Escolar Documentos
Profissional Documentos
Cultura Documentos
50
Digital X-ray Total Solution
Zenis
Operation manual
(Version 2.5)
Zenis Software_Ver2.50
Digital X-ray Total Solution
Contents
I. Introduction .............................................................................................................................................. 4
1.1 Introduction of Zenis Software...................................................................................................... 4
1.2 Using Mouse ............................................................................................................................... 5
II. Window Structure .................................................................................................................................... 6
2.1 Mode Bar & Menu Bar ................................................................................................................. 7
2.2 Main Image Window .................................................................................................................. 11
2.3 Thumbnail Window .................................................................................................................... 11
III. Tool Box ............................................................................................................................................... 12
3.1 11 ........................................................................................................................................... 13
3.2 2 x 2 .......................................................................................................................................... 13
3.3 3 x 3 .......................................................................................................................................... 14
3.4 Select ........................................................................................................................................ 14
3.5 Zoom ......................................................................................................................................... 15
3.6 Pan ........................................................................................................................................... 16
3.7 Pencil ........................................................................................................................................ 17
3.8 Palette ....................................................................................................................................... 17
3.9 Magic Glass............................................................................................................................... 18
3.10 Angle ....................................................................................................................................... 19
3.11 Ellipse ...................................................................................................................................... 20
3.12 Arrow....................................................................................................................................... 21
3.13 Polygon ................................................................................................................................... 22
3.14 Text ......................................................................................................................................... 23
3.15 Distance .................................................................................................................................. 24
3.16 Calibration ............................................................................................................................... 25
3.17 Fit ............................................................................................................................................ 26
3.18 Invert ....................................................................................................................................... 26
3.19 CW (Clockwise) ....................................................................................................................... 27
3.20 CCW (Counterclockwise) ......................................................................................................... 27
3.21 Horizontal ................................................................................................................................ 28
3.22 Vertical .................................................................................................................................... 28
3.23 L/R .......................................................................................................................................... 29
3.24 Reset ....................................................................................................................................... 29
3.25 Palette ..................................................................................................................................... 30
3.26 Filter ........................................................................................................................................ 31
Zenis Software_Ver2.50
Digital X-ray Total Solution
Zenis Software_Ver2.50
Digital X-ray Total Solution
I. Introduction
1.1
Field of
Application
S/W Version
Improvement of Image
Enlargement of Image
Main
Function
CPU
OS
Zenis Software_Ver2.50
Digital X-ray Total Solution
1.2
Using Mouse
The mouse is a manual device that moves a pointer, which is used to select objects on the screen. The
mouse is a manual device that moves a pointer, which is used to select objects on the screen.
As the mouse is moved, the pointer follows in the same direction, allowing the user to navigate
through windows, menus and images. The mouse is used to perform five functions as
followings.
Left-Button Click
: This is used to select menu, image and to activate function from icons.
Right-Button Click
Double Click
Left-Button Drag
: Rolling up and down the mouse wheel. Scroll is activated in main image
window and thumbnail window and used to see another images. (This is only available
when you use the wheel mouse.)
Zenis Software_Ver2.50
Digital X-ray Total Solution
4
2
5
Mode Bar: Mode Bar displays the name of mode.
Menu Bar : Menu Bar contains the menus used to access commands corresponding to
mode.
Tool Box : Tool Box contains the icons for the image control.
Main Image window : Main Image Window is the large area where images and/or archive
data are displayed.
Thumbnail Window: Thumbnail Window shows thumbnail(s) images of selected patient.
Zenis Software_Ver2.50
Digital X-ray Total Solution
2.1
Zenis Software_Ver2.50
Digital X-ray Total Solution
(1) Exposure Mode : Exposure Mode contains Registration, LIH, DICOM Server, Print, Modify
Information, Delete Image, Close Patient, and Shutdown.
1) Registration
: Enrolling patient
3) DICOM Server
4) Print
5) Modify Information
6) Delete Image
: Deleting image
7) Close Patient
8) Shut down
Zenis Software_Ver2.50
Digital X-ray Total Solution
(2) Archive Mode : Archive Mode contains Search , Open patient, Delete Patient, DICOM Server,
Modify Information, Convert/Export, Import patient, Insert images and Shutdown.
1) Search
2) Open Patient
3) Delete Patient
4) DICOM Server
5) Modify Information
6) Convert/Export
7) Import Patients
8) Insert images
9) Shutdown
Zenis Software_Ver2.50
Digital X-ray Total Solution
(3) Viewer Mode : View Mode contains DICOM Server, Print, Modify Information, Convert/ Export,
Delete Image, Close patient, and Shutdown.
1) DICOM Server
2) Print
5) Delete Image
: Deleting image
6) Close Patient
7) Shutdown
10
Zenis Software_Ver2.50
Digital X-ray Total Solution
2.2
The Main Image window shows the image and information of selected patient.
Image
Patient Information : Patients Name, ID and Date.
Window Level Status
2.3
Thumbnail Window
Thumbnail window shows the thumbnails images of a patient. Thumbnail images are shown in
screen up to maximum 7 images. If the number of images is greater than 7, the left-right arrow
button is activated and user can use it to see other images.
The image is outlined when it is selected, and the original image is presented on the main image
window.
11
Zenis Software_Ver2.50
Digital X-ray Total Solution
12
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.1
11
3.2
2x2
13
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.3
3x3
3.4
Select
14
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.5
Zoom
4. Click left-button and drag the mouse on the image to adjust the size by Zoom function.
Zoom in drag mouse upward on the image
Zoom out - drag mouse downward on the image
15
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.6
Pan
This function is used to move the image to center a feature of interest in the main image window.
To move an image within the frame:
1. Select an image of patient to be panned.
2. Click the Pan icon on the tool box.
3. Move the mouse pointer to the main image window and the mouse pointer takes the
shape of a hand.
4. Press the left-button of a mouse at a point and drag the image to the desired position
Pan image
Pan image
Pan image
Pan image
16
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.7 Pencil
This function is used to write or draw pictures on the image like a pencil in the main image
window.
Iit will be B/W line when the monitor displays only B/W.
3.8 Palette
17
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.9
Magic Glass
4. Click on the detail in the image that the user wants to enlarge. The image around the
mouse pointer is enlarged.
To exit the Magic Glass, click another icon on the tool panel
18
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.10
Angle
This function is used to measure the angle among three points over an image. When the user
completes drawing an angle, the value of the angle is computed and presented automatically.
To measure an angle:
1. Select an image of patient.
2. Click the Angle icon on the tool box.
3. Move the mouse pointer to the center of angle, and click the left-button of the mouse.
4. Click the left-button of the mouse after selecting 2 different point in the image
5. The value of the angle is presented in the image automatically.
You can draw one angle only at a time. If you wish to draw another
angle, you must click the icon again.
19
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.11
Ellipse
This function is used to draw an ellipse (including circle) over an image to indicate a region of
interest.
To draw an ellipse:
1. Select an image of patient.
2. Click the Ellipse icon on the tool box.
3. Move the mouse pointer to the main image window.
4. Click the left-button of the mouse at one of the apexes of the rectangle circumscribe
to an ellipse you want to draw. And drag the mouse in the image.
If you move the mouse pointer on the curve of an ellipse, click select button and the
mouse pointer takes the shape of 4-arrows. In this time, dragging the ellipse, you can
move the ellipse to other positions.
20
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.12
Arrow
This function is used to draw an arrow over an image to indicate a region of interest.
To draw an arrow:
1. Select an image of patient.
2. Click the Arrow icon on the tool box.
3. Move a mouse pointer to the main image window.
4. Locate the
21
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.13
Polygon
This function is used to draw a polygon over an image to indicate a region of interest.
To draw a polygon:
1. Select an image of patient.
2. Click the Polygon icon on the tool box.
3. Move the mouse pointer to the main image window.
4. Locate the mouse pointer on the image which is a start point and click left-button of
mouse.
5.
22
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.14
Text
This function is used to insert the text on an image. By using this function with line, angle and
elliptical function, you can save investigation results to database and notify it to others.
To insert a text :
1. Select an image of a patient.
2. Click the Text icon on the tool box.
3. Drag the mouse over a rectangle area where you want to insert a text.
4. Type a text in the rectangle. To end typing, Press Enter key or click the left-button of the mouse
outer region of the rectangle. Then the background changes from white color to transparent.
If you move the mouse pointer on the text area, click select button and the mouse pointer
takes the shape of 4-arrows. In this time, dragging the text, you can move the text to another
position.
If you want to modify the text, please double click the text.
You can insert one Text only at a time. If you wish to insert more Text,
you must click the icon again.
23
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.15
Distance
This function is used to draw a line connects between two points over an image and measure
the distance. When the drawing is completed, the distance of the line is computed and
presented automatically.
To draw a line:
1. Select an image of a patient.
2. Click the Distance icon on the tool box.
3. Move the mouse pointer to the main image window.
4. Press the left-button of the mouse at one point and drag to the other point you want to
draw a line between them.
24
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.16
Calibration
This function is used to draw a line connects between two points over an image and convert
unit of measured distance from pixel to mm. When the drawing is completed, the window for
calibration of unit is presented automatically.
To calibration of unit,
1. Select an image of a patient.
2. Click the Calibration icon on the tool box.
6. Move the mouse pointer to the main image window.
7. Press the left-button of the mouse at one point and drag to the other point you want to
draw a line between them.
1. Input mm and click OK on the window for calibration of unit.
2. The value of length will be presented by mm from next time automatically.
25
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.17
Fit
This function is used to fit an image to the window size. The original image size is fitted to the
window size.
To fit an image to the window size:
1. Select an image of a patient.
2. Click the Fit icon on the tool box.
3.18
Invert
26
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.19
CW (Clockwise)
3.20
CCW (Counterclockwise)
27
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.21
Horizontal
This function is used to convert an image to the horizontal mirror image. (top and bottom are reversed).
To use the Horizontal Mirror:
1. Select an image of a patient.
2. Click the Horizontal Mirror icon in the tool box and the image is flipped horizontally.
To convert several images at once, hold on pressing [Ctrl] key while you are doing the 1~2 steps.
If graphic elements are shown in the image (text, lines, angles, etc.) they are also flipped
and retain their position with respect to the image.
3.22
Vertical
This function is used to convert an image to the vertical mirror image. (left and right are reversed).
To use the Vertical Mirror
1. Select the image of a patient.
2. Click the Vertical Mirror icon in the tool box and the image is flipped vertically.
If graphic elements are shown in the image (text, lines, angles, etc.) they are also flipped
and retain their position with respect to the image.
28
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.23
L/R
This function is used to indicate Left, Right on left side of an image to the vertical mirror image.
To indicate Left, Right,
1. Select the image of a patient.
2. Click the L/R icon on the tool box.
3.24
Reset
29
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.25
Palette
This function is used to change color of line and text for Distance, Ellipse, Text, Angle, Arrow
and Pencil and set Pencil thickness, Text Size for writing test and Text size for indicating
information.
To use Palette
1.
2.
3.
30
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.26
Filter
This function is used to filtrate the image with basic filter function..
To use Filter function,
1.
2.
3.
31
Zenis Software_Ver2.50
Digital X-ray Total Solution
<Average Filter>
<Sharpen Filter>
<Emboss>
<Medium Filter>
32
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.27
Play
2.
3.
33
Zenis Software_Ver2.50
Digital X-ray Total Solution
No.
Frame/sec
1
2
3
4
5
30
15
7.5
3.75
1
Max. recording
time
17
35
71
142
534
4. Check With sound if you want to record sound with micro phone which is installed in PC.
5.
6.
7.
8.
When max. recording time is exceeded, take frames from the first.
9.
34
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.27.3 PLAY
1.
2.
3.
35
Zenis Software_Ver2.50
Digital X-ray Total Solution
3.28
Window Level
(Non icon image)
This function is used to adjust the window level(brightness and contrast) of an image.
The current window level values are shown in the bottom left-hand corner of the image. The
adjusting method is same with default function. But you can use right-button dragging.
To adjust the window level of an image:
1. Select an image of a patient.
2. Click the right-button of mouse on the image.
3. Mouse pointer takes the shape of a shining sun and half dark-bright circle.
4. Click and drag within the image. The image values are altered simultaneously.
Brightness +
Contrast -
Contrast +
Brightness -
36
Zenis Software_Ver2.50
Digital X-ray Total Solution
IV. Exposure
The Exposure mode is consisted of 8 menus. This mode is used to take an X-ray image of a
patient.
4.1
Registration
37
Zenis Software_Ver2.50
Digital X-ray Total Solution
4.1.2 Worklist
Worklist shows the list of reserved patients from the worklist server.
38
Zenis Software_Ver2.50
Digital X-ray Total Solution
4.2
4.3
DICOM Server
39
Zenis Software_Ver2.50
Digital X-ray Total Solution
You can select whether to transfer the all images or the selected images.
- Cancel: Abort the transformation
- OK: Proceed the transformation
4.3.2 Configure Storage Server and Worklist Server
1. Click the Configure button and the following dialog box will pop up.
2. Input the information of item and click the OK button.
You cant apply the configuration while the DICOM transformation is running.
40
Zenis Software_Ver2.50
Digital X-ray Total Solution
4.4
2.
3.
41
Zenis Software_Ver2.50
Digital X-ray Total Solution
42
Zenis Software_Ver2.50
Digital X-ray Total Solution
4.7
Close Patient
The Close Patient menu is used to close all the information and images of a selected patient
4.8
Shutdown
43
Zenis Software_Ver2.50
Digital X-ray Total Solution
V. Archive
The Archive mode is consisted of 8 menus. This mode is used to search and delete
information of all the enrolled patients and etc..
5.1
Search
This menu is used to search the information of all the enrolled patients.
To search the information of patient:
1. Click the Search menu.
2. Then the below dialog box will appear.
3. Search Range: You can select any condition in the dialog box as following:
<Research Result>
44
Zenis Software_Ver2.50
Digital X-ray Total Solution
5.2
Open Patient
The Open Patient menu is used to open the data of selected patient.
To open the data of a patient:
1. Select a patient in the list.
2. Click the Open Patient menu, the Archive mode changes to the Viewer mode
automatically.
3. The Archive mode changes to the Viewer mode automatically.
5.3
Delete Patient
The Delete Patient menu is used to delete all the data of a selected patient.
To delete the data of a patient:
1. Select a patient in the list.
2. Click the Delete Patient menu and the data of the patient is deleted from the local
database.
45
Zenis Software_Ver2.50
Digital X-ray Total Solution
5.4
DICOM Server
This is all the same with the DICOM Server in the Exposure mode.
See 4.3 DICOM Server.
5.5
Modify Information
This is all the same with the Modify Information in the Exposure mode.
See 4.5 Modify Information.
5.6
Convert / Export
The Convert / Export Images is used to save the image with information of patient or only
Image of patient at users local HDD.
Function of this menu is as below.
5.6.1 File Type: You can select an image format in BMP, JPEG , TIF, PNG and GIF.
5.6.2 Destination Directory : You can restore the images in the arbitrary directory in the local
HDD.
46
Zenis Software_Ver2.50
Digital X-ray Total Solution
5.6.3 Selection Option : You can select whether to convert / export all images or only selected
images of a patient.
5.6.4 Patient Information File : You can select whether to convert/export images with
Information file of patient or only images of a patient.
5.6.5 Burned Information on image : Yon can select whether to save images with annotation or
only images of a patient to external memory.
47
Zenis Software_Ver2.50
Digital X-ray Total Solution
5.7
Insert image
5.8
Import patients
48
Zenis Software_Ver2.50
Digital X-ray Total Solution
5.9
Shutdown
This is all the same with the Shutdown in the Exposure mode.
See 4.8 Shutdown.
VI. Viewer
In the Viewer mode, you can apply various image processes to a correction needed image and
investigate the image in detail with various tools.
6.1
DICOM Server
This is all the same with the DICOM Server in the Exposure mode.
See 4.3 DICOM Server.
6.2
This is all the same with the Print in the Exposure mode.
See 4.4 Print.
6.3
Modify Information
This is all the same with the Modify Information in the Exposure mode.
See 4.5 Modify Information.
6.4
Convert/Export
This is all the same with the Convert/Export in the Archive mode.
See 5.6 Convert/Export
49
Zenis Software_Ver2.50
Digital X-ray Total Solution
6.5
Delete Image
This is all the same with the Delete Image in the Exposure mode.
See 4.6 Delete Image.
6.6
Close Patient
This is all the same with the Delete Patient in the Exposure mode.
See 4.7 Delete Patient.
6.7
Shutdown
This is all the same with the Shutdown in the Exposure mode.
See 4.8 Shutdown .
50
Zenis Software_Ver2.50
Digital X-ray Total Solution
VII. Appendix A
<Keyboard Shortcut>
Zenis Software has a lot of shortcut keys as below.
If you use shortcut keys, you can use the software more conveniently.
F1 - 1x1 Layout
F2 - 2x2 Layout
F3 Zoom
F4 Fit Window
F5 LIH (Last Image Holder)
F6 Exposure Mode
F7 Archive Mode
F8 Viewer Mode
51