Escolar Documentos
Profissional Documentos
Cultura Documentos
ANNEXURE 1
Design Clinic
Scheme for
MSME
Declaration by Design Student should be attached as soft copy along with the project
proposal.
Design project proposal must be submitted online in editable DOC formats to the
mentioned details on website.
2.
Background study:
Quality of a garment is very important for the apparel industry, bad quality leads to
inflation of the cost and time, quality improvement is the initiative which has to be
taken by the middle management and the higher management but the low level
management is also considered because the actual deployment of the process is carried
out by the hands of lower management. To improve quality this project will leads to the
preliminary predictions of the quality issues before hand by implementing portable
presser measuring device to ensure the proper presser has to be maintained as per the
different fabrics.
Presser foot plays an important role in stitching the garment and the amount of the
presser required to stitch various types of fabric is essential, to rectify these problems
beforehand this device will be very important for the process also there is no device
available to measure presser for the fabrics in the market for apparel industry and the
devices which are available are very costly, due to the cost factor these devices are not
supported by the apparel industrialist.
Need of the project
Presser foot is an important part of the sewing process to maintain quality issues.
Pressure foot presser adjustment is very subjective in nature practically. Whenever
there is a need to change presser operator generally screw the presser foot bar to adjust
presser which leads to the increase in the allowance rate during the process.
Also the lack of such customized devices are not available in the market to measure
presser, if available they are very expensive.
3.
Applicant Information:
011-26542193
Yes
Arun Kumar
Date of Birth
Address:
H.No.502, Uklana Mandi, Hisar, Haryana (pin code-125113)
Mo. No.
Email :
+91 9015914029
er.arun003@gmail.com
Discipline
Semester /Year
Yes
Fashion
ARUN KUMAR
Contact No. +91-9729164315
+91-9015914029
E-Mail Id er.arun003@gmail.com
Objective
I am seeking to work with a Progressive Organization that gives me the
Opportunity to apply My knowledge, skills & abilities & offers a good Career.
Professional Qualification
Academic Qualification
th
Practical Training
Technical Skills
Basic knowledge of CAD design.
Basic knowledge of Computer system.
Knowledge of Operating System Window 7/8.
Work Experience
Project Work
Dyeing behaviors of Soya and Bamboo fabrics and compares their properties with
Cotton and Wool respectively.
To find out the total number of contaminations presents in a cotton bale.
Line balancing in Apparel Production to increase the productivity and quality.
Sewing time loss analysis in Apparel Production line.
Hobbies
Listening Music.
Chess.
Personal Profile
Date of Birth
Sex
Marital Status
Father Name
Address
:
:
:
:
:
3 July,1988
Male
Single
Sh. Ishwar Singh
H.No.502, Uklana Mandi, Hisar, Haryana, India.
Nationality
Indian
Language known
English, Hindi
I hereby declare that the above written particulars are true to the best of my knowledge
and Belief.
Article I.
Declaration
Date:
ARUN KUMAR
Designation
Assistant Professor
Department
Contact details :
Tel No. : 011-26542164
Mo. No. + 91 9717389323
Email : deepak.panghal@nift.ac.in; panghaldeepak@gmail.com
4.
Scope of work:
i)
While stitching a garment, in most operations variable pressure is required depending upon
fabric to fabric.
The aim is to design an attachment for the pressure foot pressure measurement to rectify or
predict quality defects occurs during sewing process. Device will consists of pressure
attachment and pressure meter, also to prepare a complete manual consisting of different
varieties of fabric with its pressure readings.
Expected diagram
ii)
Mode of Operation:
1)
2)
3)
4)
5)
Activities
Phase 1
Phase 2
Development of proto-type.
Phase 3
Duration
Deliverables
1.5 month
1.5 month
Pressure
meter
1 month
Results
v) Final Deliverables :
1) Reduced total production time due to multiple operations being carried out at the
same time.
2) Less start up time
7
Expense Head
1.
Expense Details
Project Stipend
60,000
(For student-team)
Travel and
Conveyance
expenses *
Stationery
Expenses*
Prototype and
modelling*
Documentation
Charges for one
copy (DCS-MSME)*
Total
10,000
1. Travelling to different industries in
NCR for primary research.
2. Travelling for procurement and
assembling of parts.
5,000
Books, internet, library charges,
documentation printouts, and other
stationary.
Display board
Controller
Prototype of pressure measurement
Signal transmitter
5,000
Printouts, binding and presentation
according to MSME formats.
Rs.
10
Section 1.01
I declare that:
(i)
(ii)
(iii)
(iv)
The facts stated in this application and in accompanying materials with regards
to the proposed student project are to the best of my knowledge, true complete
and accurate and
no materials facts have been withheld or distorted.
(v)
I/We have not given any monies, rebates, discounts, refunds, liquidated
damages or any other payment, whether in cash or in kind, to the applicant or its
directors or shareholders or any other person related to the aforesaid persons, in
connection with the proposed student project, and there is no intention to give
such monies, rebates, discounts, refunds, liquidated damages or payments.
(vi)
12
13