Escolar Documentos
Profissional Documentos
Cultura Documentos
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
ABOUT US
IT OPERATIONS
SERVER MANAGEMENT
TECHNICAL SUPPORT
WEB SERVICES
CLOUD SOLUTIONS
2 1
Search
Home Windows Servers DHCp server installation and configuration on a 2008 windows server
by: jdavid
No Comment
Follow 40 people are following Juno David Antony K. Be the first of your friends.
Send
Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server
information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your
network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services
like the Windows Health Service and Network Access Protection (NAP)
Installing DHCP Server in Windows Server 2008:
Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a role of Windows Server 2008 not a windows component as it
was in the past.
To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your
networks IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your
default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions
you will want to create.
To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager
Roles Add Roles.
http://servermanagement24x7.com/dhcp-server-installation-and-configuration-on-a-2008-windows-server.html
1/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
Find us on Facebook
Server Manageme
Follow
+1
+ 27
http://servermanagement24x7.com/dhcp-server-installation-and-configuration-on-a-2008-windows-server.html
2/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP
Email *
address.
At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install
DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation.
Subscribe!
On the other hand, you can optionally configure your DHCP Server during this part of the installation.
In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope.
I was shown my network connection binding and asked to verify it, like this:
Chat with us
Like
Windows Server
Administration Interview
Questions
In: Application Support, Interview Questions, Windows
8, Windows Servers
What the wizard is asking is, what interface do you want to provide DHCP services on? I took the default and clicked Next.
Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next.
3/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
In: Cloud Solutions, Microsoft Azure, Microsoft HyperV, Server Management, Server Security, System
Administration, Team Management, Time Management,
Web hosting, Web Services, Windows Servers
No
comments
CloudStack vs OpenStack
In: Cloudstack, Openstack
Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100
to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBCLocal, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of
192.168.1.1, type of subnet (wired), and activated the scope.
4/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
cpanel server
In: Linux, PHP
No comments
Sample Tests []
No
comments
Apachetuner.sh Apache
Performance Tuning Script
In: Apache, Performance Optimization
No
comments
http://servermanagement24x7.com/dhcp-server-installation-and-configuration-on-a-2008-windows-server.html
5/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
Apachetuner.sh is one of the best available apache
performance tuning scripts available in the internet.
This is mostly compatible with the Redhat and
CentOS version / flavours of Linux Operating System.
This script helps you to understand the current usage
of your apache server, and then tune / optimize the
server accordingly [crayon54448ba15e138582108336/] Link to []
No comments
TERMS OF USE
TOS - The information provided in this website is only
for the general information purposes. The
information is provided by the "Server Management
24x7" Technical community members and while we
try to ensure that the information is up to date and
correct, we make no representations or warranties of
any kind, express or implied, about the accuracy,
reliability, suitability or availability with respect to the
website or the information, products, services, or
related graphics contained on the website for any
purpose. Any reliance you place on such information
is therefore strictly at your own risk.
http://servermanagement24x7.com/dhcp-server-installation-and-configuration-on-a-2008-windows-server.html
6/11
10/20/2014
DHCp server installation and configuration on a 2008 windows server | Server Management 24x7 !
ShareThis
Link to this post!
Send
Follow 40 people are following Juno David Antony K. Be the first of your friends.
Related Posts:
1. Managing DHCP Server in Server 2008
2. How do I Install and configure a DNS server in Windows Server 2008?
3. Enable Telnet In Windows Server 2008
4. How to Install PHP on IIS 7 for Windows Server 2008
5. How to Install PHP on IIS 7 for Windows Server 2008
6. Step By Step Windows Server 2003 Installation Guide
http://servermanagement24x7.com/dhcp-server-installation-and-configuration-on-a-2008-windows-server.html
7/11