Escolar Documentos
Profissional Documentos
Cultura Documentos
First dive
Using the PADI Recreational Dive Planner tables shown above, (click to see
larger versions), let's say you plan on visiting a reef that's 60 feet down. PADI
Table 1, the No Decompression Limits and Group Designation Table, shows that
the absolute maximum time you can stay at that depth without having to make a
decompression stop is 55 minutes (if you have enough air, that is).
It's never a good idea to dive to the limits, so you decide to stay down 35
minutes (which places you in Pressure Group N; more on that later).
You do that dive and come back up. Can you now just use that same table, get
a fresh tank of air, and go right back down for a second look? No way.
certain Pressure Group, as shown in Table 1. That 35 minute dive to 60 feet put
you in Pressure Group N. Table 2 shows what Pressure Group you will be in
after a certain "surface interval," i.e. the time between the end of your first dive
and the start of your second dive. Obviously, the longer you wait, the more of
the extra nitrogen your body absorbed during the first dive gets released.
So what the Dive Planner does is determine how much extra nitrogen is still in
your body after a dive, and then convert that into "Residual Nitrogen Time," or
"RNT." That sounds intimidating, and they really should come up with a simpler
term and explanation. As is, "Residual Nitrogen Time" tells you how much time
at a certain depth it would take to absorb the amount of nitrogen you already
have in your body from the previous dive, and you can find that in Table 3, the
Repetitive Dive Timetable. What does that mean? Well, if the table says your
residual nitrogen time is 20 minutes for a given depth, then you can stay at that
depth 20 minutes less than on your first dive because, after all, you already
absorbed that much nitrogen and it still is in your system.
How to plan for the second dive
So let's see how we use the tables to plan the second dive after our 35 minute
stay at 60 feet. We plan on a surface interval of half an hour, and then go see
another reef that's 50 feet down.
Using the PADI table, we find that the first dive put us into pressure group N.
We follow "N" into table 2 and then find the column for a 30 minute surface
interval. That would be column I.
So now we flip the table (told you it was a bit cumbersome) and look at column
I. Then we look at the cell where column I intersects with the 50 feet row. There
will be two numbers: 31 on top (white background) and 49 on the bottom (blue
background). The top number is your residual nitrogen time. So on your second
dive to 50 feet, you still have as much nitrogen in your system as you'd absorb
in 31 minutes down there. The second number, 49, is your adjusted nodecompression limit, the time you cannot exceed on your next dive. In other
words, your actual bottom time can be no more than that. Let's say you decide
to stay down for only 30 minutes.
So where do you stand after your second dive? Well, You still had enough
residual nitrogen in your system as you'd get from a 31 minute dive, and you
now added another 30 minutes of actual bottom time on your second dive. So
your total bottom time is now 61 minutes. Flip the chart around and look at
Table 1. Yikes. At the end of your second dive to 50 feet, you're now in pressure
group T.
And a third
But let's say you're still not done after your second dive and you plan a third,
again to 50 feet. As stated above, although you only stayed for 30 minutes at 50
feet on the second dive, you need to add the 31 minutes of residual nitrogen
you still had in your system, i.e. 31 minutes. So the total nitrogen is as if you'd
stayed down there for 61 minutes, making 61 minutes your total bottom time
and you are in Group T.
If you now plan on waiting an hour and 15 minutes, and then go see that reef at
50 feet again, you find yourself in Pressure Group E. Flip the chart once again
so you can see Table 3. Find where column E intersects with the 50 foot depth
row and you find that your residual nitrogen time is now 21 minutes and your
new adjusted no-decompression limit is now 59 minutes. And so on.
How to back into surface interval time using the dive tables
In real life, reality often interferes with the best laid plans and time is an issue.
Let's say you do that first 35 minute 60 foot dive, ending up in Pressure Group
N, and then want to see another dive site that's 50 feet down and you'd like to
explore for 40 minutes. How long would you have to wait on the surface? Well,
start with Table 3, find where the 50 foot row intersects with an adjusted nodecompression time of 40 minutes, and you find it's column L. Flip the card and
see where your current Pressure Group, row N,intersects with the Pressure
Group you'll be in after that second dive, L.
You find that your surface interval needs to be just 9-13 minutes. Just to
practice a bit more, assume the second dive goes down to 50 feet again but
you'd like to stay for an hour. Now Table 3 shows you're in Pressure Group D.
Flip the chart and intersect column D with row N. Oops. Now you have to wait
1:00 to 1:08 hours between dives. See what a big impact the extra botto PADI
Dive Table "Fine Print" The PADI recreational dive planner tables have some
"fine print" (literally) on the backside. That's important stuff and not to be
ignored, ever.
Safety stops -- the optional 3-minute safety stop at 15 feet becomes mandatory
if you get within three pressure groups of a no-decompression limit, or for any
dive deeper than a hundred feet.
Emergency Decompression -- If for some reason you exceed a no
decompression limit by up to five minutes, you must make an 8-minute
decompression stop at 15 feet, and then not dive for six hours. If the no
decompression limit is exceeded by more than five minutes, you must make a
15-minute stop at 15 feet and then not dive for at least 24 hours.
Air travel after dives -- After a single dive, wait 12 hours. After multiple dives,
or several days of diving, wait 18 hours. If decompression stops were