Escolar Documentos
Profissional Documentos
Cultura Documentos
MALAGA
INSTRUCTOR
REFERENCE
BOOK
Francis
May 1998
2. A low pilot system pressure or a worn pilot pump will show up as:
a) Excessive engine lugging
b) Excessive engine smoke
c) Brakes not releasing
d) Slow implements
3. The purpose of the underspeed control is to:
a)
b)
c)
d)
4. The purpose of the track brake valves on the track motors are to prevent
motors from freewheeling on a downhill situation by:
a)
b)
c)
d)
6. The valve that provides signal pressure to destroke the main pumps is called:
a)
b)
c)
d)
Page:
7. The hydraulic lock lever prevents implement movement in the safe position by:
a)
b)
c)
d)
Page:
12. Protection for the boom structure due to some downward external force
is provided by the:
a) Line relief valve on the boom spool housing
b) Boom anti-drift check valve
c) Main system relief valve
d) Line relief valve in the boom drift reduction valve housing
13. The NFC screw when adjusted counterclockwise too far can cause pumps to go
toward:
a) Minimum angle and increase engine speed by more than 10 rpm
b) Maximum angle and decrease engine speed by more than 10 rpm
c) NFC screw will never need to be adjusted
d) Causing engine to go into lug
14. On 300B serie, when adjusting the implement pump destroking pressure :
a) Adjust the power screw in to raise the PS pressure and low the destroking pressure
b) Adjust the power screw out to raise the implement pump destroking pressure
c) Adjust the NFC screw in to raise the implement pump destroking pressure
d) None of the above
15 . When PS pressure to the implement pump regulator increases:
a) The pump upstroke and engine rpm decreases
b) The pump upstroke and the engine rpm increases
c) The pump destroke and the engine rpm decreases
d) The pump destroke and the engine rpm increses
Page:
LAB EXERCISES
Page:
LAB EXERCISES
Date__________________________________
Serial Number_____________________________
PUMP POSITION
UPPER PUMP
LOWER PUMP
Page:
SPECIFICATION
ACTUAL
PS PRESSURE
LAB EXERCISES
Date__________________________________
Serial Number_____________________________
LOWER PUMP
Page:
SPECIFICATION
ACTUAL
PS PRESSURE
LAB EXERCISES
Date__________________________________
Serial Number_____________________________
PRESSURE TESTS
TESTS
Pilot system pressure
(w/engine at high idle)
Page:
SPECIFICATIONS
ACTUAL
LAB EXERCISES
Date__________________________________
Serial Number_____________________________
PRESSURE TESTS
TESTS
Implement system pressure
(w/engine at high idle)
Page:
SPECIFICATIONS
ACTUAL
LAB EXERCISES
Date__________________________________
Serial Number_____________________________
PRESSURE TESTS
TESTS
Travel system pressure
(w/engine at high idle)
Page:
10
SPECIFICATIONS
ACTUAL
LAB EXERCISES
Page:
11
CASE STUDY
You may use the appropriate service literature and class notes to
complete the case study.
SITUATION
QUESTIONS
DIAGNOSTIC CHECKS
Page:
12
ANSWER SHEET
Page:
13
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.