Escolar Documentos
Profissional Documentos
Cultura Documentos
L. Akanji
Objectives
The purpose of this exercise is to demonstrate the capability of surfactant to emulsify
oil and water into an emulsion (a new phase), thereby causing desaturation and
potentially enhancing recovery. The objectives of this exercise are therefore:
1) to simulate recovery by surfactant injection using REVEAL software package.
2) to evaluate the effectiveness of the technique.
3) to study the impact of reservoir water salinity (groups C1, C3) or polymer
shear rate (groups C2, C4).
Your tasks
The model you will be working on is a simple reservoir model with one producer and
one injector (both horizontal) wells. These two wells are complemented by two
additional vertical injectors.
The following step by step procedure can be used in order to setup such a model:
L. Akanji
Introduction
Method
Results/Discussion
Conclusions
Submission instruction
1) Deadline for submission of report: Wednesday 19th Nov. at NOON
2) Your report should be no more than 10 pages
3) Method of submission: ONE hard copy + electronic submission
a. EG50HI (MEng)
ONE hard copy: submission box outside the Undergraduate Office
(FN192)
Electronic submission via MyAberdeen: Continuous Assessment >
EG50HI TurnitIn submission
b. EG501M (MSc)
ONE hard copy: Postgraduate office (FN188)
Electronic submission via MyAberdeen: Continuous Assessment >
EG501M TurnitIn submission