Você está na página 1de 5

MOAC 70-687 - Configuring Windows 8 Lab Manual

LAB 10
CONFIGURING IP
SETTINGS
THIS LAB CONTAINS THE FOLLOWING EXERCISES AND ACTIVITIES:
Exercise 10.1 Manually Configuring TCP/IP
Exercise 10.2 Creating and Managing a DHCP Scope
Exercise 10.3 Testing Network Connections
Lab Challenge Configuring IP at the Command Prompt

Exercise 10.1 Manually Configuring TCP/IP
Overview

In this exercise, you will configure the IP configuration of a
computer running Windows 8.
Mindset As an administrator, you will have to configure the IP settings
for workstations and servers.
Completion time 20 minutes


Question
1
What is the IPv4 address and subnet mask assigned to the
computer?



MOAC 70-687 - Configuring Windows 8 Lab Manual

Question
2
What is the IPv6 address?



Question
3
By looking at the response from ipconfig, what is the address
of the DHCP server that assigned the IPv4 address to this
computer?



20. Take a screen shot of the Internet Protocol Version 4 (TCP/IPv4) Properties
dialog box by pressing Alt+Prt Scr and then paste it into your Lab 10 worksheet
file in the page provided by pressing Ctrl+V.
[copy screen shot over this text]

Exercise 10.2 Creating and Managing a DHCP Scope
Overview

In this exercise, you will create a DHCP scope and look at the
parameters of a DHCP scope.
Mindset When you need to make changes to the network, including
changing the addresses of DNS servers and such, you can
change the DHCP scope and the clients will automatically get
the IP configuration automatically.
Completion time 15 minutes

Question
4
What is the start and end IP addresses being assigned?



21. Take a screen shot of the DHCP console dialog showing the new created scope
by pressing Alt+Prt Scr and then paste it into your Lab 10 worksheet file in the
page provided by pressing Ctrl+V.

MOAC 70-687 - Configuring Windows 8 Lab Manual

[copy screen shot over this text]

Exercise 10.3 Testing Network Connections
Overview

In this exercise, you will test the network connection and
network connectivity between computers. You will also use
nslookup to get the IP address of a host.
Mindset Network connection problems occur; they are usually caused by
physical problems (such as when a cable is not connected) or by
an IP configuration problem (such as having the wrong subnet
mask or default gateway). As an administrator, you need to
know how to troubleshoot such problems.
Completion time 10 minutes


Question
5
What is the result of executing ping 127.0.0.1?



Question
6
What does this result prove about the computers network
connectivity?



Question
7
What would be the result if you unplugged your computers
network cable before executing the ping 127.0.0.1 command?



MOAC 70-687 - Configuring Windows 8 Lab Manual

Question
8
What is the result of executing ping SVR-DC-A and what
does it prove?



Question
9
What is the IP address of SVR-DC-A?




Question
10
What is the IP address of SVR-DC-A?



5. Take a screen shot of the Administrator Command Prompt window by pressing
Alt+Prt Scr and then paste it into your Lab 10 worksheet file in the page
provided by pressing Ctrl+V.
[copy screen shot over this text]


Lab Challenge Configuring IP at the Command Prompt
Overview

In this exercise, you will perform a written exercise to
demonstrate configuring IP settings using commands.
Mindset As an administrator, you may want create scripts, which contain
commands that you would execute to configure Windows. Some
of these commands may include configuring IP.
Completion time 10 minutes

For this written exercise, answer the following questions.
1. Which command is used to configure the following?
MOAC 70-687 - Configuring Windows 8 Lab Manual

IP Address: 10.2.0.50
Subnet mask: 255.255.255.0
Default Gateway: 10.2.0.20

2. Which command is used to configure the primary DNS server as 10.0.0.50?

3. Which command would you set the computer to use DHCP?

Você também pode gostar