Escolar Documentos
Profissional Documentos
Cultura Documentos
Range of application
Nowadays test pieces from steel sheet and metal foils
are economically and accurately produced using speci
men blanking machines. The standards, e.g.
ISO 6892, ASTM A 370, ... stipulate that the test results
must not be influenced by any material change caused
by strainhardening at the test piece edge zone.
PI 262 2.0812
Blanking tools
Blanking tools can be produced exactly to customers
requirements, an example being tools made from a spe
cial steel which were produced with additional guides
to enable dumbbell specimens to be punched from foils
with a thickness of 0.04 mm and a tensile strength of
2,150 MPa. Depending on the strength of the material,
between 20,000 and 150,000 specimens can be pro
duced with the tools, which can then be resharpened.
Advantages/features
Fast, costefficient production of tensile specimens
No specialists required anyone can operate the
machine after a brief training period
Manufacture of very highquality specimens by
finishing with a specimen grinding machine
Robust, easily maintained machines
Long edge life of the blanking tools and possibility of
repeated resharpening
Product Information
Specimen blanking machines for specimen preparation of metals
Type
M-Cut 65
Item number
048979
Max. compressive force
650 kN
Design Cshape
Piston stroke
20 mm
Strokes per minute
5
Max. specimen length
300 mm
Dimensions
width
760 mm
depth
760 mm
height
1615 mm
Weight approx.
1500 kg
Connection
4 kVA
Hydraulic power pack (inclusive)
Working pressure -
Flow capacity
-
Dimensions
width -
depth -
height -
Weight approx. -
Power supply
-
Noise emission -
RZ 100
890735
1000 kN
Oshape
40 mm
6
275 mm
1500 mm
960 mm
1620 mm
1800 kg
8 kVA
RZ 150
890710
1500 kN
Oshape
40 mm
6
275 mm
1500 mm
960 mm
1620 mm
1800 kg
8 kVA
210 bar
7.4 I/min
900 mm
620 mm
1010 mm
200 kg
400 V, 50 Hz, 3 PH/PE
< 70 db
300 bar
7.4 I/min
900 mm
620 mm
1010 mm
200 kg
400 V, 50 Hz, 3 PH/PE
< 70 db
Item number
048982
048985
For all specimen blanking machines we offer you blanking tools exactly according to your specifications.
Specimen dimensions:
Total length
Gage length
Specimen width
Parallel specimen
length
Radius
Shoulder width
Product Information
Specimen blanking machines for specimen preparation of metals
Blanking tools to M-Cut 65
Description
Blanking tool for EN 10002/ISO 6892 specimen type 2, sheet thickness 0.21.2 mm,
stamping allowance each side 0.2 mm, sength 250 mm, width 30 mm, radius 20 mm
Blanking tool for EN 10002/ISO 6892 specimen type 2, sheet thickness 1.23 mm,
stamping allowance each side 0.2 mm, length 250 mm, width 30 mm, radius 20 mm
Item number
048986
048994
Stamping allowance
(each side)
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
2 mm
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
2 mm
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
2 mm
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
2 mm
Item number
Stamping allowance
(each side)
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
0.2 mm
2 mm
0.3 mm
2 mm
0.6 mm
2 mm
Item number
017388
017390
017391
017392
017393
017394
017395
017396
017398
017399
017400
017401
017478
017480
017481
017484
017486
017491
017505
017506
017507
017508
017509
017511
017515
017516
017517
017518
017520
017521
017522
017524
017525
017528
017531