The Plato 220 is a high accuracy clock source suitable for use as a frequency or
time reference in a variety of network synchronization applications. The product
synchronizes an ultra-stable local oscillator to GPS and/or an IEEE1588/SyncE master which provides Stratum-1 performance with very high dependability due to reference source diversity. Other capabilities include the ability to function as an IEEE1588v2 Grandmaster, an internal expansion card port and an external expansion interface.
Plato 220 Applications: Primary reference for E1, T1 and celular networks Frequency reference for broadcasting and transmission Frequency and time reference for laboratories IEEE1588v2/NTP/SyncE Grandmaster for Ethernet/IP based synchronisation Plato 220 Standard Features: Ultra-high stability, 1 part in 10 10 OCXO oscillator Sync form multiple references, GPS & IEEE1588/SyncE Two 100/120 balanced E1/2048kHz outputs Two 75 unbalanced E1/2048kHz outputs One fully confgurable DDS sine wave output Two confgurable PPS outputs Two confgurable alarm relay outputs One 10/100 base-T Ethernet One SFP for optical/copper Gigabit Ethernet IEEE1588v2 Grandmaster or slave function Confguration via RS232/USB/SNMP/Web browser Expansion slot for specialist application cards Dual power supply inputs for added reliability Connector for IO expansion slave equipment Space saving 1RU high 19 inch rack mount enclosure Box 11-681, Ellerslie Auckland 1542 New Zealand www.letechnic.com Phone: +64 9 525 3539 Fax: +64 9 525 4251 Email: sales@letechnic.com Precision Clock Box 11-681, Ellerslie Auckland 1542 New Zealand www.letechnic.com Phone: +64 9 525 3539 Fax: +64 9 525 4251 Email: sales@letechnic.com Specifcations Internal Oscillator Accuracy (with GPS fx) 1x10 -12
Stability (with GPS fx) 1x10 -12 24 hours Stability (holdover) 1 part in 1x10 -10
over full temperature range E1/T1 Signal Outputs 2x 100/120 Balanced 2x 75 unbalanced independently programmable for framed or 2048kHz operation. Sine Wave DDS Output Frequencies 100KHz to 10MHz with sub 1 Hz steps Output impedance 50 Output level -10dBm to +20dBm, 1dB steps Harmonics < -20dB relative to fundamental
PPS Outputs Outputs 2 independent or 1 diferential output Frequency 0.5 pulse/sec to 1 pulse/hour Duty cycle Fully programmable Impedance 50 or 75 individual, 100 or 150 diferential. Level approx.2.5V into 50/75, 5V unloaded Accuracy to UTC < 25ns with GPS lock Alarm Relays Number 2, independently programmable Contact type Single pole, change over Contact rating 2A, 220VDC, 240VAC Protection 2A fuse Expansion Internal expansion slot Supports expansion cards for additional ports or specialised applications Expansion connector Allows daisy-chaining of external E1 port expansion units with up to 32 ports each Physical Size 1 RU rack mount 150mm deep Weight 1.6 Kg Environmental Operational -10C to +60C Storage -30 to +80C Humidity Non-condensing EMC Compliance EN61000-6-2, EN61000-6-4, Tested to IEC xxxx susceptibility requirements Power Requirements Type Dual supply, independently monitored Voltage (standard) 48VDC nom (20 to 75 volts operational) Power requirements <15 Watts max during warm-up <7 Watts during normal operation GPS Receiver Parallel channels 12, with TRAIM Band 1575.42 MHz L1 C/A code Mode Over-determined timing mode One satellite timing mode PPS Accuracy <5ns (one sigma)
Network Interfaces Interface 1 10/100 base-T Ethernet, IEEE1588v2 hardware timestamping / SyncE Interface 2 SFP, supporting optical/copper GigE modules, IEEE1588v2 hardware time-stamping/SynchE Network Time/Frequency Synchronization IEEE 1588v2 Grandmaster or slave functions SynchE Master or slave functions NTP SNTP v4 server, Stratum 1 Management and Confguration Remote SNMPv1* management and traps, Webserver management and frm- ware upgrade Local USB/RS232 ANSI terminal RS232 frmware upgrade * SNMP v2 and v3 available soon as a frmware upgrade Precision Clock