/Cutter/Creaser (SCC) is an
optional unit designed specically for the color
and monochrome user. It is able to slit, cut and
crease in a single pass, making the nishing of
digital color and monochrome books simpler
and faster than ever.
The SCC is designed principally for the digital
color market and takes care of two common
issues associated with digital output. First,
the SCC module side-slits and trims the head
and foot of each sheet providing an accurate
fullbleed trim, which is registered by a CCD
camera to the image, rather than to the
physical dimensions of the sheet. Second,
the SCC module can crease the cover and
innermost sheets of the booklet or all the
sheets in the booklet so that image cracking
on the foldline is minimized.
The units PC Touch Screen enables access to
the PC Controller software, which makes it very
easy for an operator to program and review
or modify jobs during the SCC operation. The
software ensures the machine is programmed
within specication. Job layouts can be veried
to run with an option to select alternative
formats or paper size if needed.
Benets
Reduces production time.
Reduces waste and errors caused by using
separate unconnected nishing processes.
Saves cost of additional equipment.
One operator performs the job of two people.
Intelligent and intuitive, allowing operation by
unskilled staff.
Booklets made easy.
Plockmatic Pro 30 Booklet Maker Duplo SCC Nearline Booklet Maker
11
C.P. Bourg
BDFEx
The C.P. Bourg BDFEx is a fully automated
signature booklet maker that produces high
quality saddle stitched booklets inline. The new
Square Edge (SQEDG) Module option further
expands its capability by offering an optional
square edge spine.
The BDFEx can top or corner stitch from 2 to
50 sheets and it can also be used in the fold
only mode.
The BDFEx is touchscreen controlled and
requires absolutely no tools for changeover
in sheet size or application. A complete paper
path sensing system ensures that document
production is monitored throughout each
step of the process. Includes an easy load,
self-threading wire stitching cassette that
automatically produces over 50,000 stitches
and even adjusts for various book thicknesses.
Other features include a dual roller folder
that ensures sharp, square, accurate folds and
automatic sizing that utilizes a self-sharpening
two blade trimmer.
Benets
New User interface allows up to 500 stored
jobs with full alphanumeric names.
Increases speed and efciency for digital print-
ing with inline nishing.
Adjust nishing settings as job runs through
new UI.
Usage of 2 or 4 stitch heads.
For full-bleed (three-sided trimming), the
Bleed Crease Module (BCMEx) is offered
as an optional device. The BCMEx can
bleed trim independently from 5/32" to 1"
(4 to 25.4 mm) and crease the cover only
or crease cover and body pages for a better
nished booklet. The BCMEx also has a
large capacity waste bin to collect
bleed trimmings.
Optional Xerox
IntegratedPLUS Finishing
Solution for Booklets
C.P. Bourg
BDFEx
Watkiss PowerSquare 224
A complete book making system, the
Watkiss PowerSquare 224 combines the
four processes required to produce quality
manuals: stitching, folding, spine forming
and trimming. This nisher produces
SquareBack books up to 10.4 mm
(224 pages/56 sheets at 70 gsm). It features
fully automatic settings and includes a six-
position single stitch head that allows for a
variable stitch leg length to accommodate
for varying book thicknesses. A cost-effective
alternative to perfect binding or tape
binding, the Watkiss PowerSquare 224 will
automatically adjust itself based on sheet
count to provide the most accurate stitch
length and fold depthon the yto easily
accommodate a variety of jobs.
Benets
SquareBack books have the polished
appearance of a perfect bind but with the
security of a stitched spine.
The PowerSquares six-position single
stitch head and clincher allows for
multiple-up layouts for smaller pocket-sized
booklets, saving you money in print.
Space-saving ergonomic design has very
small footprint.
Accommodates the full range of stock
weights and sizes available on Xerox Nuvera
Production and Perfecting Production
Systems.
Automatic sheet rotation keeps up with the
speed of the printer.
Optional trimmer for full-bleed.
Watkiss PowerSquare 224
12
Horizon ColorWorks
and
ColorWorks PRO
Now, just two all-in-one document nishers
complete color booklets with professional
results inline on the DocuColor
8080. The
ColorWorks inline document nisher supports
booklet making, stacking, corner/top stitching
and face trimming. The ColorWorks PRO
inline document nisher performs booklet
making, head and foot bleed trimming, up to
four scores per sheet, face trimming, covers
feeding, corner/top stitching and stacking.
Equipment and service price adjustments have
made the ColorWorks and ColorWorks PRO
a more competitive booklet making offering
than the previous ColorWorks family of
document nishers.
Horizon ColorWorks PRO Plus
Horizon ColorWorks PRO Plus is the all-in-
one next-generation document nisher
designed for operation inline to Xerox
Color 800/1000 Presses. The compact
multifunctional ColorWorks performs
booklet making, creasing, bleed trimming,
folding, stitching and stacking, making it a
nearly full-service bindery in a box.
Professional-quality document production
is managed through an icon-based color
touchscreen for quick, easy and accurate set-
ups. Edge-to-edge full color bleeds are made
possible with rotary head and foot trimming
of posters, brochures or booklets. And inline
creasing helps improve fold quality and avoid
image-cracking induced by cross-grain stock.
The compact ColorWorks system performs
corner, side and center-stapling functions,
with booklet folding and face trimming.
Finished booklets are delivered to an
integrated motorized vertical stacker for
convenience and space efciency.
Benets
TouchscreenThe simple color touchscreen
reduces operator errors and provides end-to-
end automation for quick set-ups without the
need for specialized operating skills.
StitchingProfessional quality stitching
with customer replaceable staple cartridge
(5,000 staples) and adjustable stitch distance.
Face TrimmingHeavy-duty trim knife cuts
fore-edge of booklet to produce professional
quality booklets.
Feed DrawerCan be used to feed pre-
collated sheets in ofine mode; it cannot
be used to insert pre-printed covers into the
print stream.
FoldingTight, accurate half-folding
is provided with operator accessible skew
adjustment.
Catch TrayThe catch tray receives staple
only or at-sheet documents.
Bleed TrimmingAuto-set rotary trimmers
remove excess paper from head and foot of
sheets for edge-to-edge color. Trimmings are
automatically removed to a high-capacity
waste bin behind the nisher.
Channel ScoringChannel scored sheets
fold without cracking image and create
atter folded booklets. Multiple scores can
be applied to prepare perfect bind covers or
to pre-score tri-fold leaets (tri-folding must
be performed ofine).
Cover FeederThe feed drawer can be used
for both cover insertion and ofine feeding of
pre-collated sets.
Horizon ColorWorks
13
Duplo Ofine Ultra 145A UV
Coating System 145A/205A
The Duplo Ofine Ultra 145A UV Coating
System is a nishing machine that applies an
ultraviolet (UV) coating nish to documents,
enhancing image quality, application durability
and overall look and feel. High quality, cost-
effective ultraviolet coating on documents
printed on Xerox
IntegratedPLUS
Finishing Solution for Booklets
Benecial as it is, automated nishing used
to tie up valuable assets on your shop oor.
Prepress and postpress processes required
highly skilled personnel to set up les to match
nishing devices at the front end and then
later to set up the actual nishing device to
run the job. And you were forced to dedicate
a nishing device to just one printer. If you
werent running booklets, for example, that
booklet maker sat idle. Xerox
IntegratedPLUS
Finishing Solution for Booklets changes all that.
Now prepress setup and nishing setup can be
automated, whether or not the nishing device
is inline with a printer or ofine. You get the
best of both nishing worldsthe conve-
nience of inline with the exibility of ofine,
plus unsurpassed labor savings.
Xerox
IntegratedPLUS Solution gives you the
opportunity to optimize your investment and
your operation by leveraging automation.
Benets
Eliminates the need for highly skilled prepress
operators to prepare les according to nisher
specications.
Eliminates manual programming at the
nishing device and reduces the risk of error
because the necessary parameters (e.g., page
imposition, page ordering and trimming) are
set automatically when a job enters your
workow.
Extends the convenience and cost
effectiveness of automated nishing to
multiple printers (including Xerox
and
non-Xerox
SquareFold
Trimmer
Main Stack Capacity 3,500
2,250 (HCSS)
5,000 3,000 3,000
Minimum
Stack Size
7.2" x 7.2" (182 mm x 182 mm) 8" x 7.2" (203 mm x 182 mm) 5.5" x 7.2" (140 mm x 182 mm) 5.5" x 7.2" (140 mm x 182 mm)
Maximum
Stack Size
12.6" x 19.2" (320 mm x 488 mm) 12" x 19.2" (305 mm x 488 mm) 13" x 19" (330 mm x 483 mm) 13" x 19" (330 mm x 483 mm)
Minimum
Booklet Size
N/A N/A N/A 8.5 x 11"/A4
Maximum
Booklet Size
N/A N/A N/A 13" x 18" (330 mm x 457 mm)
Folding N N N N
Hole Punch N N Y Y
Bypass/Feed Third Party Devices Y Y N N
Fed By/Requires N/A N/A N/A N/A
Finished Book
Size Minimum
N/A N/A N/A N/A
Finished Book
Size Maximum
N/A N/A N/A N/A
Specications for Xerox
Entry Production Color
19
Device Standard Finisher Booklet Maker Finisher Xerox
SquareFold
SquareFold
Trimmer
Y N/A
Main Stack Capacity 3,000 2,000 N/A 2,000
Minimum
Stack Size
4.6" x 6.5" (182 mm x 257 mm) 4.6" x 6.5" (182 mm x 257 mm) N/A 4.6" x 6.5" (182 mm x 257 mm)
Maximum
Stack Size
13" x 19.2" (330 mm x 488 mm) 13" x 19.2" (330 mm x 488 mm) N/A 13" x 19.2" (330 mm x 488 mm)
Minimum
Booklet Size
N/A 8.5" x 5.5" (216 mm x 140 mm) 8.5" x 5.5" (216 mm x 140 mm) N/A
Maximum
Booklet Size
N/A 13" x 9" (330 mm x 229 mm) 13" x 9" (330 mm x 229 mm) N/A
Folding Optional Optional N Optional
Hole Punch Y Y N Y
Bypass/Feed Third Party Devices N N N Y
Fed By/Requires N/A N/A Booklet Maker Finisher N/A
Finished Book
Size Minimum
N/A N/A N/A N/A
Finished Book
Size Maximum
N/A N/A N/A N/A
20
Specications for Xerox
Dual-Mode Sheet
Feeder (BSFEx)
GBC Fusion Punch II GBC AdvancedPunch
Mode
Inline
Inline w/bypass or Nearline Inline w/bypass Inline w/ bypass
Dimensions
(W x D x H) Inches
59 x 27.6 x 47.2
48 x 36 x 52 54 x 32 x 46 12 x 28.5 x 38.5
Dimensions (W x D x H) Millimeters
1,500 x 700 x 1,200
1,229 x 913 x 1,316 1,370 x 810 x 1,170 305 x 724 x 978
Weight
518 lb (235 kg)
992 lb (450 kg) 620 lb (281 kg) 154 lb (70 kg)
Stock Weight Range
64 300 gsm
60 350 gsm 60 250 gsm 64 300 gsm
Type of Finish
Full-bleed Signature Booklets
Dual Mode Feeder Punched Sheets Punched Sheets
Minimum Stock Size Top Tray
N/A
N/A N/A N/A
Maximum Stock Size Top Tray
N/A
N/A N/A N/A
Top Tray Capacity
N/A
N/A N/A N/A
Minimum Stapled Sheets/Sheet Size
N/A
N/A N/A N/A
Maximum Stapled Sheets/Sheet Size
N/A
N/A N/A N/A
Maximum Number of Staples
N/A
N/A N/A N/A
Approved On
Color C75 and J75
Color 800/1000 Press Inline
All Systems Nearlnie
DC8080 C75, J75 and
Color 800/1000 Presses
Stitch or Staple
N/A
N/A NN N
Booklet Making
Y
N N N
Maximum
Sheets per Book
25
N/A N/A N/A
Face Trim
N
N/A N/A N/A
Main Stack Capacity
N/A
N/A 2500 Continuous
Minimum
Stack Size
N/A
N/A 7 x 10"
178 x 254 mm
8.5 x 11"
210 x 297 mm
Long Edge Feed
11" side only
Maximum
Stack Size
N/A
N/A 11 x 17"
279 x 432 mm/A3
8.5 x 11"
210 x 297 mm
Long Edge Feed
11" side only
Minimum
Booklet Size
5.75" x 5.5"
(146 mm x 140 mm) Face trim
N/A N/A N/A
Maximum
Booklet Size
12.88" x 9"
(327 x 229 mm) Face trim
N/A N/A N/A
Folding
N
N/A N N
Hole Punch
N
N/A Y (Multiple dies available) Y (Multiple dies available)
Bypass/Feed Third Party Devices
N
Y Y (Bypass Stacker required) Y
Fed By/Requires
Xerox
SquareFold
Trimmer
Stacker Stacker Interface Module
Finished Book
Size Minimum
N/A
N/A N/A N/A
Finished Book
Size Maximum
N/A
N/A N/A N/A
Device GBC eBinder II Xerox