Escolar Documentos
Profissional Documentos
Cultura Documentos
Specifications
Combination Drench Shower and Eyewash Unit saves space and fits easily into any work
environment. Shower valve operates quickly by a pull rod with a triangular handle. Shower
provides a superior washdown with a more even spray pattern. Eyewash operated by a large,
highly visible push handle. Safe, steady water flow under varying water supply conditions
from 3090 PSI is assured by integral flow control in the sprayhead assembly. NOTE: The
ANSI Z358.1 standard requires an uninterruptible supply of flushing fluid at a minimum 30
PSI flowing pressure.
This plumbing fixture is not intended to dispense water for human
Model Description
S19-310
S19-2100
Recommended Option:
Navigator S19-2100 EFX25
Emergency Thermostatic Mixing Valve
Emergency Fixtures
Document No. 4565
Page 1 of 3
This information is subject to change without notice.
2/10/2012
2012 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817
bradleycorp.com
S19-310SS16
Combination Drench Shower/Eyewash Unit
Standard Equipment
SpinTec Showerhead
High performance type 316 corrosion-resistant stainless steel showerhead
measures 2" (51mm) in diameter. SpinTec drench showerhead features integral
26 GPM flow control, conserving water and helping to accurately size your tepid
water system.
30
Eyewash Bowl
10" (273mm) diameter type 316 corrosion-resistant stainless steel.
25
20
15
10
Water Supply
1" NPT.
5
0
0
10
20
30
40
50
60
70
80
90
Local codes may require the installation of a backflow
Emergency Fixtures
Document No. 4565
Page 2 of 3
This information is subject to change without notice.
2/10/2012
2012 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817
bradleycorp.com
S19-310SS16
Combination Drench Shower/Eyewash Unit
2658"
(676mm)
3" (95mm)
2"
(51mm)
94"
(2388mm)
to Bottom
of Base
86"
(2203mm)
to Bottom
of Base
9"
(229mm)
65"
(1664mm)
to Bottom
of Base
6838"
(1737mm)
to Bottom
of Base
10"
(273mm)
10"
(260mm)
9" (229mm)
Flange with (3)
3
8" (10mm) Holes
on 8" (203mm)
Bolt Circle
36"
(933mm)
to Bottom
of Base
6"
(152mm)
All dimensions assume standard thread engagement. Variations in manufacturing allow for +/- 18" (3mm) per threaded joint. To
find the tolerance of a dimension, add the number of thread joints in between a dimension and multiply it by 18" (3mm).
Emergency Fixtures
Document No. 4565
Page 3 of 3
This information is subject to change without notice.
2/10/2012
2012 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817
bradleycorp.com