Escolar Documentos
Profissional Documentos
Cultura Documentos
ABSTRACT
Service quality is a crucial factor affecting customer satisfaction and business
performance. The importance of service quality was recognized by Parasuraman et al.
(1985). Researchers have been deeply engaged in the studies of service quality gap.
Among them, Lin, et al. (2009) have developed the IPGA model by integrating the
strengths of the importance-performance analysis (IPA) and the gaps analysis. This
study intends to develop a three dimension service quality gap model by extending the
IPGA model through adding in the construct of management perceptions of consumer
expectations. Based on the model, the service quality gap will be identified and
problems causing the gap analyzed. This research empirically investigates the
feasibility of the model at four various restaurant outlets of a hotel in Taiwan using
DINESERV, a 29-item instrument developed in 1995 by Steven, hoping to provide a
guide to researchers and the service industry as well for their future study on service
quality management.
Keyword: Service Quality, Gap Analysis, Important-Performance Analysis, IPGA,
DINESERV
INTRODUCTION
Service quality is a crucial factor affecting customer satisfaction and enhancing
business performance. Many researchers argued that service quality does indeed
increase customer satisfaction and loyalty (Bruhn and Grund, 2000; Gronholdt et al.,
2000; Martensen et al., 2000; Cassel and Eklof, 2001). Hence, it has become a prime
concern for the management to identify critical service attributes so as to improve
service quality. The importance of service quality was also recognized by
Parasuraman, Zeithaml and Berry (1985), who developed the Gaps model that defines
service quality as the differences between customers expectations and perceptions.
Much effort has also been put into exploration of service quality gaps. (Tsai, et al.,
2007, Lee and Chen, 2009, and Lin, et al. 2009) A number of studies maintained that
the Gap Analysis and the Importance-Performance Analysis (IPA) are the main
analytical approaches helping professionals improve service quality (Parasuraman et
al., 1985; Marr & Jeffrey, 1986; Hammasi et al., 1994; Chu and Choi, 2000; Oneill
and Palmer, 2004; Chen and Chang, 2005; Breiter and Milman, 2006; Abalo et al.,
2007). IPA (Martilla and James, 1977) provides advantages for evaluating customer
acceptance of a marketing program and gives management insights into which aspect
of the marketing mix requiring more attention and identifies areas that may be
consuming too many resources. Although the Gaps Analysis and IPA are considered to
be effective managerial tools and are widely used by researchers in various areas,
each of them has its limitations that have entailed related studies on modified
conceptions (Slack, 1996; Skok et al., 2001; Soetanto et al., 2001; Aigbedo and
Parameswaran, 2004; Chen and Chang, 2005; Bei & Shang, 2006; Pakdil and Aydin,
2007; Abalo et al., 2007). Among them, Lin, et al. (2009), by integrating the strengths
of IPA and Gap Analysis, developed the IPGA model, which has not only provided a
solution to both the theoretical and practical weaknesses generated while applying
IPA and Gap Analysis, but also helped redefine the actual quality attributes needed to
be improved in a service system.
This study intends to extend the IPGA model by Lin, et al. (2009) through adding in
the construct of management perceptions on consumer expectations, in addition to the
construct of consumer expectations and perceptions, so as to develop a three
dimension service quality gaps model. With the model, service quality gaps can be
identified and problems causing the gaps can be further analyzed. An empirical
investigation into the feasibility of the model was conducted at four various restaurant
outlets of a hotel in Taiwan using DINESERV, hoping to provide a guide to
researchers and the service industry as well for their future study on service quality
management.
LITERATURE REVIEW
The Gaps model & DINESERV
Service quality is undeniably crucial in achieving customer satisfaction and business
performance. There have been ample studies attributed to enhancing the quality of
service. Researchers such as Bruhn and Grund argued that service quality helps boost
customer satisfaction and loyalty (Bruhn and Grund, 2000; Gronholdt et al., 2000;
Martensen et al., 2000; Cassel and Eklof, 2001). Parasuraman et al. (1985) proposed
the Gaps model that defines service quality as the differences between customer
expectations and perceptions. The five gaps are: Gap 1, the listening gap; Gap 2, the
service designs and standards gap; Gap 3, the service performance gap; Gap 4, the
communication gap; and Gap 5, the customer gap. Using SERVQUAL as the basis,
Stevens et al. (1995) developed DINESERV to determine how customers view a
restaurants quality by refining LODGSERV (Knutson and Stevens,1990 ), which was
drafted by Knutson and Stevens for measuring service quality for lodging properties.
DINESERV has been regarded as a reliable, relatively simple tool to measure
restaurant service quality.
Importance-Performance Analysis
The Importance-Performance Analysis (IPA), proposed by Martilla and James (1977),
was originally applied to analyze the performance of the automobile industry. IPA
identifies the importance of the attributes associated with a service or product as well
as the degree of performance. The results are displayed on a two-dimensional grid.
The importance of the service attributes is plotted as the vertical axis while their
performance levels plotted as the horizontal axis. The means of performance and
importance divide the grid into four quadrants: Keep up the Good Work, Concentrate
Here, Low Priority, and Possible Overkill. The IPA, an effective technique for a
company to evaluate its competitive position in the market and to identify its
defective service qualities, has become a popular managerial tool and been widely
used by researchers in various areas, such as the travel and tourism industry (Zhang
and Chow, 2004; Deng, 2007), the traffic and transportation industry (Chen and
Chang, 2005, Tam and Lam, 2004, Leong 2008), and the hospitality industry (Chu &
Choi, 2000, Janes & Wisnom, 2003, Qu & sit, 2007) etc.
IPGA Model
Although IPA has been considered as an effective technique, there are researchers
proposing several modified conceptions, based upon two implicit assumptions about
the traditional IPA: (1) attributes performance and importance are two independent
variables, and (2) the relationship between attributes performance and overall
performance is linear and symmetric (Lin, et al., 2009). Therefore, Matzler et al.
(2003) proposed a revised IPA that derives attributes importance from partial
correlation analysis between attributes performance and overall customer satisfaction.
Oliver (1997) argued that confusion arises concerning the most suitable means of
calculating and distributing performance and importance scores along their respective
axes. Pakdil and Aydin (2007) measured airline service quality using SERVQUAL
scores weighted by loadings derived from factor analysis. Deng et al. (2008)
presented a revised IPA which integrates three-factor theory and benchmarking.
Moreover, Lin, et al., (2009) developed the IPGA model, by integrating the strengths
of the IPA and the Gaps analysis. The IPGA technique, unlike the traditional IPA,
replaces the matrixs coordinate axes with the relative importance (RI) and relative
performance (RP) respectively. The results are then displayed on a two-dimensional
grid. The relative importance of the service attributes is plotted as the vertical axis
while the relative performance is plotted as the horizontal axis. When the average
importance of customer perceptions I .j of the jth attribute is equal to the total
average importance of customer perceptions I .. , the relative importance RI of the
attribute is 1, thus the dividing point of the matrixs vertical axis is 1. In addition,
when there is no significant difference between the average performance and
importance of the attribute, the score of the relative performance RP is 0, and the
dividing point of the matrixs horizontal axis is 0. Therefore the intersection
coordinate of IPGA matrix is (0,1). The dividing point (0,1) separates the grid into
four quadrants (Figure 1):
FIGURE 1.
High RI / Low RP
High RI / High RP
Low RI / Low RP
Low RI / High RP
Quadrant III. Attributes located in the quadrant have both low relative importance and
performance
Quadrant IV. The quadrant contains attributes of low relative importance with high
relative performance. Present efforts on the attributes in this quadrant are over-utilized
and management should consider reallocate its resources.
METHODOLOGY
Three dimensional service quality gaps model
In the conceptual Gaps model, the customer gap (gap 5) is the result of the other four
gaps, whereas the listening gap, Gap 1, deals with the differences between customer
expectations and management perceptions. In most service companies, the
management is responsible for the design of service quality standards. Thus
management perceptions of customer expectations will affect service quality designs
and standards and influence service delivery and companys external communications
to customers. An inadequate understanding of customer expectations will ultimately
lead to inferior service performance of the firm. It is therefore critical for the
management to fully understand customers expectations. In this study Gap 1 is
categorized as the construct of management perception. Gaps 2 through 4 are
categorized as the constructs of management execution. To accommodate the
relative importance to the customer, the relative performance level and the
management perceptions of customer expectations, a three dimensional service
quality gaps model is thus developed by extending the IPGA model (Lin, et al., 2009).
By means of the three dimension gaps model, this study tries to further analyze the
causes of service gaps which need to be improved. The three dimensional service
quality gaps model is comprised of three steps as following:
Step 1: Measuring customer perceptions toward the importance of service attributes,
their performance levels and management perceptions for customer
expectations.
Based on the IPGA model developed by Lin et al. (2009), the definitions of the
relative importance of customer perceptions (CRI), the relative performance of
customer perceptions (CRP) and the relative importance of management perceptions
(MRI) are as following:
I. The relative importance for customer perceptions (CRI):
n
importance of the j
th
CP . j = CPij n
i =1
CP .. = CPij n
i =1 j =1
t-test
CP .j > CI .j
Significant
CP .j / CP ..
CP .j < CI .j
Significant
(CP .j / CP .. ) -1
CP .j < CI .j or CP .j > CI .j
Non-significant
MI . j = MI ij m
i =1
the
average
i =1 j =1
smaller than the average importance for the customer perceptions of jth attribute, the
score of the MRI(j) is written as ( MI . j / MI .. ) 1 , indicating a negative gap exists
between management perceptions and customer expectations in the jth attribute. When
there is no significant difference between the average importance of management
perceptions and the average importance of the customer perceptions of the jth attribute,
the score of the MRI(j) is 0, namely there is no gap between management perceptions
and customer expectations in the jth attribute. The calculations of the relative
importance of management perceptions for customer expectations (MRI) are shown as
following (Table 2):
Contingency
t-test
MI .j > CI .j
Significant
MI .j / MI ..
MI .j < CI .j
Significant
( MI .j / MI .. ) -1
MI .j > CI .j or MI .j < CI .j
Non-significant
Step 3: Find the attributes in the eight quadrants of the Three Dimension Service
Quality Gaps
The relative importance of the service attributes is plotted as the vertical axis while
the relative performance is plotted as the horizontal axis. When the average
importance CI . j of the jth attribute is equal to the total average importance CI .. , the
score of relative importance CRI of the attribute is 1, thus the dividing point of the
matrixs vertical axis is 1. When there is no significant difference between the average
performance and importance of the attribute, the score of the relative performance
CRP is 0, and the dividing point of the matrixs horizontal axis is 0. In addition, when
there is no significant difference between the average performance and importance of
the attribute, the score of the relative performance MRI is 0, and the dividing point of
the matrixs 3rd axis is 0.Therefore the intersection coordinate of the three dimensional
matrix is (0,1,0). The dividing point (0,1,0) separates the matrix into eight
quadrants(Figure 2):
CRP
Low
Low
High
High
MRI
Low
CRI
TABLE 3. The Eight Quadrants of the Three Dimension Service Quality Gaps
CRI
CRP
0
<0
0
<1
<0
MRI
0
<0
0
<0
0
<0
0
<0
Results
I. Quality leading attributes
II. Quality risk attributes
III. Leading faulty attributes on
execution
IV. Leading faulty attributes on
perceptions
V. Resources overflow attributes on
perceptions
VI. Resources overflow attributes on
execution
VII. Secondary faulty attributes on
execution
VIII. Secondary faulty attributes on
perceptions
management
management
management
management
management
management
The management applications of the three dimension service quality gaps are as
following:
Quadrant I. Attributes situated in quadrant I are perceived to have high relative
importance, high relative performance and positive management
perceptions of customer expectations. Attributes in this quadrant are
categorized as quality leading attributes. Managers should keep up the
good work and maintain their quality edge.
Quadrant II. Attributes situated in quadrant II are perceived by the customer to have
high relative importance and high relative performance, but a negative
gap exists between management perceptions and customer expectations
(Gap 1 exists). Customers consider these attributes very important and
the firm is currently performing well on those areas. However, the
management may fail to realize their importance and run the risk of
causing service quality gaps in the future. Attributes that fall in this
quadrant are categorized as quality risk attributes.
Quadrant III. Attributes in quadrant III are perceived to have high relative importance
both by the customer and the management, but of low relative
performance. This implies problems causing the service quality gap are
from the construct of management execution (Gap 2 through Gap 4).
Therefore, we named these attributes as leading faulty attributes on
management execution. Improvement efforts should be concentrated on
customer-driven service designs and standards, service delivery and
external communications to customers etc.
Quadrant IV. Attributes in quadrant IV are perceived to have high relative importance
by the customer but with low relative performance and a negative gap
exists between management perceptions and customer expectations. This
implies that problems causing the gap are from the construct of
EMPIRICAL RESEARCH
The following is an example case presented to demonstrate the application of the
three dimensional service quality gaps model.
Scope and object of study and data collection
This research was undertaken at four fine dining restaurants of a hotel with 337 rooms
in Hsin Chu, a city in northern Taiwan. A survey was administered during a two-week
span in Nov., 2009. The questionnaires were designed in two different formats
separately for guests and supervisors and managers. As a result, 204 effective
responses were obtained from the guests, and 49 from the supervisors and managers.
Measures
Customers service quality expectations and perceptions of the restaurants were
measured using DINESERV. The 29-item DINESERV instrument includes 10 items
for tangibles, 5 items for reliability, 3 items for responsiveness, 5 items for assurance
and 5 items for empathy (Stevens et al. 1995). The customer questionnaire consists of
two parts. The first part is designed to measure the respondents expectations and
perceptions regarding the quality of services offered by the restaurants. Customers
were asked to rate the service attributes, using 5-point Likert scale.
Prior to the survey, a pilot test had been conducted to assess the reliability of the
attributes, and to ensure that the wording of the questionnaire was clear. Twenty-nine
questionnaires were completed by master and doctoral students who had dined at
hotel restaurants. Reliability analysis was also applied to test the internal consistency
of each expectation and perception attribute. The results showed that the Cronbachs
coefficients for the expectation and perception attributes are 0.943 and 0.941
respectively, which means they were internally consistent and reliable.
Means analysis for restaurant attributes
According to Table 4, the respondents perceived all restaurant attributes as important
(3.94-4.36) and the mean is 4.19. Among them, has dining areas that are thoroughly
clean, serves your food exactly as you ordered it, and provides an accurate guest
check were considered the most important attributes. On the contrary, respondents
regarded the attributes, has a visually attractive menu that reflects the restaurants
image, has visually attractive building exteriors, and has a menu that is easily
readable as the least important attributes.
The respondents perceptions of the attributes performance ranged from 3.72 to 4.01
with the grand mean at 3.89. has a dining area that is comfortable and easy to more
around and has staff members who are clean, neat and appropriately dressed were
the only two attributes with satisfaction ratings greater than 4. The next highest
ratings included provides an accurate guest check and has a visually attractive
dining area. Conversely, the respondents were least satisfied with the attributes of
has a visually attractive menu that reflects the restaurants image, anticipates your
individual needs and wants, and gives extra effort to handle your special requests.
The managers perceived all restaurant attributes of customer expectations as
important (3.80-4.82) and the mean was 4.39. The most important attributes of
customer expectations perceived by the managers were has dining areas that are
thoroughly clean, is dependable and consistent, and provides an accurate guest
check. In contrast, the least important attributes of customer expectations perceived
by the managers were has visually attractive building exteriors, has a visually
attractive menu that reflects the restaurants image, and makes you feel special.
Gaps analyses
Paired sample t-tests were used to test if such the customer gap, Gap 5, existed. The
average means of service performance perceived by the customers were all lower than
those of their expectations (Table 4). Twenty seven out of twenty nine of these
differences were statistically significant at the 0.05 level. The largest gaps existed in
the attributes such as has employees who can answer your questions completely,
seems to give employees support so that they can do their job well and serves your
food exactly as you ordered it.
Gap 1, the listening gap, is the difference between customer expectations and
management perceptions of those attributes. Independent sample t-tests were used to
test if Gap 1 existed. The managers overestimated the respondents expectations on
twenty five out of the twenty nine attributes (Table 4). Fourteen items showed a
statistically significant difference at the 0.05 level. The largest gaps appeared in such
attributes as has dining areas that are thoroughly clean, is dependable and
consistent, and makes you feel personally safe. However, the managers
underestimated such attributes as has visually attractive building exteriors, makes
you feel special, seems to have the customers best interests at heart and has a
visually attractive menu that reflects the restaurants image.
Mean(CI)
Mean(CP)
Gap 5
Gap 1
CP-CI
MI-CI
Mean(MI)
1.
4.225
3.941
4.286
-0.284***
0.060
2.
3.946
3.838
3.796
-0.108
-0.150
3.
4.216
3.966
4.429
-0.250***
0.213**
4.
4.108
4.010
4.510
-0.098
0.402***
4.123
3.863
4.327
-0.260***
0.204
3.971
3.838
4.143
-0.132**
0.172
3.936
3.721
3.898
-0.216***
-0.038
4.191
4.010
4.347
-0.181***
0.156
4.270
3.946
4.673
-0.324***
0.404***
4.363
3.966
4.816
-0.397***
0.454 ***
4.225
3.897
4.531
-0.328***
0.305 ***
4.240
3.892
4.592
-0.348***
0.352***
4.275
3.936
4.714
-0.338***
0.440***
4.289
3.985
4.694
-0.304***
0.405***
4.328
3.926
4.449
-0.402***
0.121
4.250
3.853
4.469
-0.397***
0.219**
4.206
3.887
4.510
-0.319***
0.304**
4.108
3.814
4.163
-0.294***
0.055
4.250
3.828
4.531
-0.422***
0.281***
4.230
3.868
4.469
-0.363***
0.239***
4.137
3.868
4.286
-0.270***
0.148
appropriately dressed.
5.
6.
7.
8.
9.
4.216
3.882
4.653
-0.333***
0.437***
4.235
3.868
4.286
-0.368***
0.050
4.240
3.833
4.388
-0.407***
0.148
4.172
3.863
4.245
-0.309***
0.073
4.221
3.912
4.122
-0.309***
-0.098
4.142
3.814
4.224
-0.328***
0.082
4.206
3.897
4.469
-0.309***
0.264 **
4.235
3.926
4.184
-0.309***
-0.052
CRI
CRP
1.008
-0.987***
0.000
0.941
0.000
0.000
1.006
-0.981
***
MRI
1.010**
1.028***
0.980
0.000
0.984
-1.007***
**
0.000
0.000
0.947
-1.014
0.939
-1.046***
0.000
1.000
-0.970**
0.000
1.019
-0.986***
1.065***
1.041
-0.981***
1.098***
1.008
-0.999***
1.033**
1.012
-1.000***
1.047***
1.020
-0.989***
1.075***
1.023
-0.976***
1.070***
1.033
-0.991***
0.000
1.014
-1.010***
1.019**
1.003
-1.001***
1.028**
0.980
-1.020***
0.000
1.014
-1.016
1.033**
1.009
-1.006***
1.019**
0.987
-1.006***
0.000
1.006
-1.002***
1.061***
1.010
-1.006***
0.000
1.012
-1.015***
0.000
0.995
-1.007***
0.000
1.007
-0.995***
0.000
0.988
-1.020***
0.000
1.003
-0.999***
1.019**
1.010
-0.991***
0.000
dimension service quality gaps matrix. The dividing point (0,1,0) separates the matrix
into eight quadrants. As shown in Table 6, twenty attributes in quadrant III had high
relative importance perceived both by the customers and the management, but had
low relative performance. This conveys a message that extra work is needed here and
it also implies the problems causing the service quality gaps were from the constructs
of management execution (Gap 2 through Gap 4). These attributes were thus named
as leading faulty attributes on management execution. Improvement efforts should be
concentrated on customer-driven service designs and standards, service delivery and
external communications to customers etc. Seven attributes were situated in quadrant
VII which had low relative importance and performance perceived by the customers,
while the management thought highly of these attributes. These attributes were thus
named as secondary faulty attributes on management execution. Though the attributes
needs to be improved, their priorities are not to be placed overly. Only two attributes
were situated in quadrant V perceived by the customer to have low relative
importance, but high relative performance and a positive gap existed between
management perceptions and customer expectations. These attributes were thus
named as resources overflow attributes on management perceptions. Managers might
have overestimated the importance of these attributes and present efforts on the
attributes have been over-utilized. The restaurant managers are encouraged to pay less
attention to and consider cutting back their resources on these attributes.
CRI
CRP
<0
<1
<1
0
<0
0
MRI
Quad.
III
III
<1
<0
VII
<1
<0
VII
<1
<0
VII
<0
III
<0
III
<0
III
<0
III
<0
III
<0
III
<0
III
<0
<0
III
<0
III
III
<1
<0
<0
III
<0
III
<1
<0
<0
<0
III
<0
III
<1
<0
VII
<0
III
<1
<0
VII
<0
III
<0
III
0
0
VII
VII
III
CONCLUSION
The main purpose of this study was to identify current service gaps by applying the
IPGA technique. A three dimension gaps model was proposed by adding in the
construct of management perception of customer expectation in order to find out the
problems causing the aforementioned gaps. Based on the model, this research
empirically investigates the feasibility of the model at four various restaurant outlets
of a hotel in Taiwan using DINESERV, a 29-item instrument developed in 1995 by
Steven.
The main results are the development of a three dimension model that integrates the
perception of customers and managers. By the three dimension model, the service
quality gaps can be identified and problems causing the gaps further analyzed.
In the empirical research, the intersection coordinate (0,1,0) was applied to divide the
three dimension gaps matrix into eight quadrants. Twenty attributes were identified as
the leading faulty attributes on management execution in quadrant III. Improvement
endeavor should be concentrated on customer-driven service designs and standards,
service delivery and external communications to customers. Seven attributes named
as the secondary faulty attributes on management execution were situated in quadrant
VII. Though the need for improvement on the attributes is certain, their priorities
should not be overly emphasized. Only two attributes named as resources overflow
attributes on management perceptions were situated in quadrant V. The implications
are that the managers might stress excessive importance of these attributes and current
endeavor on the attributes was more than enough. The restaurant managers are
encouraged to pay less attention to these attributes and start allocating their resources
in a reduced manner. To sum it up, all 29 attributes were categorized into three
quadrants, quadrants III, V and VII. Twenty-seven of the attributes fell in quadrants
III and VII which occur due to the problems of execution. It is manifest that certain
rectifying measures need to be taken by the restaurant management with regard to the
service designs and standards, service delivery, such as human resources policies, a
proper employee training system, and external communications to customers such as
appropriate pricing and advertising etc. Fifteen of the attributes showed no significant
difference between the average importance of management perceptions and the
average importance of the customer perceptions. It demonstrates that the restaurant
managers had a clear picture of what their customers expected. The managers
overemphasized the importance of the customers expectations on the other fourteen
attributes. This study presents a framework for further exploring the knowledge about
customer expectations and identifying areas for service improvement and resources
allocation. The IPGA model is an effective tool for measuring service quality with
relative importance and perceptions perceived by the customer. By connecting with
relative management perceptions of customer expectations, the three dimension
service quality gaps model is able to single out not only problems but, more
importantly, who or what caused the problems in service gaps. Therefore, it makes it
more efficient and accurate for the management to develop a successful strategy for
improving service quality.
In this study, the three dimension model can be used to identify the service quality
gaps and then the problems causing the gaps can be further analyzed. But the model
can only distinguish the gaps into problems of management perceptions (gap 1) or
problems of management execution (gap 2~gap 4). For future research, it is suggested
to distinguish from gap 2 to gap 4 for problems of management execution.
REFERENCES
Abalo, J., Varela, J. and Manzano, V. 2007. Importance Values for ImportancePerformance Analysis: A Formula for Spreading Out Values Derived from
Preference Rankings. Journal of Business Research, 60(2), 115-121.
Aigbedo, H. & Parameswaran, R. 2004. Importance-Performance Analysis for
Improving Quality of Campus Food Service. The International Journal of
Quality & Reliability Management, 21(8), 876-896.
Bei, L. T. & Shang, C. F. 2006. Building Marketing Strategies for State-Owned
Enterprises against Private Ones Based on the Perspectives of Customer
Satisfaction and Service Quality. Journal of Retailing and Consumer Services,
13(1), 1-13.
Breiter, D. & Milman, A. 2006. Attendees Needs and Service Priorities in A Large
Convention Center: Application of The Importance-Performance Theory.
Tourism Management, 27(6), 1364-1370.
Bruhn,M. & Grund, M. A. 2000. Theory, development and implementation of national
customer satisfaction indices: The Swiss Index of Customer
Satisfaction(SWICS). Total Quality Management, 11(7), 1017-1028
Cassel, C. & Eklof, J.A. 2001. Modelling customer satisfaction and loyalty on
aggregate levels: Experience from the ECSI pilot study. Total Quality
Management, 12(7), 834-841.
Chen, F. Y. & Chang, Y. H. 2005. Examining Airline Service Quality from A Process
Perspective. Journal of Air Transport Management, 11(2), 79-87.
Chu, R. K. S. & Choi, T. 2000. An importance-performance analysis of hotel selection
factors in the Hong Kong hotel industry: A comparison of business and
leisure travelers. Tourism Management, 21, 363-377.