Escolar Documentos
Profissional Documentos
Cultura Documentos
2.
3.
4.
5.
6. Which from the curves presented in the below plot DOES NOT EXPRESS a
materials granularity:
a. c1
b. c2
c. c3
d. c4
7.
c1
c2
c3
c4
0,2
16
31
a.
b.
c.
d.
b.
c.
d.
d.
C4AF
25. The admixtures which by mixing with the water presents their own hardening
capacity are:
a. cimentoid
b. hydraulic
c. unhydraulic
d. inert
26. Concretes bliding is determined by:
a. The waters evaporation pressure
b. The exces of the mixing water
c. The reduced fine aggregate contain
d. The solid components incapacity to water absorption
27. The concretes with light weight aggregates are:
a. Macroporous concretes
b. celular concretes
c. compact light weight concretes
d. semiheavy weight concretes
28. The shock strength is expressed in:
a.
N/mm2
b.
Kg/m3
c.
N.m
d.
%
29. The corrosion strength of aluminatic cements stone is given by:
a. Great aluminates contain
b. The leak of free Ca(OH)2 liber, in hydrated cement
c. Low silicates contain
d. The aluminatic cements stone compactness
30. The woods carver is a:
a. Brut product
b. semibrut product
c. finished product
d. semifinished product
31. Rocile au structur stratificat dac: The rocks have a layered texture if:
a. The component minerals have granulated shape and the rock present anisotropy
b. The component minerals have isometric shape and the rock present isotropy
c.
d.
The component minerals (the same in the whole mass) are disposed in layers and
the rock presents the cleavage phenomenon
Different component minerals are disposed in layers
32. Indicele de plasticitate al unei argile se apreciaz prin intermediul: The plasticity
index of a clay is appreciated through:
a. The humidity
b. The drying shrinkage
c. The burning shrinkage
d. The consistency
33. The clay is:
a. An aerian binder
b. A clinquerisated hydraulic binder
c. A unclinquerisated hydraulic binder
d. mixed
34.The unclinquerised silicatic binders are forming at a temperature of:
a. 12000C
b. 13000C
c. 14500C
d. 15600C
35. Cimentul aluminos se comport bine la temperaturi: The aluminatic binder has a
good behaviour at a temperature of:
a. >300C
b. >400C
c. <400C
d. <300C
36. Permeabilitatea pietrei de ciment n raport cu a betonului este: The cement stones
permeability in front with concete is:
a. Greater
b. Equal
c. Lower
d. Depends on concretes type
37. The matrix aggregate adhesion is influenced by the aggregates mineralogical
nature:
a. unconditioned, yes
b. unconditioned, no
c. yes, by using an imposed cement type
d. no, by using an imposed aggregate type
38. Temperaturile pozitive mari pentru betonul n curs de ntrire sunt: The great
positive temperatures for the hardening concrete are:
a. Not influencing the forming of the concretes structure
b. Favourable
c. Favourable, if an enough sufficient humidity is maintained until maturity
d. Unfavourable
39. Plcile OSB sunt plci din : The OSB panels are:
a. Wood oriented fibres
b. Wood unoriented fibres
c. Wood oriented chips
d. Wood unoriented chips
40. Din punct de vedere al aspectului suprafeei la agregate, influen favorabil
maxim asupra caracteristicilor betonului au suprafeele: From surfaces aspect
of the aggregates point on view, the maxim favourable influence on concretes
characteristics is given by the:
a. smooth slashing
b. smooth glossy
c. glossy
d. rugouse
41. The contacted chemical elements, in different temperature and pressure
conditions are giving complex chemical combinations, suh as:
a. Ores
b. Minerals
c. Rocks
d. Magma
42. Pentru obinerea produselor ceramice brute colorate se folosesc argile: to obtain
the coloured brute ceramics are used:
a. Fusible clays
b. Vitrifiable clays
c. Week refractory clays
d. Refractory clays
43. Lianii care se ntresc doar n mediu uscat i dup ntrire nu rezist la aciunea
apei sunt liani: The binders which are hardening in dry environment and after
hardening does not resist to waters action are:
a. Hydrophobic binders
b. Hydraulic binders
c. Aerien binders
d. Mixed binders
44. The plaster is obtained by row materials burning at a temperature of:
a.
b.
c.
d.
150-2000C
9060C
12000C
14500C
b.
c.
d.
1.
Brute products
Semifinite products
Semibrute products
Mircea Rujanu
2.
1
Mircea Rujanu
3.
1
Rujanu, M.
4.
2
5.
6.
7.
Rujanu, M.
Livia Ingrid Diaconu
Livia Ingrid Diaconu
Livia Ingrid Diaconu
Bibliografie
MATERIALE DE CONSTRUCII. Caracteristici tehnice generale, obinerea,
ISBN 978-973-579-213-8, Editura SPIRU HARET
ncercarea i utilizarea materialelor, 512pag.
Editura TERRA NOSTRA, Iasi 2010
MATERIALE DE CONSTRUCTII ANALIZE I NCERCRI, 249 pg.
ISBN 978-973-1888-21-7
MATERIALE DE CONSTRUCII, Aplicaii ale teoriei materialelor la liani i
produse cu liani, lemn, mase plastice, la materiale de protecie i finisaj, 227 EdituraSPIRU HARET, ISBN 978-973-8432-64-2
pag.
TEORIA MATERIALELOR DE CONSTRUCII I UNELE DIN APLICAIILE EI,
EdituraSPIRU HARET, ISBN 978-973-8432-64-2
180 pag.
Note de curs (format electronic)
Chimie,
www.comunitate.materiale.constructii.ro
Note de curs (format electronic)
Materiale de constructii I
www.comunitate.materiale.constructii.ro
Note de curs (format electronic)
Materiale de constructii II
www.comunitate.materiale.constructii.ro
Not: ntrebarile notate n rou, reprezint ponderea de 20% ntrebri ce nu se dau pe site-ul facultii.
2011
2010
2008
2007