Você está na página 1de 12

1

SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Spesifikasi Teknis Pengadaan Soundsystem
Kantor Sekretariat DPRD Kota Tomohon
Tahun 2014

Mixer : 22-input audio mixer with an integrated USB computer audio
interface (1 unit)
Premium ultralow noise, high headroom analog audio mixer
8 state-of-the-art XENYX, phantom-powered Mic Preamps comparable to stand-alone
boutique preamps
8 studio-grade compressors with super-easy "one-knob" functionality and control LED
for professional vocal and instrumental sound
Neo-classic "British" 3-band EQs for warm and musical sound
Studio-grade FX processor with 16 editable presets including reverb, chorus, flanger,
delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio
recording, editing and podcasting software plus 150 instrument/effect plug-ins and ultra-
low latency driver included
Revolutionary energyXT2.5 Compact Behringer Edition music production software
included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all
computer platforms
Channel inserts on each mono channel for flexible connection of outboard equipment
3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for
monitoring/FX applications, 1 post fader (for internal FX or as external send)
Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all
channels
2 subgroups with separate outputs for added routing flexibility
Balanced main mix outputs with gold-plated XLR connectors plus separate control room,
headphones and stereo tape outputs
Control room/phones outputs with multi-input source matrix; rec inputs assignable to
main mix or control room/phones outputs
Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
"Planet Earth" switching power supply for maximum flexibility (100 240 V), noise-
free audio, superior transient response plus low power consumption for energy saving
High-quality components and exceptionally rugged construction ensure long life
Equalizer (2 unit)

Deskripsi :
Professional 31-band stereo graphic equalizer for live and studio applications

2
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and
can also be used as audio analyzer
Dedicated mono subwoofer output with adjustable crossover frequency
Additional sweepable high and low-cut filters for each channel remove unwanted
frequencies, e.g. floor rumble, hiss etc.
Highly accurate 12-segment LED input/output metering and input gain controls for easy
level setting
Ultra-low noise audio operational amplifiers for highest signal integrity
Relay-controlled hard-bypass with an auto-bypass function during power failure (failsafe
relay)
Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
Shielded toroidal power transformer for ultra-low noise performance
High-quality components and exceptionally rugged construction ensure long life
Crossovers (1 unit)
Deskripsi :
Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-
Riley filters with 24 dB/octave
Additional subwoofer output with independent Frequency control
Absolutely flat summed amplitude response, zero phase difference
Individual output Gain controls for all bands
Individual output Mute switches for easy band adjustment
Individual Phase reverse switches for instant phase correction
Switchable 25 Hz Low cut filter on each input for low-frequency driver protection
Servo-balanced and gold-plated XLR connectors for all inputs and outputs
Ultra-high precision potentiometers for ultimate accuracy and repeatability
Illuminated switches for secure operation in dark stage environments
Shielded toroidal mains transformer for minimal noise interference
High-quality components and exceptionally rugged construction ensure long life
Power Amplifier 01 (1 unit)

Product Features:
2 x 2, 000 Watts into 2 Ohms; 2 x 1, 400 Watts into 4 Ohms; 4, 000 Watts into 4 Ohms ( bridge mode)
ATR ( Accelerated Transient Response) technology for ultimate punch and clarity
Switchable limiters offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/ 4 " TRS input connectors for compatibility with any source
Professional speaker connectors and " touch-proof " binding posts support most speaker wiring systems
Selectable low-frequency filters remove damaging infra-sound frequencies
Independent DC and thermal overload protection on each channel automatically protects amplifier and
speakers

3
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

High-current toroidal transformer for ultra-high transient response and absolute reliability
" Back-to-front " ventilation system including air filter for reliable operation
" Built-like-a-tank, " impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life

Power Amplifier 02 (2 unit)


Product Features:
2 x 1, 500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3, 000 Watts into 4 Ohms ( bridge
mode)
ATR ( Accelerated Transient Response) technology for ultimate punch and clarity
Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio,
superior transient response and low power consumption
Switchable limiters offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Clip LEDs to monitor performance
XLR , 1/ 4 " TRS and RCA input connectors for compatibility with any source
Professional speaker connectors and " touch-proof " binding posts support most speaker wiring
systems
Built-in Subwoofer/ Satellite crossover for more flexibility
Independent DC and thermal overload protection on each channel automatically protects
amplifier and speakers without shutting down the show
Back-to-front ventilation system including air filter for reliable operation
" Built-like-a-tank " , impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life

Speaker Pasif 800 W(8 unit)
Deskripsi :
High Performance Woofer: 12" (305 mm)
Tweeter Compression Driver: 1.75" (44 mm)
Frequency Range: 65 Hz to 18 kHz
Power Rating: 800 Watts Peak Power; 200 Watts Continuous (IEC 60268-5)
Impedance: 8 Ohms
Sensitivity: 95 dB (Full Space)
Dispersion: 90 x 60
Crossover Frequency: 1.9kHz
Dimensions (H x W x D): 21-2/3" x 13-5/8" x 10-5/8" (550 x 345 x 270 mm)
Weight: 24lb. (10.9kg)
High-power, 2-way PA sound reinforcement speaker system for live and playback applications
(200W continuous/800W peak power)

4
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure
levels
Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1-3/4" titanium-diaphragm compression driver for exceptional high-frequency
reproduction
Ultra-wide dispersion, large-format exponential horn
Overload-protection circuitry ensures optimal HF driver protection
Versatile trapezoidal enclosure design allows different positioning: Stand-mounts with 25mm
pole socket or tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
2 professional speaker connectors plus 1/4" jack connectors
High-quality components and exceptionally rugged construction ensure long life

Subwoofer (2 unit)
Deskripsi :
800W/1,600W program/peak power handling @ 8 ohms
Powerful long-excursion 18" bass driver
Sound pressure level: 100dB (1 W @ 1 m) half space
Frequency range: 40300Hz (-10dB)
Neutrik Speakon connectors
21-1/2"W x 27-3/5"H x 21-3/4"D
Approximately 77 lbs.

Speaker Monitor Aktif 150W, 1 pair (2 set)
Deskripsi :
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency
diagrams
Built-in 265-Watt Bi-amp module with enormous power reserve
Ultra-high resolution ferrofluid-cooled tweeter
Long-throw 8 " woofer with special polypropylene diaphragm and deformation-
resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large sweet spot Active crossover
network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Servo-balanced inputs with XLR and TRS connectors
High-quality components and exceptionally rugged construction ensure long life

5
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

DVD Player USB (1 unit)
DVD-Video, VCD, CD
CD-R/-RW
DVD-R/-RW, DL/-RW (Video mode, VR mode)
DVD+R/+RW, DL/+RW (Video mode)
File formats: DivX, MP3, WMA and JPEG
Microphone Wireless : DUAL VOCAL, 1 pair (1 SET)

Microphone Kabel (4 unit)
Integrated microphone capsule design
Lightweight, rugged construction
-10 dB gain attenuation
Color ID caps (available separately)
Stand Mic (6 unit)
Type : Stand Mic Boom
Material : Hardened Steel
Finishing : Black Painted
Bracket Speaker (12 unit)
Type : Tripod Leg
Material : Hardened Steel
Finishing : Black Painted
Cabeling : Kabel Speaker (1 Lot)
Kabel : Setara Antel Tembaga Murni (80yard/roll)
Connector (1 lot)
Cabeling Internal (1 lot)
Kabel Micropone (2 unit)

6
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014




Rak Audio : (1 unit)

# Dimanfaatkan untuk meletakan mixer, power, equalizer, receiver mic wireless, DVD, Crossover dan
lain-lain.

Stand Mixer And Accesories With Caster, 8 U.





7
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Mic Conference system


TERDIRI DARI:
1. POWER SUPPLY CCS-CURD ATAU CCS-CU ( 1 unit)
2. CHAIRMAN UNIT CCS-CM-ID (3 unit)
3. DELEGATE UNIT CCS-D-ID (17 unit)
4. KABEL EXTENTION ( 1 lot)

POWER SUPPLY
and playback with graphical displayBuilt-in MP3 recording
Patent-pending recording buffer
Digital Acoustic Feedback Suppression
Discussion control without operator
Controls up to 150 contribution devices
Built-in monitor loudspeaker

The Control Unit ( CU) is the heart of the CCS Ultro
Discussion System and supplies the power for all delegate and chairman units in the system. The unit
also controls the chairman and delegate unit microphones, as well as
providing connections for audio inputs and outputs.
Functions: Built-in MP3 recording and playback with graphical display
The CU has a built-in recorder to digitally record a discussion to an SD Card. The graphical display shows
the status of the recorder and the accompanying buttons can be used to configure the recorder. As an
option, the recording is only active when a microphone is active. The SD card can be removed from the
CU and processed on a PC for transcription purposes; the recordings can also be retrieved by connecting
a PC to the CU' s USB. The
recordings can be played back to the monitor loudspeaker or to delegate' s loudspeakers. An audible
beep and a flashing LED indicate when the SD Card is almost full and the user needs to replace it with a
new card.
Supplies power for up to 50 contribution units
The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to
connect 25 contribution units to each trunk output, with a maximum system cable length of 100 m (
109.3 yards) .
Provides control for up to 150 contribution units
Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150
contribution units. In this configuration a single CU acts as a master controller for the entire system.
Controls and Indicators : Top

8
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Mains on/ off switch
Graphical display for status information
5 soft buttons for configuration and control of the built-in MP3 recorder
Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This
control also determines the maximum level for the headphone outputs of the contribution units and the
CU.
Microphone mode rotary switch, for setting the number of simultaneously active microphones, and
selecting one of the four operation modes ( plus test mode)
Power on LED
Technical Specifications : Electrical
Mains voltage 100 to 240 VAC 10 % , Current consumption maximum 0.9 A ( 100 VAC)
to 0.3 A ( 240 VAC)
DC supply to contribution units 24 V 1 V ( current limited)
Loudspeaker volume control mute ( 50 dB att.) + 10 steps of 1.9 dB
Limiter threshold level to unit 10 dB above nominal level loudspeaker / headphone
Gain reduction due to number of open microphones ( NOM) NOM 1 dB
Total harmonics Nominal input ( 85 dB SPL) < 0.5, Max. input ( 110 dB SPL) < 0.5
Sample frequency
Recording 32 kHz, Playback 32, 44.1, 48 kHz
Bit rate
Recording 64, 96, 128, 192, 256 KBit/ sec, Playback any bitrate
Compatible conform ID3V2 mp3-tags
Memory card Any SD Card up to 2 Gb ( high speed cards advised) , Standart SD card 1 Gb.

POWER SUPPLY
Discussion control without operator
Controls up to 150 contribution devices
Built-in monitor loudspeaker

The Control Unit ( CU) is the heart of the CCS Ultro
Discussion System and supplies the power for all delegate and chairman units in the system. The unit
also controls the chairman and delegate unit microphones, as well as
providing connections for audio inputs and outputs.

Supplies power for up to 50 contribution units
The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to
connect 25 contribution units to each trunk output, with a maximum system cable length of 100 m (
109.3 yards) .


9
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Provides control for up to 150 contribution units
Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150
contribution units. In this configuration a single CU acts as a master controller for the entire system.

Controls and Indicators : Top
Mains on/ off switch
Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This
control also determines the maximum level for the headphone outputs of the contribution units and the
CU.
Microphone mode rotary switch, for setting the number of simultaneously active microphones, and
selecting one of the four operation modes ( plus test mode)
Power on LED

Technical Specifications : Electrical
Mains voltage 100 to 240 VAC 10 % , Current consumption maximum 0.9 A ( 100 VAC)
to 0.3 A ( 240 VAC)
DC supply to contribution units 24 V 1 V ( current limited)
Loudspeaker volume control mute ( 50 dB att.) + 10 steps of 1.9 dB
Limiter threshold level to unit 10 dB above nominal level loudspeaker / headphone
Gain reduction due to number of open microphones ( NOM) NOM 1 dB
Total harmonics Nominal input ( 85 dB SPL) < 0.5, Max. input ( 110 dB SPL) < 0.5


Mic.CHAIRMAN: 3 unit

Incorporates all functions of the CCS D-ID CCS Delegate Units ( with the exception of the Possible
To Speak functionality/ LED)
Priority button for chairman microphone
Temporary or permanent muting of delegate microphones
Optional chime tone facility for preceding chairman announcements
Modern, unobtrusive styling to match the CCS D-ID CCS Delegate Units
Available with standard or extended length microphone stems

The CCS CM-ID CCS Chairman Units are equipped withenhanced functionality that enables the
user to take the roleof chairman in a conference or meeting.
Functions: Priority button for chairman microphone In addition to the microphone on' button
the chairman units feature a chairman priority' button. When pressed the priority button
causes all currently active delegate microphones to be temporarily or permanently muted.

10
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Temporary or permanent muting of delegate microphones. The chairman priority' button can
be set to mute delegate microphones on a temporary or permanent basis. On the
temporary setting, delegate microphones are muted only as-long as the chairman has the
priority button pressed down. On the permanent setting delegates must reactivate their
microphone after a chairman priority' announcement by pressing the microphone on' button
on their delegate unit. Activation of the permanent mute option is carried out by setting an
internal switch, which can be accessed by removing a small plastic plate on the base of the
chairman unit.
Optional chime tone facility for preceding chairman announcements. An optional chime tone
can be selected to precede chairman priority calls. Activate the chime tone option by setting an
internal switch; this can be accessed by removing a small plastic plate on the base of the
chairman unit.
Standard or extended length microphone stems. The chairman units are available with standard
313 mm ( 12.3 in) .
Controls and Indicators.
Microphone on/ off button
Chairman priority button
Rotary volume control for adjusting headphone volume
Loudspeaker, automatically muted when microphone is on and/ or headphones are
connected
Internal switch for selection of chairman announcement chime tone
Internal switch for temporary or permanent muting of delegate microphones when chairman
priority button is pressed
Microphone has on' indicator ( red LED)
Light ring indicator on microphone stem, lights up red when microphone is on
No Possible-To- Speak functionality and indicator is required because a Chairman Unit can
always switch-on the microphone, no matter the number of delegates speaking.
Interconnections:
1 x 2 m ( 78.7 in) cable terminated with a molded 7-pole circular male connector, for loop-
through interconnection to delegate unit or Control Unit
1 x 7-pole circular female connector for loop-through interconnection to delegate units
2 x 3.5 mm ( 0.14 in) stereo headphone sockets.
Technical Specifications: Mechanical
Dimensions unit without microphone ( H x W x D) 71 x 220 x 140 mm ( 2.8 x 8.7 x 5.5 in)
Height with microphone in horizontal position 134 mm ( 5.3 in) Length of microphone from
mounting surface CSS CM-ID 313 mm ( 12.3 in)
Weight approx. 1 kg ( 2.2 lb) Mounting tabletop ( portable or fixed)
Material ( top) polymer Material ( base) painted metal
Color ( base) charcoal ( PH10736) Color ( top) charcoal ( PH10736)


11
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Mic. DELEGATE: 17 unit

- Unique, patent pending " Possible To Speak " indicator
- Compact, attractive design
- Built-in volume control for headphones
- Microphone with flexible stem and light ring
- Two headphone sockets
- Available with standard or extended length microphone stems

The CCS Dx CCS Delegate Units enable delegates to actively take part in the proceedings. A built-
in microphone allows them to speak to the other delegates, and they can listen to the
discussion using the built-in loudspeaker or ( optional) personal headphones.
Functions
Possible To Speak
A so called Possible-To-Speak' indicator is build-in showing if it is possible to switch on the
microphone. This functionality is shown by a white LED combined with the microphone on'
indicator.
Microphone with flexible stem and light ring
The microphone is mounted on a flexible stem, which is easily adjustable to suit personal
preferences. It also allows two people to use the same delegate unit as they can pull the
microphone towards them when required to speak. Incorporated into the head of the
microphone is a light ring which illuminates red to indicate when the microphone is on.
Built- in loudspeaker
Loudspeaker volume is set centrally at the Control Unit for all delegate units. To prevent
acoustic feedback, the built- in loudspeaker is automatically muted when the microphone
is on.
Two headphone sockets
Two 3.5 mm ( 0.14 in) stereo headphone sockets ( wired for mono) allow two pairs of
headphones to be connected so two delegates can simultaneously use the unit. It is also
possible to connect a tape recorder to one headphone socket, and use the other headphone
socket to listen to the proceedings.
Built-in volume control for headphones
The headphone volume level can be adjusted by means of a thumbwheel on the unit for
maximum comfort.
Compact, attractive design
Featuring modern, unobtrusive styling and finished in charcoal gray these units make a valuable
addition to any venue.
Standard or Extended Length Microphone Stems
The delegate units are available with standard 313 mm ( 12.3 inch) .

12
SPESIFIKASI
TEKNIS
PENGADAAAN SOUND SYSTEM 2014

Controls and Indicators
Microphone on/ off button
Rotary volume control for adjusting headphone volume
Loudspeaker, automatically muted when microphone is on and/ or headphones are
connected
Possible :Speak indicator ( white LED)
Microphone on' indicator ( red LED)
Light ring indicator on microphone stem, lights up red when microphone is on.
Interconnections
1 x 2 m ( 78.7 in) cable terminated with a pole maleconnector for loop-through connection to
other delegate or chairman units, or to a Control Unit
1 x 7 pole circular female connector for loop-through connection to other delegate or
chairman units
2 x 3.5 mm ( 0.14 in) stereo headphone sockets
Technical Specifications : Mechanical
Dimensions unit without microphone ( H x W x D) 71 x 220 x 140 mm ( 2.8 x 8.7 x 5.5 in)
Height with microphone in horizontal position 134 mm ( 5.3 in) Length of microphone from
mounting surface CCS D-ID 313 mm
Weight approx. 1 kg ( 2.2 lb) Mounting tabletop ( portable or fixed) Material ( top) polymer
Material ( base) painted metal Color ( top) charcoal ( PH10736) Color ( base) charcoal (
PH10736)

KABEL EXTENSION CUSTOM UNTUK INSTALASI MIC CONFERENCE.
Setara :

KABEL WARNA HITAM
DILENGKAPI DENGAN JACK 7 PIN WARNA HITAM
TERSEDIA BERBAGAI UKURAN YAITU:
PANJANG 20 METER
PANJANG 10 METER
PANJANG 5 METER
PANJANG 3 METER
PANJANG 2 METER

Você também pode gostar