*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings. *#67705646# This will clear the LCD display(operator logo). *#0000# To view software version. *#2820# Bluetooth device address. *#746025625# Sim clock allowed status. #pw+1234567890+1# Shows if sim have restrictions. *#92702689# takes you to a secret menu where you may find some of the information below: 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repair if found (0000) 5. Shows life timer of phone (time passes since last start) *#3370# Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though. *#3370* (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network. *#4720# Half Rate Codec activation. *#4720* Half Rate Codec deactivation. The phone will automatically restart If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538# Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345 Press *#3925538# to delete the contents and code of wallet. Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \ *#7328748263373738# resets security code. Default security code is 12345 Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold 0 on the main screen to open wap browser.
How To Format Nokia N72, N73, N81, N95, NSeries Mobile Phones
Most of the Indian mobile phone users have Nokia phones and main reason of Nokia phone popularity in India is easy to use phone, feature richness & lower cost. Some of most popular Nokia Phone models are N72, N73, N81, N95 and NSeries.
If you have turned on your Bluetooth on your Nokia mobile phone and forgot to turn off then chances are high that your phone may get infected with virus and the only solution to this is formatting your mobile phone. We have seen many users asking on forum how to format Nokia Phone.
Well the procedure of formatting your Nokia phone is pretty easy. Here is Guide on How to Format Nokia N72, N73, N81, N95, NSeries Phones. How to Format Nokia N72, N73, N81, N95, NSeries Mobile Phones.
Method 1: Three Finger Reset for Nokia Phone
1. Switch off your Nokia phone.
2. Hold down the following three keys, Green (call answer button) * Key, and Number 3? key.
3. While holding these buttons, press the power button and switch on the phone.
4. Wait for message Formatting to appear on the screen and release all keys once you see that message. Method 2: Hard Format of Nokia Mobile Phone
1. Switch off your Nokia phone
2. Now Press following key sequence *#7370#
3. Enter Default lock code is 12345.
4. While holding these buttons, press the power button and switch on the phone.
5. Wait for message Formatting to appear on the screen and release all keys once you see that message. Method 3: Soft Reset of Nokia Mobile Phone
1. Switch off your Nokia phone
2. Now Press following key sequence *#7780#
3. Enter Default lock code is 12345.
4. While holding these buttons, press the power button and switch on the phone.
5. Wait for message Formatting to appear on the screen and release all keys once you see that message.
Please Note: The Above Nokia Phone Formatting method will erase all your Phone data. So do backup before proceeding for Formatting
1.Formatting Nokia N72 1. Switch off your Nokia phone. 2. Hold down the following three keys, Green (call answer button) * Key, and Number 3? key. 3. While holding these buttons, press the power button and switch on the phone. 4. Wait for message Formatting to appear on the screen and release all keys once you see that message.
2.Hard Format of Nokia Mobile Phone 1. Switch off your Nokia phone 2. Now Press following key sequence *#7370# 3. Enter Default lock code is 12345. 4. While holding these buttons, press the power button and switch on the phone. 5. Wait for message Formatting to appear on the screen and release all keys once you see that message 3.Formating Code For 3110 c 1) Switch off your Mobile phone. 2) Remove the Memory Card. 3)Switch on The Mobile. 4) press *#7780# on your mobile 5) phone will ask you Security Code 6) Enter security code by Default 12345 if You had not Change 7) then Mobile will Restart and VIRUS will Gone before Inserting memory card after formatting Please insure that there is no VIRUS in Card 9) 1 Suggestion for All of PLEASE DONT INSTALL ANY NOKIA NTH THEMES 4.Nokia-1600's cheat SCREEN DISTORTION BUG: If you own a Nokia 1600 you should try this just enter *#5512# and see. How do you like this? screen divided in two parts one vertical and one horizontal! This is not all, you can make your whole screen upside down! There are more *#5511# , *#5512# , *#5513# 5.Secret Codes for Nokia 1) *#06# For checking IMEI(international Mobile Equipment Identity) 2) *#7780# Reset to factory settings 3) *#0000# To view software version 4) *#2820# Bluetooth device address 5) *#746025625# Sim clock allowed status 6) #pw+1234567890+1# Shows if ur sim as any restrictions 6.NOKIA Mobile Cheats
1 Imagine ur cell battery is very low, u r expecting an important call and u don't have a charger. Nokia instrument comes with a reserve battery. To activate, key is "*3370#" Ur cell will restart with this reserve and ur instrument will show a 50% incerase in battery. This reserve will get charged when u charge ur cell next time. *3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the best sound quality but talk time is reduced by approx. 5% #3370# Deactivate Enhanced Full Rate Codec( EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time *#4720# Deactivate Half Rate Codec 2 *#0000# Displays your phones software version, 1st Line :S oftware Version, 2nd Line : Software Release Date, 3rd Line : Compression Type 3 *#9999# Phones software v ersion if *#0000# does not work 4 *#06# For checking the International Mobile Equipment Identity (IMEI Number) 5 #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 6 #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 7 #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) 8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button to obtain the "p,w" and "+" symbols) 9 *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone) 10 *#21# Allows you to check the number that "All Calls" are diverted To 11 *#2640# Displays security code in use
12 *#30# Lets you see the private number 13 *#43# Allows you to check the "Call Waiting" status of your phone. 14 *#61# Allows you to check the number that "On No Reply" calls are diverted to 15 *#62# Allows you to check the number that "Divert If Unrea chable(no service)" calls are diverted to 16 *#67# Allows you to check the number that "On Busy Calls" are diverted to 17 *#67705646#R emoves operator logo on 3310 & 3330 18 *#73# Reset phone timers and game scores 19 *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible 20 *#7760# Manufactures code 21 *#7780# Restore factory settings 22 *#8110# Software version for the nokia 8110 23 *#92702689# (to rember *#WAR0ANTY#) Displays - 1.Serial Number, 2.Date Made 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode -you need to switch your phone off then on again 24 *#94870345123456789# Deactivate the PWM-Mem 25 **21*number# Turn on "All Calls" diverting to the phone number entered 26 **61*number# Turn on "No Reply" diverting to the phone number entered 27 **67*number# Turn on "On Busy" diverting to the phone number entered Each command is prefixed with either one or two * or # characters as follows: ** Register and Activate * Activate ## De-Register (and Deactivate) # Deactivate *# Check Status Call button Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678). Command Description Command String Security Change call barring code **03*OldCode*NewCode*NewCode# Change call barring code **03*330*OldCode*NewCode*NewCode# Change PIN code **04*OldPIN*NewPIN*NewPIN# Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2# Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN# Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2# Display IMEI *#06# Call Forwarding (Diversions) De-register all call diversions ##002# Set all configured call diversions to number and activate **004*number# De-register all configured call diversions (no answer, not reachable, busy) ##004# Unconditionally divert all calls to number and activate **21*number# Activate unconditionally divert all calls *21# De-register unconditionally divert all calls ##21# Deactivate unconditionally divert all calls #21# Check status of unconditionally divert all calls *#21# Divert on no answer to number and activate **61*number# Activate divert on no answer *61# De-register divert on no answer ##61# Deactivate divert on no answer #61# Check status of divert on no answer *#61# Divert on not reachable to number and activate **62*number# Activate divert on not reachable *62# De-register divert on not reachable ##62# Deactivate divert on not reachable #62# Check status of divert on not reachable *#62# Divert on busy to number and activate /td> **67*number#< Activate divert on busy *67# De-register divert on busy ##67# Deactivate divert on busy #67# Check status of divert on busy *#67# Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds# (Service numbers, see below) Call barring Activate barr all outgoing calls (see Security to set code) **33*code# Deactivate barr all outgoing calls #33*code# Check status of barr all outgoing calls *#33# Activate barr all calls **330*code# Deactivate barr all calls #330*code# Check status of barr all calls /td> *#330*code#< Activate barr all outgoing international calls **331*code# Deactivate barr all outgoing international calls #331*code# Check status of barr all outgoing international calls *#331# Activate barr all outgoing international calls except to home country **332*code# Deactivate barr all outgoing international calls except to home country #332*code# Check status of barr all outgoing international calls except to home country *#332# Activate barr all outgoing calls **333*code# Deactivate barr all outgoing calls #333*code# Check status of barr all outgoing calls *#333# Activate barr all incoming calls **35*code# Deactivate barr all incoming calls #35*code# Check status of barr all incoming calls *#35# Activate barr all incoming calls when roaming **351*code# Deactivate barr all incoming calls when roaming #351*code# Check status of barr all incoming calls when roaming *#351# Activate barr all incoming calls **353*code# Deactivate barr all incoming calls #353*code# Check status of barr all incoming calls *#353# Call waiting Activate call waiting *43*# Deactivate call waiting #43## Check status of call waiting *#43# Calling Line Identification The following only works if CLIP and CLIR are enabled (ask your service provider) CLIP: Presentation of the number of the incoming call Activate CLIP **30# Deactivate CLIP ##30# Check status of CLIP *#30# CLIR: Presentation of one's own number to the to the called party Activate CLIR **31# Activate CLIR for the actual call *31#number Deactivate CLIR ##31# Deactivate CLIR for the actual call #31#number Check status of CLIR *#31# COLP: Presentation of the actual number reached (if number called was diverted to another number Activate COLP *76# Deactivate COLP #76# Check status of COLP *#76# COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone) Activate COLR *77# Deactivate COLR #77# Check status of COLR *#77# 7.All Tips / Tutorials / Tricks / Mods / HACKS for S60v3 Cellphone here Tip 1 : Do u know how to use the edit button (abc or pencil button)? Heres how... In the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. Pretty good for placing song names in ngages
Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. To format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*> and Call (Send) buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. This method ONLY works on 6600, and need not enter the sec code. BUT sec code would be reset to default 12345.
Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.
Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Type *#0000# to view which firmware version you are running
Tip 4a: Set the screen saver to a short time out period to prolong battery life. Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.
Tip 10: Operator logos Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is on Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.
Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians) 1 - turn image anticlockwise 3 - turn image clockwise * - toggle on/off of full screen 5 - zoom in 0 - zoom out
#15 u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. However u need to make a new directory. Fexplorer wun let u copy that folder together. Well seleQ can mark files to copy but it really takes time!
#16: A soft and Hard reset A Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.
How to copy & paste text in your Nokia 3650: Press and hold the pencil key and select your text using the scroll key. Left function key will change to 'Copy'. Press it to copy the selected text to clipboard. You can paste the clipboard contents the same way: press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications. If a program hangs and you can't shut it down, select the application in the application switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off: Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off. (This also effects the sound of Java games and apps).
To change background image go to: Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image". The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette? This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling: Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact: Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once: Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.
Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My Caller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader. E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder. Menu > Extra's > Recorder > Options > Record sound clip. Note: short beeps are audible during call registration. But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input). Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images: 1 = zoom in, 0 = zoom out, press and hold to return to the normal view. 2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling. To add a voice tag to a phone number, open a contact card and scroll to the phone number and select: Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode): Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. Press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location. 123 456 789
In standby mode, 45# + dials the number on your sim in memory slot 45. 50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up the whole 3650 system. It was never intended to work on the 3650, only on the 7650.