Escolar Documentos
Profissional Documentos
Cultura Documentos
CE
SFTY100/B4
II
In order to assure the safety of all employees, the following clearance and switching
procedures are established and shall apply to all departments at Southern Colorado
Power. Strict adherence to these procedures is mandatory.
b. Operating Procedure No.1: #1b. page LIII
The purpose of these rules is to provide a standardized procedure which is safe, practical,
and easily understood for use in granting and returning clearances and performing
switching on electrical circuits of devices for all personnel involved.
6. Changes must be analyzed for system and parts risks.
a. Rule Changes, page VI
Suggestions for additions or revisions to these rules shall be submitted, in writing, to the
Safety Department.
b. Section 1600: #1b, page 73
Each crew member is responsible for carrying on his part of the work safely and for
warning other members of the crew of any changed conditions or hazards which they
may not have noticed.
7. Residual hazards must be monitored and controlled.
a. Section 100: #35a, page 11
Danger signs must be displayed and/or barricades used where work is being carried on
where the public or traffic may be endangered by passing through the danger zone.
b. Section 100: #16a, page 4
Flammable liquids or toxic chemical must not be disposed of by pouring them into sewer
or other drains.
8. Management shall control systems safety programs.
a. Occupational Safety and Health Hazards, page VI
The company is responsible for employee compliance with all aspects of Occupational
Safety and Health Rules is subject to serve penalties for violation of these rules by any
employee.
b. Section 100: #2b, page 1
Existing governmental codes, statues, rules and orders shall be considered a part of this
Manual and where any conflict exists between the two, those of governmental status shall
prevail.