Você está na página 1de 26

Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022

SAUDI COMMITTEE FOR UNITED NATIONS


PALESTINIAN RELEIF DEVELOPMENT PROGRAMM





CONSTRUCTION OF 300 RESIDENTIAL
UNITS IN RAFAH

Financed By:
Saudi Committee For Palestinian Relief

Implemented By:
United Nations Development Programme
"Programme of Assistance The Palestinian People"


Construction of Tal EL Sultan
Sewage Pump Stations


Bill of Quantity






SAUDI COMMITTEE FOR UNITED NATIONS
PALESTINIAN RELEIF DEVELOPMENT PROGRAMM





CONSTRUCTION OF 300 RESIDENTIAL
UNITS IN RAFAH

Financed By:
Saudi Committee For Palestinian Relief

Implemented By:
United Nations Development Programme
"Programme of Assistance The Palestinian People"


Construction of Tal EL Sultan
Sewage Pump Stations


Bill of Quantity
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
1 Bill No. 1
Earth Works:-

1-1
Excavation in sandy soil or any other soils including
backfilling with selected or imported sand material
(sand are available near the site) around footings and
walls for wet pit & bar screen to design levels on
layers not more than 25cm thick each with
compaction. The compaction tests should exceed
97%. The price also includes transportation of
excavated material to approved dump area according
to engineers instructions, and includes using shutter
bracing to the excavation sides.
L.S 1

Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
Total of Bill no. (1)
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
2 Bill No. 2
Concrete Works:-

The work includes the supplying of all the required
materials (steel reinforcement, formwork & tie rods
(Batant)& sleeves, concrete, binding wire, nails,
spacers... etc.) Shoring, shuttering, safety measures,
testing, construction joints, water stop 25cm wide,
openings, polythene sheets beneath the blinding
concrete, workmanship, etc..)
- All the following items shall be executed according
to drawings ,specifications and according to the
engineer's instructions.
a All tests costs to be included in the unit rate items,
without any extra paid money.
b All substructure items to be painted with hot
bituminous 70/25 paint as directed by the supervision
Engineers & the manufacture instructions.
c All internal surfaces of concrete to be Fair Face.
d All fixation of framework is by using tie rod (Batent),
and treatment of holes satisfactorily with approved
materials.
e Contractor must use new ply wood and to paint the
ply wood with approved oil
g all above ground concrete element must be fair face
surfaces.
2-1 Supply & cast ready mix plain concrete B 200 for
blinding beds 10cm thick for wet pit & screen
chamber as per drawings, specifications & the
engineers instructions.
m3 4
2-2 Supply and cast ready mix concrete B 300 with
additives (Super Plasticizer), the required
reinforcement steel for the reinforced wet pit & screen
chamber foundation as per drawings, specifications &
the engineers instructions.
m3 15
2-3 Ditto but reinforced F.F. concrete for the walls of wet
pit and screen chamber as per drawings,
specifications and engineers instructions.
m3 50
2-4 Ditto but for the reinforced columns, roof slabs &
beams for the wet pit & screen chamber as per
drawings, specifications & the engineers instructions.
m3 13
2-5 Supply & place B250 concrete casting, with minimum
reinforcement, for benching of wet pit & screen
chamber and for the pump foundation as shown in the
drawings & the engineers instructions.
m3 8
Total of Bill no. (2)

Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
3 Bill No. 3
Miscellaneous Works:-

3-1 Supply & paint at least two coats of epoxy (Nitocote
ET 550) for the internal walls, slabs, and floors of wet
pit & screen chamber as per manufacturers
instructions, drawings, specifications & the engineers
instructions.
a NOTE:-After fishing epoxy paint Test for water
tightness is required for 3 days before starting
backfilling around wet pit and screen chamber, the
structure will be accepted if there is no leakage
occurred
3-2 Supply & install removable stainless steel platforms
consist from 4X0.60 cm S.S. plate, 5 cm clear spacing
, placed on stainless steel frame 5X5X0.5 cm casted
and fixed with concrete benching with over all
dimension 85X70 cm with all needed fitting as shown
in the drawings, specifications and according to the
manufacturer's instructions and the engineers
instructions.
no. 1
3-3 Ditto but 85X50 cm
no. 1
3-4 Supply & install galvanized shakerd steel plate cover 3
mm (two leaves) open able with hinges (120x90cm)
including G.S. angle frames, and suitable lock for the
wet pit & screen chamber with approved epoxy paint
suitable for sewage with all needed fitting for fixation
to the concrete as shown in the drawings,
specifications and according to the manufacturer's
instructions and the engineers instructions.
no. 3
3-5 Ditto but 85X90 cm
no. 2
3-6 Supply & install stainless steel ladder 60cm width C-C
consist of 2" S.S pipe ( 2.77mm th.) and 3/4" S.S
pipes (2.11 mm th.) every 30 cm, include fixation to
walls by S.S plate every 90 cm min. with all needed
fitting, welding, half spherical end cap & the needed
accessories to complete the job as shown in the
drawings, specifications and the engineers
instructions.
m 15
3-7 Supply & install steel ventilation pipes 6 dia. 5/32"
thickness with epoxy paint including all the fittings,
elbows, jointing, fixed to the wall, & the needed
accessories to complete the job as shown in the
drawings, specifications and the engineers
instructions.
m 15
3-8 A wheeled standard dumping trolley 1 m3 to suit
municipality car for the bar screen including wheels
brakes & barrier, including oil painting & the needed
accessories to complete the job as per
recommendation of municipality of Rafah.
no. 2
Total of Bill no. (3)
m2 350
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4 Bill No. 4
Mechanical Installations: -

Qualified and specialized contractor should perform
All the following works without any extra money to be
paid to contractor.
a The contractor shall submit complete and detailed
method of statement for all relevant mechanical and
electrical installations of the pump for engineers
approval prior to the work commencement. The
engineer prior to the installation should approve all
materials and components.
b It is the contractors responsibility to check all required
works and associated mechanical and electrical
components for safe connections of the pump, which
will be his complete own responsibility.
c The contractor shall perform all standard testing,
commissioning, programming and parameters
settings; all in accordance with pump manufacturers
recommendations.
d By the end of the work the contractor shall submit to
the engineer a complete set of as built shop drawing
stating all settings and operating schemes & as per
contracts requirements.
e All fixations to be with chemical capsules & s. steel
bolts or s. steel expandable plugs, and under Engineer
instruction.
f all the materials must be suitable to be used for
sewage works.
g It is the contractors responsibility to supply clean
water for initial testing & operation the system.
Supply, install, connect, test and operate submersible
non clog centrifugal pump [ Flygt {NP 3153.181 HT
curve no (53-455-00-4550)}, or approved equivalent
by the engineer], 65m3/hr discharge at 18m head,
Impeller (N) type, 100mm flanged outlet, 1460RPM,
discharge connection. Equipped with built in electric
cable 15m min. length and cable holder. S.S chain,
base and outlet size 100mm, upper guide holders &
guides pipe 2" (S.S 2.77 mm th.). All electrical
protection controllers should be supplied and installed
in accordance with the manufacturer recommendation
such as (FLS10, thermal contact, stator over heating
protection bearing temperature sensor float switch)
Certified motor characteristics, shop test performance
curves, spare parts regular (as recommended by
manufacturer) and maintenance catalogues.

4-1
no. 2
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4-2 Supply and test a submersible sewage pump for
maintenance. Flygt or approved equivalent, S type
installation, capacity 7L/sec. at 10 m head, 1-phase-
230 V, 1.5kW, 25m cable, level regulater Flygt ENM10
(Pear shape) heavy duty, control float. With coupling
and flexible canvas 2 piping 25m long, water in oil
sensor. The price include stainless steel chain, Spare
parts and maintenance catalogues.
no. 1
4-3 Supply and install a pump base for the future third
pump as in item No. 4-1 include upper guide holders &
guides 2" pipe (S.S 2.77 mm th.)
no. 1
4-4 Supply & install a Vertical Automatic Basket Screen
unit (Siniaver) type or equivalent, with a size capable
to handle a maximum flow of 36 liter/sec, all
submersible parts of Back Raked Screen made from
stainless steel. Complete with a Basket Material
(S.Steel 304 spacing between bar 15 mm), Guides
(S.Steel 304 fixed to sump wall with S.Steel Bolts),
Door and Door Frame, Basket Door, Basket Guide and
Lifting Eye (S.S. 304), Rake Frame (G.S.), Legs
Stabilizer (G.S), Sliding Gate (S.S. 304), Cable Holder
(S.S. 304), Gear Motor (1.5 HP 3ph 400 vac 50HR),
Proximety Swetch (N.C. 30 mm. 24 VDC NPN), Control
cabinet (reinforced polyesterd), Lifiting & Steel Cable
(S.S. 316), Dead Plate & Hopper (S.steel 304), Door
Weight & Slide Gate Weight (Steel), Pully & Wheel
(Bronze) and all necessary parts and fittings needed
for proper installation and operation of unit in its place
as indicated in the drawings, specifications and
according to the manufacturer's instructions.
no. 1
4-5 Supply & install a manual bar screen (50*60 cm) unit
with maximum flow 37 L/S which consists of stainless
steel frame & channel, and two (U) shape beams size
75*50*5 mm to use in lifting up and down the screen
as shown in the drawings, all the work must be
executed as per drawing, specifications and Engineer
instructions.
no. 1
4-6 Supply and install 200mm gate valve (Raphael,
Hakohav or equivalent) of working pressure 16 bars
with flanges, bolts, gaskets, hand wheel and all
fittings needed for proper installation and operation as
indicated in the drawings, specifications and according
to the manufacturer & engineer's instructions.
no. 1
4-7 Ditto but gate valve of 100 mm diameter,
No. 2
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4-8 Supply & install combination air valve, from ARI Saar
D-020 or equivalent , 50mm diameter, complete with
50 mm flanged gate valve (PN16), 2 piping, drain
pipe, with all needed fittings (flanges, bolts,.etc.) as
indicated in the drawings, specifications and according
to the manufacturer & engineer's instructions.
No. 2
4-9 Supply & install swing type check valve ARI ( NR-
040), or equivalent. 100mm diameter, PN16, hinged
with lever, limit switch IP65 & cables to main panel,
removable cover, flanges, bolts, gaskets and all
required accessories, as indicated in the drawings,
specifications and according to the manufacturer &
engineer's instructions.
No. 2
4-10 Supply and install electromagnetic flow meter (Elster
magmaster split, or equivalent all to engineers
approval) with 200mm diameter on the manifold.
Including flanges, gaskets & bolts, complete with
Sensors, separate converter/integrator, transmitter,
remote indicator, converter installed at panel door or
wall next to the main DB, showing both flow rate &
volume including all cabling (no joints) and
accessories complete as indicated in the drawings,
specifications and according to the manufacturer &
engineer's instructions.
No. 1
4-11 Supply and install oil pressure gauge 4 rated (0-
16)kg/cm2 with valve, all needed fittings, tees,
elbows, welding & piping as indicated in the drawings,
specifications and according to the manufacturer &
engineer's instructions.
No. 3
4-12 Supply & Install wall mounted sluice gate { TBS
(RVSA), or equivalent } 400mm opening diameter
(round), stainless steel 316 with EPDM sealant &
associated operating gear, fittings, suitable for
wastewater with extended arm to surface level. as
indicated in the drawings, specifications and according
to the manufacturer & engineer's instructions.
No. 1
4-13 Supply & install HDPE channel sluice gate
600X600mm opening (rectangular){ TBS (PKS), or
equivalent }, stainless steel 316 with EPDM sealant &
associated operating gear, fittings, suitable for
wastewater . as indicated in the drawings,
specifications and according to the manufacturer &
engineer's instructions.
No. 2
4-14 Supply and install DN 8" diameter (PN16) complete
flange dresser with ears and tie rods, flanges, bolts
and gaskets as indicated in the drawings,
specifications and according to the manufacturer &
engineer's instructions.
No. 1
4-15 Ditto, but DN 4" diameter.
No. 2
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4-16 Supply and install DN 4" diameter, 45 degree steel
long radius bend with internal alumina lined (concrete
mortar) and external epoxy paint completed with all
necessary jointing assembly or any needed fitting and
completely welding with main discharge pipe and
proper installation of the bend in its place all as
indicated in specifications, drawing. and engineer
instructions No. 2
4-17 Ditto, DN 4" diameter but with blind flange. No. 1
4-18 Ditto, DN 4" diameter, but 90 degree with all needed
fitting flanges, bolts, gaskets.etc .
No. 2
4-19 Ditto, DN 4" diameter, 90 degree but with blind flange.
No. 1
4-20 Ditto, but DN 8" diameter 90 degree with thrust block.
No. 1
4-21 Ditto, DN 8" diameter but 45 degree with thrust block.
no. 3
4-22 Supply and install DN 4" diameter, 4" X 2" diameter,
steel TEE with internal alumina lined (concrete mortar)
and external epoxy paint completed with all necessary
jointing assembly or any needed fitting for proper
installation of the TEE in its place all as indicated in
drawing, specifications and engineer instructions
no. 4
4-23 Supply and install Blind flange DN 8" with all needed
fittings and accessories (flanges, bolts, gaskets,
welding, sleeves . Etc) as indicated in drawing,
specifications and engineer instructions.
No. 1
4-24 Supply and install steel DN 4" diameter pipe 3/16 inch
thickness, internal alumina lined (concrete mortar) and
externally coated with (epoxy) to connect the base of
the pump with manifold, including S.S Fixation to the
concrete wall every 1 m . The work includes cutting,
welding, steel flanges, S.S Bolts, anchorage in
concrete, special rubber around pipe to reduce
vibrations between pipes and concrete sleeves and all
other fittings as per drawing, specifications and
Engineer instructions.
M 18
4-25 Ditto, DN 4" diameter for discharge pipe above ground
level include jacks support 3" diameter , flanges, bolts,
gaskets and needed fitting as per drawing,
specification and engineer instructions.
M 7
4-26 Supply & install 200mm diameter manifold steel pipe
3/16 epoxy external coating and internal alumina
(concrete mortar), above ground level for the pressure
line (force main) including flanges , gaskets, bolts, and
connect with the (3) 100mm pipes also includes
concrete supports & connecting to 225mm UPVC line
under ground with appropriate fittings the price include
excavation and backfilling with clean sand for
underground part. all the works as per drawing,
specifications and Engineer instructions
m 20
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4-27 Supply and install 2 diameters 5/32" thickness by-
pass system, consisting of steel piping epoxy external
coating and internal alumina and connect to the
200mm manifold, with one 2 gate valve(PN16) and
one dresser with retaining bolts, elbows, tees, flanges,
blind flanges and fixation to walls all with 3 outlets at
the pumps level in the wet pit, as per drawing,
specifications and Engineer instructions.
L.S 1
4-28 Supply and install 2 diameters 5/32" thickness
washing system, consisting of steel piping epoxy
external coating and internal alumina and connect to
the 100mm manifold, with one gate valve(PN16) DN
2" diameter, and one dresser flange with retaining
bolts, one elbows 90 degree, one tee and one blind
flange all works shall be as per drawing, specifications
and Engineer instructions.
L.S 1
Supply and install electrical chain hoist with push
trolley, with I-beam (300x125x10.5)mm IPN300
including painting with sufficient length for loading &
unloading on trucks, from recommended type YALE
with protection IP66 minimum, or approved equivalent
with all materials and all needed accessories to
complete the job as follows:-
With load 1000kg {16 (fpm) lifit speed, single phase
(1 hp motor)}, to service a height of 10 meters for the
pumps include hand geared trolley as per drawing
instructions.
4-30 Supply and install cylindrical steel fuel tank of 6mm
wall thickness and 3m3 capacity painting with epoxy
paint (1 coat primer & at least 2 coat epoxy) complete
with all required valves, fittings, pipes, level indicator
,1/2HP Fuel Pump ,Ball valve , Non Retern Valve ,
and to be connected to the generator set using 3/4"
galvanized steel pipe Scedule 40 and all necessary
fittings, valves, and connections, and R. concete base
to making good and all according to drawings,
specifications and instructions by the engineer.
No. 1
1
Lump
Sum
4-29
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART A
WET PIT & SCREEN CHAMBER
4-31 Supply ,install, connect and test standby complete
electrical package diesel generator
Caterpillar/Olympian type , set 3ph , 400 V, 50HZ,
65KVA/ 52.0 kw capacity as per specification :
All the following items must be original type according
to the generator manufacturer , including sensor heat
unit, under voltage relay over voltage relay ,voltage
regulator, speed control , unit oil pressure, phase
sequences, phase failure, all measurement
instrument, alternator, mounting arrangement, anti
vibration, battery unit , battery charger, main circuit
breaker ,primary fuel filter, fuel water separator
,silencer and , built in fuel daily tank .
The system shall be sound proof (Sound Attenuated
Enclosure) all accessories and, fitting according the
specification and engineer instruction.
- the cost of suppling & casting of the concrete
foundation for the mentioned generator is included in
this item .
no. 1

1 Total of Bill No. (1) {Earth Works}
2 Total of Bill No. (2) {Concrete Works}
3 Total of Bill No. (3) {Miscellaneous Works}
4 Total of Bill No. (4) {Mechanical Works}
5 Total of Bill (A) of Wet Pit & Screen Chamber Works
Total of Bill no. (4)
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
1 Pressure Line
1-1 Supply and install pressure line (PVC- U) pipes,
225mm diameter, 8.60 mm thickness, 10 bars pressure,
including all required fittings, bends, thrust blocks,
handling, laying, testing, repairing, connection to
energy breaker manhole, including warming tap with
wire with all needed accessories, fittings as per
drawings, specification and Engineer's instructions.
The price include the trench excavation in any soil (1.3
to 2.5 meters depth), and removal of obstacles for
above pressure line, including sand bedding,
compacted backfilling with approved selected material
in layers of 25cm to design level. as per drawings,
specification and Engineer's instructions.
The price include reinstate repairing any damage
resulted from excavation of the trench to the roads
facilitates all according to specification & as per
engineer instructions.
2 Energy Breaker Manhole
2-1 Supply and cast ready mix Concrete B300 with
reinforcement for the Energy Breaker Manhole, the
price includes excavation, backfilling in layer not more
than 25 cm, plain concrete 10cm thick, two heavy duty
cast iron cover (25) ton, opening diameter 60cm, cast
iron steps every 30cm, 6 steel vent pipe to nearest
side wall benching, hot bituminous 70/25 paint for
underground external walls, with all needed
accessories as per Drawings. Specification and
Engineer's instructions.
No. 1
2-2 Supply, install including excavation (1.5- 2.0
meters depth) & backfilling, 12 UPVC pipe 9.2
mm thick, SN8, between energy breaker manhole
and existing manhole ( in unrwa project) with
manhole connector (male & Female) to required
design level and slope, with all needed fittings,
complete as per Drawings. Specification and
Engineer's instructions.
m.r. 12
Tal El Sultan Sewage Pump Stations
PART B
Pressure line, Energy Breaker Manhole and Gravity lines
m.r. 350
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART B
Pressure line, Energy Breaker Manhole and Gravity lines
3 Gravity lines
3-1 Supply, install including excavation up to 4.00
meters & backfilling, 12 UPVC pipe 9.2 mm thick,
SN8, between screen chamber and main control
manhole and also between main control manhole
and sewage manhole (out side the pump yard)
with manhole connector (male & Female) to
required design level and slope, with all needed
fittings, complete as per Drawings. Specification
and Engineer's instructions.
m.r. 30
3-2 Supply and install precast manholes, 1.20 meter
in diameter for gravity, including manhole
connectors for the 12" gravity line, depth up to
4.00 m meters, the price includes excavation,
backfilling in layer not more than 25 cm, plain
concrete 10cm thick, heavy duty cast iron cover
(25) ton, opening diameter 60cm, cast iron steps
every 30cm, hot bituminous 70/25 paint for
underground external walls, with all needed
accessories as per Drawings. Specification and
Engineer's instructions.
no. 1
Total of Bill no. (B)
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
1 Boundary walls & Landscape
1-1 Supply and construction of the boundary wall
from hollow concrete blocks, (202040 cm)
and the price include the concrete infill (B250)
all according to drawings, specifications and
instructions by the Engineer.
m
2
165
1-2 Supply and cast reinforcement concrete B
250 for foundations, ground beams, columns
and top beams for the boundary wall the price
include the needed excavation, Backfilling
also painting of exposed surfaces of
underground element with two hot bituminous
paint (70/25), polyethylene sheet under
foundation, all according to drawings,
specifications and instructions by the
Engineer.
m
3
23
1-3 Supply and make external plastering 15mm
thick and two coats of Tyrolean finish coats
for walls and the price include expansion joint
according to drawings, specifications and
under supervision. The price include paint the
columns and top beam with at least 2 coats
color external supercryl and one coat pendrol.
m
2
430
1-4 Supply & cast in reinforced concrete B250
chamfered edge beam 20x30 the price
include excavation & backfilling & leveling the
green area inside the pump yard as per
specifications and drawings.
m
3
2
1-5 Supply & cast in reinforced concrete B250 for
apron, the price include supply, spreading,
leveling and compacting 15cm (M.D.D 100%)
of base coarse material with CBR80 leveling
up to required levels, compaction of subgrade
to 98% M.D.D the site under the concrete as
per specifications and drawings.
m
3
2
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
1-6 Supply ,spreading ,leveling , damping and
compacting 15cm (M.D.D 100%) of base
coarse material with CBR80 including the
excavation and backfilling with approval
material, leveling up to required` levels,
compaction of subgrade to 98% MDD the site
according to drawing specifications and under
supervision .
m
2
135
1-7 Supply, spread, install, colored interlock tiles
8 cm thick includes 5 cm clean sand,
compacting, tiles testing all according to
drawings, specifications and instructions by
the Engineer.
m
2
135
1-8 Supply and install steel gate 2.04.0 m
painted one primer coat and two oil coats at
least, the price include lock device type
Walley, latches, all according to drawings,
specifications by the Engineer.
No. 1
2 Service Room
2-1 Supply and cast reinforcement concrete B
250 for foundations, ground beams, Lintels,
sill and canopies the price include the needed
excavation, reinforcement, shuttering,
Backfilling also painting of exposed surfaces
of underground element with two hot
bituminous paint (70/25), all according to
drawings, specifications and instructions by
the Engineer.
m
3
8
2-2 Ditto but B 300 for columns and neck
columns.
m
3
2
2-3 Supply and cast concrete B250 for floor slab
of 10 cm thickness on ground including
reinforcement ( 8 mm every 20 cm in both
directions ) including polythelen sheet and
compaction of the subgrade to 97%, and
making good all according to drawings,
specifications and instructions by the
Engineer.
m
2
26
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
2-4 Supply and cast ready mix concrete B 250 for
suspended hollow block slab 25 cm thick,
including the reinforced steel, hollow cement
block 40 x 25 x 17cm, all inverted beams
everywhere in the slab and all other materials
all according to drawings, specifications and
instructions by the Engineer.
m
2
45
2-5 Supply and cast Reinforced concrete B250
for electrical channel, the price include
fixation of painted steel angle 50X50X5 mm
and 3mm shakerd plate. cover painted for
electrical cable channel (which not as long as
channel itself) with all required angles and
materials and making good all according to
drawings, specifications and instructions by
the Engineer.
m.r. 4
2-6 Supply and construction of walls from hollow
concrete blocks, (202040 cm) and the price
include the concrete Fillet (B250) all
according to drawings, specifications and
instructions by the Engineer.
m
2
70
2-7 Supply and make internal plastering 13 mm
thick to walls, soffits and ceiling, after rough
primer nail rendering. Works include all
materials needed to finish the works all
according to drawings, specifications and
instructions by the Engineer.
m
2
120
2-8 Ditto but for external plastering 15mm thick to
walls and soffits the price including additional
layer of 5mm thick lime free mortar (mix 1: 3)
and make two coats of Tyrolean finish with
white cement for external plastering as per
specifications and drawings.
m
2
70
2-9 Supply and install terrazzo floor tiles (grade A)
size 25cm x 25cm x 2.5cm laid on 2cm
mortar bed and 5 cm sand bed and terrazzo
skirting 25cm x 7cm x1cm including all
materials and testing all according to
drawings, specifications and instructions by
the Engineer.
m
2
25
2-10 Supply and install best quality non slipping
ceramic floor tiles (grade A) size 20 cm x
20cm x 6mm thick all according to drawings,
specifications and instructions by the
Engineer.
m
2
3
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
2-11 Supply and install white glazed wall tiles
(grade A) size 20 cm x 20cm x 6mm thick laid
on mortar backing up to lintel level including
lime free cement plaster coat (1:3) as
specified in the drawing and approved by
representative engineer.
m
2
23
2-12 Supply and Paint, internal walls and Ceiling
with one coat of Pendrole primer and at least
two coats of emulsion paint (Polyside) as
specified in the drawing and approved by
representative engineer.
m
2
120
2-13 Supply and install local marble (grade A) size
25 cm wide x 3cm thick for windows sills laid
on 2 cm thick mortar bed including polishing
and grooving as approved by the
representative engineer and as specification
and drawings.. m.r. 5
2-14 Supply and lay precast terrazzo stair treads
size 35 cm wide x 4cm thick chamfered once ,
rebated once and laid on 2cm thick mortar
bed same color and kind of the floor tiles and
the price including terrazzo stair risers size
12.4cm high x2cm thick and skirting 20cm
high x2cm thick on the both sides as
specification and drawing.
m.r. 4
2-15 Supplying & fix (W1) (1.4X1 m) white
aluminum windows section 7000 with two
rails, with min. wall thick 1.5mm as frame,
glass 4 mm thick, ironmongery , accessories
and hard ware as per specification and
drawings No. 3
2-16 Ditto but section 4500 (W2) overall size
60x60cm with two hinges at the mid as per
specification and drawings No. 1
2-17 Supply and fix steel protection for windows
over all size W1 140x100 cm .the prices
including mild steel frame size 40 x 8mm
thick, vertical steel plate size 20mm wide x
8mm thick fixed every 12cm C.C, decorative
circles 20x2mm, all by welding to the frame.
Fixed on walls by steel angle ties, painting
with oil paint, all according to drawing,
specification and engineer's instructions.
No. 3
2-18 Ditto but window size W2 60x60 cm
No. 1
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
2-19 Supply and install steel door 2.45x1m (type
SD1). The price should include oil painting
two coats, primer coat, and Walley switch
type lock, hinges, iron mongery and lock
devices all according to drawings,
specifications and instructions by the
Engineer. No. 1
2-20 Ditto, but 2.25x0.9m Type (SD2) No. 1
2-21 Supplying & fix Wooden Door D1
(100X225X4.5 cm) for bath room (carpentry
works from good wood grade A including
frame cover mould, architrave and at least
two coats of oil paint, 15cm Aluminum kick
plate 1mm thick from both sides, hard ware
locked type Walley switch or equivalent and
brass hinges 10cm height and all other fitting
according to specification and drawings.
No. 1
2-22 Supply and cast light weight concrete 1:9 on
the roof with thickness of 9-3cm to the
direction of the drain the price include fillet
angle 5X5 cm, and making good all according
to drawings, specifications and instructions by
the Engineer.
m
2
45
2-23 Supply and install roof water proofing course
consisting of polypit sheets (4.0mm thick) and
base coat of bitumen and making good all
according to specifications and instructions by
the Engineer. The rate include verticals parts
skirting as per specification and drawings.
Note: Measurement will be for the horizontal
projection
m
2
45
2-24 Supply and fix white glazed fireclay European
squatting W.C. suite (HARSA Type), or
equivalent complete with plastic double action
flushing cistern, and fixed chromium plated
tap 1/2, including all water supply pipes
EPDM 16 mm to the distribution box, flushing
mechanism, angle valves, 4 diam PVC
drainage pipe to the nearest manhole as
specification and drawings.
No. 1
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
2-25 Supply and fix white glazed fireclay hand
wash basin size 56cm x43cm (HARSA Type)
or equivalent, complete with all water supply
EPDM 16 mm to the distribution box, waste
fitting, trap, plug and chain, swan neck water
tap( tibesa or equivalent) and mirror
60x60cm, and the drainage line 2 to the
nearest floor trap. No. 1
2-26 Supply and fix floor trap 4inch diameter,
complete with heavy duty brass grating and
4& 2 PVC drainage pipe to the nearest
manhole and including S trap if needed as
specification and drawings.
No. 3
2-27 Supply and fix cold water storage plastic tank
500 liter capacity, approved type, complete
with lockable cover, 1 inch diam. float valve,
overflow pipe (1diam) and drip tray, with all
connections & 1" pipes from the manifolds up
to tank and include the distribution pipes 3/4"
to the distribution box in the bath with all
accessories & need valve. The price include
supply and cast concrete base (B200) under
the tank as specification and drawings,
including painting tanks with white paint.
No. 1
2-28 Supply and install concrete manhole of
internal diameter 60 cm ,and (50-100) cm
depth according to the required level, 12cm
thick plain concrete for walls and base, slab,
with cast iron cover with frame 50cm opening,
8 ton bearing capacity, including excavation,
backfilling, hunching and making good
according to specification ,drawing, and the
engineer instructions.
No. 2
2-29 Supply and install water distribution box
(60x65x15) cm with all needed accessories
All lines to have Sagiv valves and Air valves
with aluminum cover as per drawings and
engineers instructions. No. 1
2-30 Supply and install Galvanized steel pipe and
fittings (3/4) including insulation with
asphalt paper, excavation & backfilling with
clean sand , jointing using all necessary
fittings, valves and fixing with brackets
screwed to concrete or block work as
specification ,drawings and engineer
instruction.
m.r. 40
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART C
Boundary Wall, Landscape and Service Room
2-31 Supply and install UPVC pipes 160mm, SN8
for drainage, with sockets ,work includes
excavating of trenches (depth 0.75-
1.5m),bedding, compacted backfilling with
clean sand, connecting to the manholes and
hydraulic test according to the specifications
and drawings m.r. 40
2-32 Supply and install 3" P.V.C rain drainage
pipes including all necessary bends
connections, floor trap, G.S. grating mesh
ballon, and making good all according to
specifications and instructions by the
Engineer. m.r. 9
2-33 Supply and install electric heater 60Lt. Ariston
type with thermostat, piping MDPE 16mm
from & to the distribution box and valves,
electrical switch connection to the electricity
source and all fittings and accessories as per
drawing and engineer instructions.
No. 1
2-34 Supply and erect local marble 3 cm thick for
cubboards 60cm wide and 90cm high and 200
cm length including the top surface with
round edgs, vertical dividers, and internal
horizontal shelves, back of cubboards, floors,
skirting 10cm high, Aluminum leaves and
making the needed opening for basin.
a The price include supply and fix white glazed
fiercely kitchen basin size 60x40 cm including
waste fitting, trap, plug and chain, steel
brackets supports and the drainage line to
floor trap.
b The price also include Supply and fix
chromium water swan neck tap (tibesa type or
equiv.) 1/2" dia. Including cold water supply
lines EMDP 16 mm to the distribution box.
2-35 Supply and install white glazed steel shower
tray size 70x70x7cm with shower rose and
mixer (tibesa type or equiv.) including cold
and hot water supply lines EPDM 16 mm to
the distribution box dia., waste fitting, trap,
plug with chain and drainage connection to
the nearest manholes.
No. 1

Total Of Bill (C)
L.S 1
Total of This Page
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Main Distribution Board
2 Supply and Install M.C.CB 4pole
(4x100Amp)/63,with all nesseccary wiring
,connections and all accessories . NO 2
3 . Supply and Install LTL((3x160/100Amp) with
External hand all nesseccary wiring ,connections and
all accessories . NO 1
4 Supply and Install indication lamps 220V/15W ,Red
,Yellow and Green colured with Three stages
Pushbutton NO 3
5 Supply and Install CTs (3x100/5)Amp . NO 10
6 Supply and Install 3PH,KWHM(3X5A)With all
nessecery wiring and connections.
NO 1
7 Supply and Install 3PH,KVAR(3X5A)With all
nessecery wiring and connections. NO 1
8 Supply and Install 1PH,KWHM(3X5A)With all
nessecery wiring and
NO 3
11 Supply And Install voltage selector switch with all
wiring and connections. NO 1
ATS
NO 5
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
Supply and Install Ammeters (0-100A) with all
nessecery wiring and connections.
Supply And Install Voltmeter (0-500V) with all
nessecery wiring and connections.
Supply ,Installand Commissioning and Testing main
Distribution Board (M.D.B) of Size (180cm length,
60cm width ,50cm depth , made of hot dipgalvanized
steel 2mm thicknessfactory assembled and tested in
accordance with international standards.The works ,
include frames painting with antistatic paint,
busbars,foundation trenches,sleeves tohandoverclean
tested and in operating conditions .
1
12
1
9
NO 3
10
NO 1
Supply and Install 4 poles(4x160A) motorized type
automatic transfer switch with controlunit
,220Vac/24Vac operating motor with NC and No
contacts , timers and all necessary relays andTimers
with their contacts , Eletrical and Mechanical
interlock.
Set
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
MTS
Supply and Install 4 poles(4x160A) MANUAL
Transfer switch with NO and NCcontacts , and all
necessary relays andTimers with their contacts ,
Eletrical and Mechanical interlolock Set 1
UPS
Supply and Install 1kW, 3 minutes UPS,1KW with
Back upbattery and charger and Manual 3 position
switch with all cables and connections wires
&M.C.Bs NO 1
Pumps Panel Boards and PLC
Supply ,Installand and Commission main
Distribution Board (M.C.C) of Size (180cm length,
60cm width ,50cm depth , made of hot dipgalvanized
steel 2mm thicknessfactory assembled and tested in
accordance with international standards.The works ,
include frames painting with antistatic paint,
busbars,foundation trenches,sleeves ,to
handoverclean tested and in operating conditions .
NO 3
17 Supply and Install M.C.CB 4pole (3x100Amp)with
all nesseccary wiring ,connections and all accessories
. NO 2
18 Supply and Install indication lamps 220V/15W ,Red
,Yellow and Green colured with Three stages
Pushbutton NO 6
19 Supply and Install CTs (3x100/5)Amp .Include
wiring and all needed accessories . NO 6
22 Supply And Install voltage selector switch with all
wiring and connections. NO 2
23 Supply And Install RVS-DN(44) With By pass
Ccontactor and all necessary wires ,cables and
connections to pumps motors .. NO 2
24 Supply And Install power factor connectionunit
2x(3x12.5kVAR With contactors and circuit breakers
with all necessary wires ,cables and connections to
pumps motors ..
NO 2
Supply and installExtract Fan 10cm diam with
thermostat and switches
21
NO 2
15
16
20
NO 8
14
NO 1
13
Supply and Install power factor coreection unit
withautomatic control unit , Static Capacitors with
quick discharge resistors M.C.Bs and Contactors
Supply And Install Voltmeter (0-500V) with all
nessecery wiring and connections.
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
25 Supply And Install Transformer(1kw)400/230V with
all necessary wires and connections including Circuit
breakers for protections . NO 1
26 Supply And Install Transformer(1kw)400/24Vac with
all necessary wiresand connections including Circuit
breakers for protections . NO 1
30 Supply And Install surge arrester with LTL(4x80A)
With Wires and cables. Set 3
32 Supply and install 24volt relay, finder type with
auxiliray contacts . NO 24
33 Supply and start stop pushbutton NO 6
34 Supply and 3 position selector switch NO 3
35 Supply and Install 220V ,Horn for high level Alarm. NO 1
36 Supply and Install underVolt relay,phaselosess relay
and rotation relay with all necessary wires and
connections. NO 2
37 Supply and Install elecrical digital counter 3.5 digit
readout with all necessary wires and connections. NO 2
38 Supply and Install hydroranger with inverse change
over and stainless stailhousing with all necessary
wires and connections. NO 2
39 Supply and Install 24vdc ,Sewage float switch IP68
with NO&NC Contacts with wether proof connection
boxes NO 2
40 Supply and Install 3phase ,25Amp with controlpush
button station unit for hoist including (5x4mmSq
Cable) From M.C.C to hoist Circuit breaker box. NO 1
41 Supply and install Barscreen control panel ,
3phase,25A with connections .
NO 1
NO 3
NO 2
Supply And Install m.c.b(3x25A) @10KA breaking
Capacity
29
31 PLC:
Supply and Install Plc with 32 input and output/32
output with software program ,modem ,MHI ,hand
heldprogram with all wiring Pvc Terminals , tags and
hevy duty labels for connection Terminals including
voltage selector switch , Reset pushbutton and
connections.
27
NO 10
28
NO 6
Supply And Install m.c.b(2x10A) @10KA breaking
Capacity
Supply And Install m.c.b(1x6A)@10KAbreaking
Capacity
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
42 Supply and 3 phase local (40A) disconnector With
External hand For Pump with its weather proof
enclousure IP68 Equipped with start stop push
buttons and Emergency stop Switch with glands and
all connections . NO 2
43 Supply and install diesel fuel control panelwith
Floatswitches ,contactors ,m.c.bs , Three
positionswitch , NO&NC Contacts with panel and
cables for connections to the pump. NO 2
EARTHING SYSTEM
45 Supply and Install EMT6/24VDC with all
connections and cables
46 Supply and Install Pump minicase with all
connections and cables
DB-S:Supply and Install Hot dip galvanized steel
board for Service , size (80x60x25) cm including :
-20KW contactor with auxiliary contacts, Toggle
switch , photocell with all necessary wiring and
connections.
Lighting Fittings
Supply and Install Fluorescent Lighting Fixture
(2x36w) with condenser , Ballast m Bulbs and all
wiring to operate lighting fitting. NO 3
49 Supply and Install weather proof circular glob with
(30W) PL lamp with all wiringand cables to operate
lighting fitting. NO 2
50 Supply and Install wall mounted weather proof
circular glob with (26W) PL lamp with all wiringand
cables to operate lighting fitting. NO 2
51 Supply and Install double pole on/off switch with all
wires .Type is bitchino , Gewiss italy made. NO 3
Sockets
Supply and Install 3pin 220V/13A socket with all
wires .Type is bitchino , Gewiss italy made. NO 5
53 Supply and Install 5pin 380V/16A industrial socket
with all wires .Type is Nisko ,bitchino , Gewiss or
approved equal. NO 1
54 Supply and Install 3pin 220V/20A socket with
on/offcontrol switch for water heater with all wires .
NO 1
2 ITEM
48
52
Earthing Syst. consistsof 35x3 mm galvanized steel
tape welded toreinforcement steel bars and at least to
two columns ..The work include Earthing manhole
,Bus bar , Testlink point with box , bonding clamps
and cu onductor 16 mmmsq, Electrodes 16mm diam
.Earth Resistance should be less than1.5 ohm
1
ITEM 1
44
47
NO
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
55 Supply and Install telephone socket with wires ,
junction box and all necessary connections. NO 1
56 Supply and Install TV socket with wires , junction
box and all necessary connections. NO 1
Cables Trenches
Excavate in soil with different levels cables Trenchs
,40cm width ,80cm depth from F.F.L for laying upvc
pipes inside trecnches ,the work MR 50
Manholes
Supply and Install 80cm diam manhole with 8ton
cover as per drawings and Engineer Instructions. NO 5
PIPES
Cables
Supply and Install XLPE Cable (4x25)mmSQ From
LV pillar to M.D.B With all necessary connections
and pipes . ITEM 1
62 Supply and Install XLPE Cable (3x10+6)mmSQ
From M.C.C Panels to pumps motor terminal box
With all necessary connections and pipes . MR 50
63 Supply and Install XLPE Cable (5x4)mmSQ From
M.D.B to Barscreen motor terminal box With all
necessary connections and pipes MR 20
64 Supply and Install XLPE Cable (5x4)mmSQ From
DB-S to Fuel pump motor terminal box With all
necessary connections and pipes MR 15
65 Supply and Install shilded control cable Cable From
microswitches to PLC Control Panel With all
necessary connections and pipes .ThePrices includes
Microswitches for NR Valves. MR 100
66 Supply and Install control cable (24x2.5) mmSQ
Cable From PLC Control Panel To Pump motors
With all necessary connections and pipes MR 100
67 Supply and Install 12 inch Extract Fan with Stainless
Steel Saftey Shutterincluding cables . M.C.BS
,Contactor, Thermal overload relay , control
Switch,PVC Sleeve and all needed Fittings To
operater The Fan with room thermistor . ITEM 1
68 Supply and Install Perforated cable tray(20x10) cm
with cover with all needed fixations.type is Obo
Peterman
MR 50
ITEM 1
DITO ,But From Generator To ATS with Control
cable (5x2.5)mmSQ with connections Terminals
57
58
59
61
60
Supply and Install 4 inch Upvc Pipe,SN8 inside cable
trenchs and backfilling with clean sand include
warning tape anf 8mm rope inside the pipes .
MR 50
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
ITEM
NO.
DESCRIPTION Unit Qty.
Unit Rate
US$
AMOUNT
US$
Tal El Sultan Sewage Pump Stations
PART D
Electrical Works
External Lighting Fixtures
Supply and Install Octagonal lighting Pole 10 meter
length with 250W M.H Luminaire NO 5
,chock coil , condenser , ballast , arms , control box
with 1x16 A m.c.b, Terminal connections ,Base
Concrete Foundation and 5x6mmsq cable inside 3
Inch flexible conduit .The work include excvation in
the soil ,80cm depth in the ground and backfilling
with clean sand .
Total Of Bill (D)
69
Contractor Signature
Package 14 - Construction of Sewage Pumping Station in Rafah-Tal El Sultan ITB 2011-022
BILL ( A ) WET PIT AND SCREEN CHAMBER $
BILL ( B )
PRESSURE LINE, ENERGY BREAKER
MANHOLES AND GRAVITY LINES $
BILL ( C )
BOUNDARY WALL, LANDSCAPE AND SERVICE
ROOM $
BILL ( D ) ELECTRICAL WORKS $
GRAND TOTAL $
NAME of CONTRACTOR:- ________________________________________
NAME of CONTRACTOR:- ________________________________________
( _________________________________________________________ $ )
TAL El SULTAN SEWAGE PUMP STATIONS
GENERAL SUMMARY
GRAND TOTAL IN WORDS:-
SIGNATURE of CONTRACTOR:- __________________________________
FAX NO. :- ________________________________
CONTARCTOR ADDRESS:- ___________________________________
STAMP:_
PHONE NO. :- ______________________________
MOBILE NO. :- _____________________________
Contractor Signature

Você também pode gostar