Escolar Documentos
Profissional Documentos
Cultura Documentos
21A-B
M/FM/SSB RADIO
TRANSMITTER
RECEIVER
SYSTEM
mod. M245/EV
TRANSMISOR Y
RECEPTOR DE
RADIO AM/FM/SSB
mod. M245/EV
INTRODUCTION
INTRODUCCION
Localizacin de averas
TRAINING PROGRAM
Low frequency processor (low pass filter, level matcher,
tone generator for testing)
Modulation
and
Demodulation
techniques
for
transmissions:
- AM
- DSB (Double Side Band, with use of the balanced
modulator)
- SSB (LSB and USB, with use of the quartz filter)
- FM (VCO with use of the varicap diode)
- Of logical states (coder for 4-channel radiocontrol)
Local oscillator
IF and RF Conversion mixer
RF amplifier
IF Filter and Amplifier
Transmission via radio (antenna)/cable
Indicator of the intensity of the received signal
Indicator of the code received by the radiocontrol
Suppressed carrier regenerator
Change of the tuning frequency
AGC (Automatic Gain Control)
AF output amplifier
Calibration and measurement of all stages and of the
whole module
Trouble-shooting
Testing and measurement of the complete system
Elettronica Veneta & IN.EL. S.p.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia,16 - Tel.+39 0422 7657 (r.a.) - Fax.+39 0422 860784
Export: Tel. +39 0422 765802- Fax +39 0422 861901-www.elettronicaveneta.com E-mail: export@elettronicaveneta.com
CAT N. 21A-B
TECHNICAL SPECIFICATION
AM/DSB channel in MW mean waves band
SSB channel in band 80 m SW (3-4 MHz)
FM channel in MW mean wave band
Channel for radiocontrol in MW average waves band
Generator of two tones: 1000 and 2000 Hz
Reg. input for external microphone and for BF signal
RF output power: 40mW, adjustable
RF output impedance: 50 Ohm
BNC IN/OUT connectors for external antenna or cable
AF output power amplifier 1W, with volume regulation
Included loudspeaker
20 insertable faults
Power supplies: 230/110 Vac - 50/60 Hz
CARACTERISTICAS TECNICAS
Canal AM/DSB en la banda media MW
Canal SSB en la banda de 80 m SW (3-4 MHz)
Canal FM en la banda media MW
Canal para el telemando en la banda media MW
Generador de dos tonos: 1000 y 2000 Hz
Entrada de regulacin para micrfono externo y para
seales de BF
Potencia de salida RF: 40mW, ajustable
Impedancia de salida RF: 50 Ohm
Conectores de ENTRADA/SALIDA BNC para antena
exterior o cable
Amplificador de potencia de salida AF de 1W, con
regulacin de volumen
Altavoz incluido en el equipo de serie
Posibilidad de introducir 20 averas
Tensiones de alimentacin: 230/110 Vca - 50/60 Hz
INCLUDED ACCESSORIES
Theoretical-experimental handbooks
Microphone
Cables as necessary
ACCESORIOS INCLUIDOS:
Manuales de teora y prcticas
Micrfono
Cables necesarios
Seales de
modulacin y
de AM
Elettronica Veneta & IN.EL. S.p.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia,16 - Tel.+39 0422 7657 (r.a.) - Fax.+39 0422 860784
Export: Tel. +39 0422 765802- Fax +39 0422 861901-www.elettronicaveneta.com E-mail: export@elettronicaveneta.com