Escolar Documentos
Profissional Documentos
Cultura Documentos
FLOOR COAT
CURING, SEALING,
HARDENING AND
DUSTPROOFING MEMBRANE
FLOOR COAT is a resin rubber copolymer curing
compound and sealer for concrete. It has been
modified with acrylates to make a harder film and
provide better gloss retention than most curing and
sealing compounds. FLOOR COAT can be applied to any concrete surface, old or new, interior
or exterior.*
* may affect appearance, see precautions/limitations.
PRIMARY APPLICATIONS
l Industrial floor slabs
l Interior concrete surfaces
l Walls and columns
l Concrete toppings
l Warehouses
l Dry shake hardened floors
l Passenger and freight terminals.
FEATURES
l Provides a transparent curing film for new
concrete.
l Seals all concrete surfaces - old or new providing glossy appearance and easier
cleaning.
l Hardens new concrete by promoting a
proper cure for improved abrasion resistance.
l Dustproofs concrete by impregnating surface pores with tough durable film.
l Compatible with many paints, adhesives
and resilient floor coverings.
l After FLOOR COAT has dried and hardened, the product will assist in protecting
fresh concrete from rain damage.
SPECIFICATIONS AND COMPLIANCES
l ASTM C 309, type 1 & 1D, Class B
l Resilient tile Institute Specifications
l AASHTO Specification M-148, Type 1 & 1D
l U.S.D.A. approved for use in facilities where
this sealer may come into incidental contact with food product.
l Federal Specification TTC - 800 A
l Approved by Ohio EPA for contract with
public drinking water supplies.
TECHNICAL INFORMATION
Typical Engineering Data
The following results were developed under laboratory conditions.
l Drying time - Less than one hour
l
l
l
l
m2/Liter
First coat
:
6.1 - 8.6
:
:
9.8 - 12.3
7.4
Purpose of
Optional
Application
Second coat
Curing and sealing
New concrete
: 8.6 - 11.0
Sealing and Dustproofing
Old concrete
: 12.3 - 14.7
Anti-spalling Protection (2 coats) 7.4
* Coverage rates assume hard trowelled floors
except for Anti-Spalling category which assumes
broomed or floated surfaces. Coverage will vary
from the above rates depending on surface texture. THICKER APPLICATION MAY LEAD TO
DISCOLORATION AND IMPROPER SEALER
PERFORMANCE.
Appearance - FLOOR COAT is a clear liquid solvent based liquid with a slight amber color. After
application and drying, this product gives a clear,
glossy appearance to the concrete surface.
FLOOR COAT will turn a deep amber color upon
exposure to sunlight. This appearance may not
be satisfactory for exterior concrete.
PACKAGING
FLOOR COAT is packaged in 210 ltr drums and
20 ltr pails.
DIRECTIONS FOR USE
Surface Preparation - The concrete surface must
be clean and free of standing water. Remove any
sealer or other material that may prevent absorp-
l
l
l
CLEAN-UP
Tools and equipment may be cleaned with Euco
Solvent, xylene, xylol or toluene. Run cleaning
solvent through sprayer equipment to remove
material and prevent clogging of nozzle in future
use.
SEALER REMOVAL
Dried, cured sealer may be removed with strong
solvent such as xylene, MEK or toluene. Commercial paint strippers are also acceptable. (Always read direction and warning labels.)
Alternatively, the sealer can be removed by sandblasting or by other similar mechanical means.
PRECAUTIONS AND LIMITATIONS
l FLOOR COAT may darken, yellow or
slightly change the appearance of exterior
concrete surface.
l Heavy build-up will increase the potential
for yellowing.
l Do not apply over bleed water or free standing water.
l Use with adequate ventilation and keep away
from open flame If solvent odor is objectionable use of a water based product such
as DIAMOND CLEAR VOX, may be preferred.
l Do not apply over concrete to receive con-
CMCI