Escolar Documentos
Profissional Documentos
Cultura Documentos
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000090
2. Cakra Steel (Grup Argo Manunggal)
PT Jakarta Cakratunggal Steel Mills, a domestic owned company founded in 1989. The factory
occupies an area of 14.8 hectares was built in three phases. Cakra Steel since installed and
commissioned all its product units has successful to penetrate both domestic and international market.
Cakra steel also a member of the Argo Manunggal Group, lead by Mr The Ning King, a local
chinese indonesian whose main business is in textile manufacturer.
Address : Jl. Raya Bekasi Km 21-22, Cakung - Jakarta Timur
Telp : +62 21 4605987
www.cakrasteel.co.id
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000115
3. Pulogadung steel
Address : Jl. Pulo Lentut No 3 Kawasan Industri Pulogadung , Cakung - Jakarta Timur
Telp : +62 21 4613585
Email : mktpgs@yahoo.com
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000179
4. Master Steel
The Master Steel Mfc was established in 1972 as one of the pioneers in steel-making and rolling in
Indonesia. The first steel plant was initially set up as a green-field project on twelve hectares of land in
Pulogadung, East Jakarta. As one of the earliest industrial estates, Pulogadung lies in close proximity to
the city center as well as to Tanjung Priok port, making it the most strategic industrial area in Jakarta.
Address : Jl. Pangeran Jayakarta No 107, Jakarta Pusat
Telp : +62 21 639 3608
Fax : +62 21 659 7766
Jl. Raya Bekasi Km 21 Pulogadung - Jakarta Timur
Telp ; +62 21 460 6188
Fax : +62 21 460 6185
www.themastersteel.com
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000541
5. Growth Steel
The Growth Steel Group was founded in 1970 with the establishment of the first company, PT Growth
Sumatra Industry. The company, an integrated steel mill producing long steel products from scrap
metal feedstock, quickly grew and provided the foundations for a diverse group of companies that now
delivers products worldwide.
The Growth Steel Group supplies steel products for construction, mining and re-rollers throughout the
Middle East, South East Asia, Australia, Africa, South America.
PT. Growth Sumatra Industry produces billets, reinforcing bars, weld mesh, angle bars and bright steel
shafting.
PT. Growth Asia is one of the largest foundries in South East Asia and primarily produces; mill liners
for the mining industry, steel and ductile iron rolls for the steel and rubber industries and extended-life
screws for the palm oil industry.
Sea food products are shipped to Japan and palm oil products to Europe, as well as supplying the
local market in Indonesia.
The Group is still expanding and the latest venture is the building of the first BOF in Indonesia for
producing pig iron.
Address : Jl. K.L. Yos Sudarso Km 10.5, Medan - North Sumatera
Telp : +62 61 6850206
www.growthsteel.com
www.ptgrowthasia.co.id
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000087
6. Citra Baru Steel
Address : Kawasan Industri Modern II Kav Q/7-Q-8, Cikande, Kab. Serang, Banten
Telp. : +62 254 8480840 Fax. : +62 254 404309
Email : handoko@cbs.co.id
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0001200
7. Power Steel
PT Power Steel Indonesia is a national steel industry company founded in 2007 with occupying 30
acres of land located in Industrial Area Millenium Cikupa South Tangerang, with an installed capacity of
500,000 MT per year, consisting of production of Iron Concrete / Iron Profiles of 240,000 MT per year and
the production of Iron billet 260,000 MT / year.
Address : Jl. Syech Nawawi, Kawasan Millenium Industrial Estate Blok B, Curug - Tangerang
Telp : +62 21 5994948
Fax : +62 21 5994958
www.powersteel.co.id
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0001092
8. Tobu Steel
PT. Tobu Indonesia Steel was formely set up as a foreign investment company (PMA 1973) with
Nichimen Corp./Tobu Seitetsu of Japan as the foreign patners. Afterwards, in 1986 it changed into a
domestic invesment company (PMDN) and affiliated with Krakatau Steel Group, an integrated state owned
Steel Producer.
PT. Tobu Indonesia Steel manufactures plain round and deformed steel bar for concrete reinforcement,
with an annual capacity of 120.000 tons.
www.haniljayasteel.com
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000092
11. Inter World Steel Mills
Owned by Metro Concord International, company from England.
Address : Jl. Pangeran Jayakarta 131 A/44-45, Jakarta Pusat
Telp : +62 21 6397070
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000107
12. Ispad Indo
PT Ispad Indo was established in Indonesia in 1976 by Laskmi Mittal. The company was set up
as a 60,000 tpa, for rolling. Today, Ispad Indo has an annual production capacity excess of 700,000
tons.
The company manufactures a wide range of low and high carbon grades of billets, wire rods and
bars using approximately 65% scrap and 35% DRI/Pig Iron. The mix varies according to the grade of
steel produced.
www.ispatindo.com
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000114
13. Jatim Taman Steel
PT. Jatim Taman Steel founded by Siddhartha family in 1970 with production at that time was
2,000 tons per month and a capacity of 25,000 per year.
The company at this time intend to continue to advance the capabilities of workers with training
and other learning process to improve their skills. Installed capacity at the moment is 10,000 per
month and 120,000 per year.
The company later on in 2009 being acquired by Indospring Group, Tbk.
Address : Jalan Raya Taman, Sepanjang Sidoarjo 61257
Telp : +62 31 7881139
www.jts.co.id
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000121
14. Jakarta Steel Megah Utama
Address : Jl Raya Bekasi Km 21-22 , Pulogadung - Jakarta Timur
Telp : +62 21 4602836
http://steelindonesia.com/main.asp?cp=company_detail&id=CMP0000117
15. Krakatau Steel
In the era of 1960, President Soekarno launched Trikora Iron Steel Project as a foundation of firm
ntional industries. Ten years ahead, on 31 August 1970, PTKrakatau Steel (Persero) was established by
utilising materials of Trikora Iron Steel Project such as steel wire mill, steel bar mill and steel section mill
plants. In 1977, President Suharto initiated the firt operation of the largest steel producer in Indonesia.
Krakatau Steel, the company engaging in the steel industry, has shown its significantdevelopment. In
less than ten years, the company has added its production facilities such as Sponge Iron Plant, Steel Billet
Plant, and Wire Rod Plant, as well as infrastructure facilities of electricity power and Water Treatment
Plant, Cigading Special Port and telecommunication system. This development leads PT Krakatau Steel to
become the only integrated steel company in Indonesia.
Address : Gedung Krakatau Steel 4th fllor, Jl Gatot Subroto Kav 54, Jakarta Selatan
Telp : +62 21 5221255
Fax : +62 21 5200876
www.krakatausteel.com
http://www.steelindonesia.com/main.asp?idcat=000&cp=company_detail&id=CMP0000133
7204.21.00.00
7204.29.00.00
7204.30.00.00
7204.41.00.00
7204.49.00.00
7204.50.00.00
Weight (Ton)
2009
1,599,155
2010
1,787,949
2011
2,401,920
2012
2,101,388
402,125
Informasi yang kami kumpulkan dari beberapa pabrikan penerima besi tua, ditemukan beberapa klasifikasi
besi tua dan harga yang berbeda, yang disesuaikan dengan kapasitas dapur peleburan, letak / lokasi
pabrikan serta penilaian di internal pabrikan. Semoga member scrap kami lebih dapat mengerti dan
mengenal kategori-kategori yang berlaku di pasaran besi tua saat ini.
Di Indonesia ada pengelompokan dan penamaan sendiri yang sudah dikenal luas oleh masyarakat, kelas
atau kelompok itu diantaranya :
RANTAI
RODA KERETA
BESI SIKU
BLOK MESIN
Besitua Kelas B
tua yang ada di kelompok ini memiliki tebal minimal 3 - 5 mm dan jenis barangnya atara lain :
Plate tipis, potongan plate, velg mobil, sisa pemotongan coil.
Dan biasanya pihak pabrik akan menerima dalam ukuran antara 50 - 180 cm.
Kondisi barang tidak terlalu banyak karat atau lapisan cat / chrome.
Beberapa contoh besi tua kelas B bisa dilihat ditabel bawah ini :
VELG MOBIL
PLAT TIPIS
SISA SLITTING
POTONGAN PLAT
Besitua Kelas C
Besi tua yang ada di kelompok ini memiliki tebal minimal 2 - 3 mm dan jenis barangnya atara
lain : Kawat seling, seng pabrik, paku, plat body mobil bekas, drum oli.
Dan biasanya pihak pabrik akan menerima dalam ukuran antara 50 - 180 cm.
Kondisi barang tidak terlalu banyak karat atau lapisan cat / chrome.
Beberapa contoh besi tua kelas C bisa dilihat ditabel bawah ini :
KAWAT SLING
SENG PABRIK
PAKU/ SKRUP
MOBIL PRESS
Besitua Kelas D
Besitua yang ada di kelompok ini memiliki tebal minimal 1 - 2 mm dan jenis barangnya atara
lain : sisa serutan/bubutan, kaleng susu, seng berkarat, kawat halus, velg sepeda.
Dan biasanya pihak pabrik akan menerima dalam ukuran antara 50 - 180 cm.
Kondisi barang tidak terlalu banyak karat atau lapisan cat / chrome.
Beberapa contoh besi tua kelas D bisa dilihat ditabel bawah ini :
BUBUTAN KALENG
KALENG
KALENG PRESS
SENG
Besitua Kelas A1
Merupakan Besi tua yang mempunyai tebal 5 mm keatas yang di campur-campur bentuk nya dan
mempunyai zat non besi ( cat, kroom, dll ) sebesar dibawah 1 %.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm.
Beberapa contoh besi tua kelas A1 bisa dilihat ditabel bawah ini :
Besitua Kelas A2
Merupakan besi tua dan dikatakan kelas A2 jika dalam satu muatan besi terdapat besi padat yang
kurang dari 5 mm dan kotoran zat non besi berkisar antara 1% - 2%.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm.
Beberapa contoh besi tua kelas A2 bisa dilihat ditabel bawah ini :
Besitua Kelas A3
Merupakan besi tua dan dikatakan kelas kelas A3 juga merupakan besi padat yang berkisar antara
3 5 mm, disini dikatakan A3 karena zat karat yang terlihat banyak sekitar 20 persen dari permukaan
besi tua dan biasanya masih terdapat kotoran yang cukup signifikan terlihat dengan mata.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm.
Beberapa contoh besi tua kelas A3 bisa dilihat ditabel bawah ini :
Besitua Kelas B1
B1: sering di sebut dengan kabin super merupakan besi tipis antara 2 3 mm dan mengadung
unsur non besi sekitar 1%.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm. Dan kondisi tidak
dalam press lebih baik.
Beberapa contoh besi tua kelas B1 bisa dilihat ditabel bawah ini :
Besitua Kelas B2
B2: kelas ini diklasifikasikan sebagai besi tipis yang mempunyai ukuran antara 1 2 mm jika
terdapat lapisan cat di permukaannya dan zat karat yang bekisar 2%.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm. Dan kondisi tidak
dalam press lebih baik.
Beberapa contoh besi tua kelas B2 bisa dilihat ditabel bawah ini :
Besitua Kelas B3
B3 : kelas B3 merupakan besi tipis yang berukuran kurang lebih sama dengan B2 namun pada
kelas ini besi tipis tersebut banyak mengandung zat karbon seperti per ( Spring bet ), dan seng pabrik
yang berukuran lebar, atau memiliki kotoran yang berkisar 3%, kawat.
Dan biasanya pihak pabrik akan menerima dalam ukuran maksimal 1000 mm. Dan kondisi dalam
press lebih baik dan tidak terlalu banyak kotoran non logam yang melekat.
Beberapa contoh besi tua kelas B3 bisa dilihat ditabel bawah ini :
Besitua Kelas KL
KL: adalah kelas kaleng di katakan kelas kaleng karena pada semua bagian permukaan masih
menempel seperti cat, krom, kertas, dan cat, dll.
Curah dan press diterima oleh pabrikan, tetapi checker akan memeriksa ulang kondisi kaleng
tersebut.
Beberapa contoh besi tua kelas KL bisa dilihat ditabel bawah ini :
2. White Goods
Major household appliances including stoves, fridges, freezers,
clothes washers, dryers & dish washers.
5. E.C. Briquettes
E.C. Briquettes shall contain compressed oil filters and shall have a
minimum weight density of 75 lb./cubic foot.
7. No.1 HMS
No.1 HMS shall consist of clean iron & steel with a minimum
thickness of 1/4", and a maximum size of 60"x24", material
handling compatible to feed a furnace charge box.
This grade may include ISRI code 200.
of
non-magnetic
2. Angle Iron
3. Plate Steel