Escolar Documentos
Profissional Documentos
Cultura Documentos
SECTION 1: VOCABULARY
1 Choose the correct option.
1
When the ejection system is triggered, the seat is disabled/propelled away from the plane.
The optimum/approximate angle of the holes is 30. This definitely gives the best results.
The recoil/pulse from the gun reduced its accuracy because it made it impossible to keep the
gun steady.
9
2 Complete the sentence with a word formed from the word in capitals at the end.
10
problem.
BREAK
11
12
The leg __________ holds the crew members in the seat. RESTRAIN.
13
14
15
SECTION 2: LANGUAGE
3 Put the verbs in brackets into the most appropriate form.
I (16) __________ (work) in this company for the last two years. Recently we
(17)
__________ (have) a lot of problems with the production line. We (18) __________ (buy) new
equipment six months ago and since then the machines (19) __________ (break) down three times.
The service engineers (20) __________ (come) to repair them two weeks ago, but they (21)
__________ (stop) working again. At the moment, all the workers (22) __________ (stand) around
waiting for the engineers to come again. I (23) __________ (call) them half an hour ago but no one is
available for the next four hours. Every year we (24) __________ (pay) a lot of money for the service
contract and we expect better service than this. Unfortunately, we (25) __________ (not have) the
expert knowledge to repair them ourselves. If we had that knowledge there (26) __________ (not be)
a problem.
/11
4 Choose the correct option (a-d).
27
28
d) not as
The standard gun has a __________ barrel than the new one.
a) wide
29
b) wider
c) more wide
d) less wide
__________ there were problems with the old system, there are none with the new
a) But
30
c) as
b) As soon as
c) Whereas
one.
d) Once
The new equipment cost much more __________ it works much better.
a) whereas
SECTION 3: READING
5 Read the text and decide if these statements are true (T), false (F) or not given (NG)?
31Model rockets are well-made.
32 Its possible to have a camera on some models.
33 Placing fins in the wrong position can affect stability.
________
________
________
34 The bigger the engine, the higher the rocket will go.
________
________
________
________
________
________
body and which stabilize the rocket in flight; a shock cord which attaches it to the body and a
parachute to aid in the recovery of the rocket. Designing a rocket requires some considerable
knowledge so most people tend to start with model kits, which have already designed and tested the
rocket for stability and safety.
Some model rockets are 17 centimetres, and some can be as tall as 2 or 3 metres. These rockets can
also perform a variety of functions. For example, there is one that can take a picture at the apex of its
flight and there are several that allow you to place a small item in a payload bay. Most rockets,
however, just go through four phases, launch, flight, ejection, and landing.
Before assembling the rocket you need to make sure that the fins and launch lug are accurately
placed. The fins are the hardest and most important steps of the rocket building process because
without them your rocket will be unstable when flying. The stability depends on how all the forces act
on a model rocket. There are several categories of stability, which have to be taken into account:
stable; neutrally stable; unstable and dynamic instability.
Next you need to make sure you have the right engine for your rocket size. Model rockets obviously
come with this, but if you are building your own from scratch it is essential that your engine is not too
powerful for the size of your rocket, otherwise you will lose or damage it. Rocket engines are filled
with solid rocket fuel which is ignited by an electrical impulse from a detonator. After burning all of
the rocket fuel, the engine fires a charge into the rocket body that blows the nose cone off and enables
the recovery system.
The engine block is housed in the engine mount in the tube. A typical engine mount kit consists of
three pieces: the engine tube which houses the model rocket engine; the centering rings
which keep the engine tube centred in the body tube and the engine hook to keep the engine in
place. A basic model rocket engine mount will only have an engine hook as it uses the body tube
of the rocket as the engine tube for the model rocket engine.
The launch lugs, small cylindrical tubes attached to the body tube of a model rocket, allow the
rocket to be guided along the launch rod during the rocket launch. Finally the nose cone has to be
attached to the model rocket body tube by an elastic shock cord. This is so that when the model
rocket engine ejects the nose cone from the rocket, the cone is not lost. Attached to the nose cone is
a parachute or streamer which, when the nose cone is ejected, deploys the recovery system. The
nose cone therefore has to fit quite loosely into body tube because if it becomes stuck the
recovery system will not work.
After having built your rocket, you are now ready to launch using the launch pad and a detonator. Its a
good idea to insert several sheets of recovery wadding into the body tube to protect the recovery
device from the ejection charge. When you have packed the recovery device and replaced the nose
cone on the rocket, the launch lug is slipped over the launch pads metal guide rod. The igniter is then
secured so that it touches the propellant inside of the rocket engine. Finally, the detonator lead clips
are attached to the igniter to form a complete circuit. For safety reasons, you need to be a safe distance
away from the pad. So make sure that the detonator has a long lead.
/10
SECTION 4: WRITING
6 Use the notes to write a short article for your company (ABJ Seatworks) magazine about the
new Technical Director. There are two marks per item.
42/43 Jack Philips / Date of birth: 16/05/82 / Place of birth: Australia
Work experience
44/45 January 2008 Present/ Technical Manager/ ABJ Seatworks/ responsibilities: design and build
ejection systems for aircraft
46/47- 2004-2007 / Technical Supervisor/KLG Holdings/responsibilities: organise work schedule for
team of 6 design technicians, supervise design work
Education
48/49- 1998-2001 / apprentice with Kork Design - Brisbane
50/51- 2001-2004 University of Queensland, degree course: technical design
41/42_________________________________________________________________________
___________________________________________________________________________
43/44 __________________________________________________________________________
___________________________________________________________________________
45/46_________________________________________________________________________
___________________________________________________________________________
47/48_________________________________________________________________________
___________________________________________________________________________
49/50_________________________________________________________________________
_____________________________________________________________________________
/10
SECTION 5: LISTENING
Track 2
7 Listen to the recording twice and write and complete the notes with NO MORE THAN TWO
WORDS.
NEWS REPORT
51
52
53
54
55
When launched, the rocket went up then flew __________ before falling back.
56
57
58
59
60