Você está na página 1de 2

Microwave Communication Parabolic Antennas

Front Feed Waveguide Antenna


General Specifications
Input flange FDP70 or FDP84.
Standard antennas have no shield (figure 1), high
performance antennas have cylindrical shield.
Radome is available for high performance antenna.
The radome material of figure 3 is fiberglass.
The radome material of figure 4 is high-strength
compound fabric.
Optionshanger mounting, platform mounting,
114 mounting pipe.
























Gain (dBi) VSWR Polarization Type Dia.
m Low Mid High
3
dB
BW
()
Std Low
F/B
Ratio
dB
Isolation
dB
XPD
dB
Standard Antenna
Single WTB06-144D 0.6 36.1 36.4 36.7 2.4 1.20 1.15 47 -- 30
WTB12-144D 1.2 42.1 42.4 42.7 1.2 1.15 1.10 54 -- 30
WTB16-144D 1.6 44.6 44.9 45.2 0.9 1.15 1.10 56 -- 30
WTB20-144D 2.0 46.6 46.9 47.1 0.7 1.15 1.10 58 -- 30
Dual WTB06-144S 0.6 35.9 36.2 36.5 2.4 1.25 1.20 47 35 30
WTB12-144S 1.2 41.9 42.2 42.5 1.2 1.20 1.12 54 35 30
WTB16-144S 1.6 44.4 44.7 45.0 0.9 1.20 1.12 56 35 30
WTB20-144S 2.0 46.4 46.7 46.9 0.7 1.20 1.12 58 35 30
High Performance Antenna
Single WTG03-144D 0.3 30.5 30.8 31.1 4.7 1.20 1.15 52 -- 30
WTG06-144D 0.6 36.5 36.8 37.1 2.4 1.20 1.15 58 -- 30
WTG12-144D 1.2 42.6 42.8 43.1 1.2 1.15 1.10 65 -- 30
WTG16-144D 1.6 45.1 45.3 45.6 0.9 1.15 1.10 67 -- 30
WTG20-144D 2.0 47.0 47.3 47.5 0.7 1.15 1.10 69 -- 30
Dual WTG06-144S 0.6 36.3 36.6 36.9 2.4 1.25 1.20 58 35 30
WTG12-144S 1.2 42.4 42.6 42.9 1.2 1.20 1.12 65 35 30
WTG16-144S 1.6 44.9 45.1 45.4 0.9 1.20 1.12 67 35 30
WTG20-144S 2.0 46.8 47.1 47.3 0.7 1.20 1.12 69 35 30
Note: If radome is made of fiberglass, then gain attenuation is 0.5dB, add to antenna VSWR 0.05; if radome is made of nylon
fabric, then gain attenuation is 0.2dB, add to antenna VSWR 0.02.

14.4-15.35 GHZ Microwave Antenna Speification
http://www.probecom.cn
Copyright2008 Probecom
Mechanical Specifications
Hanger mounting adjustment range azimuth360 fine azimuth adjustment5 fine elevation adjustment5
Platform mounting adjustment range fine azimuth adjustment5 fine elevation adjustment5
Normal wind load 35m/s
Wind survival 55m/s
Operating temperature -40+55
Integrated Antenna
Gain(dBi) VSWR
Pol. Type
Dia.
m Low Mid High
3 db
BW
()
Std Low
F/B
ratio
dB
XPD
dB
Standard antenna
WTB06144D 0.6 36.1 36.4 36.7 2.4 1.20 1.15 47 30
Single
WTB12144D 1.2 42.1 42.4 42.7 1.2 1.15 1.10 54 30
High performance antenna
WTG03144D 0.3 30.5 30.8 31.1 4.7 1.20 1.15 52 30
WTG06144D 0.6 36.5 36.8 37.1 2.4 1.20 1.15 58 30 Single
WTG12144D 1.2 42.6 42.8 43.1 1.2 1.15 1.10 65 30
The entire antennas are single polarized feed.

Fast and easy installation is made possible.
Standard antennas have no shield, while high performance
antennas have shield and radome.
Optionshanging mount, platform mount, 114 mounting pipe.
The characteristics of integrated antennas
A cost-effective solution for microwave communication
system.
System attenuation reduced, integrated antenna range in
diameter is smaller.
Enhanced system specifications

http://www.probecom.cn


Probecom Microwave Technology Co.,Ltd
ADD:20
Th
Floor,Building C,Jin Qiao International Plaza,50Keji Road,Hi-Tech Development Zone, XiAn
Tel0086-29-83115011/3115022 / Fax:0086-29-83115033 E-Mail:sales@probecom.cn
Copyright2008 Probecom

Você também pode gostar