Escolar Documentos
Profissional Documentos
Cultura Documentos
Applications
Description
The Evolution Model SLRN Lock Mandrel is built for use with SLRN
Nipples
Heavy weight tubing
applications
Plugging under pressure
The lock mandrel has two locking keys, or dogs, to prevent both upward
and downward movement once the device is engaged in the nipple. It
has no No-Go intrinsic to the lock mandrel itself.
pressure/temperature
measurements
Positive locator for straddle
Operation
systems
Nearly unlimited locations for
setting and locking subsurface
flow controls
Attach the SLRN Lock Mandrel, and the accompanying Flow Control
devices to an SLR Running Tool. Lower the tools into the tubing, to the
required depth.
The running tool will hold the locking keys of the SLRN Lock Mandrel in
the retracted position until the desired landing nipple is reached.
As the packing section of the Flow Control device passes through the
seal bores section of the landing nipples, the resulting loss of weight will
show on the weight indicator.
To set into an SLRN Bottom No-Go Landing Nipple, and if there is no
landing nipple between the surface and the target nipple the running
tool must be put into the control position by hand at surface.
The Lock Mandrel can also be tripped downhole on a SLR Nipple
immediately above the target SLRN. Passing through the nipple above
the target sets the dogs and keys on the Lock Mandrel in the expanded
position, ready to be set as the tools enter the target nipple.
Setting down on the running tool will set the Lock Mandrel. Jar down to
firmly set the tool, and then jar up to shear the lower pin.
Flow Control
CANADA
Main: 403-243-1442
Main: 361-575-7900
Fax: 403-258-2614
Fax: 361-575-8081
Tel: 780-522-8294
Cell: 432-638-7902
Fax: 780-875-6337
4512 81 Ave
Edmonton, Alberta
Tel: 587-758-9091
Cell: 780-919-1722
Cell: 780-893-1019
www.eotools.com
www.eotools.com